The toughest scopes
ever built.
ScopeMeter® now takes you into CAT IV
environments with four-channel testing.
See more,
fix more,
go where you’ve
never gone with a
scope before.
The 190 Series ScopeMeter® oscilloscopes from
Fluke, with electrically isolated channels, are
safety rated for industrial applications. These
scopes combine rugged portability with the
high performance of bench oscilloscopes to
take you from troubleshooting microelectronics
all the way into power electronic applications.
Choose from two or four channel models
with a wide range of bandwidth options.
Fast sampling rates up to 2.5GS/s, 400 ps
resolution and deep memory of 10,000 samples
per channel allow high-accuracy capture and
display of waveform details, noise, and other
disturbances.
Perform timing or amplitude related
measurements on three phases or three-
axis control systems or simply compare and
contrast multiple test points in a circuit under
test. Features like TrendPlot™, ScopeRecord™,
and Connect-and-View™ help you quickly
diagnose industrial machinery, automation
and process controls, and power electronics to
minimize repair costs and downtime. These
features make the oscilloscopes easy to use
especially when diagnosing the most difficult
problems like complex waveforms, intermittent
events and signal fluctuations or drift.
New Li-ion battery technology keeps your
scope on the job, all day.
Fluke 190 Series ScopeMeter test tools
are available with two or four channels,
60MHz to 200 MHz. Choose the model
that’s right for your environment and
budget.
ScopeMeter® portable
oscilloscopes take you
into territory that standard
bench scopes can’t
go: where it’s harsh,
hazardous and dirty.
2
Built to with-
stand harsh
environments
with the highest
safety ratings
Rated all the way to CAT IV
ScopeMeter test tools are rugged solutions built
for industrial troubleshooting. The new Fluke
190 Series II are double-insulated floating
oscilloscopes safety rated for measurements in
CATIII 1000V/CAT IV 600V environments. The
two-channel Fluke 190C Series is rated CAT II
1000V/CAT III 600 V.
Measure from mV to kV safely
Independent isolated inputs allow you to make
measurements in mixed circuits having different
ground references and reduces the risk of acci-
dental short circuits.
Conventional bench oscilloscopes without
special differential probes and isolation trans-
formers can only reference measurements to
line power earth ground.
With standard probes that cover a wide appli-
cation range from mV to kV, you’re ready for
anything from microelectronics to heavy-duty
medium voltage electrical applications.
The only IP-51 rated scopes on the
market
Rugged and shock-proof, ScopeMeter portable
oscilloscopes are built for harsh environments.
With its sealed case, it can endure dust, drips,
humidity and airborne pollutants. Every time
you reach for the scope you can be confident it
will work reliably.
Overvoltage
category In brief Examples
CAT IV Three-phase at
utility connection,
any outdoor
conductors
• Refers to the “origin of installation,” that
is, where low-voltage connection is made
to utility power
• Electricity meters, primary overcurrent
protection equipment
• Outside and service entrance, service
drop from pole to building, run between
meter and panel
• Overhead line to detached building,
underground line to well pump
CAT III Three-phase
distribution,
including single-
phase commercial
lighting
• Equipment in fixed installations, such as
switchgear and polyphase motors
• Bus and feeder in industrial plants
• Feeders and short branch circuits,
distribution panel devices
• Lighting systems in larger buildings
• Appliance outlets with short connections
to service entrance
CAT II Single-phase
receptacle
connected loads
• Appliance, portable tools, and other
household and similar loads
• Outlet and long branch circuits
– Outlets at more than 10 meters (30 feet)
from CAT III source
– Outlets at more that 20 meters (60 feet)
from CAT IV source
CAT I Electronic • Protected electronic equipment
• Equipment connected to (source) circuits
in which measures are taken to limit
transient overvoltages to an appropriately
low level
• Any high-voltage, low-energy source
derived from a high-winding resistance
transformer, such as the high-voltage
section of a copier
Table 1. Overvoltage installation categories. IEC 61010 applies to low-voltage
(< 1000 V) test equipment.
3
Multiply your
diagnostic
powers with
the new four-
channel Fluke
190 Series II
Introducing the first four-channel scope
with CAT IV rating
The first CAT III 1000 V/CAT IV 600 V rated,
four-channel portable scope on the market,
the new Fluke 190 Series II brings an unprec-
edented combination of performance and
ruggedness into the field.
Take on new challenges in industrial
machinery, automation and process
controls, power conversion electronics
Analyze timing and amplitude relationships of
multiple signals simultaneously, easily compare
and contrast waveform traces spotting irregu-
larities with ease.
• For three-phase power applications like
industrial motors and drives, UPS and invert-
ers for wind energy, and diesel locomotive
controls for transportation
• For three-axis testing when you need to
measure input, output and control signals
simultaneously
The ultimate in portability
New high-performance batteries take advantage
of Li-ion technology to keep you going strong
for a full shift. With the easy-access battery
door you can make battery swaps fast.
New USB connectivity makes it easy to
capture and share waveforms
The new Fluke 190 Series II offers two USB
ports, electrically isolated from measurement
input circuits. Easily transfer data to a PC.
Archive and share waveforms with OEMs,
colleagues and support staff. Store unlimited
waveforms, screen captures and instrument
setups onto USB memory devices.
Go to www.fluke.com/fourchannelscopemeter
Request a copy of the new ATP book on
motors and drives and learn more about
four-channel applications with the new
Fluke 190 Series II.
4
AC to DC
conversion
Mains
supply
Mechanical
output
Motor (load) Cable interface
DC to AC converter
DC lter
and buffer
bus
voltage
L1
T3
L2
T2
L3
Gnd
T1
+Vdc
-Vdc
T3
T2
T1
Input
Safety control
Feedback
Analog/Digital
Output
Condition
Transducers
Measurements’
Process/Display
Power Supply
Analog
Digital
What could you
do with four
channels?
Take multiple measurements
simultaneously and track down the
root cause of your most complex
troubleshooting challenges.
Easily diagnose timing-related issues
with multiple signals
• Real-time inspection of multiple related
signals simultaneously
• Measure a combination of input and output
signals and system safety interlocks and
feedback loops
Find problems in industrial systems
including:
• Circuit voltage/current overloading
• Attenuation/input impedance mismatch
• Signal fluctuation/drift
• Conditioning circuits signal integrity
• Test point verification for critical signals
• Input/output/feedback timing issues
• Induced noise and disturbances
• Random shutdowns/reset
Diagnose VSDs or power inverters and
converters
• Harmonics, transients and loads in three-
phase power input
• Troubleshoot dc to ac converters for faulty
control circuits or output IGBT gate stages
• Cable interface—test PWM output for reflec-
tions and transients
In three-phase systems like variable speed drives, UPS or
back-up generators, use four channels to diagnose power
input, dc to ac converters, or cable interface problems.
For industrial electronics, four channels allows you to
perform three-dimensional testing, measuring input,
output and feedback signals simultaneously.
5
Fluke ScopeMeter
test tools work
harder to make
your job easier
Use the 27,000 points memory of
ScopeRecord and zoom in for maximum
detail.
Cursors and zoom features of the
Fluke 190 Series help you to analyze
the captured TrendPlot.
Connect-and-View™ captures even the
most complex motor drive signals.
See what’s happening with
fast real-time high resolution
sampling. ScopeMeter offers a
sample rate of up to 2.5 GS/s
with up to 400 ps resolution
Connect-and-View™
triggering for an instant,
stable display
If you’ve used
other scopes, you
know how tricky
triggering can be. If settings
are incorrect, results can be
unstable or incorrect. Connect-
and-View™ automatically sets up
correct triggering by recognizing
signal patterns. Without touch-
ing a button, you get a stable,
reliable and repeatable display
of virtually any signal including
motor drive and control signals.
It’s especially fast and conve-
nient when you’re measuring a
number of test points in rapid
succession.
ScopeRecord™ mode for
high resolution waveform
recording up to 48 hours
ScopeRecord™ memory stores up
to 27,000 data points per chan-
nel, capturing fast intermittents
and glitches as short as 8 ns.
(Two sets of multiple-channel
recordings can be stored for later
analysis.)
• Stores events like motion
profiles, UPS, power supply
and motor start-ups
• With the Stop on Trigger
mode, the ScopeMeter auto-
matically recognizes a power
failure and stores the wave-
form data preceding it
• With the waveform zoom (up
to 100x) you can look at the
smallest details, like individual
power cycles
TrendPlot™ paperless
recorder—records up to
16 days to help you find
intermittent faults
The toughest faults to find are
those that happen once in a
while. These intermittents can
be caused by bad connections,
dust, dirt, corrosion, or simply
broken wiring or connectors.
Line outages, sags or starting
and stopping of a motor can
also cause a machine to stop.
You may not be around when
it happens, but the Fluke
ScopeMeter will.
• Plot minimum and maximum
peak values and average over
time up to 16 days
• Plot any combination of volt-
ages, amps, temperature,
frequency and phase for all
four inputs, all with time and
date stamp to pinpoint faults
6
FlukeView® ScopeMeter software for
documenting, archiving and analysis
Get more out of your ScopeMeter with
FlukeView® ScopeMeter® SW90W Software for
Windows.
• Documentation—transfer waveforms, screens
and data to your PC for printing or importing
data into a report
• Add text to ScopeMeter settings—give
operators guidance when recalling settings
• Archives—create a library of waveforms for
easy reference, waveform comparison, or
pass/fail testing
• Analysis—use cursors, perform spectrum
analysis or export data to another analysis
program
• Connect to your PC with optically isolated
USB port
Look back in time with
automatic capture and dis-
play of last 100 screens
It’s frustrating to see a one-time
anomaly flash and miss it. Fluke
ScopeMeter will solve the prob-
lem by letting you look back in
time with a touch of the replay
button.
• In normal use, the instrument
continuously memorizes the
last 100 screens. As each new
screen is acquired, the oldest
is discarded.
• At any moment you can
“freeze” the last 100 screens
and scroll through picture-by-
picture or replay as a “live”
animation
• Use cursors for further analysis
• With advanced triggering you
can capture up to 100 specific
events (Two sets of 100
captured screens with individ-
ual time stamps can be stored
for later recall or downloaded
to a PC.)
Pass/Fail testing of actual signal
against a reference template.
Persistence, FFT,
mathematics and
pass fail waveform
envelope testing
Cursors and automatic
waveform measurements
With 30 automatic measure-
ments, cursors, zoom and a
real-time clock, the ScopeMeter
will perform automatic power
and Vrms measurements on the
specific portion of the waveform
you select within a specified
time span.
Digital Persistence mode gives analog
scope-like display of complex and
modulated signals.
Frequency Spectrum shows an
overview of frequencies contained
in a signal.
Dual-slope triggering used to
capture the eye-pattern on a digital
datastream.
7
A broad family
of ScopeMeter
models
One, two or four input channels—
choose the model that fits your
applications and budget.
Fluke offers the broadest range
of bandwidths in portable
oscilloscopes—from 20MHz to
200MHz.
ScopeMeter 190 Series II: Be prepared for
anything in a CAT IV world with three-axis
and three-phase testing.
• Four independent isolated inputs
• Choose 100 MHz or 200 MHz bandwidth
• Fast sample rate: up to 2.5 GS/s with up to
400 ps resolution
• Single shot, pulse width and video triggering
• Deep memory: 10,000 point per trace wave-
form capture
• CAT III 1000 V/CAT IV 600 V, safety rated
• Up to seven hours of operation with high-
performance Li-ion batteries, standard
• Battery door for conveniently swapping out
batteries to extend usage time
• Isolated USB ports, for memory devices and
PC connectivity
• Security slot to lock down instrument using
standard Kensington® lock
• Plus all the standard features of ScopeMeter
including TrendPlot™, Connect-and-View™
triggering and ScopeRecord™
ScopeMeter 190C Series:
Bench performance in a
rugged two-channel handheld
for automation and process
control applications.
• Dual input
• Choose your bandwidth:
60MHz, 100MHz, 200MHz
• High-resolution color display
• Fast sample rate up to
2.5 GS/s with up to 400 ps resolution
• CAT II 1000V/CAT III 600V safety rated
• Plus all the standard features of ScopeMeter including
TrendPlot™, Connect-and-View™ triggering and ScopeRecord™
ScopeMeter 120 Series:
Three-in one simplicity for
electrical or electromechanical
troubleshooting.
• It’s an oscilloscope, a multimeter
and a paperless recorder in one
affordable, easy-to-use instrument
• Dual input
• Up to seven hours of battery
operation
• CAT III 600 V safety rated
• Automatic measurements
• Choice of 40MHz or 20 MHz
bandwidth
• Two 5,000 count true-rms digital multimeters
• Includes standard ScopeMeter features like Connect-and-View™
and TrendPlot™ recording
• Model 125 offers bus health and power measurements
for industrial network testing
ScopeMeter 215C and 225C:
ScopeMeter for Industrial Bus Health
Testing leverages the full functionality
of the 199C and 196C.
• Get the full functionality of a high-
performance two-channel ScopeMeter plus
powerful test capabilities to diagnose a wide
variety of industrial bus systems
• In bus health test mode, it automatically
analyzes the electrical signals passing through
the bus, and compares the parameters to
industry standard values for that bus type
• Or select an ‘Eye pattern’ display to visually check the overall
signal quality
• Choose 200 MHz or 100 MHz bandwidth models
8
Industrial Industrial Electronics Electronic Field Service
Technologies Electrical Electro-
mechanical
Process
Controls
Automation Medical
Imaging
Avionics A/V and
Security
Systems
Equipment Switch gear,
interlocks,
VFD drives,
pumps, fans,
furnaces,
presses,
mixers,
refrigeration
Actuators,
linear motors,
pressure, level,
flow, positioning
sensors, cutters,
and packaging
equipment
Transducers
and sensors,
loop controllers,
calibrated
gauges
PLC´s, sensors,
transducers,
motion
controllers,
rotary encoders,
scanners,
readers, printers
XRay, MRI,
ultrasound
imaging
equipment
Flight line
navigation
systems,
communication
systems, radars,
on board aircraft
control systems
Retail security
devices,
surveillance
and monitoring
equipment, RFID
120 Series: Electrical and Electromechanical Troubleshooting
123 •
124 •
190C Series: Industrial Electronics, Automation and Process Control Testing
192C •
196C • •
199C • • • •
190 Series II: Four-Channel Industrial Electronics Applications
190-104 • • • •
190-204 • • • •
Industrial Network Bus Health Troubleshooting
125 • •
215C and 225C • •
Which ScopeMeter fits you?
Fluke ScopeMeter Quick Selection Guide
Features
Fluke 190C Series Fluke 190C Series
with Bus Health
Fluke 190 Series II
192C 196C 199C 215C 225C 190-104 190-204
Bandwidth 60 MHz 100 MHz 200 MHz 100 MHz 200 MHz 100 MHz 200 MHz
Number of inputs 2 + 1 2 + 1 2 + 1 2 + 1 2 + 1 4 4
Dual Input TrendPlot™• • • • • • •
Four Input TrendPlot™— — — — — • •
ScopeRecord™ Mode • • • • • • •
Automatic capture
and replay last
100 screens
• • • • • • •
Bus Health test mode — — — ••— —
Safety, power and warranty
EN61010-1 CAT II 1000 V 1000 V 1000 V 1000 V 1000 V — —
EN61010-1 CAT III 600 V 600 V 600 V 600 V 600 V 1000 V 1000 V
EN61010-1 CAT IV — — — — — 600 V 600 V
Battery 4 hrs, NiMH 4 hrs, NiMH 4 hrs, NiMH 4 hrs, NiMH 4 hrs, NiMH 7 hrs, Li-ion 7 hrs, Li-ion
Connectivity
USB PC interface optional optional optional optional optional standard standard
USB memory port — — — — — standard standard
RS-232 interface to PC optional optional optional optional optional — —
Comprehensive selection guides will be available on the web and in the datasheet
9
Mainframes
ScopeMeter 190 Series II
Fluke 190-104, ScopeMeter Series II 100 MHz 4 Channel
Fluke 190-104/S, ScopeMeter Series II 100 MHz 4 Channel with SCC Kit
Fluke 190-204, ScopeMeter Series II 200 MHz 4 Channel
Fluke 190-204/S, ScopeMeter Series II 200 MHz 4 Channel with SCC Kit
ScopeMeter 190C Series
Fluke 192C, ScopeMeter 60 MHz
Fluke 192C/S, ScopeMeter 60 MHz with SCC Kit
Fluke 196C, ScopeMeter 100 MHz
Fluke 196C/S, ScopeMeter 100 MHz with SCC Kit
Fluke 199C, ScopeMeter 200 MHz
Fluke 199C/S, ScopeMeter 200 MHz with SCC Kit
Fluke 225C, ScopeMeter (200 MHz/2.5 GS/s) with Bus Health Test Functions
Fluke 225C/S, ScopeMeter (200 MHz/2.5 GS/s)
with Bus Health Test + SCC190 kit
Fluke 215C, ScopeMeter (100 MHz/1 GS/s) with Bus Health Test Functions
Fluke 215C/S, ScopeMeter (100 MHz/1 GS/s) with Bus Health Test + SCC190 Kit
Optional accessories
Accessories for ScopeMeter 190 Series II
SW90W, FlukeView® ScopeMeter® Software for Windows
C290, Hard Shell Carrying Case
SCC290, FlukeView Software and Carrying Case kit
BC190, Battery Charger/Power Adapter for Fluke 190 Series ScopeMeter
BP291, Double Capacity Li-ion Battery Pack for Fluke 190 Series II
HH290, Hanging Hook
EBC290, External Battery Charger
VPS420-R High Working Voltage Probe, 100:1, Red and Black
AS400, Probe Accessory Extension Set
Accessories for ScopeMeter 190C Series
SW90W, FlukeView ScopeMeter Software for Windows
C190, Hard Shell Carrying Case
SCC190, FlukeView Software, cable and carry case kit
BC190, Battery Charger/Power Adapter for Fluke 190 Series ScopeMeter
BP190, Rechargeable NiMH Battery Pack for Fluke 190C Series
OC4USB, Optically isolated interface cable for USB
VPS420-R High Working Voltage Probe, 100:1, Red and Black
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2010 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 10/2010 3801594A B-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.®
Ordering
information
Fluke 190 Series II instruments include a set of four
probes, hanging strap, USB cable with mini-B con-
nector, double capacity Li-ion battery BP291, battery
charger/power adapter BC190, a FlukeView demo pack-
age and users manuals on CD-ROM. The /S-versions
also include the C290 hard-shell carrying case and the
FlukeView software package.
