SHIELDED SURFACE MOUNT POWER INDUCTOR E & E Magnetic Products Limited Drum Type, SIS5022 Series, Self-Leaded Magnetically Shielded Miniature in size and high energy storage Ideal for high current requirements of notebook, video recorders and other DC-DC conversion applications Custom inductance value or tolerance is available RoHS compliant versions are available ELECTRICAL SPECIFICATION @ 25oC Part Number RoHS Part Number SIS5022M-103 SIS5022M-103F SIS5022M-153 SIS5022M-153F SIS5022M-223 SIS5022M-223F SIS5022M-333 1 Inductance (uH 20%) 2 Irms (A) 3 DCR (m Max) SRF (MHz Typ) Isat (A) Marking (XYYY) 10 40 30 8.0 3.9 M103 15 48 20 7.0 3.4 M153 22 59 18 6.0 3.1 M223 SIS5022M-333F 33 75 14 5.0 2.8 M333 SIS5022M-473 SIS5022M-473F 47 97 10 4.0 2.4 M473 SIS5022M-683 SIS5022M-683F 68 138 9 3.0 2.0 M683 SIS5022M-104 SIS5022M-104F 100 207 7 2.4 1.7 M104 SIS5022M-154 SIS5022M-154F 150 293 6 2.1 1.3 M154 SIS5022M-224 SIS5022M-224F 220 470 5 1.9 1.1 M224 SIS5022M-334 SIS5022M-334F 330 780 4 1.1 0.86 M334 SIS5022M-474 SIS5022M-474F 470 1080 3 1.1 0.73 M474 SIS5022M-684 SIS5022M-684F 680 1400 2.5 0.96 0.64 M684 SIS5022M-105 SIS5022M-105F 1000 2010 2 0.80 0.53 M105 Notes: 1. Inductance is tested at 0.1Vrms, 100kHz. 2. Saturation current, Isat, indicates the value of DC current when the inductance is 10% typical lower than its initial value. 3. Heating current, Irms, is the value of current when the temperature rising T=40 C typical. o 4. Operating temperature range: -40C to +85C. 5. The part temperature (ambient temperature + temperature rise) should not exceed the upper limit of the operating temperature under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Contact EEMPL for RoHS compliant version availability. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 1 Tel: (852) 2765 3888 Fax: (852) 2954 3304 PI049(02) Revised in 06/07 SHIELDED SURFACE MOUNT POWER INDUCTOR E & E Magnetic Products Limited Drum Type, SIS5022 Series, Self-Leaded SCHEMATICS MECHANICAL DIMENSIONS .730 Max 18.54 .110 2.79 .600 Max 15.24 .490 12.45 XYYY (DATE) Recommended PAD Layout .115 2.92 .500 12.70 Dia. .300 Max 7.62 Notes: inches 7. All dimensions are specified in mm with higher precedence in mm. 8. Unless otherwise specified, all tolerances are .010 . 0.25 9. For available RoHS part number, the part will be marked with "XYYYF", instead of "XYYY". Weight (in gram) : 2.5 typ. Tape & Reel : 350 / reel SCHEMATICS FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER 2/F Block A, Merit Industrial Centre, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304 Email: eempl@eleceltek.com Website: http://www.eleceltek.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 2 Tel: (852) 2765 3888 Fax: (852) 2954 3304 PI049(02) Revised in 06/07