http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEN 6 Series, 6 Watt
Features
◆ Ultra wide 4:1 Input Range
◆ Full SMD-Design
◆ High Efficiency up to 84%
◆ Extended Operating Temperature Range
-40°C to +85°C
◆ Indefinite Short-circuit Protection
◆ Reverse Voltage Protection
◆ I/O-isolation 1’500 VDC
◆ Input Filter meets EN 55022, Class A and
FCC, Level A without external Components
◆ Shielded Metal Case with insulated
Baseplate
◆ 24-pin DIP with Industry Standard Pinout
◆ 3 Year Product Warranty
The TEN 6 series DC/DC converter is designed for applications requiring very wide
operating voltage range. Typical applications are tele- and data communication
systems, mobile battery powered equipment and industrial process control systems
operation from different input voltages i.e. 12/24 VDC or 24/48 VDC battery vol-
tages. High efficiency allows operating temperatures up to 85°C. Input filtering to
EN 55022, class A and low output ripple minimise design-in time and cost.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 6-2410 3.3 VDC 1200 mA 78 %
TEN 6-2411 5 VDC 1000 mA 81 %
TEN 6-2412 12 VDC 500 mA 84 %
TEN 6-2413 9 – 36 VDC 15 VDC 400 mA 84 %
TEN 6-2421 ± 5 VDC ± 500 mA 81 %
TEN 6-2422 ± 12 VDC ± 250 mA 84 %
TEN 6-2423 ± 15 VDC ± 200 mA 84 %
TEN 6-4810 3.3 VDC 1200 mA 78 %
TEN 6-4811 5 VDC 1000 mA 81 %
TEN 6-4812 12 VDC 500 mA 84 %
TEN 6-4813 18 – 75 VDC 15 VDC 400 mA 84 %
TEN 6-4821 ± 5 VDC ± 500 mA 81 %
TEN 6-4822 ± 12 VDC ± 250 mA 84 %
TEN 6-4823 ± 15 VDC ± 200 mA 84 %
Models
UL 60950
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEN 6 Series 6 Watt
Input Specifications
Input current no load /full load 24 Vin models 22 mA / 600 mA typ. (at 12 VDC Vin)
20 mA / 300 mA typ. (at 24 VDC Vin)
48 Vin models 11 mA / 300 mA typ. (at 24 VDC Vin)
10 mA / 150 mA typ. (at 48 VDC Vin)
Start-up voltage / 24 Vin models 8.5 VDC / 8.0 VDC typ.
under voltage shut down 48 Vin models 17 VDC / 16 VDC typ.
Surge voltage (1 sec. max.) 24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ± 1 %
Regulation – Input variation Vin min. to Vin max. ± 0.3 % max.
– Load variation 10 – 100 %
– single output models ± 1.0 % max.
– dual output models balanced load ± 1.0 % max.
– dual output models unbalanced load ± 3.0 % max.
Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max
Temperature coefficient ± 0.02 % / K
Current limitation > 110% of Iout max., constant current
Short circuit protection indefinite (automatic recovery)
Capacitive load – single output models 3’000 µF max.
– dual output models 680 µF max.
General Specifications
Temperature ranges – Operating – 40 °C ... + 85 °C
– Case temperature + 100 °C max.
– Storage – 55 °C ... + 125 °C
Derating 3.5% /K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C
Isolation voltage Input/Output 1’500 VDC
Isolation capacity Input/Output 380 pF typ
Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm
Switching frequency 300 kHz typ. (Pulse frequency modulation PFM)
Safety standards UL/cUL 60950 , IEC 60950, EN 60950
Compliance up to 60 VDC input voltage
(SELV limit)
Safety approval CSA (File no. 226037)
Page 3 of 3
Specifications can be changed without notice
J
enatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com
DC/DC Converters
TEN 6 Series 6 Watt
Physical Specifications
Case material Steel, Nickel plated
Baseplate material non conductive FR4
Potting material Silicon TSE 3331 (UL 94V-0 rated)
Weight 14 g (0.49 oz)
Soldering temperature max. 260 °C / 10 sec.
Outline Dimensions mm (inches)
0.5
4.5
±0.5
22.86 (0.9)
20 ±0.5 (0.8 ±0.02)
2.54 (0.1)
32 ±0.5 (1.25 ±0.02)
10 ±0.5
15.24 (0.6)
9
11
22
23 2
3
16
14
Bottom view
15.24 (0.6)
5.08
2.4 ±0.5
3.8
Insulated Baseplate
(0.09
±0.02
)
(0.4
±0.02
)
(0.15)
(0.18 ±0.02)
(0.2)
(0.02)
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (0.02)
Pin Single Dual
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No pin Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. 05/05
