SURFACE MOUNT DISPLAY ATTENTION Part Number: KCDA03-136 Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 0.3 inch digit height. The Blue source color devices are made with InGaN z Low current operation. on SiC Light Emitting Diode. z Excellent character appearance. Static electricity and surge damage the LEDS. z Mechanically rugged. It is recommended to use a wrist band or anti-electrostatic z Package :300pcs / reel. glove when handling the LEDs. z Gray face, white segment. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 2a. grounded. z RoHS compliant. Package Dimensions& Internal Circuit Diagram PB-A Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAH1055 REV NO: V.6B DATE: MAY/30/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000346 Selection Guide Part No. Dice KCDA03-136 Iv (ucd) [1] @ 10mA Lens Type Blue (InGaN) White Diffused Min. Typ. 1400 2500 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH1055 REV NO: V.6B DATE: MAY/30/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000346 Blue KCDA03-136 SPEC NO: DSAH1055 REV NO: V.6B DATE: MAY/30/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000346 KCDA03-136 Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH1055 REV NO: V.6B DATE: MAY/30/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000346 PACKING & LABEL SPECIFICATIONS KCDA03-136 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAH1055 REV NO: V.6B DATE: MAY/30/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000346