10214-R20CS - 3M - Datasheet.Live

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering inform at io n call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Compliant Pin Vertical Receptacle - Shielded 102 Series

Physical

Electrical

Environmental

Insulation Material: Glass Reinforced Polyester (PBT)

Flammability: UL 94V-0

Color: Black

Contact Material: Copper Alloy

Plating

Underplating: 80 μ″ [ 2.0 μm ] Nickel

Wiping Area: 30 μ″ [ 0.76 μm ] Min. Gold

Compliant Tails: See Ordering Information

Body

Material: Zinc Alloy

Plating: Nickel

Shroud & Latch Hook

Material: Steel

Plating: Nickel

Marking: 3M Logo and Part Number

Current Rating: 1 A

Insulation Resistance: > 5 × 108Ω at 500 VDC

Withstanding Voltage: 500 VRMS for 1 Minute

Temperature Rating: -20°C to +85°C

TS-0961-B

Sheet 1 of 3

Date Modified: July 23, 2007

• Wiper-on-wiper contact for reliable repetitive

plugging

• Rugged die cast metal case construction

• Contacts: 14, 20, 26, 36, 40, 50, 68 and 80

• See Regulatory Information Appendix (RIA) for

chemical compliance information.

UL File No.: E68080

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Note:

2. Assembly tools: 3M™ Stopper Block 10991-XX and 3M™ Press Block 10992-XX.

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Compliant Pin Vertical Receptacle - Shielded 102 Series

Contact

Quantity Dimension

ABCDE

14 .300 [ 7.62 ] .93 [ 23.6 ] 1.16 [ 29.5 ] .50 [ 12.6 ] .77 [ 19.5 ]

20 .450 [ 11.43 ] 1.08 [ 27.45 ] 1.31 [ 33.4 ] .65 [ 16.4 ] .92 [ 23.4 ]

26 .600 [ 15.24 ] 1.23 [ 31.3 ] 1.46 [ 37.2 ] .80 [ 20.2 ] 1.07 [ 27.2 ]

36 .850 [ 21.59 ] 1.48 [ 37.6 ] 1.71 [ 43.5 ] 1.05 [ 26.6 ] 1.32 [ 33.5 ]

40 .950 [ 24.13 ] 1.58 [ 40.2 ] 1.81 [ 46.1 ] 1.15 [ 29.1 ] 1.42 [ 36.1 ]

50 1.200 [ 30.48 ] 1.83 [ 46.5 ] 2.06 [ 52.4 ] 1.40 [ 35.5 ] 1.67 [ 42.4 ]

68 1.650 [ 41.91 ] 2.28 [ 57.9 ] 2.51 [ 63.8 ] 1.85 [ 46.9 ] 2.12 [ 53.8 ]

80 1.950 [ 49.53 ] 2.58 [ 65.6 ] 2.81 [ 71.5 ] 2.15 [ 54.5 ] 2.42 [ 61.5 ]

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dime n s io n s fo r Re fe re n c e

Onl

Tolerance Unless Noted

[mm]

Inch

TS-0961-B

Sheet 2 of 3

Ordering Information 102XX-R2XXS

Contact Quantity

(See Table)

Lockstand Thread

0 = M2.6 (Special order)

1 = M2.5 (Standard)

PCB Press Fit Hole Compatability

C = Cu/pre-flux PCB Holes. Contacts with gold flash tail plating.

(App. E1 & C1 apply)

T = Solder Plated PCB Holes. Cont acts with gold flash t ail plating.

( App. E1 & C1 apply)

Note:

1. Use mounting screws to PCB when using Junction Shells.

15°

.075

[ 1.91 ]

.075

[ 1.91 ]

.075

[ 1.91 ]

.016

[ 0.40 ]

.160

[ 4.00 ]

.19

[ 4.8 ]

.28

[ 7.2 ]

.05

[ 1.3 ]

Position 1

Position 2

.05

[ 1.3 ]

.050 [ 1.27 ]

.23

[ 5.8 ]

.21

[ 5.2 ]

(2X) Lockstand Thread

see ordering information

below

.18

[ 4.6 ] Last Position

.050

[ 1.27 ]

.25

[ 6.3 ]

.36

[ 9.1 ]

Position

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Compliant Pin Vertical Receptacle - Shielded 102 Series

Contact

Quantity Dimension

20 .450 [ 11.43 ] .931 [ 23.64 ]

36 .850 [ 21.59 ] 1.481 [ 37.61 ]

40 .950 [ 24.13 ] 1.581 [ 40.15 ]

68 1.650 [ 41.91 ] 2.281 [ 57.93 ]

80 1.950 [ 49.53 ] 2.581 [ 65.55 ]

Contact

Quantity Dimension

14 .78 [ 20.0 ] .93 [ 23.64 ]

20 .94 [ 23.9 ] 1.08 [ 27.45 ]

26 1.09 [ 27.6 ] 1.23 [ 31.26 ]

36 1.33 [ 33.9 ] 1.48 [ 37.61 ]

40 1.44 [ 36.5 ] 1.58 [ 40.15 ]

50 1.69 [ 42.8 ] 1.83 [ 46.50 ]

68 2.13 [ 54.2 ] 2.28 [ 57.93 ]

80 2.44 [ 61.9 ] 2.58 [ 65.55 ]

Contact

Quantity AB

14 .300 [ 7.62 ] .931 [ 23.64 ]

26 .600 [ 15.24 ] 1.231 [ 31.26 ]

50 1.200 [ 30.48 ] 1.831 [ 46.50 ]

Recommended Board Layout Viewed from Connector Side

Hole size: See note

Position 3

Position 1

Position 2

2x0.112

[ 2.86 ]

[ 5.0 ]

2x0.20

[ 5.0 ]

Last Position

.050 Typ

[ 1.27 ]

2x0.20

[ 5.0 ] 2x0.16

[ 4.0 ]

.075 Typ

[ 1.90 ]

20, 36, 40, 68 and 80 position

2X ∅ .118 ± .003

[ 3.0 ]

(See Note*)

Position

B ± .004

C ± .004

D ± .004

Note: Panel thickness .079 [ 2.00 ] Max.

R .060

[ 1.52 ]

.340 ± .004

[ 8.64 ]

Recommended Panel Cut-Out

.20

[ 5.00 ]

B ± .004

Hole size: See Notes

.050 Typ

[ 1.27 ]

2x0.20

[ 5.0 ] 2x0.16

[ 4.0 ]

Last Position

2X ∅ .118 ± .003

[ 3.0 ]

(See Note*)

Position 3

Position 1

Position 2

2x0.112

[ 2.86 ]

.075 Typ

[ 1.90 ]

2x0.20

[ 5.0 ] Position

14, 26, 50 pos only

TS-0961-B

Sheet 3 of 3

Notes:

1. Listed below are the PCB hole sizes and

tolerances recommended for use with the 3M

MDR Compliant Pin Vertical Receptacle. The

insertion force is designed not to exceed 147N

(33lbs) per pin

Recommended Hole Size in Millimeters:

For Copper plus Pre-Flux Coated PBC Holes

Option 1

a. Drilled Dia. 0.85 +0/-0.020mm

b. Finished Dia.0.68 to 0.79 mm

c. Cu Plating0.025mm minimum

Option 2

a. Drilled Dia0.80 +0.025/-0.020mm

b. Finished Dia0.68 to 0.78mm

c. Cu Plating0.025mm minimum

For Copper and Solder Plated PCB Holes

Option 1

a. Drilled Dia. 0.85 +0.03/-0.03mm

b. Finished Dia.0.65 to 0.81 mm

c. Tin Lead Plating0.015mm maximum

Option 2

a. Drilled Dia0.80 +0.02/-0.02mm

b. Finished Dia0.68 to 0.81mm

c. Cu Plating0.015mm minimum

2. Board thickness: .095 ± .010 to .125 ± .010

3. Assembly Tooling:

(See Ordering Information)

*Note: Plated-through mounting holes

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/17/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

Please recycle. Printed in USA.

RIA-2217-B

3M Electronics

Interconnect Products

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373