Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 1 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Table of Contents
Introduction ................................................................................................................................ 2
T200-Ident-Printer (Thermal Transfer) ....................................................................................... 3
Cable Identification markers ................................................................................................... 3
T200-Ident-Printer (Thermal Transfer) ....................................................................................... 4
Cable Identification Continuous Tube ..................................................................................... 4
T200-Ident-Printer (Thermal Transfer) ....................................................................................... 5
Labels ..................................................................................................................................... 5
T208M-Printer and T212M-Printer (Thermal Transfer) (Printer Discontinued) ........................... 6
Cable Identification markers ................................................................................................... 6
Labels ..................................................................................................................................... 6
T200-Label-Printer (Thermal Transfer) ...................................................................................... 7
Labels (Only) .......................................................................................................................... 7
TE3112-Printer (Recommended) and TE3124-Printer (On request) (Thermal Transfer) ........... 8
Cable Identification markers ................................................................................................... 8
TE3112-Printer (Recommended) and TE3124-Printer (On request) (Thermal Transfer) ........... 9
Cable Identification Continuous Tube ..................................................................................... 9
TE3112-Printer and TE3124-Printer (Thermal Transfer).......................................................... 10
Labels ................................................................................................................................... 10
T312M-Printer (Printers Discontinued) and T312Mi-Printer (Thermal Transfer) ...................... 11
Cable Identification markers ................................................................................................. 11
T312M-Printer and T312Mi-Printer (Thermal Transfer) ............................................................ 12
Labels ................................................................................................................................... 12
T6112DS-Printer (Thermal Transfer) ....................................................................................... 12
T6112DS-Printer (Thermal Transfer) ....................................................................................... 14
Cable Identification Markers and Continuous Tube ................................................................. 14
T612M-DS-Printer (Thermal Transfer) (Printer Discontinued) ................................................. 15
TTD03E / TTD04E / TTD05E / TTD06E-Printer (Printer Discontinued) ................................... 16
(Thermal Transfer) ................................................................................................................... 16
Labels (only) ......................................................................................................................... 16
TTD03E / TTD04E / TTD05E / TTD06E-Printer (Printer Discontinued) ................................... 17
(Thermal Transfer) ................................................................................................................... 17
Labels (only) ......................................................................................................................... 17
TTP5200 / TTP5300 Printer (Thermal Transfer) (Printer Discontinued) .................................. 18
TTP5200 / TTP5300 Printer (Thermal Transfer) (Printer Discontinued) .................................. 19
T408M-Printer (Thermal Transfer) (Printer Discontinued) ........................................................ 20
T308S / T312S-Printer (Thermal Transfer) (Printer Discontinued) ........................................... 21
Labels (only) ......................................................................................................................... 21
T2000CT-Printer (Thermal Transfer) (Printer Discontinued) .................................................... 22
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 2 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
LQ870 (Dot Matrix) (Printer Discontinued) ............................................................................... 23
LQ590 (Dot Matrix) .................................................................................................................. 23
Lexmark 2390 (Dot Matrix) (Printer Discontinued) ................................................................... 24
AM6310 / AM6310D (Dot Matrix) (Printer Discontinued) ......................................................... 24
OKI-380 (Dot Matrix) (Printer Discontinued) ............................................................................ 25
Epson WF-R5190DW (Inkjet) .................................................................................................. 26
Epson B-310N (Inkjet) (Printer Discontinued) .......................................................................... 26
Epson Stylus Photo R285 (Inkjet) (Printer Discontinued) ......................................................... 26
Epson Stylus Colour 1520 (Inkjet) (Printer Discontinued) ........................................................ 26
BTT-02 (card printer) ............................................................................................................... 27
Ribbon ordering details ............................................................................................................ 28
Cable Identification markers (25.4MM ID core) .................................................................... 28
Cable Identification markers (12.7MM ID core) .................................................................... 28
Labels (25.4MM ID core) ...................................................................................................... 29
Labels (12.7MM ID core) ...................................................................................................... 29
BTT-02 (card printer) ............................................................................................................... 30
Dot Matrix Inks ordering details ............................................................................................... 30
Trademarks .............................................................................................................................. 30
Related Documents: ................................................................................................................ 30
Introduction
It is essential that the combination of Printers, Products and Ribbons or Inks are correct, to
ensure the best print quality and mark permanence.
Each combination of Printer, Product, Ribbon and Ink have been evaluated for Print quality and
tested for mark permanence. Any deviation from the information contained in this document
will invalidate any assurances of print quality and mark permanence.
This document supersedes all previous documents detailing Identification printer, ribbon and
product combinations.
When selecting a ribbon width, it is essential that the ribbon width covers the entire area of the
label, to avoid missed print and damage to the print head.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 3 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T200-Ident-Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
CM-SCE-TP
D-SCE
D-SCE
HLXNEL
HS
HS
HS
HT-SCE
HT-SCE (Black)
HX-SCE
MultiMark
RPS
RTSL
Shrinkmark
NBC-SCE
TMS-SCE and TMS-SCE 2X
TMS-SCE (Black)
TMS-90-SCE
ZHD-SCE
ZTSL
When printing CM-SCE-TP, the smooth side of the marker must be used to print onto when using a Thermal
Transfer printer.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 4 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T200-Ident-Printer (Thermal Transfer)
Cable Identification Continuous Tube
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE-FLAT-SP Sizes 38.1 and above
1966-RIBBON
D-SCE-FLAT-SP Sizes 25.0 and below
LBF-2000P-RIBBON-1966-MED (For print width of
60mm or less)
E4
TMS-RJS-RIBBON-4RPSCE (For Optimal
performance)
E4
1966-RIBBON (For Superior performance)
HXCT Sizes 25.4 and below
LBF-2000P-RIBBON-1966-MED
HXCT Sizes 25.4 and above
1966-RIBBON
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
2000P-RIBBON-4TT-NAR
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
2000P-RIBBON-4TT-MED
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
TMS-RJS-RIBBON-4RPSCE
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
(Black)
2000P-RIBBON-4AG-NAR (Silver),
2000P-RIBBON-WH-NAR (White)
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
(Black)
2000P-RIBBON-4AG-MED (Silver),
2000P-RIBBON-WH-MED (White)
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
(Black)
TMS-RJS-RIBBON-4AG (Silver),
T300-RIBBON-WH (White)
WM-SCE
LBF-2000P-RIBBON-1966-MED
ZHDCT Sizes 38.1 and above
1966-RIBBON
ZHDCT Sizes 25.0 and below
LBF-2000P-RIBBON-1966-MED (For print width of
60mm or less)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 5 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T200-Ident-Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-10
Destructible Polyethylene (TN)
1330-0607-10
EET…P-8A
For labels with liner width of 60mm or smaller:
EET…P-9
TTB-060SC/300
EET…P-4
For labels with liner width of 76mm to 60mm:
TTB-076SC/300
EET…V-9
For labels with liner width of 84mm to 76mm:
SET…PSL
TTB-084SC/300
For labels with liner width of 110mm to 84mm:
TTB-110SC/300
HPK
1330-0607-10
IKT…PV-4
For labels with liner width of 60mm or smaller:
IKT…PY-9
TTB-060SC/450AQ529
IMT…PV-4
For labels with liner width of 90mm to 60mm:
IMT…PY-9
TTB-090SC/360-AQ529
EET…PY-9
For labels with liner width of 110mm to 90mm:
EET…V-8A
TTB-110SC/300AQ529
EET…G-4
EET…V-4-W
EET-SL…V-4-W
EET…K-9
PPT…DF-4
PPT…DF-9
KTT
Kapton® polyimide (T1K/T2K )
1330-0619-10
Nylon cloth (NC)
1330-0607-10
Paper (EP)
1330-0600-10
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
1330-0607-10
SB Plus
TMS-RJS-RIBBON-4RPSCE
SP
1330-0607-10
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-10
WV
1330-0607-10
WPM
1330-0607-10
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 6 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T208M-Printer and T212M-Printer (Thermal Transfer) (Printer Discontinued)
Cable Identification markers
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE
TMS-101-RIBBON-4DSCE
HLXNEL*
T200-RIBBON-1966
HPK
1330-0607-T200
HT-SCE
TMS-101-RIBBON-4HT
HT-SCE (Black)
T200-RIBBON-WH-4HT
HX-SCE*
T200-RIBBON-1966
NBC-SCE
TMS-101-RJS-RIBBON-4HT
RPS
TMS-101-RIBBON-4RPSCE
Shrinkmark
TMS-101-RIBBON-4RPSCE
TMS-SCE and TMS-SCE 2X
TMS-101-RIBBON-4RPSCE
TMS-SCE (Black)
TMS-101-RIBBON-4AG (silver) T200-RIBBON-WH (White)
TMS-90-SCE*
T200-RIBBON-1966
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-T200
Destructible Polyethylene (TN)
1330-0607-T200
EP Paper Labels
1330-0600-T200
Kapton® polyimide (T1K/T2K/TSK/T2Y)
1330-0619-T200
Nylon Cloth (NC)
1330-0607-T200
Polyesters (WP/MP/HW/HM/MV/HMM)
1330-0607-T200
Self Lams (SBP)
TMS-101-RIBBON-4RPSCE
Self Lams (PVF)
1330-3300-101TT
Self Lams (SP)
1330-0607-T200
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-101TT
White Vinyl (WV)
1330-0607-T200
* HX-SCE, HLXNEL & TMS-90-SCE for T212M only
Note: T208M-PRINTER has been superseded by T200-LABEL-PRINTER, for label products only.
Note: T212M-PRINTER has been superseded by the T200-IDENT-PRINTER, for both Label and cable Ident
products.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 7 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T200-Label-Printer (Thermal Transfer)
Labels (Only)
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-T200
Destructible Polyethylene (TN)
1330-0607-T200
EET (P-8A, P-9, P-4)
1330-TTB-T200
EET (PY-9)
1330-TTB-T200
EET (G-4)
1330-TTB-T200
EET (V-8A, V-4-W, SL…V-4-W)
1330-TTB-T200
EET (V-9)
1330-TTB-T200
EET (K-9)
1330-TTB-T200
HPK
1330-0607-T200
Kapton (T1K/T2K)
1330-0619-T200
KTT
1330-TTB-T200
Nylon Cloth (NC)
1330-0607-T200
Paper (EP)
1330-0600-T200
Polyesters (WP/MP/HW/HM/MV/HMM)
1330-0607-T200
PPT
1330-TTB-T200
Self Lams (SBP)
TMS-101-RIBBON-4RPSCE
Self Lams (PVF)
1330-3300-101TT
Self Lams (SP)
1330-0607-T200
SOLAR LABELS
1330-0607-T200
Tedlar (TTVF/PVF)
1330-3300-101TT
White Vinyl (WV)
1330-0607-T200
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 8 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TE3112-Printer (Recommended) and TE3124-Printer (On request) (Thermal
Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
STANDARD RIBBON
CM-NMX (TE3112 only)
1330-3300-10
CM-SCE-TP
1966-RIBBON
D-SCE
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE
1966-RIBBON (For Superior performance)
HL
1966-RIBBON (For Superior performance)
HL
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
HLX
1966-RIBBON
HLX
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
MultiMark
TMS-RJS-RIBBON-4RPSCE
HTCM-SCE-TP
TMS-RJS-RIBBON-4HT
HT-SCE
TMS-RJS-RIBBON-4HT
HT-SCE (Black)
T300-RIBBON-WH-4HT
HS/HC
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
HS/HC
1966-RIBBON (For Superior performance)
HS/HC
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
HX
1966-RIBBON
HX-SCE
1966-RIBBON
NBC-SCE
TMS-RJS-RIBBON-4HT
NCM-SCE-TP
1966-RIBBON
NHT-SCE
TMS-RJS-RIBBON-4HT
RPS
TMS-RJS-RIBBON-4RPSCE
RTSL
TMS-RJS-RIBBON-4RPSCE
Shrinkmark
TMS-RJS-RIBBON-4RPSCE
TMS-SCE and TMS-SCE 2X
TMS-RJS-RIBBON-4RPSCE
TMS-SCE (Black)
TMS-RJS-RIBBON-4AG (Silver) T300-RIBBON-WH (White)
TMS-90-SCE
1966-RIBBON
UV-SCE
T300-UV-SCE-RIBBON
ZHD-SCE
1966-RIBBON
ZTSL
1966-RIBBON
When printing CM-SCE-TP, CM-NMX, NCM-SCE-TP or HTCM-SCE-TP, the smooth side of the marker must be
used to print onto, when using a Thermal Transfer printer.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 9 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TE3112-Printer (Recommended) and TE3124-Printer (On request) (Thermal
Transfer)
Cable Identification Continuous Tube
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE-SP
TMS-RJS-RIBBON-4DSCE
D-SCE-FLAT-SP Sizes 25.0 and below
LBF-2000P-RIBBON-1966-MED
D-SCE-FLAT-SP Sizes 38.1 and above
1966-RIBBON
HXCT Sizes 25.4 and below
LBF-2000P-RIBBON-1966-MED
E4
TMS-RJS-RIBBON-4RPSCE (For Optimal
performance)
E4
1966-RIBBON (For Superior performance)
HXCT Sizes 25.4 and above
1966-RIBBON
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
2000P-RIBBON-4TT-NAR
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
2000P-RIBBON-4TT-MED
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
TMS-RJS-RIBBON-4RPSCE
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
(Black)
2000P-RIBBON-4AG-NAR (Silver),
2000P-RIBBON-WH-NAR (White)
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
(Black)
2000P-RIBBON-4AG-MED (Silver),
2000P-RIBBON-WH-MED (White)
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
(Black)
TMS-RJS-RIBBON-4AG (Silver),
T300-RIBBON-WH (White)
WM-SCE
LBF-2000P-RIBBON-1966-MED
ZHDCT sizes 38.1
1966-RIBBON
ZHDCT sizes 25.4 and bellow
LBF-2000P-RIBBON-1966-MED (For print width
of 60mm or less)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 10 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TE3112-Printer and TE3124-Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-10
Destructible Polyethylene (TN)
1330-0607-10
EET…P-8A
EET…P-9
EET…P-4
EET…V-9
SET…PSL
For labels with liner width of 60mm or smaller: TTB-060SC/300
For labels with liner width of 76mm to 60mm: TTB-076SC/300
For labels with liner width of 84mm to 76mm: TTB-084SC/300
For labels with liner width of 110mm to 84mm: TTB-110SC/300
IKT…PV-4
IKT…PY-9
IMT…PV-4
IMT…PY-9
EET…G-4
EET…PY-9
EET…V-8A
EET…V-4-W
EET-SL…V-4-W
EET…K-9
PPT…DF-4, DF-9
KTT
For labels with liner width of 60mm or smaller :
TTB-060SC/450AQ529
For labels with liner width of 90mm to 60mm:
TTB-090SC/360-AQ529
For labels with liner width of 110mm to 90mm:
TTB-114SC/360AQ529
HPK
1330-0607-10
Kapton® polyimide (T1K/T2K/TSK/T2Y)
1330-0619-10
KMT
TTB-110SC/300WH
Nylon Cloth (NC)
1330-0607-10
Paper (EP)
1330-0600-10
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
1330-0607-10
Self Lams (SBP)
TMS-RJS-RIBBON-4RPSCE
Self Lams (PVF)
1330-3300-10
Self Lams (SP)
1330-0607-10
SOLAR LABELS
1330-0607-10
TP Tape
1330-0607-10
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-10
White Vinyl (WV)
1330-0607-10
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 11 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T312M-Printer (Printers Discontinued) and T312Mi-Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
STANDARD RIBBON
CM-NMX
1330-3300-10
CM-SCE-TP
1966-RIBBON
D-SCE
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE
1966-RIBBON (For Superior performance)
¹HL
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
¹HL
1966-RIBBON (For Superior performance)
HLX
1966-RIBBON
HS/HC
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
HS/HC
1966-RIBBON (For Superior performance)
HTCM-SCE-TP
TMS-RJS-RIBBON-4HT
HT-SCE
TMS-RJS-RIBBON-4HT
HT-SCE (Black)
T300-RIBBON-WH-4HT (white)
HX
1966-RIBBON
HX-SCE
1966-RIBBON
NBC-SCE
TMS-RJS-RIBBON-4HT
NCM-SCE-TP
1966-RIBBON
NHT-SCE
TMS-RJS-RIBBON-4HT
RPS
TMS-RJS-RIBBON-4RPSCE
Shrinkmark
TMS-RJS-RIBBON-4RPSCE
TMS-SCE and TMS-SCE-2X
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
* TMS-SCE and TMS-SCE 2X
*1966-RIBBON (For Superior performance)
TMS-SCE (Black)
TMS-RJS-RIBBON-4AG (silver) T300-RIBBON-WH (White)
TMS-90-SCE
1966-RIBBON
UV-SCE
T300-UV-SCE-RIBBON
ZHD-SCE
1966-RIBBON
¹Note: HL sizes HL253 and HL203 can be printed on TE3112 only
Note: T312M is superseded by the T312Mi
*Note: When printing with 1966-RIBBON. Select High energy and half speed check boxes. This feature is only
available in WinTotal 5.4.03 or higher
When printing CM-SCE-TP, HTCM-SCE-TP, NCM-SCE-TP or CM-NMX, the smooth side of the marker must be
used to print onto, when using a Thermal Transfer printer.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 12 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T312M-Printer and T312Mi-Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-10
Destructible Polyethylene (TN)
1330-0607-10
HPK
1330-0607-10
Kapton® polyimide (T1K/T2K/TSK/T2Y)
1330-0619-10
Nylon Cloth (NC)
1330-0607-10
Paper (EP)
1330-0600-10
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
1330-0607-10
Self Lams (SBP)
TMS-RJS-RIBBON-4RPSCE
Self Lams (PVF)
1330-3300-10
Self Lams (SP)
1330-0607-10
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-10
TP Tape
1330-0607-10
White Vinyl (WV)
1330-0607-10
T6112DS-Printer (Thermal Transfer)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 13 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Cable Identification Markers and Continuous Tube
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE
1966-RIBBON (For Superior performance)
D-SCE-SP
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE-SP
1966-RIBBON (For Superior performance)
D-SCE-SP
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or
less).
D-SCE-FLAT-SP Sizes 38.1 and above
1966-RIBBON
D-SCE-FLAT-SP Sizes 25.0 and below
LBF-2000P-RIBBON-1966-MED
E4
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
E4
1966-RIBBON (For Superior performance)
HT-SCE
TMS-RJS-RIBBON-4HT
HXCT Sizes 25.4 and below
LBF-2000P-RIBBON-1966-MED
HXCT, sizes 38.1 and above
1966-RIBBON
HX-SCE
1966-RIBBON
NBC-SCE
TMS-RJS-RIBBON-4HT
NHT-SCE
TMS-RJS-RIBBON-4HT
RPS
TMS-RJS-RIBBON-4RPSCE
RTSL
TMS-RJS-RIBBON-4RPSCE
Shrinkmark
TMS-RJS-RIBBON-4RPSCE
TMS-SCE (2X)
TMS-RJS-RIBBON-4RPSCE
TMS-SCE (Black)
TMS-RJS-RIBBON-4AG (Silver) T300-RIBBON-WH (White)
TMS-90-SCE
1966-RIBBON
TTMS, TTMS-2X & TTMS-MP sizes 2.4
to 12.7
2000P-RIBBON-4TT-NAR
TTMS, TTMS-2X & TTMS-MP sizes
19.0 and 25.4
2000P-RIBBON-4TT-MED
TTMS, TTMS-2X & TTMS-MP sizes
38.1 and above
TMS-RJS-RIBBON-4RPSCE
TTMS, TTMS-2X & TTMS-MP sizes 2.4
to 12.7 (Black)
2000P-RIBBON-4AG-NAR (Silver),
2000P-RIBBON-WH-NAR (White)
TTMS, TTMS-2X & TTMS-MP sizes
19.0 and 25.4 (Black)
2000P-RIBBON-4AG-MED (Silver),
2000P-RIBBON-WH-MED (White)
TTMS, TTMS-2X & TTMS-MP sizes
38.1 and above (Black)
TMS-RJS-RIBBON-4AG (Silver), T300-RIBBON-WH (White)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 14 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T6112DS-Printer (Thermal Transfer)
Cable Identification Markers and Continuous Tube
COMPATIBLE PRODUCTS
(Continued)
STANDARD RIBBON
(Continued)
ZTSL
1966-RIBBON
ZHD-SCE
1966-RIBBON
ZHDCT sizes 38.1
1966-RIBBON
ZHDCT sizes 25.4 and bellow
1966-RIBBON LBF-2000P-RIBBON-1966-MED (For print
width of 60mm or less)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 15 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T612M-DS-Printer (Thermal Transfer) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE
TMS-RJS-RIBBON-4DSCE (For Optimal
performance)
D-SCE
1966-RIBBON (For Superior performance)
HT-SCE
TMS-RJS-RIBBON-4HT
HX-SCE
1966-RIBBON
NBC-SCE
TMS-RJS-RIBBON-4HT
RPS
TMS-RJS-RIBBON-4RPSCE
Shrinkmark
TMS-RJS-RIBBON-4RPSCE
TMS-SCE
TMS-RJS-RIBBON-4RPSCE
TMS-SCE-2X
TMS-RJS-RIBBON-4RPSCE
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 16 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TTD03E / TTD04E / TTD05E / TTD06E-Printer (Printer Discontinued)
(Thermal Transfer)
Labels (only)
COMPATIBLE PRODUCTS
STANDARD RIBBON
IKT…PV-4
IKT…PY-9
IMT…PV-4
For labels with liner width of 60mm to 40mm:
TTB-060SC/450AQ529S
IMT…PY-9
EET…PY-9
EET…G-4
For labels with liner width of 90mm to 76mm:
TTB-090SC/36-AQ529
EET…V-8A
For labels with liner width of 110mm to 90mm:
TTB-110SC/300AQ529S
EET…V-4-W
For labels with liner width of 114mm to 110mm:
TTB-114SC/360AQ529
EET-SL…V-4-W
EET…K-9
For labels with liner width of 166mm to 165mm:
TTB-166SC/360AQ529
PPT…DF-4
When "Ink in" is required delete "S" (TTB-
040SC/450AQ529)
PPT…DF-9
For labels with liner width of 60mm or smaller:
TTB-060SC/300
EET…P-8A
For labels with liner width of 76mm to 60mm:
TTB-076SC/300
EET…P-9
For labels with liner width of 84mm to 76mm:
TTB-084SC/300
EET…P-4
For labels with liner width of 110mm to 84mm:
TTB-110SC/300
For labels with liner width of 128mm to 110mm:
TTB-128SC/300
EET…V-9
For labels with liner width of 145mm to 128mm:
TTB-145SC/300
SET…PSL
For labels with liner width of 170mm to 145mm:
TTB-170SC/300
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 17 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TTD03E / TTD04E / TTD05E / TTD06E-Printer (Printer Discontinued)
(Thermal Transfer)
Labels (only)
COMPATIBLE PRODUCTS
(Continued)
STANDARD RIBBON
(Continued)
PPT…DF-4
For labels with liner width of 76mm or smaller:
TTB-076SC/300WH
PPT…DF-9
For labels with liner width of 84mm to 76mm:
TTB-084SC/300WH
KMT
For labels with liner width of 110mm to 84mm:
TTB-110SC/300WH
EP
For labels with liner width of 145mm to 110mm:
TTB-145SC/300WH
For labels with liner width of 170 to 145mm:
TTB-170SC/300WH
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 18 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TTP5200 / TTP5300 Printer (Thermal Transfer) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
IKT…PV-4
IKT…PY-9
IMT…PV-4
For labels with liner width of 60mm to 40mm:
TTB-060SC/450AQ529S
IMT…PY-9
EET…PY-9
For labels with liner width of 90mm to 76mm:
TTB-090SC/360-AQ529
EET…V-8A
EET…G-4
For labels with liner width of 110mm to 90mm:
TTB-110SC/300AQ529S
EET…V-4-W
For labels with liner width of 114mm to 110mm:
TTB-114SC/360-AQ529
EET-SL…V-4-W
EET…K-9
For labels with liner width of 166mm to 165mm:
TTB-166SC/360AQ529S
PPT…DF-4
When "Ink in" is required delete "S" (TTB-040SC/450AQ529)
PPT…DF-9
For labels with liner width of 60mm or smaller:
TTB-060SC/300
EET…P-8A
For labels with liner width of 76mm to 60mm:
TTB-076SC/300
EET…P-9
For labels with liner width of 84mm to 76mm:
TTB-084SC/300
EET…P-4
For labels with liner width of 110mm to 84mm:
TTB-110SC/300
For labels with liner width of 128mm to 110mm:
TTB-128SC/300
EET…V-9
For labels with liner width of 145mm to 128mm:
TTB-145SC/300
SET…PSL
For labels with liner width of 170mm to 145mm:
TTB-170SC/300
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 19 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
TTP5200 / TTP5300 Printer (Thermal Transfer) (Printer Discontinued)
COMPATIBLE PRODUCTS
(Continued)
STANDARD RIBBON
(Continued)
PPT…DF-4
For labels with liner width of 76mm or smaller:
TTB-076SC/300WH
PPT…DF-9
For labels with liner width of 84mm to 76mm:
TTB-084SC/300WH
KMT
For labels with liner width of 110mm to 84mm:
TTB-110SC/300WH
EP
For labels with liner width of 145mm to 110mm:
TTB-145SC/300WH
For labels with liner width of 170mm to 145mm:
TTB-170SC/300WH
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 20 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T408M-Printer (Thermal Transfer) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-10
Destructible Polyethylene (TN)
1330-0607-10
D-SCE
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE
1966-RIBBON (For Superior performance)
HL
TMS-RJS-RIBBON-4RPSCE
HLX
1966-RIBBON
HPK
1330-0607-10
HT-SCE
TMS-RJS-RIBBON-4HT
HT-SCE (Black)
T300-RIBBON-WH-4HT
Kapton® polyimide (T1K/T2K/TSK/T2Y)
1330-0619-10
KTT
TTB-114SC/360
NBC-SCE
TMS-RJS-RIBBON-4HT
Nylon Cloth (NC)
1330-0607-10
Paper (EP)
1330-0600-10
Polyesters
(WP/MP/CP/HW/HM/MV/HMM)
1330-0607-10
RPS
TMS-RJS-RIBBON-4RPSCE
Self-Lams (SBP)
TMS-RJS-RIBBON-4RPSCE
Self-Lams (PVF)
1330-3300-10
Self-Lams (SP)
1330-0607-10
Shrinmark
TMS-RJS-RIBBON-4RPSCE
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-10
TMS-SCE and TMS-SCE 2X
TMS-RJS-RIBBON-4RPSCE
TMS-SCE (Black)
T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG
(Silver)
TMS-90-SCE
1966-RIBBON
TP Tape
1330-0607-10
White Vinyl (WV)
1330-0607-10
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 21 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T308S / T312S-Printer (Thermal Transfer) (Printer Discontinued)
Labels (only)
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
1330-0607-10
Destructible Polyethylene (TN)
1330-0607-10
HPK
1330-0607-10
Kapton® polyimide (T1K/T2K/TSK/T2Y)
1330-0619-10
KTT
TTB-114SC/360-AQ529
Nylon Cloth (NC)
1330-0607-10
Paper (EP)
1330-0600-10
Self-Lams (SBP)
TMS-RJS-RIBBON-4RPSCE
Self-Lams (PVF)
1330-3300-10
Self-Lams (SP)
1330-0607-10
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
1330-0607-10
Tedlar® polyvinyl fluoride (TTVF/PVF)
1330-3300-10
TP Tape
1330-0607-10
White Vinyl (WV)
1330-0607-10
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 22 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
T2000CT-Printer (Thermal Transfer) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
D-SCE-FLAT-SP Sizes 38.1 and above
1966-RIBBON
D-SCE-FLAT-SP Sizes 25.0 and below
LBF-2000P-RIBBON-1966-MED
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
2000P-RIBBON-4TT-NAR
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
2000P-RIBBON-4TT-MED
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
TMS-RJS-RIBBON-4RPSCE
HXCT Sizes 25.4 and below
LBF-2000P-RIBBON-1966-MED
HXCT Sizes 25.4 and above
1966-RIBBON
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 23 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
LQ870 (Dot Matrix) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
RPS
TMS-SYSTEM-SIX-RIBBON-A
D-SCE
TMS-SYSTEM-SIX-RIBBON-A
CM-SCE
TMS-SYSTEM-SIX-RIBBON-A
NCM-SCE
TMS-SYSTEM-SIX-RIBBON-A
Shrinkmark
TMS-SYSTEM-SIX-RIBBON-A
NMX (Nomex)
1330-0037-00
Raymark (RMK6)
TMS-SYSTEM-SIX-RIBBON-A
Tedlar (DMVF)
1330-0037-00
Self Lams (TW/PV)
1330-0037-00
Kapton (K)
1330-0037-00
Vinyl Cloth (C)
1300-0037-00
Polyesters (E/M)
1330-0037-00
LQ590 (Dot Matrix)
COMPATIBLE PRODUCTS
STANDARD RIBBON
RPS
TMS-LQ590-RIBBON
D-SCE
TMS-LQ590-RIBBON
CM-SCE
TMS-LQ590-RIBBON
CM-SCE
LQ590-RIBBON
NCM-SCE
TMS-LQ590-RIBBON
Shrinkmark
TMS-LQ590-RIBBON
Raymark (RMK6)
TMS-LQ590-RIBBON
Raymark (RMK6)
LQ590-RIBBON
When printing CM-SCE, NMX or NCM-SCE, the dimpled side of the marker must be used to print onto,
when using a Dot Matrix printer.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 24 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Lexmark 2390 (Dot Matrix) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
RPS
TMS-SYSTEM-SIX-RIBBON-B
D-SCE
TMS-SYSTEM-SIX-RIBBON-B
CM-SCE
TMS-SYSTEM-SIX-RIBBON-B
NCM-SCE
TMS-SYSTEM-SIX-RIBBON-B
Shrinkmark
TMS-SYSTEM-SIX-RIBBON-B
Raymark (RMK6)
TMS-SYSTEM-SIX-RIBBON-B
AM6310 / AM6310D (Dot Matrix) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
RPS
D-SCE
CM-SCE
Raymark (RMK6)
1892BK04-RIBBON
HL
HS/HC
MultiMark (HM)
Shrinkmark
NMX (Nomex)
Tedlar (DMVF)
Self Lams (TW/PV)
Kapton (K)
1892BK03-HIGH-PERF-RIBBON
HX
HX-SCE
HLX
Vinyl Cloth (CW)
Polyesters (E/M)
When printing CM-SCE, NMX or NCM-SCE, the dimpled side of the marker must be used to print onto,
when using a Dot Matrix printer.
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 25 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
OKI-380 (Dot Matrix) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD RIBBON
HL
HS
18910000-OKI380-RIBBON
HX
MultiMark (HM)
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 26 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Epson WF-R5190DW (Inkjet)
COMPATIBLE PRODUCT
STANDARD INK
Raymark A4 sheets
DURA BRITE ULTRA (Epson ink)
Epson B-310N (Inkjet) (Printer Discontinued)
COMPATIBLE PRODUCT
STANDARD INK
Raymark A4 sheets
DURA BRITE ULTRA (Epson ink)
(Recommended for enhanced humidity resistance)
Epson Stylus Photo R285 (Inkjet) (Printer Discontinued)
COMPATIBLE PRODUCT
STANDARD INK
Raymark A4 sheets
Claria Photographic ink (Epson ink)
Epson Stylus Colour 1520 (Inkjet) (Printer Discontinued)
COMPATIBLE PRODUCTS
STANDARD INK
Raymark 1
Chess (Black). Abacus (Cyan, Magenta,
Yellow). Epson ink
Raymark A4 Sheets
Chess (Black). Abacus (Cyan, Magenta,
Yellow). Epson ink
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 27 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
BTT-02 (card printer)
COMPATIBLE PRODUCTS
STANDARD RIBBON
BGS
BGF
BBB-060SC/200 (black).
BET
BBB-060WE/200 (white).
BTS
BBB-060BL/200 (blue).
BBK
BBB-060RT/200 (red).
BBL
BBS
BKB
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 28 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Ribbon ordering details
Cable Identification markers (25.4MM ID core)
DESCRIPTION
TE PART NUMBER
1330-3300-10
980892-000
1966-RIBBON
F55931-000
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
6-1768383-4
2000P-RIBBON-4TT-MED
893803-000
2000P-RIBBON-4TT-NAR
277493-000
TMS-RJS-RIBBON-4DSCE
311292-000
TMS-RJS-RIBBON-4RPSCE
557721-000
TMS-RJS-RIBBON-4HT
754073-000
T300-RIBBON-WH-4HT (White)
154739-000
2000P-RIBBON-WH-MED (White)
094514-000
2000P-RIBBON-WH-NAR (White)
530304-000
TMS-RJS-RIBBON-4AG (Silver)
124503-000
2000P-RIBBON-4AG-MED
351013-000
2000P-RIBBON-4AG-NAR
346933-000
1330-0607-10
742412-000
T300-UV-SCE-RIBBON
EC8932-000
Cable Identification markers (12.7MM ID core)
DESCRIPTION
TE PART NUMBER
TMS-101-RIBBON-4DSCE
505478-000
T200-RIBBON-1966
D60849-000
1330-0607-T200
E45478-000
TMS-101-RIBBON-4HT
746617-000
T200-RIBBON-WH-4HT (White)
086961-000
TMS-101-RIBBON-4RPSCE
310109-000
TMS-101-RIBBON-4AG (Silver)
252557-000
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 29 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Labels (25.4MM ID core)
DESCRIPTION
TE PART NUMBER
1330-0607-10
742412-000
TTB-060SC/300
2-1768049-6
TTB-076SC/300
3-1768049-0
TTB-084SC/300
C75514-000
TTB-110SC/300
3-1768049-6
TTB-060SC/450AQ529
2-1768049-7
TTB-090SC/360-AQ529
3-1768049-4
TTB-110SC/300AQ529
3-1768049-7
1330-0619-10
952888-000
TTB-110SC/300WH
3-1768049-8
1330-0600-10
143060-000
TMS-RJS-RIBBON-4RPSCE
557721-000
1330-3300-10 (For labels with liner width of 110mm or smaller)
980892-000
1330-3300-15 (For labels with liner width of 110mm to 165mm)
562492-000
Labels (12.7MM ID core)
DESCRIPTION
TE PART NUMBER
1330-0607-T200
E45478-000
1330-0619-T200
C49013-000
TMS-101-RIBBON-4RPSCE
310109-000
1330-3300-101TT
C95590-000
1330-TTB-T200
1-1768384-8
1330-0600-T200
C36369-000
Doc. No: 411-121005
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Issue: 19
Date: July 2015
Author: I. Ridgeway
Print date: 7-Jul-15
Issue date: Jul 2015:
Page: 30 of 30
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
BTT-02 (card printer)
DESCRIPTION
TE PART NUMBER
BBB-060SC/200 (black).
1-1768016-4
BBB-060WE/200 (white).
1-1768016-5
BBB-060BL/200 (blue).
1-1768016-1
BBB-060RT/200 (red).
1-1768016-3
Dot Matrix Inks ordering details
DESCRIPTION
TE PART NUMBER
LQ590-RIBBON
1-2186029-1
TMS-SYSTEM-SIX-RIBBON-A (Obsolete)
310347-000
TMS-SYSTEM-SIX-RIBBON-B (Obsolete)
264327-000
TMS-LQ590-RIBBON
CC3130-000
1892BK04-RIBBON (Obsolete)
D06106-000
1892BK03-HIGH-PERF-RIBBON (Obsolete)
A72722-000
18910000-OKI380-RIBBON (Obsolete)
856832-000
1330-0037-00 (Obsolete)
9-1198202-3
Trademarks
TMS, TE Connectivity (TE) logo and Tyco Electronics are trademarks of the Tyco Electronics
group of companies and its licensors. Other products, logos, and Company names mentioned
herein may be trademarks of their respective owners.
Kapton and Tedlar are trademarks of E I du Pont de Nemours & Company for polymide films.
Related Documents:
404-121000 WinTotal Ribbon List
TTDS-257 Printing Ribbons and Inks