DC/DC Converters TEN 6 Series, 6 Watt UL 60950 Features Ultra wide 4:1 Input Range Full SMD-Design High Efficiency up to 84% Extended Operating Temperature Range -40C to +85C Indefinite Short-circuit Protection Reverse Voltage Protection I/O-isolation 1'500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Shielded Metal Case with insulated Baseplate 24-pin DIP with Industry Standard Pinout 3 Year Product Warranty The TEN 6 series DC/DC converter is designed for applications requiring very wide operating voltage range. Typical applications are tele- and data communication systems, mobile battery powered equipment and industrial process control systems operation from different input voltages i.e. 12/24 VDC or 24/48 VDC battery voltages. High efficiency allows operating temperatures up to 85C. Input filtering to EN 55022, class A and low output ripple minimise design-in time and cost. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 6-2410 3.3 VDC 1200 mA 78 % TEN 6-2411 5 VDC 1000 mA 81 % 12 VDC 500 mA 84 % 15 VDC 400 mA 84 % TEN 6-2421 5 VDC 500 mA 81 % TEN 6-2422 12 VDC 250 mA 84 % TEN 6-2423 15 VDC 200 mA 84 % TEN 6-4810 3.3 VDC 1200 mA 78 % TEN 6-4811 5 VDC 1000 mA 81 % TEN 6-4812 12 VDC 500 mA 84 % 15 VDC 400 mA 84 % TEN 6-4821 5 VDC 500 mA 81 % TEN 6-4822 12 VDC 250 mA 84 % TEN 6-4823 15 VDC 200 mA 84 % TEN 6-2412 TEN 6-2413 TEN 6-4813 http://www.tracopower.com 9 - 36 VDC 18 - 75 VDC Page 1 of 3 DC/DC Converters TEN 6 Series 6 Watt Input Specifications Input current no load /full load 24 Vin models 22 mA 20 mA 48 Vin models 11 mA 10 mA / 600 mA typ. (at 12 VDC Vin) / 300 mA typ. (at 24 VDC Vin) / 300 mA typ. (at 24 VDC Vin) / 150 mA typ. (at 48 VDC Vin) Start-up voltage / under voltage shut down 24 Vin models 8.5 VDC / 8.0 VDC typ. 48 Vin models 17 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation 1% - - - - - Input variation Vin min. to Vin max. Load variation 10 - 100 % single output models dual output models balanced load dual output models unbalanced load 0.3 % max. 1.0 % max. 1.0 % max. 3.0 % max. Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max Temperature coefficient 0.02 % / K Current limitation > 110% of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load - single output models - dual output models 3'000 F max. 680 F max. General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C Derating 3.5% /K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 C Isolation voltage Input/Output 1'500 VDC Isolation capacity Input/Output 380 pF typ Isolation resistance Input/Output (500 VDC) > 1`000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL/cUL 60950 , IEC 60950, EN 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approval CSA (File no. 226037) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 6 Series 6 Watt Physical Specifications Case material Steel, Nickel plated Baseplate material non conductive FR4 Potting material Silicon TSE 3331 (UL 94V-0 rated) Weight 14 g (0.49 oz) Soldering temperature max. 260 C / 10 sec. 2.54 (0.1) (0.18 0.02) Insulated Baseplate 14 0.5 (0.02) 3.8 10 0.5 2.4 0.5 2 3 Bottom view 16 (0.2) 5.08 15.24 (0.6) 23 22 22.86 (0.9) 32 0.5 (1.25 0.02) 4.5 0.5 Outline Dimensions mm (inches) 9 11 15.24 (0.6) Pin-Out Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No pin Common 11 No function -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (0.09 0.02) 20 0.5 (0.8 0.02) (0.15) (0.4 0.02) Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Specifications can be changed without notice Rev. 05/05 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com Page 3 of 3