PS-12100 12 Volt 12.0 AH Features * Absorbent Glass Mat (AGM) technology for superior performance * Valve regulated, spill proof construction allows safe operation in any position * Power/volume ratio yielding unrivaled energy density * Rugged impact resistant ABS case and cover (UL94-HB) * Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified * U.L. recognized under file number MH 20845 Terminals Performance Specifications (mm) * F1 - Quick disconnect tabs, 0.187" x 0.032"Mate with AMP. INC. FASTON "187" series OR * F2 - Quick disconnect tabs, 0.250" x 0.032" - Mate with AMP. INC FASTON "250" series Nominal Voltage ........................................................................ 12 volts (6 cells) F1 Nominal Capacity F2 3.2 3.4 4.75 6.35 0.8 6.35 7.95 0.8 20-hr. (600mA to 10.50 volts) ....................................................... 12.0 AH 10-hr. (1.15A to 10.50 volts) .......................................................... 11.5 AH 5-hr. (2A to 10.20 volts) ............................................................... 10.0 AH 1-hr. (9A to 9.00 volts) .................................................................. 9.00 AH 15-min. (21.5A to 9.00 volts) .............................................................. 5.38 AH Physical Dimensions: in (mm) Approximate Weight ........................................................... 8.14 lbs. (3.69 kg) Energy Density (20-hr. rate) ................................ 1.64 W-h/in3 (99.79 W-h/l) Specific Energy (20-hr. rate) .............................. 17.69 W-h/lb (39.00 W-h/kg) Internal Resistance (approx.) ...................................................... 20 milliohms W Max Discharge Current (7 Min.) ............................................... 36.0 amperes Max Short-Duration Discharge Current (7 Sec.) .................... 50.0 amperes Shelf Life (% of nominal capacity at 68F (20C)) 1 Month ...................................................................................................... 97% Sealed Rechargeable Battery HT 3 Months ..................................................................................................... 91% H BA www.power-sonic.com ST B E R MU Pb YCL ED EC MH20845 12 Volt 12.0 Amp. Hr. TTE RY MODEL PS-12100 F1 (R) NONSPILLABLE L 6 Months .................................................................................................... 83% Operating Temperature Range Charge .. ........................................................... -4F (-20C) to 122F (50C) Discharge ....................................................... -40F (-40C) to 140F (60C) L: 5.95 (151) W: 4.00 (102) H: 3.70 (94) HT: 3.86 (98) Case ...................................................................................................... ABS Plastic Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Power-Sonic Chargers ........................................... PSC-122000A, 122000A-C To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. www.power-sonic.com PS-12100 12 Volt 12.0 AH (R) Discharge Characteristics 100 Charging is not necessary unless 100% of capacity is required. 80 Charging before use is necessary to help recover full capacity. 5oC (41oF) 60 o 30 C o (86 F) 40oC (104oF) 40 0 14.0 0 2 4 6 8 10 Charge may fail to restore full capacity. Do not let batteries reach this state. 20oC (68oF) 12 14 16 18 20 o 12.0 11.0 10.0 9.0 2.4 6 12 24 36 48 1 2 Discharge Time 4 6 8 10 20 4 0 h Life Characteristics in Stand-By Use 5 Retention Capacity (%) h 12 min 20 15 10 Discharge Time 0.60 24 1.2 Discharge Time vs. Discharge Current 1.2 2.4 6.0 Final Voltage 8.0 Standing Period (Months) o Ambient Temperature 20 C (68 F) 13.0 Terminal Voltage (V) Capacity Retention Ratio (%) Shelf Life & Storage Final Voltage 10.5V 2 10.2V 1 9.6V min 30 9.0V 10 5 o 8.1V 0.60 1.2 2.4 6.0 12 80 60 20 0 o Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. Chargers 1 2 3 4 Life Characteristics in Cyclic Use 120 Retention Capacity (%) Discharge Current (A) "Float" or "Stand-By" Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. 0 Years 24 Cycle Applications: Limit initial current to 3.6A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68F (20C). Hold at 14.4 to 14.7 volts until current drops to under 120mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to "float" voltage. Float Charging Voltage 2.25 - 2.30 V/Cell 40 40 C (104 F) o o 20 C (68 F) o o 0 C (32 F) Charging Ambient Temperature 20C (68F) 100 100 80 60 Discharge Depth 100% Discharge Depth 50% Discharge Depth 30% 40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) 20 0 0 200 400 600 800 1000 1200 Number of Cycles Further Information Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for "C-Series Switch Mode Chargers" and "Transformer Type A and F Series". Please contact our Technical department for advice if you have difficulty in locating suitable models. Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.. Contact Information DOMESTIC SALES Tel: +1-619-661-2020 Fax: +1-619-661-3650 national-sales@power-sonic.com www.power-sonic.com CUSTOMER SERVICE Tel: +1-619-661-2030 Fax: +1-619-661-3648 customer-service@power-sonic.com TECHNICAL SUPPORT Tel: +1-619-661-2020 Fax: +1-619-661-3648 support@power-sonic.com INTERNATIONAL SALES Tel: +1-650-364-5001 Fax: +1-650-366-3662 international-sales@power-sonic.com CORPORATE OFFICE * 7550 Panasonic Way * San Diego, CA 92154 * USA * Tel: +1-619-661-2020 * Fax: +1-619-661-3650 (c) 2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. 0211 1M Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Power-Sonic: PS-12100-F2 PS-12100F1