T-1 3/4 (5mm) SOLID STATE LAMPS PACKAGE DIMENSIONS HLMP-3X50A MV3X50 C L 0.200 (5.08) 0.180 (4.57) FEATURES 0.350 (8.89) 0.330 (8.38) 0.040 (1.02) 0.480 (12.19) 0.460 (11.68) * Pale tint * Sturdy leads with or without stand-off on T-1 3/4 * Excellent for small area backlighting * HER 0.065 (1.6) 0.055 (1.4) 2X 0.850 (21.59) MIN HLMP-3750A MV3750 * Green 0.050 (1.27) HLMP-3950A MV3450 * Yellow 0.100 (2.54) HLMP-3850A 0.100 (2.54) REF. O 0.230 (5.84) MV3350 0.023 (0.58) 0.017 (0.43) SQ. TYP. (2X) DESCRIPTION HLMP-3X50A The HLMP-3X50 series consists of tinted and water clear T-1 3/4 LED lamps with standoffs. CL 0.200 (5.08) 0.180 (4.57) 0.350 (8.89) 0.330 (8.38) 0.040 (1.02) The MV3X50 series is the same as Agilent's HLMP-3X50A series, except for the standoffs. Both series are available in red, yellow and green with a minimum intensity of 80mcd. 1.00 (25.4) MIN NOTES: ALL DIMENSIONS ARE IN INCHES (mm). 0.050 (1.27) 0.050 (1.27) REF. 0.100 (2.54) 0.100 (2.54) REF. O 0.230 (5.84) 0.023 (0.58) 0.017 (0.43) SQ. TYP. (2X) FLAT DENOTES CATHODE MV3X50 2001 Fairchild Semiconductor Corporation DS300006 2/27/01 1 OF 4 www.fairchildsemi.com T-1 3/4 (5mm) SOLID STATE LAMPS ABSOLUTE MAXIMUM RATING (TA =25C) Parameter HER YELLOW GREEN UNITS Power Dissipation 135 85 135 mW Peak Forward Current 90 60 90 mA Continuous DC Forward Current 30 20 30 mA Lead Soldering Time at 260 C 5 5 5 sec Operating Temperature -55 to +100 -55 to +100 -50 to +100 C Storage Temperature -55 to +100 -55 to +100 -50 to +100 C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) MV3750 MV3350 MV3450 HLMP-3750A HLMP-3850A HLMP-3950A Minimum 80 80 80 Typical 150 150 150 Parameter Luminous Intensity (mcd) IF = 20mA Forward Voltage (V) IF = 20mA Maximum 3.0 3.0 3.0 Typical 2.2 2.2 2.2 Peak Wavelength (nm) Condition 635 585 565 IF = 20mA Reverse Voltage (V) 5 5 5 IR = 100A Viewing Angle () 24 24 24 IF = 20mA www.fairchildsemi.com 2 OF 4 2/27/01 DS300006 T-1 3/4 (5mm) SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES (TA =25C) 2.5 90 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 80 70 HER 60 50 YELLOW 40 30 20 10 2.0 HER YELLOW GREEN 1.5 1.0 0.5 GREEN 0.0 0 1.0 2.0 3.0 4.0 5.0 0 5 15 20 25 30 Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 50 1.0 GREEN YELLOW 40 RELATIVE INTENSITY IF - FORWARD CURRENT (mA) 10 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) HER, GREEN 30 YELLOW 20 10 0.5 HER 0 0 0 20 40 60 85 100 500 550 600 TA - AMBIENT TEMPERATURE (C) 650 700 750 WAVELENGTH (nm) Fig. 3 Current Derating Curve Fig. 4 Relative Intensity vs. Peak Wavelength -20 -10 0 10 20 -30 30 -40 40 -50 50 -60 60 -70 70 -80 -90 100 80 80 60 40 20 0 20 40 60 80 90 100 REL. LUMINOUS INTENSITY (%) Fig. 5 Radiation Diagram DS300006 2/27/01 3 OF 4 www.fairchildsemi.com T-1 3/4 (5mm) SOLID STATE LAMPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 4 OF 4 2/27/01 DS300006