Aluminum Electrolytic Capacitors/ UP
EE174
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
Japan
Malaysia
U.S.A (ii)
Snap-in Type
n Features
n Recommended Applications
n Specifications
n Dimensions in mm (not to scale)
Endurance: 85°C 2000 h
Length 20 mm
RoHS directive compliant
Smoothing circuits, AC adaptor,
10.0±0.1
L+2.0 max
φD+1.0 max
(10.0) 2-φ2.0±0.1
PET Sleeve
Vent
Polarity bar
Recommended PWB piercing plan
(ii) Regarding USA product,
Please check PEDCA s
Catalog.
Country of Origin
+0.2
0.8-0.1
1.5 ± 0.2
2.0 max
4.0± 0.5
(3.5)
Terminal
(t= 0.8)
Bottom of can
Standard terminal type does not require
terminal trimming process.
UP TS
Series: Type :
,
-40 to + 85°C -25 to + 85°C
16 to 250 V .DC 315 to 450 V .DC
120 to 68000 µ F 33 to 820 µ F
±20 % (120Hz/+20°C)
Frequency (Hz)
16 to 100V
160 to 450V
50 60 100 120 500 1k 10k to
0.93 0.95 0.99 1.00 1.05 1.08 1.15
0.75 0.80 0.95 1.00 1.20 1.25 1.40
(µA) max. after 5 minutes application of rated working voltage at +20°C.
C:Capacitance(µF) V: W.V. (V.DC)
3√CV
Category temp. range
Rated W.V. Range
Nominal Cap. Range
DC Leakage Current
Capacitance Tolerance
tan δ
Endurance
Shelf Life
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage ) at +85°C, the capacitor shall meet the following limits.
Please see the attached standard products list
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Frequency Correction
Factor for Ripple Current Correction Factor
4.0 ± 0.5
Aluminum Electrolytic Capacitors/ UP
EE175
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
n
25
16
tan δ
(120Hz)
(+20°C)
(A)
(mm)
(V) (µF) (pcs)(mm)
Min. Packaging Q' t y
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
10000 22 30 3.78 0.50 ECEC1CP103BJ 200
25 25 3.78 0.50 ECEC1CP103CJ 200
12000 22 30 4.52 0.50 ECEC1CP123BJ 200
25 25 4.52 0.50 ECEC1CP123CJ 200
15000 22 35 5.26 0.50 ECEC1CP153BJ 200
25 30 5.26 0.50 ECEC1CP153CJ 200
18000 22 40 5.57 0.50 ECEC1CP183BJ 200
25 30 5.57 0.50 ECEC1CP183CJ 200
22000 22 45 6.10 0.50 ECEC1CP223BJ 200
25 35 6.10 0.50 ECEC1CP223CJ 200
30 30 6.10 0.50 ECEC1CP223DJ 200
27000 25 45 6.31 0.50 ECEC1CP273CJ 200
30 35 6.31 0.50 ECEC1CP273DJ 100
33000 25 50 6.84 0.50 ECEC1CP333CJ 200
30 40 6.84 0.50 ECEC1CP333DJ 100
35 30 6.84 0.50 ECEC1CP333EJ 200
39000 30 45 6.94 0.56 ECEC1CP393DJ 100
35 35 6.94 0.56 ECEC1CP393EJ 100
47000 30 50 7.47 0.64 ECEC1CP473DJ 100
35 40 7.47 0.64 ECEC1CP473EJ 100
56000 35 45 8.73 0.73 ECEC1CP563EJ 100
68000 35 50 9.05 0.85 ECEC1CP683EJ 100
6800 22 30 3.47 0.40 ECEC1EP682BJ 200
25 25 3.47 0.40 ECEC1EP682CJ 200
8200 22 30 3.57 0.40 ECEC1EP822BJ 200
25 25 3.57 0.40 ECEC1EP822CJ 200
10000 22 35 3.78 0.40 ECEC1EP103BJ 200
25 30 3.78 0.40 ECEC1EP103CJ 200
30 25 3.78 0.40 ECEC1EP103DJ 200
12000 22 40 4.10 0.40 ECEC1EP123BJ 200
25 35 4.10 0.40 ECEC1EP123CJ 200
30 30 4.10 0.40 ECEC1EP123DJ 200
15000 22 50 4.63 0.40 ECEC1EP153BJ 200
25 40 4.63 0.40 ECEC1EP153CJ 200
30 30 4.63 0.40 ECEC1EP153DJ 200
18000 25 45 5.47 0.40 ECEC1EP183CJ 200
30 35 5.47 0.40 ECEC1EP183DJ 100
22000 25 50 6.10 0.40 ECEC1EP223CJ 200
30 40 6.10 0.40 ECEC1EP223DJ 100
27000 30 45 6.21 0.40 ECEC1EP273DJ 100
35 35 6.21 0.40 ECEC1EP273EJ 100
33000 30 50 6.84 0.40 ECEC1EP333DJ 100
Part No.
4.0mm
Terminal Length
(Without P.V.C. plate)
PET sleeve
Aluminum Electrolytic Capacitors/ UP
EE176
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
35
n
(A)
(mm)(V) (µF) (pcs)
(mm)
Min. Packaging Q' ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
33000 35 40 6.84 0.40 ECEC1EP333EJ 100
39000 35 45 7.36 0.46 ECEC1EP393EJ 100
47000 35 50 8.00 0.54 ECEC1EP473EJ 100
4700 22 30 3.26 0.35 ECEC1VP472BJ 200
25 25 3.26 0.35 ECEC1VP472CJ 200
5600 22 30 3.36 0.35 ECEC1VP562BJ 200
25 25 3.36 0.35 ECEC1VP562CJ 200
6800 22 35 3.68 0.35 ECEC1VP682BJ 200
25 30 3.68 0.35 ECEC1VP682CJ 200
8200 22 40 4.00 0.35 ECEC1VP822BJ 200
25 35 4.00 0.35 ECEC1VP822CJ 200
10000 22 45 4.42 0.35 ECEC1VP103BJ 200
25 40 4.42 0.35 ECEC1VP103CJ 200
30 30 4.42 0.35 ECEC1VP103DJ 200
35 25 4.42 0.35 ECEC1VP103EJ 200
12000 25 45 5.05 0.35 ECEC1VP123CJ 200
30 35 5.05 0.35 ECEC1VP123DJ 100
35 30 5.05 0.35 ECEC1VP123EJ 200
15000 25 50 5.57 0.35 ECEC1VP153CJ 200
30 40 5.57 0.35 ECEC1VP153DJ 100
35 30 5.57 0.35 ECEC1VP153EJ 200
18000 30 45 5.68 0.35 ECEC1VP183DJ 100
35 35 5.68 0.35 ECEC1VP183EJ 100
22000 30 50 6.10 0.35 ECEC1VP223DJ 100
35 40 6.10 0.35 ECEC1VP223EJ 100
27000 35 45 6.84 0.35 ECEC1VP273EJ 100
33000 35 50 7.15 0.35 ECEC1VP333EJ 100
3300 22 30 2.73 0.30 ECEC1HP332BJ 200
25 25 2.73 0.30 ECEC1HP332CJ 200
3900 22 30 2.75 0.30 ECEC1HP392BJ 200
25 25 2.75 0.30 ECEC1HP392CJ 200
4700 22 35 3.03 0.30 ECEC1HP472BJ 200
25 30 3.03 0.30 ECEC1HP472CJ 200
30 25 3.03 0.30 ECEC1HP472DJ 200
5600 22 40 3.42 0.30 ECEC1HP562BJ 200
25 35 3.42 0.30 ECEC1HP562CJ 200
30 30 3.42 0.30 ECEC1HP562DJ 200
6800 22 50 3.85 0.30 ECEC1HP682BJ 200
25 40 3.85 0.30 ECEC1HP682CJ 200
30 30 3.85 0.30 ECEC1HP682DJ 200
8200 25 45 4.41 0.30 ECEC1HP822CJ 200
30 35 4.41 0.30 ECEC1HP822DJ 100
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C)
25
50
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE177
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
63
n
(A)
(mm)
(V) (µF) (pcs)
(mm)
Min. Packaging Q'ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
10000 25 50 4.97 0.30 ECEC1HP103CJ 200
30 40 4.97 0.30 ECEC1HP103DJ 100
35 30 4.97 0.30 ECEC1HP103EJ 200
12000 30 45 5.58 0.30 ECEC1HP123DJ 100
35 35 5.58 0.30 ECEC1HP123EJ 100
15000 30 50 6.44 0.30 ECEC1HP153DJ 100
35 40 6.44 0.30 ECEC1HP153EJ 100
18000 35 45 6.94 0.30 ECEC1HP183EJ 100
22000 35 50 7.57 0.30 ECEC1HP223EJ 100
2200 22 30 2.52 0.25 ECEC1JP222BJ 200
25 25 2.52 0.25 ECEC1JP222CJ 200
2700 22 35 3.73 0.25 ECEC1JP272BJ 200
25 30 3.73 0.25 ECEC1JP272CJ 200
3300 22 40 4.10 0.25 ECEC1JP332BJ 200
25 30 4.10 0.25 ECEC1JP332CJ 200
30 25 4.10 0.25 ECEC1JP332DJ 200
3900 22 45 4.44 0.25 ECEC1JP392BJ 200
25 35 4.44 0.25 ECEC1JP392CJ 200
30 30 4.44 0.25 ECEC1JP392DJ 200
4700 22 50 4.86 0.25 ECEC1JP472BJ 200
25 40 4.86 0.25 ECEC1JP472CJ 200
30 30 4.86 0.25 ECEC1JP472DJ 200
35 25 4.86 0.25 ECEC1JP472EJ 200
5600 25 45 5.36 0.25 ECEC1JP562CJ 200
30 35 5.36 0.25 ECEC1JP562DJ 100
35 30 5.36 0.25 ECEC1JP562EJ 200
6800 25 50 5.84 0.25 ECEC1JP682CJ 200
30 40 5.84 0.25 ECEC1JP682DJ 100
35 30 5.84 0.25 ECEC1JP682EJ 200
8200 30 45 6.00 0.25 ECEC1JP822DJ 100
35 35 6.00 0.25 ECEC1JP822EJ 100
10000 35 40 6.52 0.25 ECEC1JP103EJ 100
12000 35 50 7.15 0.25 ECEC1JP123EJ 100
1500 22 30 2.26 0.20 ECEC1KP152BJ 200
25 25 2.26 0.20 ECEC1KP152CJ 200
1800 22 35 2.52 0.20 ECEC1KP182BJ 200
25 30 2.52 0.20 ECEC1KP182CJ 200
80 2200 22 40 2.73 0.20 ECEC1KP222BJ 200
25 30 2.73 0.20 ECEC1KP222CJ 200
30 25 2.73 0.20 ECEC1KP222DJ 200
2700 22 45 2.78 0.20 ECEC1KP272BJ 200
25 35 2.78 0.20 ECEC1KP272CJ 200
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C)
50
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE178
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
160
n
(A)
(mm)(V) (µF) (pcs)(mm)
Min. Packaging Q' ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
2700 30 30 2.78 0.20 ECEC1KP272DJ 200
3300 22 50 3.21 0.20 ECEC1KP332BJ 200
25 40 3.21 0.20 ECEC1KP332CJ 200
30 30 3.21 0.20 ECEC1KP332DJ 200
3900 25 45 3.59 0.20 ECEC1KP392CJ 200
30 35 3.59 0.20 ECEC1KP392DJ 100
80 4700 25 50 4.09 0.20 ECEC1KP472CJ 200
30 40 4.09 0.20 ECEC1KP472DJ 100
5600 30 45 4.55 0.20 ECEC1KP562DJ 100
35 35 4.55 0.20 ECEC1KP562EJ 100
6800 30 50 5.16 0.20 ECEC1KP682DJ 100
35 40 5.16 0.20 ECEC1KP682EJ 100
8200 35 50 5.83 0.20 ECEC1KP822EJ 100
1000 22 30 1.96 0.20 ECEC2AP102BJ 200
25 25 1.96 0.20 ECEC2AP102CJ 200
1200 22 35 2.31 0.20 ECEC2AP122BJ 200
25 30 2.31 0.20 ECEC2AP122CJ 200
1500 22 40 2.57 0.20 ECEC2AP152BJ 200
25 30 2.57 0.20 ECEC2AP152CJ 200
30 25 2.57 0.20 ECEC2AP152DJ 200
1800 22 45 2.84 0.20 ECEC2AP182BJ 200
25 35 2.84 0.20 ECEC2AP182CJ 200
30 30 2.84 0.20 ECEC2AP182DJ 200
2200 22 50 3.14 0.20 ECEC2AP222BJ 200
100 25 40 3.14 0.20 ECEC2AP222CJ 200
30 30 3.14 0.20 ECEC2AP222DJ 200
2700 25 45 3.71 0.20 ECEC2AP272CJ 200
30 35 3.71 0.20 ECEC2AP272DJ 100
3300 25 50 4.06 0.20 ECEC2AP332CJ 200
30 40 4.06 0.20 ECEC2AP332DJ 100
3900 30 45 4.54 0.20 ECEC2AP392DJ 100
35 35 4.54 0.20 ECEC2AP392EJ 100
4700 30 50 5.13 0.20 ECEC2AP472DJ 100
35 40 5.13 0.20 ECEC2AP472EJ 100
5600 35 45 5.75 0.20 ECEC2AP562EJ 100
6800 35 50 6.60 0.20 ECEC2AP682EJ 100
330 22 25 1.45 0.15 ECEC2CP331BJ 200
390 22 30 1.62 0.15 ECEC2CP391BJ 200
25 25 1.62 0.15 ECEC2CP391CJ 200
470 22 30 2.11 0.15 ECEC2CP471BJ 200
25 25 2.11 0.15 ECEC2CP471CJ 200
560 22 35 2.25 0.15 ECEC2CP561BJ 200
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C)
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE179
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
180
160
n
(A)
(mm)
(V) (µF) (pcs)
(mm)
Min. Packaging Q' tySpecification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
560 25 30 2.25 0.15 ECEC2CP561CJ 200
30 25 2.25 0.15 ECEC2CP561DJ 200
680 22 40 2.50 0.15 ECEC2CP681BJ 200
25 35 2.50 0.15 ECEC2CP681CJ 200
30 25 2.50 0.15 ECEC2CP681DJ 200
820 22 45 2.75 0.15 ECEC2CP821BJ 200
25 35 2.75 0.15 ECEC2CP821CJ 200
30 30 2.75 0.15 ECEC2CP821DJ 200
1000 25 45 3.00 0.15 ECEC2CP102CJ 200
30 35 3.00 0.15 ECEC2CP102DJ 100
35 30 3.00 0.15 ECEC2CP102EJ 200
1200 25 50 3.25 0.15 ECEC2CP122CJ 200
30 35 3.25 0.15 ECEC2CP122DJ 100
35 30 3.25 0.15 ECEC2CP122EJ 200
1500 30 45 3.73 0.15 ECEC2CP152DJ 100
35 35 3.73 0.15 ECEC2CP152EJ 100
1800 30 50 4.20 0.15 ECEC2CP182DJ 100
35 40 4.20 0.15 ECEC2CP182EJ 100
2200 35 45 4.78 0.15 ECEC2CP222EJ 100
2700 35 50 5.45 0.15 ECEC2CP272EJ 100
330 22 25 1.77 0.15 ECEC2PP331BJ 200
390 22 30 1.91 0.15 ECEC2PP391BJ 200
25 25 1.91 0.15 ECEC2PP391CJ 200
470 22 35 2.08 0.15 ECEC2PP471BJ 200
25 25 2.08 0.15 ECEC2PP471CJ 200
560 22 35 2.25 0.15 ECEC2PP561BJ 200
25 30 2.25 0.15 ECEC2PP561CJ 200
680 22 40 2.50 0.15 ECEC2PP681BJ 200
25 35 2.50 0.15 ECEC2PP681CJ 200
30 30 2.50 0.15 ECEC2PP681DJ 200
820 22 45 2.75 0.15 ECEC2PP821BJ 200
25 40 2.75 0.15 ECEC2PP821CJ 200
30 30 2.75 0.15 ECEC2PP821DJ 200
1000 25 45 3.00 0.15 ECEC2PP102CJ 200
30 35 3.00 0.15 ECEC2PP102DJ 100
1200 25 50 3.31 0.15 ECEC2PP122CJ 200
30 40 3.31 0.15 ECEC2PP122DJ 100
35 35 3.31 0.15 ECEC2PP122EJ 100
1500 30 45 3.83 0.15 ECEC2PP152DJ 100
35 40 3.83 0.15 ECEC2PP152EJ 100
1800 30 50 4.32 0.15 ECEC2PP182DJ 100
35 40 4.32 0.15 ECEC2PP182EJ 100
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C)
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE180
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
n
(A)
(mm)
(V) (µF) (pcs)(mm)
Min. Packaging Q'ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C)
180 2200 35 50 4.92 0.15 ECEC2PP222EJ 100
270 22 25 1.41 0.15 ECEC2DP271BJ 200
330 22 30 1.56 0.15 ECEC2DP331BJ 200
25 25 1.56 0.15 ECEC2DP331CJ 200
390 22 30 1.68 0.15 ECEC2DP391BJ 200
25 25 1.68 0.15 ECEC2DP391CJ 200
470 22 35 1.85 0.15 ECEC2DP471BJ 200
25 30 1.85 0.15 ECEC2DP471CJ 200
30 25 1.85 0.15 ECEC2DP471DJ 200
560 22 40 2.43 0.15 ECEC2DP561BJ 200
25 35 2.43 0.15 ECEC2DP561CJ 200
30 25 2.43 0.15 ECEC2DP561DJ 200
200 680 22 45 2.68 0.15 ECEC2DP681BJ 200
25 35 2.68 0.15 ECEC2DP681CJ 200
30 30 2.68 0.15 ECEC2DP681DJ 200
820 25 45 2.93 0.15 ECEC2DP821CJ 200
30 35 2.93 0.15 ECEC2DP821DJ 100
35 25 2.93 0.15 ECEC2DP821EJ 200
1000 25 50 3.25 0.15 ECEC2DP102CJ 200
30 40 3.25 0.15 ECEC2DP102DJ 100
35 30 3.25 0.15 ECEC2DP102EJ 200
1200 30 45 3.50 0.15 ECEC2DP122DJ 100
35 35 3.50 0.15 ECEC2DP122EJ 100
1500 30 50 3.87 0.15 ECEC2DP152DJ 100
35 40 3.87 0.15 ECEC2DP152EJ 100
1800 35 45 4.32 0.15 ECEC2DP182EJ 100
2200 35 50 4.92 0.15 ECEC2DP222EJ 100
180 22 25 1.07 0.15 ECEC2EP181BJ 200
220 22 30 1.17 0.15 ECEC2EP221BJ 200
25 25 1.17 0.15 ECEC2EP221CJ 200
270 22 30 1.31 0.15 ECEC2EP271BJ 200
25 25 1.31 0.15 ECEC2EP271CJ 200
330 22 35 1.75 0.15 ECEC2EP331BJ 200
25 30 1.75 0.15 ECEC2EP331CJ 200
250 30 25 1.75 0.15 ECEC2EP331DJ 200
390 22 40 1.91 0.15 ECEC2EP391BJ 200
25 35 1.91 0.15 ECEC2EP391CJ 200
30 25 1.91 0.15 ECEC2EP391DJ 200
470 22 45 2.11 0.15 ECEC2EP471BJ 200
25 40 2.11 0.15 ECEC2EP471CJ 200
30 30 2.11 0.15 ECEC2EP471DJ 200
560 25 45 2.25 0.15 ECEC2EP561CJ 200
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE181
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
315
n
(A)
(mm)(V) (µF) (mm)
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
560 30 35 2.25 0.15 ECEC2EP561DJ 100
35 25 2.25 0.15 ECEC2EP561EJ 200
680 25 50 2.50 0.15 ECEC2EP681CJ 200
30 40 2.50 0.15 ECEC2EP681DJ 100
35 30 2.50 0.15 ECEC2EP681EJ 200
250 820 30 45 2.77 0.15 ECEC2EP821DJ 100
35 35 2.77 0.15 ECEC2EP821EJ 100
1000 30 50 3.32 0.15 ECEC2EP102DJ 100
35 40 3.32 0.15 ECEC2EP102EJ 100
1200 35 45 3.53 0.15 ECEC2EP122EJ 100
1500 35 50 4.04 0.15 ECEC2EP152EJ 100
100 22 25 0.92 0.15 ECEC2FP101BJ 200
120 22 30 1.01 0.15 ECEC2FP121BJ 200
25 25 1.01 0.15 ECEC2FP121CJ 200
150 22 30 1.11 0.15 ECEC2FP151BJ 200
25 25 1.11 0.15 ECEC2FP151CJ 200
180 22 35 1.21 0.15 ECEC2FP181BJ 200
25 30 1.21 0.15 ECEC2FP181CJ 200
30 25 1.21 0.15 ECEC2FP181DJ 200
220 22 40 1.41 0.15 ECEC2FP221BJ 200
25 35 1.41 0.15 ECEC2FP221CJ 200
30 25 1.41 0.15 ECEC2FP221DJ 200
270 22 45 1.60 0.15 ECEC2FP271BJ 200
25 40 1.60 0.15 ECEC2FP271CJ 200
30 30 1.60 0.15 ECEC2FP271DJ 200
330 25 45 1.82 0.15 ECEC2FP331CJ 200
30 35 1.82 0.15 ECEC2FP331DJ 100
35 25 1.82 0.15 ECEC2FP331EJ 200
390 25 50 2.01 0.15 ECEC2FP391CJ 200
30 35 2.01 0.15 ECEC2FP391DJ 100
35 30 2.01 0.15 ECEC2FP391EJ 200
470 30 40 2.27 0.15 ECEC2FP471DJ 100
35 35 2.27 0.15 ECEC2FP471EJ 100
560 30 45 2.56 0.15 ECEC2FP561DJ 100
35 35 2.56 0.15 ECEC2FP561EJ 100
680 35 45 2.87 0.15 ECEC2FP681EJ 100
820 35 50 3.25 0.15 ECEC2FP821EJ 100
82 22 25 0.83 0.15 ECEC2VP820BJ 200
100 22 30 0.91 0.15 ECEC2VP101BJ 200
350 120 22 30 1.00 0.15 ECEC2VP121BJ 200
25 25 1.00 0.15 ECEC2VP121CJ 200
150 22 35 1.12 0.15 ECEC2VP151BJ 200
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C) (pcs)
Min. Packaging Q'ty
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE182
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
n
(A)
(mm)(V) (µF) (mm)
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
150 25 30 1.12 0.15 ECEC2VP151CJ 200
30 25 1.12 0.15 ECEC2VP151DJ 200
180 22 40 1.22 0.15 ECEC2VP181BJ 200
25 35 1.22 0.15 ECEC2VP181CJ 200
30 25 1.22 0.15 ECEC2VP181DJ 200
220 22 45 1.44 0.15 ECEC2VP221BJ 200
25 40 1.44 0.15 ECEC2VP221CJ 200
30 30 1.44 0.15 ECEC2VP221DJ 200
35 25 1.44 0.15 ECEC2VP221EJ 200
270 25 45 1.66 0.15 ECEC2VP271CJ 200
350 30 35 1.66 0.15 ECEC2VP271DJ 100
35 30 1.66 0.15 ECEC2VP271EJ 200
330 25 50 1.88 0.15 ECEC2VP331CJ 200
30 40 1.88 0.15 ECEC2VP331DJ 100
35 30 1.88 0.15 ECEC2VP331EJ 200
390 30 45 2.06 0.15 ECEC2VP391DJ 100
35 35 2.06 0.15 ECEC2VP391EJ 100
470 30 50 2.40 0.15 ECEC2VP471DJ 100
35 40 2.40 0.15 ECEC2VP471EJ 100
560 35 45 2.60 0.15 ECEC2VP561EJ 100
680 35 50 2.96 0.15 ECEC2VP681EJ 100
68 22 25 0.76 0.15 ECEC2GP680BJ 200
82 22 25 0.83 0.15 ECEC2GP820BJ 200
100 22 30 0.92 0.15 ECEC2GP101BJ 200
25 25 0.92 0.15 ECEC2GP101CJ 200
120 22 35 1.02 0.15 ECEC2GP121BJ 200
25 30 1.02 0.15 ECEC2GP121CJ 200
150 22 40 1.16 0.15 ECEC2GP151BJ 200
25 30 1.16 0.15 ECEC2GP151CJ 200
30 25 1.16 0.15 ECEC2GP151DJ 200
180 22 45 1.44 0.15 ECEC2GP181BJ 200
400 25 35 1.44 0.15 ECEC2GP181CJ 200
30 30 1.44 0.15 ECEC2GP181DJ 200
220 22 50 1.49 0.15 ECEC2GP221BJ 200
25 40 1.49 0.15 ECEC2GP221CJ 200
30 30 1.49 0.15 ECEC2GP221DJ 200
270 25 45 1.67 0.15 ECEC2GP271CJ 200
30 35 1.67 0.15 ECEC2GP271DJ 100
35 30 1.67 0.15 ECEC2GP271EJ 200
330 30 40 1.90 0.15 ECEC2GP331DJ 100
35 35 1.90 0.15 ECEC2GP331EJ 100
390 30 45 2.13 0.15 ECEC2GP391DJ 100
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C) (pcs)
Min. Packaging Q'ty
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE183
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
(A)
(mm)(V) (µF) (mm)
n
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products
390 35 40 2.13 0.15 ECEC2GP391EJ 100
400 470 35 45 2.39 0.15 ECEC2GP471EJ 100
560 35 50 2.69 0.15 ECEC2GP561EJ 100
82 22 30 0.83 0.15 ECEC2SP820BJ 200
100 22 30 0.92 0.15 ECEC2SP101BJ 200
25 25 0.92 0.15 ECEC2SP101CJ 200
120 22 35 1.02 0.15 ECEC2SP121BJ 200
25 30 1.02 0.15 ECEC2SP121CJ 200
150 22 40 1.16 0.15 ECEC2SP151BJ 200
25 30 1.16 0.15 ECEC2SP151CJ 200
30 25 1.16 0.15 ECEC2SP151DJ 200
180 22 45 1.44 0.15 ECEC2SP181BJ 200
25 35 1.44 0.15 ECEC2SP181CJ 200
420 30 30 1.44 0.15 ECEC2SP181DJ 200
220 25 45 1.49 0.15 ECEC2SP221CJ 200
30 30 1.49 0.15 ECEC2SP221DJ 200
35 25 1.49 0.15 ECEC2SP221EJ 200
270 25 50 1.67 0.15 ECEC2SP271CJ 200
30 35 1.67 0.15 ECEC2SP271DJ 100
35 30 1.67 0.15 ECEC2SP271EJ 200
330 30 45 1.90 0.15 ECEC2SP331DJ 100
35 35 1.90 0.15 ECEC2SP331EJ 100
390 30 50 2.13 0.15 ECEC2SP391DJ 100
35 40 2.13 0.15 ECEC2SP391EJ 100
470 35 45 2.39 0.15 ECEC2SP471EJ 100
560 35 50 2.69 0.15 ECEC2SP561EJ 100
56 22 25 0.70 0.15 ECEC2WP560BJ 200
68 22 30 0.76 0.15 ECEC2WP680BJ 200
82 22 30 0.83 0.15 ECEC2WP820BJ 200
25 25 0.83 0.15 ECEC2WP820CJ 200
100 22 35 0.93 0.15 ECEC2WP101BJ 200
25 30 0.93 0.15 ECEC2WP101CJ 200
30 25 0.93 0.15 ECEC2WP101DJ 200
450 120 22 40 1.04 0.15 ECEC2WP121BJ 200
25 30 1.04 0.15 ECEC2WP121CJ 200
30 25 1.04 0.15 ECEC2WP121DJ 200
150 22 50 1.19 0.15 ECEC2WP151BJ 200
25 40 1.19 0.15 ECEC2WP151CJ 200
30 30 1.19 0.15 ECEC2WP151DJ 200
180 25 45 1.35 0.15 ECEC2WP181CJ 200
30 35 1.35 0.15 ECEC2WP181DJ 100
35 25 1.35 0.15 ECEC2WP181EJ 200
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
tan δ
(120Hz)
(+20°C) (pcs)
Min. Packaging Q'ty
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP
EE184
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
nStandard Products
Endurance : 85°C 2000h
Terminal Pitch : 10mm
When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or
adhesives.(Avoid using adhesives including halogenated compositions.)
(A)
(mm)
(V) (µF) (pcs)
(mm)
Min. Packaging Q' ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
220 25 50 1.55 0.15 ECEC2WP221CJ 200
30 40 1.55 0.15 ECEC2WP221DJ 100
35 30 1.55 0.15 ECEC2WP221EJ 200
270 30 45 1.78 0.15 ECEC2WP271DJ 100
450 35 35 1.78 0.15 ECEC2WP271EJ 100
330 30 50 2.01 0.15 ECEC2WP331DJ 100
35 40 2.01 0.15 ECEC2WP331EJ 100
390 35 45 2.24 0.15 ECEC2WP391EJ 100
470 35 50 2.53 0.15 ECEC2WP471EJ 100
tan δ
(120Hz)
(+20°C)
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP(L:20mm)
EE185
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
400
250
200
160
100
80
63
50
35
25
16
(A)
(mm)(V) (µF) (pcs)(mm)
n
Min. Packaging Q'ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products(L:20mm)
Endurance : 85°C 2000h
Terminal Pitch : 10mm
4700 22 20 1.60 0.50 ECEC1CP472BJ 200
6800 25 20 1.80 0.50 ECEC1CP682CJ 200
10000 30 20 2.40 0.50 ECEC1CP103DJ 200
15000 35 20 3.20 0.50 ECEC1CP153EJ 200
3300 22 20 1.60 0.40 ECEC1EP332BJ 200
4700 25 20 1.80 0.40 ECEC1EP472CJ 200
6800 30 20 2.30 0.40 ECEC1EP682DJ 200
10000 35 20 2.70 0.40 ECEC1EP103EJ 200
2200 22 20 1.40 0.35 ECEC1VP222BJ 200
3300 25 20 1.70 0.35 ECEC1VP332CJ 200
4700 30 20 2.00 0.35 ECEC1VP472DJ 200
6800 35 20 2.40 0.35 ECEC1VP682EJ 200
1500 22 20 1.20 0.30 ECEC1HP152BJ 200
2200 25 20 1.40 0.30 ECEC1HP222CJ 200
3300 30 20 1.70 0.30 ECEC1HP332DJ 200
4700 35 20 2.10 0.30 ECEC1HP472EJ 200
1000 22 20 1.20 0.25 ECEC1JP102BJ 200
1500 25 20 1.30 0.25 ECEC1JP152CJ 200
2200 30 20 1.50 0.25 ECEC1JP222DJ 200
2700 35 20 1.70 0.25 ECEC1JP272EJ 200
680 22 20 1.00 0.20 ECEC1KP681BJ 200
1000 25 20 1.20 0.20 ECEC1KP102CJ 200
1500 30 20 1.40 0.20 ECEC1KP152DJ 200
2200 35 20 1.70 0.20 ECEC1KP222EJ 200
470 22 20 1.00 0.20 ECEC2AP471BJ 200
680 25 20 1.10 0.20 ECEC2AP681CJ 200
1000 30 20 1.20 0.20 ECEC2AP102DJ 200
1500 35 20 1.50 0.20 ECEC2AP152EJ 200
220 22 20 0.75 0.15 ECEC2CP221BJ 200
270 25 20 0.87 0.15 ECEC2CP271CJ 200
390 30 20 1.10 0.15 ECEC2CP391DJ 200
560 35 20 1.30 0.15 ECEC2CP561EJ 200
150 22 20 0.65 0.15 ECEC2DP151BJ 200
220 25 20 0.87 0.15 ECEC2DP221CJ 200
330 30 20 1.10 0.15 ECEC2DP331DJ 200
470 35 20 1.30 0.15 ECEC2DP471EJ 200
120 22 20 0.45 0.15 ECEC2EP121BJ 200
150 25 20 0.65 0.15 ECEC2EP151CJ 200
220 30 20 0.87 0.15 ECEC2EP221DJ 200
330 35 20 1.10 0.15 ECEC2EP331EJ 200
47 22 20 0.25 0.15 ECEC2GP470BJ 200
68 25 20 0.35 0.15 ECEC2GP680CJ 200
tan δ
(120Hz)
(+20°C)
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
Aluminum Electrolytic Capacitors/ UP(L:20mm)
EE186
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
400
450
Endurance : 85°C 2000h
Terminal Pitch : 10mm
(A)
(mm)(V) (µF) (pcs)
(mm)
n
Min. Packaging Q'ty
Specification
Dia. Length
Case size
Cap.
(±20%)
W.V. Ripple
current
(120Hz)
(+85°C)
Standard Products(L:20mm)
100 30 20 0.47 0.15 ECEC2GP101DJ 200
150 35 20 0.60 0.15 ECEC2GP151EJ 200
33 22 20 0.20 0.15 ECEC2WP330BJ 200
47 25 20 0.29 0.15 ECEC2WP470CJ 200
68 30 20 0.38 0.15 ECEC2WP680DJ 200
100 35 20 0.52 0.15 ECEC2WP101EJ 200
tan δ
(120Hz)
(+20°C)
Part No.
PET sleeve
Terminal Length
4.0mm
(Without P.V.C. plate)
