SENSOR / CAPTEUR
ABB Entrelec
10, Rue Ampère
69680 Chassieu, FRANCE
Tel : +33 (0)4 72 22 17 22
Fax : +33 (0)4 72 22 19 35
Commercial reference
Référence commerciale
CS1000BR
Order code
Référence de commande
1SBT171000R0001
Issued: 1999.01.20
Emis le :
Modification : 2
Date : 2003.05.19
Page 2/2
The caracteristics detailed in this leaflet are subject to change without prior notice.
Les caractéristiques détaillées dans cette brochure sont susceptibles d'évoluer sans notification préalable.
CHARACTERISTICS CARACTERISTIQUES
Nominal primary current (IPN) Courant primaire nominal (IPN) A r.m.s. (A eff.) : 1000
Measuring range (IP max) Plage de mesure (IP max) A peak (A crête) : ±2000
Max. measuring resistance (RM max) Résistance de mesure max. (RM max) Ω : 4 (@IPmax / ±24V (±5%))
Min. measuring resistance (RM min) Résistance de mesure min. (RM min) Ω : 0 (@IPN / ±24V (±5%))
Not measurable overload Surcharge non mesurable A peak (A crête) : ≤ 10000 (10ms/h)
Turn ratio (NP/NS) Rapport de transformation (NP/NS) : 1/5000
Secondary current (IS) at IPN Courant secondaire (IS) à IPN mA : 200
Accuracy at IPN Précision à IPN % : ≤ ±0.5 (@ +25°C)
Accuracy at IPN Précision à IPN % : ≤ ±1 (-40°C … +85°C)
Offset current (IS0) Courant résiduel (IS0) mA : ≤ ±0.25 (@ +25°C)
Linearity Linéarité % : ≤ 0.1
Thermal drift coefficient Coefficient de dérive thermique mA/°C : ≤ 0.01
Delay time Temps de retard µS : ≤ 1
di/dt correctly followed di/dt correctement suivi A/µs : ≤ 100
Bandwidth Bande passante kHz : 0 … 100 (-1dB)
No-load consumption current (IA0)
(Consumption current = IA0 + I S)
Courant de consommation à vide (IA0)
(Courant de consommation = IA0 + IS) mA : ≤ 15
Voltage drop (e) Tension de déchet (e) V : ≤ 2.5
Secondary resistance (RS) Résistance secondaire (RS) Ω : ≤ 46 (@ +85°C)
Dieletric strength Rigidité diélectrique
Primary / Secondary Primaire / Secondaire kV r.m.s. (kV eff.) : 12 (50Hz, 1min)
Supply voltage Tension d'alimentation V d.c. : ±15 … ±24 (±5%)
Mass Masse Kg : 0.85
Operating temperature Température de service °C : -40 … +85
Storage and starting temperature
(Unwarranted accuracy)
Température de stockage et démarrage
(Précision non garantie) °C : -50 … +90
Temperature of primary conductor
in contact with the sensor
Température du conducteur primaire
en contact avec le capteur °C : ≤ 100
Particularities
Burn-in test according to cycle
Particularités
Déverminage selon cycle
: FPTC404304
C_CS_5.doc