DATENBLATT / Specification K-Nr.: K-no.: ME Sach Nr.: T60405-R6122-X100 Item no.: VA CUU M SC HM ELZE 25505 Stromkompensierte Drossel / Common Mode Choke Datum: Kunde: Kd. Sach Nr.: Seite Customer Customers part no.: Page Mabild (mm): Freimatoleranz DIN ISO 2768-c Mechanical outline General tolerances Toleranz der Stiftabstande 0,3mm (Tolerances grid distance) A=km 1=St 2=kg 3=g 4=l 5=m 6=m 7=m 8=mm 9:Paar F Keine Wicklungen in diesem Bereich (no windings in this area) DC Anfang N1 (beginning of N1) Ende N1 (end of N1) N1 2 210,3 Trennsteg (separator) Sektorabstand (separation) 3mm 3 4 1,0 22 O350,5 Keine Wicklungen in diesem Bereich (no windings in this area) N2 Anfang N2 (beginning of N2) 3,5 +0,2 -0,5 Betriebsdaten/Charakteristische Daten (Typische Werte): Schematic diagram Operational data/characteristic data (typical values): N1 = 1,4 mm Beschriftung: marking 6122X100 F DC f=100kHz 2.2 2250 50 DC 24 Ls / Lleak 7.9 H and f = 100 kHz ( Eine Wicklung kurzgeschlossen / one winding shorted) Bemessungsisolationsspannung / rated insulation voltage: Uis = 300 VRMS (424 Vpeak) (Netzstromkreis / connected to the mains) 600 VRMS (848 Vpeak) (Nicht-Netzstromkreis / not connected to the mains) IN = 16 A (bei Umgebungstemp. / at ambient temp. 50C) m 36.8 g Max. Betriebstemperatur / max.operating temperature Top = +130C Umgebungstemperatur / ambient temperature: siehe Seite 3 / see page 3 Lagertemperatur / storage temperature: Tst = -40C...+85C 3 N2 = f=10kHz 8.64 670 28 L [mH] |Z| [] Iunbal. [mA] 2 Cu verzinnt Ende N2 (end of N2) Anschluschema: u 3 of Cu tinned 1 4 von Connections: DC = Date Code F = Factory 100,3 1 1 Anschlusse: Beschriftung: (marking) Anschlusse frei von Kleber (pins free of glue) 31,00,3 19.05.2010 Date: 1 : 1 Prufung / Inspection: (V: 100%-Test; AQL...: DIN ISO 2859-Teil1) 1) (V) 2) (AQL 0,25) M3014: M3011/1: 3) (V) M3011/6: 1s, N1 gegen/vs N2 Up,eff = 1.7 kV, L1 = 8.64 mH* -30% / +50% f = 10 kHz, UAC,eff = 0.5 V = 2.2 mH* -30% / +50% f = 100 kHz, UAC,eff = 1.2 V Polaritat / Ubersetzungsverhaltnis: Toleranz 5% (0Wdg.) Polarity / Turns ratio: Tolerance 4) (AQL 1/S4) M3011/5: RCu1 = RCu2 7.5 m* 5) (Fix 05) M3290: Lotbarkeitstest nach Abschnitt 1 / solderability test acc. to chapter 1 6) (AQL 1/S4) M3200: Mechanische Prufung / mechanical test Typprufung / Type test : 1) M3064: Stospannungsprufung / surge voltage test: N1 gegen/to N2 Einstellwerte / Settings: 1.2 s / 50 s Kurvenform (waveform), UP,peak = 4.0 kV 6 Impulse im Abstand t = 1s mit wechselnder Polaritat (3x2 Impulse) 6 pulses in a cycle of with changing polarity (3x2 pulses) 2) M3014: UP,eff = 1.7 kV, t = 5 s, N1 gegen/vs N2 Messungen nach Temperaturangleich der Pruflinge an Raumtemperatur *vorlaufig/preliminary Measurements after temperature balance of the test samples at room temperature Weitere Vorschriften: Siehe Seite 2 Applicable documents: See page 2 Datum 19.05.10 19.04.10 Hrsg.: editor Name Bi Bi KB-E Index 81 81 Anderung Clear classification of N1 and N2 within the mechanical outline implemented. AA-846 Pin length 3.5 0.5mm a 3.5 -0.5/+0.2mm. AA-824 Bearb: Beichler KB-PM: RKl. designer check Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte fur den Fall der Patenterteilung oder GM-Eintragung vorbehalten freig.: HS released Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden. Any offenders are liable to pay all relevant damages. DATENBLATT / Specification Sach Nr.: K-Nr.: 25505 K-no.: 19.05.2010 Date: Kd. Sach Nr.: Seite Customer Customers part no.: Page 2 von 3 of Weitere Vorschriften / Applicable documents : Konstruiert, gefertigt und gepruft nach EN 50178 und erfullt die Vorschriften. Constructed, manufactured and tested in accordance with EN 50178 and agrees with the standards. Parameter / Parameters:: Basisisolation / Basic insulation: a) Netzstromkreis / connected to the mains N1 - N2 Verschmutzungsgrad 2 / pollution degree Uberspannungskategorie / overvoltage category: Bemessungsisolationsspannung / rated insulation voltage: Prufspannung / test voltage: UP,eff / UP,RMS 1.2 kV Stospanng. / surge volt.age: UP,max / UP,peak 4.0 kV Kriechstrecke / creepage: N1 - N2 3.0 (1.5) mm 2 III Uis,eff / Uis,RMS = 300 V (424 Vpeak) Kurvenform (waveform): 1.2 s / 50 s Isolierstoffklasse I (auf Bodenplatte) Insulation material group I 3.0 (1.5) mm Isolierstoffklasse I (on baseplate) (auf Kerntrog) Insulation material group I (on core casing) N1 - N2 3.0 mm Luftstrecke / clearance: b) Nicht-Netzstromkreis / not connected to the mains Uberspannungskategorie / overvoltage category: Bemessungsisolationsspannung / rated insulation voltage: Prufspannung / test voltage: UP,eff / UP,RMS 1.65 kV Stospanng. / surge volt.age: UP,max / UP,peak 4.0 kV Kriechstrecke / creepage: N1 - N2 3.0 mm II Uis,eff / Uis,RMS = 600 V (828 Vpeak) Kurvenform (waveform): 1.2 s / 50 s Isolierstoffklasse I (auf Bodenplatte) Insulation material group I 3.0 mm (on baseplate) Isolierstoffklasse I (auf Kerntrog) Insulation material group I (on core casing) N1 - N2 3.0 mm Luftstrecke / clearance: File No.: E209169 (BASF 130-1), 130C Design: Isoliersystem gema UL 1446 / insulation system compliant to UL 1446: Bauelement-Trager, Draht und Isoliermaterialien / component fixture, wire and insulation materiels: UL-gelistet / UL-listed Typische Kurven / Characteristics data 40 10000 5-R6122-X100 CMC 16A (1 phase) 5-R6122-X100 CMC 16A (1 phase) insertion loss aE [dB] (50 Ohm-System) A=km 1=St 2=kg 3=g 4=l 5=m 6=m 7=m 8=mm 9:Paar Datum: Stromkompensierte Drossel / Common Mode Choke Kunde: impedance |Z| [ ] ME T60405-R6122-X100 Item no.: VA CUU M SC HM ELZE 1000 100 30 20 10 10 0.0001 0.001 0.01 0.1 1 10 0 0.0001 100 frequency [MHz] Hrsg.: editor KB-E Bearb: Beichler 0.001 0.01 0.1 1 10 frequency [MHz] KB-PM: RKl. designer check Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte fur den Fall der Patenterteilung oder GM-Eintragung vorbehalten freig.: HS released Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden. Any offenders are liable to pay all relevant damages. 100 DATENBLATT / Specification Sach Nr.: K-Nr.: K-no.: T60405-R6122-X100 Item no.: VA CUU M SC HM ELZE 25505 Stromkompensierte Drossel / Common Mode Choke Datum: 19.05.2010 Date: Kunde: Kd. Sach Nr.: Seite Customer Customers part no.: Page 3 von 3 of ME A=km 1=St 2=kg 3=g 4=l 5=m 6=m 7=m 8=mm 9:Paar Temperaturprofil Max. Betriebstemperatur / max. operational temperature: T op, max = 130C Umgebungstemperatur / Max. zulassiger Nennstrom / Ambient temperature max. permissible nom. current Ta [C] IN (Top, max) [A] 95 10,0 80 12,0 70 13,0 60 14,5 50 16,0 UL Information TYPE: Common Mode Choke WINDINGS: Enamelled copper wire (Magnet Wire ANSI MW35), 1,4 mm CORE: Toroidal strip-wound core 25 x 16 x 10 mm CORE INSULATION: Trough, cover and separator PA 66, Ultramid A3X2G5 natural, BASF, UL file QMFZ2 E41871 CORE CARRIER: PA 66, Ultramid A3X2G5 natural, BASF, UL file QMFZ2 E41871 CONNECTION: Tin coated wire ends O 1,4 mm THERMAL CLASS (IEC 85): Enamelled copper wire (200), core carrier and core insulation (B) FLAME CLASS UL94 specified by UL Recognized Component Directory: Core insulation and core carrier (V-0/0,81 mm), Core carrier Hrsg.: editor KB-E Bearb: Beichler KB-PM: RKl. designer check Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte fur den Fall der Patenterteilung oder GM-Eintragung vorbehalten freig.: HS released Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden. Any offenders are liable to pay all relevant damages.