TLCR5800, TLCY5800 www.vishay.com Vishay Semiconductors Ultrabright LED, O 5 mm Untinted Non-Diffused Package FEATURES * Untinted non-diffused lens * Utilizing ultrabright AllnGaP (AS) * High luminous intensity * High operating temperature: Tj (chip junction temperature) up to 125 C for AllnGaP devices * Luminous intensity and color categorized for each packing unit 19223 DESCRIPTION * ESD-withstand voltage: up to 2 kV according to JESD22-A114-B The TLC.58.. series is a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity required. * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP (AS). APPLICATIONS The lens and the viewing angle is optimized to achieve best performance of light output and visibility. * Outdoor LED panels PRODUCT GROUP AND PACKAGE DATA * Central high mounted stop lights (CHMSL) for motor vehicles * Product group: LED * Interior and exterior lighting * Instrumentation and front panel indicators * Replaces incandescent lamps * Package: 5 mm * Traffic signals * Product series: power * Light guide design * Angle of half intensity: 4 PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLCR5800 Red 7500 35 000 - 50 611 616 622 50 - 2.1 2.7 50 AllnGaP on GaAs TLCR5800-AS21 Red 7500 35 000 - 50 611 616 622 50 - 2.1 2.7 50 AllnGaP on GaAs Yellow 5750 25 000 - 50 585 590 597 50 - 2.1 2.7 50 AllnGaP on GaAs TLCY5800 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) TLCR5800, TLCY5800 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb 85 C IF 50 mA tp 10 s IFSM 1 A PV 135 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature t 5 s, 2 mm from body Thermal resistance junction/ambient UNIT Tj 125 C Tamb -40 to +100 C Tstg -40 to +100 C Tsd 260 C RthJA 300 K/W Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 2.1, 03-Mar-15 Document Number: 83178 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5800, TLCY5800 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCR5800, RED TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 50 mA TLCR5800 IV 7500 35 000 - mcd Dominant wavelength IF = 50 mA d 611 616 622 nm Peak wavelength IF = 50 mA p - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 18 - nm Angle of half intensity IF = 50 mA - 4 - deg Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.05 - nm/K Note (1) In one packing unit I Vmin./IVmax. 0.5 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCY5800, YELLOW TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 50 mA TLCY5800 IV 5750 25 000 - mcd Dominant wavelength IF = 50 mA d 585 590 597 nm Peak wavelength IF = 50 mA p - 593 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 17 - nm Angle of half intensity IF = 50 mA - 4 - deg Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmin./IVmax. 0.5 LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. FF 1350 MAX. 2700 GG 1800 3600 HH 2400 4800 II 3200 6400 KK 4300 8600 LL 5750 11 500 MM 7500 15 000 NN 10 000 20 000 PP 13 500 27 000 QQ 18 000 36 000 RR 24 000 48 000 SS 32 000 64 000 TT 43 000 86 000 UU 57 500 115 000 Note * Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP 0 1 2 3 YELLOW RED MIN. MAX. MIN. MAX. 585 587 589 592 588 591 594 597 611 614 618 622 Note * Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. Rev. 2.1, 03-Mar-15 Document Number: 83178 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5800, TLCY5800 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 60 Irel. - Relative Luminous Intensity 1.2 IF - Forward Current (mA) 50 yellow red 40 30 20 10 0 0 20 40 60 80 100 0.2 590 610 630 650 670 - Wavelength (nm) 20 40 1.0 0.9 50 0.8 60 70 0.7 - Angular Displacement 30 IV rel - Relative Radiant Intensity 0.4 Fig. 4 - Relative Intensity vs. Wavelength 80 IV rel - Relative Luminous Intensity 10 0.6 16007 Fig. 1 - Forward Current vs. Ambient Temperature 0 0.8 0.0 570 120 Tamb - Ambient Temperature (C) 16710 red 1.0 10 red 1 0.1 0.01 0.6 0.4 1 0.2 red yellow 60 40 20 1.5 red 1.0 0.5 0.0 - 0.5 - 1.0 d IF - Forward Current (mA) 100 100 IF - Forward Current (mA) Fig. 5 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) Fig. 2 - Relative Luminous Intensity vs. Angular Displacement 80 10 17037 95 10022 0 1.5 15974 - 1.5 1.7 1.9 2.1 2.3 VF - Forward Voltage (V) 2.5 Fig. 3 - Forward Current vs. Forward Voltage Rev. 2.1, 03-Mar-15 17038 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 6 - Changes of Dominant Wavelength vs. Forward Current Document Number: 83178 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5800, TLCY5800 www.vishay.com Vishay Semiconductors 1.2 red IV rel. - Relative Luminous Intensity IV rel - Relative Luminous Intensity 2.5 2.0 1.5 1.0 0.5 - 25 0 25 50 75 560 580 600 620 640 - Wavelength (nm) Fig. 10 - Relative Intensity vs. Wavelength 10 IV rel - Relative Luminous Intensity VF - Change of Forward Voltage (mV) 0.2 540 250 200 red 50 mA 150 100 30 mA 0 10 mA - 50 - 100 - 150 - 200 - 50 yellow 1 0.1 0.01 - 25 0 25 50 75 1 100 Tamb - Ambient Temperature (C) 17018 6 red 4 2 0 -2 100 1.5 yellow 1.0 0.5 0.0 - 0.5 - 1.0 d -4 10 IF - Forward Current (mA) Fig. 11 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) Fig. 8 - Change of Forward Voltage vs. Ambient Temperature d- Change of Dom. Wavelength (nm) 0.4 16008 Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 17034 0.6 100 Tamb - Ambient Temperature (C) 50 0.8 0 0.0 - 50 17035 yellow 1.0 -6 - 50 17036 - 1.5 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 2.1, 03-Mar-15 17019 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 12 - Change of Dominant Wavelength vs. Forward Current Document Number: 83178 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5800, TLCY5800 www.vishay.com d - Change of Dom. Wavelength (nm) Vishay Semiconductors IV rel - Relative Luminous Intensity 2.5 yellow 2.0 1.5 1.0 0.5 0.0 - 50 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) 17016 yellow 4 2 0 -2 -4 -6 - 50 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) 17017 Fig. 13 - Relative Luminous Intensity vs. Ambient Temperature VF - Change of Forward Voltage (mV) 6 Fig. 15 - Change of Dominant Wavelength vs. Ambient Temperature 250 30 mA 200 50 mA yellow 150 100 50 10 mA 0 - 50 - 100 - 150 - 200 - 50 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) 17015 Fig. 14 - Change of Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters A 0.3 8.7 < 0.7 0.15 7.7 Parabolic lens 35.7 0.55 12.7 0.3 (4.9) O 5.5 0.15 C Area not plane O 5 0.15 0.25 0.5 + 0.15 - 0.05 1 min. 1.1 Drawing-No.: 6.544-5310.01-4 Issue: 4; 19.05.09 0.5 + 0.15 - 0.05 technical drawings according to DIN specifications 2.54 nom. 95 11476 Rev. 2.1, 03-Mar-15 Document Number: 83178 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5800, TLCY5800 www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 2 1 9 0.5 12 0.3 18 +1 - 0.5 0.3 0.2 12.7 1 0.9 max. O 4 0.2 2.54 + 0.6 - 0.1 5.08 0.7 6.35 0.7 12.7 0.2 Measure limit over 20 index-holes: 1 Reel (Mat.-no. 1764) Quantity per: 1000 94 8172 Option Dim. "H" 0.5 mm AS 17.3 Explanation 12 - cathode leaves first 21 - anode leaves first REEL TAPE 355 52 max. Diodes: anode before cathode Phototransistors: emitter before collector Code 21 90 Adhesive tape Identification label Reel Diodes: cathode before anode Phototransistors: collector before emitter Code 12 30 Paper Identification label: Vishay/type/group/tape code/production code/quantity Fig. 16 - Reel Dimensions Rev. 2.1, 03-Mar-15 48 45 Tape 94 8671 948641 Fig. 17 - LED in Tape Document Number: 83178 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TLCY5800 TLCR5800