https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fuse modular terminal block, fuse type: Glass / ceramics / ..., connection method: Screw connection, cross section:0.14 mm- 6 mm, AWG: 26 - 10, nominal current: 6.3 A, nom. voltage: 60 V, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: NS 35/7,5, NS 35/15, color: black Your advantages An extremely compact design Test connection on both sides in safety lever Tested for railway applications Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918960964 Weight per Piece (excluding packing) 18.030 g Custom tariff number 85369095 Country of origin Germany Technical data General Note The current is determined by the fuse used, the voltage by the selected LED. If the fuse is faulty, the downstream circuit will not be disconnected. Number of levels 1 Number of connections 2 Nominal cross section 4 mm Color black 03/22/2021Page1/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Technical data General Insulating material PA Flammability rating according to UL 94 V0 Area of application Railway industry Machine building Plant engineering Maximum power dissipation for nominal condition 1.6 W Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload) max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload) max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit) max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit) LED voltage range 30 V AC/DC ... 60 V AC/DC LED current range 0.4 mA ... 0.86 mA Connection in acc. with standard IEC60947-7-3 Maximum load current 6.3 A (the current is determined by the fuse used) Nominal current IN 6.3 A Nominal voltage UN 60 V Fuse G / 5 x 20 Fuse type Glass / ceramics / ... Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 C Static insulating material application in cold -60 C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 03/22/2021Page2/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Technical data Dimensions Width 6.2 mm Length 57.8 mm Height NS 35/7,5 73 mm Height NS 35/15 80.5 mm Connection data Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 6 mm Conductor cross section flexible min. 0.14 mm Conductor cross section flexible max. 6 mm Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm 2 conductors with same cross section, solid min. 0.14 mm 2 conductors with same cross section, solid max. 1.5 mm 2 conductors with same cross section, stranded min. 0.14 mm 2 conductors with same cross section, stranded max. 1.5 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.14 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Ambient conditions Operating temperature -60 C ... 105 C (max. short-term operating temperature130C) Ambient temperature (storage/transport) -25 C ... 60 C (for a short time, not exceeding 24h, -60C to +70C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C 03/22/2021Page3/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Technical data Ambient conditions Ambient temperature (actuation) -5 C ... 70 C Standards and Regulations Connection in acc. with standard CSA IEC60947-7-3 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141116 eCl@ss 11.0 27141116 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141116 eCl@ss 9.0 27141116 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 6.0 EC000899 ETIM 7.0 EC000899 UNSPSC UNSPSC 6.01 30211811 03/22/2021Page4/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Classifications UNSPSC UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / KEMA-KEUR / EAC / RS / EAC / CSA / UL Recognized / cUL Recognized / DNV GL / IECEE CB Scheme / LR / cULus Recognized Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ 13631 KEMA-KEUR http://www.dekra-certification.com 71-112695 Nominal voltage UN 500 V Nominal current IN 6.3 A mm/AWG/kcmil 0.14-6 EAC RU CDE.A*30.B.01742 03/22/2021Page5/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Approvals RS http://www.rs-head.spb.ru/en/index.php 17.00013.272 EAC RU CDE.BL08.B.00534 CSA http://www.csagroup.org/services-industries/product-listing/ 13631 B C Nominal voltage UN 60 V 60 V Nominal current IN 6.3 A 6.3 A mm/AWG/kcmil 26-10 26-10 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C Nominal voltage UN 600 V 600 V Nominal current IN 10 A 10 A mm/AWG/kcmil 26-10 26-10 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C Nominal voltage UN 600 V 600 V Nominal current IN 10 A 10 A mm/AWG/kcmil 26-10 26-10 DNV GL https://approvalfinder.dnvgl.com/ FILE E 60425 FILE E 60425 TAE00001S9 03/22/2021Page6/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Approvals IECEE CB Scheme http://www.iecee.org/ NL-61745 LR http://www.lr.org/en LR2003762TA cULus Recognized Accessories Accessories DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 03/22/2021Page7/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 03/22/2021Page8/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 03/22/2021Page9/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 03/22/2021Page10/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp-CLIPFIX 35-5-3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp-E/NS 35 N-0800886 End clamp, width: 9.5 mm, color: gray Jumper Plug-in bridge-FBS 2-6-3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red 03/22/2021Page11/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Plug-in bridge-FBS 3-6-3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red Plug-in bridge-FBS 4-6-3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red Plug-in bridge-FBS 5-6-3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red Plug-in bridge-FBS 6-6-1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red Plug-in bridge-FBS 10-6-3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red 03/22/2021Page12/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Plug-in bridge-FBS 20-6-3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red Plug-in bridge-FBS 50-6-3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red Plug-in bridge-FBSR 2-6-3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red Plug-in bridge-FBSR 3-6-3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red Plug-in bridge-FBSR 4-6-3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red 03/22/2021Page13/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Plug-in bridge-FBSR 5-6-3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red Plug-in bridge-FBSR 10-6-3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red Plug-in bridge-FBS 2-6 BU-3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue Plug-in bridge-FBS 3-6 BU-3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue Plug-in bridge-FBS 4-6 BU-3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue 03/22/2021Page14/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Plug-in bridge-FBS 5-6 BU-3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue Plug-in bridge-FBS 10-6 BU-3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue Plug-in bridge-FBS 20-6 BU-3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue Plug-in bridge-FBS 50-6 BU-3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue Labeled terminal marker Zack marker strip-ZB 5 CUS-0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10 03/22/2021Page15/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Zack marker strip-ZB 5,LGS:FORTL.ZAHLEN-1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 5,QR:FORTL.ZAHLEN-1050020 Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm Zack marker strip-ZB 5,LGS:GLEICHE ZAHLEN-1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 5,LGS:L1-N,PE-1050415 Zack marker strip, Strip, white, labeled, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 5 CUS-0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96 03/22/2021Page16/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Marker for terminal blocks-UCT-TM 5 CUS-0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Zack marker strip-ZB 6 CUS-0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 03/22/2021Page17/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 6,LGS:U-N-1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6 CUS-0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6 CUS-0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Marker pen Marker pen-X-PEN 0,35-0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm 03/22/2021Page18/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Screwdriver tools Screwdriver-SZS 0,6X3,5-1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Short-circuit connector Short-circuit connector-FBSRH 2-6-3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red Switching jumper Feed-through connector-DMET 5X20-3032075 Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks. Terminal marking Zack marker strip-ZB 5 :UNBEDRUCKT-1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels: 10 03/22/2021Page19/21 https://www.phoenixcontact.com/us/products/3046126 Fuse modular terminal block-UT 4-HESILED 60 (5X20)-3046126 Accessories Marker for terminal blocks-UC-TM 5-0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96 Marker for terminal blocks-UCT-TM 5-0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Zack marker strip-ZB 6:UNBEDRUCKT-1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6-0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6-0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 03/22/2021Page20/21 https://www.phoenixcontact.com/us/products/3046126 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 03/22/2021Page21/21