POWER DCH3 Series 3 Watts Data Sheet DCH3-050UK Total Power: 3 Watts Input Voltage:100 - 254 Vac # of Outputs:Single DCH3-050US DCH3-050EU SPECIAL FEATURES USB switching wallmount power supply Universal AC input Available in multiple AC plug configurations CE Mark EMC & LVD, & ErP 2011 for EU versions Regulated output Overload and short circuit protection Constant voltage, constant current Efficiency Level VI Built in EMI filter (CISPR 22 Class B) Available in various output connectors Mini USB 2.0 dc output plug - 0005 Micro USB 2.0 dc output plug - 0006 Electrical Specifications Input Input range 100 - 240 Vac (wide range) Frequency EMI/RFI 47 - 63 Hz Safety ground leakage current 10 A @ 50/60 Hz, 230 Vac input FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC89/336/EEC Output Voltage (Vo) 5 V (4.75 - 5.25 V) SAFETY Maximum power (Po) 3W UL60950/6500 cUL60950/6500 TUV60950 NEMKO60950 CB Certificate and report CE EMC,LVD & ErP 2011 for EU & UK versions CTIA ENEC Hold-up time 25 ms. typical at full load @ 115 Vac Overvoltage protection Single fault 10.5 V max. latching type Overload protection Output short circuit protection auto recover Overload protected > 800 mA Output DC cable with Mini USB 2.0 -0005 suffix and Micro USB 2.0 -0006 Connector pinout Pin 1: +V Pin 5: ground Environmental Specifications Operating temperature 0 to 45 C ambient Storage temperature -20 C to +70 C Electromagnetic susceptibility Designed to meet EN55082-1 Humidity Operating; non-condensing 20% to 90% RH Vibration Per IEC 60068-2-6 DCH3 Series Data Sheet Ordering Information Model Number Maximum Power Output Voltage Minimum Load Maximum Load Ripple P/P (PARD)1 Connector DCH3-050US-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050EU-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050UK-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050US-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050EU-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050UK-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 1.Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 2.Output should not be grounded for EMI purpose. Mechanical Drawing 2.44" (62) .736" (18.1) 1.075" (27.3) DCH3-050US - 0005 & 0006 LASER PRINTED LABEL 59" (1500) 1.028" (26.1) 2.283" (58) 2.56" (65) .74" (18.8) 1.06" (27) DCH3-050EU - 0005 & -0006 LASER PRINTED LABEL 1.028" (26.1) 2.283" (58) 59" (1500) DCH3 Series Data Sheet Mechanical Drawing 1.79" (45.5) .905" (23) DCH3-050UK - 0005 & - 0006 59" (1500) 2.016" (51.2) 2.275" (57.8) LASER PRINTED LABEL Pin Assignments PIN 5 (GROUND) PIN 1 (Vout) Notes: 1.Specifications subject to change without notice. 2.All dimensions in inches (mm), tolerance is .02". 3.Warranty: 2 years 4.Weight: 0.144 lb./0.066kg. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com DCH3 Series-DS 01Jun2017