MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Features Rev. V1 Functional Schematic 2-Way Splitter Single Ended Input and Outputs Single +3.3 Volt Supply 2.8 dB Gain +15 dBmV /Channel Input 4.5 dB Noise Figure Lead-Free 2 mm 8-Lead PDFN Package Halogen-Free "Green" Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MAAM-009811 CATV 2-way active splitter is a GaAs MMIC which exhibits low noise figure and distortion in a lead-free 2mm 8-lead PDFN plastic package. The design features 75 inputs and outputs. The MAAM-009811 is ideally suited for multi-tuner set top boxes, home gateways, and other broadband internet based appliances. Pin Configuration Pin No. Pin Name Description 1 OUT1 RF Output 1 2 N/C No Connection 3 N/C No Connection 4 FB Feedback/Bias 5 IN RF Input The MAAM-009811 is fabricated using M/A-COM Technology's pHEMT process to realize low noise and low distortion. The process features full passivation for robust performance and reliability. Ordering Information 1,2 6 N/C No Connection Part Number Package 7 N/C No Connection MAAM-009811-TR1000 1000 piece reel 8 OUT2 MAAM-009811-TR3000 3000 piece reel MAAM-009811-001SMB Sample Test Board 9 Paddle RF Output 2 3 RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Rev. V1 Electrical Specifications: Freq. = 1000 MHz, T A = 25C, VDD = +3.3 Volts, Z0 = 75 Parameter Test Conditions Units Min. Typ. Max. Gain IN to OUT1, IN to OUT2 dB 1.5 2.8 3.5 Gain Flatness IN to OUT1, IN to OUT2 dB -- 0.6 -- Noise Figure IN to OUT1, IN to OUT2 dB -- 4.5 -- Input Return Loss IN dB -- 12 -- Output Return Loss OUT1, OUT2 dB -- 10 -- Composite Triple Beat, CTB 132 channels, +15 dBmV/channel at the input dBc -- -65 -- Composite Second Order, CSO 132 channels, +15 dBmV/channel at the input dBc -- -55 -- Reverse Isolation OUT1 to IN, OUT2 to IN dB -- 29 -- Output to Output Isolation OUT1 to OUT2 dB -- 22 -- Output Power at 1dB Compression, P1dB IN to OUT1, IN to OUT2 dBm -- 4 -- dBm -- 20 -- mA -- 35 -- mA -- 90 120 Output 3rd Order Intercept Point, OIP3 Output 2nd Order Intercept Point, OIP2 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout IN to OUT1, IN to OUT2 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout IN to OUT1, IN to OUT2 IDD VDD= +3.3 Volts Absolute Maximum Ratings 4,5,6 Parameter Absolute Maximum RF Input Power 12 dBm Voltage 10.0 volts Operating Temperature -20C to +85C Junction Temperature7 +150C Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. 6. These operating conditions will ensure MTTF > 1 x 106 hours. 7. Junction Temperature (TJ) = TC + jc * (V * I) Typical thermal resistance (jc) = 101 C/W. a) For TC = 25C, TJ = 65C @ 3.3 V, 120 mA b) For TC = 85C, TJ = 123 C @ 3.3 V, 115 mA Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. An external protection circuit using an inexpensive anti-parallel diode pair can be used to protect the IC. Please reference application note AN3028 on http://www.macomtech.com for further detail. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Recommended PCB Rev. V1 PCB Land Pattern 2x2mm PDFN, 8-LEAD Outline 0.7 8x0.4 8x0.28 .018 1.3 0.50 Typ. .035 R0.08 Typ. R0.08 Typ. 3x00.2mm Filled Via Thermal Pad Schematic Including Off-Chip Components8 VDD L1 C3 GND L2 C4 OUT 1 C2 R1 R3 R2 1 2mm 8 LD PDFN Off-Chip Component Values 9 Component Value Package C1 - C5 0.01 F 0402 1 H 1210 L2, L3 10 nH 0402 R1, R2 240 0402 R3, R4 300 0402 L1 9 9. L1 supplied from EPCOS, part number B82422A1102K100 8 IN L3 C1 GND C5 OUT 2 R4 8. The exposed pad centered on the package bottom must be connected to ground for RF, DC and thermal considerations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Rev. V1 Typical Performance Curves Gain to 1100 MHz Gain to 3000 MHz 5 10 +25C -20C +85C 4 3 0 2 -5 1 -10 0 0 220 440 660 880 +25C -20C +85C 5 1100 -15 0 600 1200 Frequency (MHz) Input Return Loss 2400 3000 880 1100 Output Return Loss 0 0 +25C -20C +85C -5 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 1800 Frequency (MHz) 0 220 440 660 880 1100 -30 +25C -20C +85C 0 220 Frequency (MHz) 440 660 Frequency (MHz) Noise Figure Reverse Isolation to 3 GHz -25 7 +25C -20C +85C +25C -20C +85C 6 -30 5 -35 4 3 -40 2 -45 0 600 1200 1800 Frequency (MHz) 2400 3000 1 0 220 440 660 880 1100 Frequency (MHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Rev. V1 Typical Performance Curves Out to Out Isolation to 1 GHz Out to Out Isolation to 3 GHz -22 -20 +25C -20C +85C -23 -25 -24 -30 -25 -26 -35 -27 -28 -29 +25C -20C +85C -40 0 220 440 660 880 1100 Frequency (MHz) -45 0 600 1200 1800 2400 3000 Frequency (MHz) Lead-Free 2 mm 8-Lead PDFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support