Sensing and Control Axial Fiber Optic Isolator OPI270 Series Features: Opaque plas c housings High noise immunity Visible Red LED with Phototransistor Output 0.05" (1.27 mm) lead spacing Data Transfer through plas c fiber op c cable Isola on voltage 15 KV (OPI1270032), Longer versions higher Descrip on: Each OPI1270 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded plas c housings and coupled by plas c fiber op c cable. The heavyduty opaque housing shields the op cal signal from dust, making this series of devices ideal for dust contaminated environments. The OPI1270 series are designed for applica ons that require high voltage isola on between input and output or signal communica on over short distances. Depending on the length of the fiber op c cable, the emi er does not have to be op cally inline with the sensor. The isola on voltage is greater than 10 K volts per inch (Isola on distance between components) for all versions of the OPI1270. OPB1270032, OPI1270040 and OPI1270080 conforms to UL 1577 (File # E58730). Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more informa on. Ordering Informa on Applica ons: Requiring High Voltage isola on between input and output Electrical isola on in dirty environments Industrial equipment Medical equipment Office equipment Part Number OPI1270018 Isola on Distance 2mm 0.71" [18 mm] Device Length 2mm 1.26" [32.0 mm] 1.57" [40.0 mm] OPI1270026 1.02" [26 mm] OPI1270032 1.26" [32 mm] 1.80" [45.8 mm] OPI1270040 1.57" [40 mm] 2.12" [53.8 mm] OPI1270066 2.60" [66 mm] 3.15" [80.0 mm] OPI1270080 3.15" [80 mm] 3.69" [93.8 mm] LED Peak Lead Length Wavelength 645 nm 0.45" [11.4 mm] Device Length [MILLIMETERS] INCHES DIMENSIONS ARE IN: 1 RoHS 2 3 LED Pin # Transistor 1 Anode 3 Emi er 2 Cathode 4 Collector 4 General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics' own data and is considered accurate at me of going to print. (c) TT electronics plc Pin # 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue C.2 05/2015 Page 1 Sensing and Control Axial Fiber Optic Isolator OPI270 Series Absolute Maximum Ra ngs (TA=25C unless otherwise noted) Storage Temperature Range (note 4) 40o C to +80o C Opera ng Temperature Range (note 4) 20 C to +75 C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260 C(1) Power Dissipa on (2) 100 mW Electrical Characteris cs (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 1.2 2.3 V IF = 20 mA 80 A VR = 3.0 V 50 nA VCE = 10 V, EE = 0 LED (See OVLAS6CB8 for addi onal informa on) VF OnState Collector Current IR CollectorDark Current SENSOR--Phototransistor (See OP506 for addi onal informa on) ICEO Collector Dark Current V(BR)CEO CollectorEmi er Breakdown Voltage 33 V IC = 100 A, EE = 0 V(BR)ECO Emi erCollector Breakdown Voltage 5.5 V IE = 100 A, EE = 0 IC(ON) 0.36 mA VCE = 5 V, IF = 10 mA IISO(3) 1.0 A I @ 7 KV RMS, 25 C, Test Dura on = 2 sec. COUPLED Notes: 1. RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 1.33 mW/ C above 25 C. 3. Isola on voltage tes ng is required. 4. Storage and Opera ng temperature values are based on the plas c op cal interface temperature ra ngs. Please reference UL1577 and UL file AVLVZ.E89328 Output Current vs Forward Current vs Temperature 5.0 Normalized IF = 10mA, Vce = 5V, Ta = 20C 4.5 Normalized Output Current 4.0 3.5 3.0 2.5 -40C -20C 0C 20C 40C 60C 80C 100C 2.0 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 35 40 Forward Current ( mA) General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics' own data and is considered accurate at me of going to print. (c) TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue C.2 05/2015 Page 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TT electronics: OPI1270-018 OPI1270-026 OPI1270-032 OPI1270-040 OPI1270-066 OPI1270-080