CPC1020N Single-Pole, Normally Open 4-Lead SOP OptoMOS(R) Relay Parameter Blocking Voltage Load Current On-resistance, Max Rating 30 1.2 0.25 Description The CPC1020N is a 30V, single-pole, normally open (1-Form-A) Solid State Relay. The ultra-low on-resistance, 0.25, of this relay allows for high-current operation. Units VP ADC Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing 1500Vrms input to output isolation. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Features * 1500Vrms Input/Output Isolation * Small 4-Lead SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls Ordering Information Part # CPC1020N CPC1020NTR Description 4-Lead SOP (100/tube) 4-Lead SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-CPC1020N-R02 toff e3 www.clare.com 1 CPC1020N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Input Power Dissipation 1 Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation 2 Isolation voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 30 75 50 1 5 400 1500 -40 to +85 -40 to +125 Units VP mW mA A V mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 1.33 mW / C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics Capacitance, Input to Output 1 2 Conditions Symbol Min Typ Max Units IF=2mA t < 10ms IL=1A VL=30VP IL ILPK RON ILEAK - 0.116 - 1.2 3 0.25 1 ADC A A VL=15V, f=1MHz ton toff COUT - 0.48 0.65 70 3 3 - IL=1A IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.13 1.2 - 2 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V ms pF Load current derates linearly from 1.2A @ 25oC to 0.58A @85oC. Measurement taken within 1 second of on-time. ESD Rating ESD Rating (Human Body Model) 1000 Volts 2 www.clare.com R02 CPC1020N PERFORMANCE DATA* Typical Turn-On Time Distribution (N=50, IF=5mA, IL=5mA, TA=25C) 30 25 Typical On-Resistance Distribution (N=50, IF=2mA, IL=1A, TA=25C) 20 15 10 5 Device Count (N) 25 20 Device Count (N) Device Count (N) Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=5mA, TA=25C) 20 15 10 15 10 5 5 0 0 0 0.35 0.40 0.45 0.50 0.55 Turn-On Time (ms) 0.60 0.47 Typical IF for Switch Operation (N=50, IL=100mA, TA=25C) 25 25 0.55 0.63 0.71 Turn-Off Time (ms) 0.113 0.79 Typical Blocking Voltage Distribution (N=50, TA=25C) 0.114 0.115 0.116 0.117 On-Resistance () 0.118 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 35 15 10 5 0 20 Device Count (N) Device Count (N) 15 10 5 0.093 0.101 0.109 0.117 0.125 LED Forward Current (mA) 37.8 1.2 1.1 0.20 IF=5mA 10 1.25 1.5 1.0 0.5 1.29 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 700 2.0 1.26 1.27 1.28 LED Forward Voltage (V) 680 660 640 620 IF=2mA 600 0 -20 0 20 40 60 Temperature (C) 80 100 0 Typical IF for Switch Operation vs. Temperature (IL=1A) 3.5 10 20 30 40 LED Forward Current (mA) 0 50 Typical Turn-On Time vs. Temperature (IL=100mA) 1.2 0.16 0.14 0.12 0.10 2.5 2.0 1.5 IF=2mA 1.0 IF=5mA 0.5 0 20 40 60 Temperature (C) 80 100 50 Typical Turn-Off Time vs. Temperature (IL=100mA) 1.0 0.9 0.8 IF=2mA 0.7 0.6 0.5 0 -20 10 20 30 40 LED Forward Current (mA) 1.1 3.0 0.18 0.08 -40 15 39.4 Turn-Off Time (s) Turn On Time (ms) 1.3 Turn-On Time (ms) LED Forward Voltage (V) 1.4 1.0 -40 LED Forward Current (mA) 2.5 1.5 38.2 38.6 39.0 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=100mA) Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA 20 0 0.133 1.6 25 5 0 Turn-Off Time (ms) Device Count (N) 30 20 IF=5mA 0.4 -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 CPC1020N PERFORMANCE DATA* 0.0 -0.5 0.35 0.30 0.25 0.20 -1.0 0.15 -1.5 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Load Voltage (V) 0.10 38.5 38.0 37.5 37.0 0 20 40 60 Temperature (C) 80 0 20 40 60 Temperature (C) 80 100 1.3 1.0 0.8 0.5 0.3 -40 100 -20 0 20 40 60 80 100 10s 100s Temperature (C) Energy Rating Curve 100 39.0 -20 -20 Typical Leakage Current vs. Temperature Measured Across Pins 3&4 (IF=0mA, VL=30V) 39.5 Typical Load Current vs. Temperature (IF=2mA) 0.0 -40 Typical Blocking Voltage vs. Temperature (IL=1A) 40.0 36.5 -40 1.5 Load Current (ADC) On-Resistance () 0.5 40.5 Blocking Voltage (VP) 0.40 Leakage Current (nA) Load Current (A) 1.0 Typical On-Resistance vs. Temperature (IF=2mA, IL=0.5A) 3.5 3.0 80 Current (A) 1.5 Typical Load Voltage vs. Load Current (IF=2mA, TA=25C) 60 40 2.5 2.0 1.5 1.0 20 0 -40 0.5 -20 0 20 40 60 Temperature (C) 80 100 0.0 10s 100s 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 CPC1020N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1020N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1020N 260C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R02 RoHS 2002/95/EC e3 www.clare.com 5 CPC1020N MECHANICAL DIMENSIONS CPC1020N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: MIN: 0.0254 (0.001) MAX: 0.102 (0.004) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1020N Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1020N-R02 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/27/2010