Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction Features * Small in size (minimum size 1.6 mm 0.8 mm) * 85 C, 85 %RH, W.V. 1.0 for 500 hours * For reflow soldering * RoHS directive compliant Recommended Applications * Time-constant * Filtering * Oscillation and resonance Explanation of Part Numbers 1 2 3 4 E C H U Product code Dielectric & construction 5 6 7 8 9 10 11 X Rated voltage Capacitance Cap. Tol. Suffix G 2 % J 5 % 1C 16 VDC 1H 50 VDC Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage 12 Tape width Reel diameter Tape width 8 mm and diameter 8 mm 5 size o180 mm o330 mm reel is prepared. 12 mm 9 size o330 mm -55 to 125 16 VDC50 VDC (50 VDC: 0.12 F or more: Derating or rated voltage by 1.25 % / at more than 105 ) Capacitance range 0.00010 F to 0.22 F (E12) Capacitance tolerance 2 %(G), 5 %(J) Withstand voltage Between terminals : Rated volt. (VDC)150 % 60 s Dissipation factor (tan ) tan0.6 % (20 , 1 kHz) 16 VDCIR3000 M (20 , 10 VDC, 60 s) 50 VDCIR3000 M (20 , 50 VDC, 60 s) Insulation resistance (IR) Soldering conditions Suffix Reflow soldering : 260 C max. and 95 sec max. at more than 220 C (Temp. at cap. surface) Please consult us for flow soldering In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Construction Dimensions in mm (not to scale) saize code L W H e g K1 1.6 0.8 0.7 0.35 0.4 J1 J2 H1 2.0 2.0 3.2 1.25 1.25 1.6 0.9 1.1 0.9 0.45 0.45 0.65 0.6 0.6 1.0 H2 H3 3.2 3.2 1.6 1.6 1.1 1.5 0.65 0.65 1.0 1.0 G1 G2 G3 3.2 3.2 3.2 2.5 2.5 2.5 1.1 1.5 2.1 0.65 0.65 0.65 1.0 1.0 1.0 E1 E2 4.8 4.8 3.3 3.3 1.5 2.1 0.80 0.80 2.0 2.0 D1 D3 D4 6.0 6.0 6.0 4.1 4.1 4.1 1.9 2.5 2.8 0.80 0.80 0.80 2.0 2.0 2.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors Taping Specification for Automatic Mounting Refer to the page of taping specifications Rating, Dimensions & Quantity/Reel Capacitance tolerance : 2 % (G), 5 % (J) Rated volt. 16 VDC Cap. (F) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No. ECHU1C101X5 ECHU1C121X5 ECHU1C151X5 ECHU1C181X5 ECHU1C221X5 ECHU1C271X5 ECHU1C331X5 ECHU1C391X5 ECHU1C471X5 ECHU1C561X5 ECHU1C681X5 ECHU1C821X5 ECHU1C102X5 ECHU1C122X5 ECHU1C152X5 ECHU1C182X5 ECHU1C222X5 ECHU1C272X5 ECHU1C332X5 ECHU1C392X5 ECHU1C472X5 ECHU1C562X5 ECHU1C682X5 ECHU1C822X5 ECHU1C103X5 ECHU1C123X5 ECHU1C153X5 ECHU1C183X5 ECHU1C223X5 ECHU1C273X5 ECHU1C333X5 ECHU1C393X5 ECHU1C473X5 ECHU1C563X5 ECHU1C683X5 ECHU1C823X5 ECHU1C104X5 Dimensions (mm) L 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 W 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 H 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 1.1 1.1 0.9 0.9 0.9 0.9 1.1 1.1 1.5 1.5 1.5 1.5 2.1 2.1 Rated volt. 50 VDC Size Code K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 J1 J1 J1 J1 J1 J2 J2 H1 H1 H1 H1 H2 H2 H3 H3 G2 G2 G3 G3 Q'ty Part No. ECHU1H101X5 ECHU1H121X5 ECHU1H151X5 ECHU1H181X5 ECHU1H221X5 ECHU1H271X5 ECHU1H331X5 ECHU1H391X5 4000 ECHU1H471X5 ECHU1H561X5 ECHU1H681X5 ECHU1H821X5 ECHU1H102X5 ECHU1H122X5 ECHU1H152X5 ECHU1H182X5 ECHU1H222X5 ECHU1H272X5 ECHU1H332X5 ECHU1H392X5 ECHU1H472X5 ECHU1H562X5 ECHU1H682X5 ECHU1H822X5 3000 ECHU1H103X5 ECHU1H123X5 ECHU1H153X5 ECHU1H183X5 ECHU1H223X5 ECHU1H273X5 ECHU1H333X5 ECHU1H393X5 ECHU1H473X9 2000 ECHU1H563X9 ECHU1H683X9 ECHU1H823X9 ECHU1H104X9 ECHU1H124X9 ECHU1H154X9 ECHU1H184X9 ECHU1H224X9 Dimensions (mm) L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.5 1.5 1.5 2.1 2.1 1.5 1.5 1.5 2.1 2.1 1.9 1.9 2.5 2.8 Size Code J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 H1 H1 H1 H1 H1 H2 H2 G1 G1 G2 G2 G2 G3 G3 E1 E1 E1 E2 E2 D1 D1 D3 D4 Cap. tol. code Recommended for Land Dimensions (mm) Land dimensions Size Code Reflow soldering A K1 J1,J2 H1,H2,H3 G1,G2,G3 E1,E2 D1,D3,D4 0.6 0.8 1.8 1.8 3.0 4.0 B C 2.0 2.4 3.6 3.6 5.6 7.0 0.7 1.1 1.4 2.3 3.0 3.8 It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when "Recommender for Land dimensions" is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Q'ty 3000 2000 3000 2000 ECHU (X) Type (Stacked Metallized Film) DC16V series Electrical Characteristics < Typical Data > Temperature Characteristics Frequency Characteristics at 1kHz 10 10 5 0.010uF 0.10uF 0 -5 Capacitance change(%) Capacitance change(%) 0.10uF 0.010uF 5 0 3300pF -5 -10 -10 1 -60 -40 -20 0 20 40 60 80 100 120 140 10 Temperature(Degree C) at 1kHz 8 6 4 2 0.010uF 0.10uF 10000 2 0.10uF 0.010uF 1 3300pF 0 0 -60 -40 -20 0 20 40 60 80 100120 140 1 Temperature(Degree C) 1.E+12 10 100 1000 10000 10000 100000 Frequency (kHz) at DC 10V 10000 0.010uF 1.E+11 1.E+10 1000 0.10uF 1.E+09 1.E+08 Impedance(ohm) Insuration resistance(ohm) 1000 3 Dissipation factor(%) Dissipation factor(%) 10 100 Frequency (kHz) 0.10uF 1 0.1 1.E+06 0.01 10 Temperature(Degree C) 0.010uF 10 1.E+07 -60 -40 -20 0 20 40 60 80 100120 140 3300pF 100 100 1000 Frequency (kHz) ECHU (X) Type DC16V series (Stacked Metallized Film) Applicable Specifications Permissible Voltage Permissible Current (at sine wave) 100 2.0 0.10 uF 0.082 uF 0.068 uF Effective value (A) Effective value (A) 1.5 0.056 uF 1.0 0.047 uF 0.039 uF 0.033 uF 0.027 uF From 3300 pF to 0.039 uF 10 0.022 uF 0.018 uF 0.5 0.0 10 100 Frequency (kHz) 0.015 uF 0.012 uF 0.010 uF 8200 pF 6800 pF 5600 pF 4700 pF 3900 pF 3300 pF From 0.047 uF to 0.10 uF 1 10 1000 100 1000 Frequency (kHz) Pulse Handling Capability (dv/dt) (Max 10000cycles) DC 16V Capacitance Value(uF) Code dv/dt(V/us) Current(0-P ) (A) 0.0033 332 86 0.28 0.0039 392 80 0.31 0.0047 472 74 0.35 0.0056 562 68 0.38 0.0068 682 62 0.42 0.0082 822 58 0.48 0.010 103 52 0.52 0.012 123 48 0.58 0.015 153 43 0.65 0.018 183 40 0.72 0.022 223 37 0.81 0.027 273 33 0.89 0.033 333 31 1.02 0.039 393 28 1.09 0.047 473 26 1.22 0.056 563 24 1.34 0.068 683 22 1.50 0.082 823 20 1.64 0.10 104 19 1.90 Voltage Derating by Temperature 20 DC Rated Voltage (V) Rating Voltage 15 10 5 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(DegreeC) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. ECHU (X) Type DC50V series (Stacked Metallized Film) Electrical Characteristics <Typical Data > Temperature Characteristics at 1kHz 10 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics 100pF 1000pF 0.01uF 0.1uF 0.22uF 5 0 -5 -10 0.1uF 0.22uF 5 0.039uF 1000pF 0 100pF -5 -10 -60 -40 -20 0 20 40 60 80 100 120 140 10 100 Temperature(Degree C) 10at 1000 10000 Frequency(kHz) 1kHz 3 Dissipation factor(%) Dissipation factor(%) 0.1uF 8 6 100pF 1000pF 0.01uF 0.1uF 0.22uF 4 2 0 -60 -40 -20 0 1000pF 1 100pF 0 20 40 60 80 100 120 140 10 100 at DC50V 100pF 0.01uF 1.E+10 0.1uF 0.22uF 1.E+09 10000 10000 100pF 1000pF 1.E+11 1000 Frequency(kHz) 1.E+08 1.E+07 1.E+06 Impedance(ohm) Insulation resistance(ohm) Temperature(Degree C) 1.E+12 0.039uF 0.22uF 2 1000 1000pF 100 10 1 0.039uF 0.1uF 0.22uF 0.1 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature(Degree C) 100 1000 10000 Frequency(kHz) 100000 ECHU (X) Type DC50V series (Stacked Metallized Film) Applicable Specifications Permissible Current Permissible Current 1.2 0.12 0.10 1.0 2700pF Effective value (Arms) Effective value (Arms) 0.039uF 2200pF 0.08 1800pF 0.06 1500pF 1200pF 0.04 1000pF 820pF 680pF 0.033uF 0.8 0.027uF 0.022uF 0.018uF 0.6 0.015uF 0.012uF 0.4 0.01uF 8200pF 6800pF 5600pF 4700pF 3900pF 3300pF 0.2 0.02 560pF 100pF 0.0 0.00 10 100 10 1000 Permissible Current 1000 Permissible Voltage 2.0 (at sine wave) 100 From 100pF to 2700pF 1.5 0.22uF 0.18uF 0.15uF 0.12uF 0.1uF 0.082uF 0.068uF 0.056uF 0.047uF 1.0 0.5 Effective value Effective value (Arms) 100 Frequency(kHz) Frequency(kHz) 10 0.0 10 100 1 10 Frequency(kHz) 100 1000 Frequency(kHz) *Please consult Panasonic if your condition exceeds the above *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) vlue is calculated using nominal capacitance. ECHU (X) Type DC50V series (Stacked Metallized Film) Applicable Specifications Permissible Voltage Permissible Voltage (at sine wave) 100 (at sine wave) 100 From 0.015uF to 0.039uF 10 1 Effective value Effective value From 3300pF to 0.012uF 0.047uF 0.056uF 0.068uF 0.082uF 0.10uF 0.12uF 0.15uF 0.18uF 0.22uF 10 1 10 100 1000 10 100 Frequency(kHz) Frequency(kHz) Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Capacitance dV/dt code Voltage Value(uF) (V/us) DC 50V Current (Ao-p) Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Capacitance dV/dt code Voltage Value(uF) (V/us) Current (Ao-p) 0.00010 101 1100 0.11 0.0033 332 240 0.79 0.00012 121 1050 0.13 0.0039 392 220 0.86 0.00015 151 940 0.14 0.0047 472 200 0.94 0.00018 181 890 0.16 0.0056 562 190 1.06 0.00022 221 800 0.18 0.0068 682 170 1.16 0.00027 271 730 0.20 0.0082 822 160 1.31 0.00033 331 690 0.23 0.010 103 145 1.45 0.00039 391 610 0.24 0.012 123 135 1.62 0.00047 471 580 0.27 0.015 153 120 1.80 0.00056 561 520 0.29 0.018 183 110 1.98 0.00068 681 480 0.33 0.022 223 100 2.20 0.00082 821 440 0.36 0.027 273 94 2.54 0.0010 102 400 0.40 0.033 333 86 2.84 0.0012 122 370 0.44 0.039 393 78 3.04 0.0015 152 340 0.51 0.0018 182 310 0.56 0.0022 222 270 0.59 0.0027 272 260 0.70 DC 50V *Please consult Panasonic if your condition exceeds the above *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance. ECHU (X) Type DC50V series (Stacked Metallized Film) Applicable Specifications Voltage Derating by Temperature Pulse Handling Capability (dv/dt) DC 50V 60 Current (Ao-p) 0.047 473 72 3.38 0.056 563 68 3.81 0.068 683 62 4.22 0.082 823 56 4.59 0.10 104 52 5.20 0.12 124 48 5.76 0.15 154 44 6.60 0.18 184 40 7.20 0.22 224 36 7.92 From 100pF to 0.1uF 50 DC Rated Voltage (V) (Max 10000cycles) Rating Capacitance dV/dt code Voltage Value(uF) (V/us) 40 From 0.12uF to 0.22uF 30 20 10 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(DegreeC) *Please consult Panasonic if your condition exceeds the above *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance. Panasonic Caution about Safety in Use 3.1. Washing of chip type Since the chip type capacitor does not have a coating, components of flux or detergent left over on the element at the time of washing may be activated and invade into the inside of the capacitor, and adverse effects may be caused. Observe the following cautions. In the case of washing, use flux and cream solder with halogen content of 0.1wt.% or less when mounting. In the case of ultrasonic washing, note that peeling of protective film, electrode separation due to resonance, or characteristic deterioration may occur depending on the detergent used or ultrasonic output. Check carefully beforehand. When using a CFC substitute detergent, with the washing method of spraying detergent (rinsing water) to the substrate at high pressure, the protective film on the element surface may be peeled off due to the water pressure. Check carefully beforehand. 2.4.2 Cautions for use of soldering iron Be careful that the soldering irons do not directly touch the main body of the chip film capacitor. In particular, don't touch the side (cut section). If touched by the heated soldering iron, lowering of insulation resistance, shortcircuit or other characteristic deterioration may occur. Preheat the printed wining board land sufficiently with the soldering iron, and then solder. Solder without directly touching the iron tip to the electrode of the capacitor. Don't reuse the products once removed by the soldering irons. Should not mount the chip film capacitors in the mass production by soldering iron. (The temperature control is difficult, and the characteristics may be deteriorated.) Should not resolder with heat directly from bottom side of P. W. Board. because capacitor will likely be damaged. 3. Washing the mounted boards Usable detergent and washing method (Usable detergent Classification Detergent name Alcohol derivative Maker IPA (isopropyl alcohol) Halogenated hydrocarbon (Reagent for general industrial use) AK-225AES (Washing method) Condition Item Asahi Glass Co. Temperature Tine Immersion washing 50 Within 5 minutes Steam washing 50 Within 5 minutes Ultrasonic washing 50 Within 5 minutes <CFC substiture detergent> As a result of regulation of CFC and chlorine derivative detergents, many substitute detergents come to be used, but the performance of the chip type capacitor may be reduced depending on the type of detergent or washing condition. Check sufficiently beforehand. Consult us in advance if planning to use CFC substitute detergent. 3.2. Washing of leaded type The film capacitor varies significantly in the effect of washing depending on the structure and material, and generally it is less affected by CFC or alcohol derivative washing solvent, and is likely to be affected by highly polar solvent. The lead type film capacitor is coated with an epoxy resin excellent in chemical resistance, and is hardly affected by detergent, but it is recommended to be washed for short duration. <Drying after washing> Dry after washing so that the detergent is not left over. If drying is insufficient, the detergent is left over on the element surface, and the insulation resistance is measured to be lowered. Dry enough so as not to leave detergent. Applicability of detergents in film capacitors is listed for reference. DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. 11 Sep. 2008 Panasonic Caution about Safety in Use List of applicability of detergents Box type Washing condition Chip type Lead type Ethanol Ultrasonic washing or immersion washing for 5 min Isopropyl alcohol (IPA) Ultrasonic washing or immersion washing for 5 min FRW-17 Ultrasonic washing for 5 min, 60 FRW-1N Ultrasonic washing for 5 min, 60 FRW-100 Steam drying for 1 min, 100 Asahi Clean AK-225AES Ultrasonic washing or immersion washing for 5 min HCFC141b-MS Ultrasonic washing or immersion washing for 5 min P3 Cold Cleaner 225S Ultrasonic washing for 5 min 60 IPA ultrasonic rinsing for 5 min at ordinary temperature hot air drying for 5 min, 40 Toluene Ultrasonic washing or immersion washing for 5 min x Terpene Cleaner EC-7 Spray washing for 5 min at ordinary temperature purified water spraying for 5 min, 50 hot air drying for 5 min, 80 x Ultrasonic washing for 5 min 60 wind-free drying for 5 min, 85 x Clean Through 750H Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through 750L Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through 710M Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through LC-841 Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Shower washing for 1 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x ECQUL Alcohol Solvent Silicon Halogen Petroleum hydrocarbon Terpene Water Purified water Surface active agent : Washing enabled Wash-fre e Wash-free flux Low residue flux Inactivated flux x : Washing disabled : Not confirmed ULF-500VS AM-173 Washing disabled (x mark) detergent should be avoided because the appearance may be impaired, the characteristic may be deteriorated, and the reliability cannot be guaranteed DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. -12- Jul. 2011