Bulletin PD-21106 12/05 209CNQ...PbF SERIES 200 Amp SCHOTTKY RECTIFIER LUG TERMINAL ANODE 1 LUG TERMINAL ANODE 2 BASE COMMON CATHODE Description/ Features Major Ratings and Characteristics Characteristics Values Units IF(AV) Rectangular 200 A 135 - 150 V 10,000 A 0.71 V - 55 to 175 C waveform VRRM range IFSM @ tp = 5 s sine VF @ 100Apk, TJ=125C TJ range (per leg) The 209CNQ center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, free-wheeling diodes, welding, and reverse battery protection. 175 C T J operation Center tap module Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free Case Styles TO-244 www.irf.com 1 209CNQ...PbF Series Bulletin PD-21106 12/05 Voltage Ratings Part number VR 209CNQ135PbF 209CNQ150PbF 135 150 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 209CNQ Units Conditions (Per Leg) 100 (Per Device) 200 Max. Peak One Cycle Non-Repetitive 10,000 Surge Current (Per Leg) * See Fig. 7 1200 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A 50% duty cycle @ TC = 131 C, rectangular wave form A Following any rated 5s Sine or 3s Rect. pulse load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 15 mJ 1 A TJ = 25 C, IAS = 13 Amps, L = 0.2 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 209CNQ Units Conditions Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 1.06 1.33 0.74 V V V @ 100A @ 200A @ 100A 0.88 V @ 200A Max. Reverse Leakage Current 3 mA TJ = 25 C (Per Leg) * See Fig. 2 45 mA TJ = 125 C (1) TJ = 25 C TJ = 125 C VR = rated VR CT Max. Junction Capacitance (Per Leg) 3000 pF VR = 5V DC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 7.0 nH From top of terminal hole to mounting plane 10000 V/ s dv/dt Max. Voltage Rate of Change (Rated V R) (1) Pulse Width < 300s, Duty Cycle <2% Thermal - Mechanical Characteristics Parameters Min Typ Max Units TJ Max. Junction Temperature Range - 55 - 175 C TStg Max. Storage Temperature Range - 55 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - - 0.38 C/W Thermal Resistance, Junction to Case Per Module - - 0.19 K/W RthCS Thermal Resistance, Case to Heatsink - 0.10 - Wt Weight - 68 (2.4) - g (oz) T 2 Mounting Torque 35.4 (4) - 53.1 (6) lbf*in Mounting Torque Center Hole 30 (3.4) - 40 (4.6) (Nm) Terminal Torque 30 (3.4) - 44.2 (5) Vertical Pull - - 80 2 inch Lever Pull - - 35 lbf.in www.irf.com 209CNQ...PbF Series Bulletin PD-21106 12/05 1000 1000 Reverse Current - I R (mA) 100 Tj = 150C 100 Instantaneous Forward Current - I F (A) Tj = 125C T J = 175C 150C 10 125C 1 100C 75C 0.1 50C 0.01 25C 0.001 0 30 60 90 120 150 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage Junction Capacitance - C T (pF) 10000 10 Tj = 25C 1 0 0.5 1 1.5 Forward Voltage Drop - VFM (V) 2 T = 25C J 1000 100 0 Fig. 1 - Max. Forward Voltage Drop Characteristics 30 60 90 120 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance Z thJC (C/W) 1 D = 0.75 D = 0.50 0.1 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance) 0.01 0.001 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 209CNQ...PbF Series 200 120 180 100 160 Average Power Loss (Watts) Allowable Case Temperature (C) Bulletin PD-21106 12/05 DC 140 120 Square wave (D=0.50) 80% rated Vr applied 100 80 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 80 RMS limit 60 DC 40 20 see note (2) 60 0 0 0 20 40 60 80 100 120 140 160 Average Forward Current - IF (AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 30 60 90 120 150 Average Forward Current - IF (AV) (A) Fig. 6 - Forward Power Loss Characteristics 10000 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x R thJC ; Pd = Forward Power Loss = I F(AV) x VFM @ (I F(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = VR1 x IR (1 - D); I R @ VR1 = 80% rated VR 4 www.irf.com 209CNQ...PbF Series Bulletin PD-21106 12/05 Outline Table Conforms to JEDEC Outline TO-244 Dimensions in millimeters and (inches) Ordering Information Table Device Code www.irf.com 20 9 C N Q 1 2 3 4 5 150 PbF 6 7 1 - Average Current Rating (x 10) 2 - Product Silicon Identification 3 - C = Circuit Configuration 4 - N = NOt Isolated 5 - Q = Schottky Rectifier Diode 135 = 135V 6 - Voltage Ratings 150 = 150V 7 - Lead-Free 5 209CNQ...PbF Series Bulletin PD-21106 12/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/05 6 www.irf.com