G057VN01 V1 Contents 1. Operating Precautions .....................................................................................4 2. General Description..........................................................................................5 2.1 Display Characteristics.......................................................................................................5 2.2 Optical Characteristics .......................................................................................................6 3. Functional Block Diagram................................................................................8 4. Absolute Maximum Ratings .............................................................................9 4.1 Absolute Ratings ................................................................................................................9 4.2 Absolute Ratings of Environment .......................................................................................9 5. Electrical Characteristics ...............................................................................10 5.1 TFT-LCD Driving ..............................................................................................................10 5.2 Backlight Unit Driving ....................................................................................................... 11 6. Signal Characteristic ......................................................................................12 6.1 Pixel Format Image ..........................................................................................................12 6.2 Scanning Direction ...........................................................................................................12 6.3 The Input Data Format .....................................................................................................13 6.4 TFT- LCD Interface Signal Description.............................................................................14 6.5 TFT- LCD Interface Timing ...............................................................................................15 6.6 LED Backlight Unit Interface Signal Description ..............................................................16 6.7 Power ON/OFF Sequence ...............................................................................................16 7. Connector & Pin Assignment.........................................................................17 7.1 TFT- LCD Signal (CN1): LCD Connector .........................................................................17 7.2 LED Backlight Unit (CN2): Backlight Connector...............................................................17 7.3 PIN 1 definition of CN1 and CN2 .....................................................................................18 8. Reliability Test Criteria ...................................................................................18 9. Mechanical Characteristics............................................................................20 10. Label and Packaging ....................................................................................21 10.1 Shipping Label (on the rear side of TFT-LCD display) ...................................................21 10.2 Carton Package .............................................................................................................21 11 Safety ..............................................................................................................22 11.1 Keen Edge Requirements ..............................................................................................22 11.2 Materials .........................................................................................................................22 11.3 Capacitors ......................................................................................................................22 11.4 National Test Lab Requirement ......................................................................................22 G057VN01 V1 Ver. 0.1 2/22 G057VN01 V1 Record of Revision Version and Date Page 0.1, May.22, 2009 All Old description New Description Remark First edition preliminary specifications G057VN01 V1 Ver. 0.1 3/22 G057VN01 V1 1. Operating Precautions 1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connecting or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard object. 6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. 7) Do not open nor modify the TFT-LCD module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED Reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged. 10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply abnormal force (rotate, tilt...etc.) to the Connector of the TFT-LCD Module. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. 12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, response time. 14) Continuous operating TFT-LCD Module under high temperature environment may accelerate LED light bar exhaustion and reduce luminance dramatically. 15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce image sticking. It's recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen. G057VN01 V1 Ver. 0.1 4/22 G057VN01 V1 2. General Description G057VN01 V1 is designed for industrial display applications with VGA (640 x RGB x 480) resolution and 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and backlight unit including LED driver circuit. G057VN01 V1 offers CMOS interface for display signal input. 2.1 Display Characteristics The following items are G057VN01 V1 characteristics summary at 25 (Room Temperature). Items Unit Specifications Screen Diagonal inch 5.7 Active Area mm 115.2(H) x 86.4(V) Pixels H x V Pixel Pitch 640 x 3(RGB) x 480 mm 0.18 x 0.18 Pixel Arrangement R.G.B. Vertical Stripe Display Mode TN, Normally White Nominal Input Voltage VDD Volt 3.3 typ. Typical Power Consumption Watt 3.34W (LCD:0.46W/LED BLU: 2.88W) @ All black pattern, Full Load and VLED=12V Weight Physical Size Grams mm 160g (typ.), 175g (max.) 144.0(H)x 104.6(V) x 12.3(D) (typ.) Electrical Interface CMOS 6-bit Parallel RGB Surface Treatment Anti-Glare, Hardness 3H Support Color 262K colors The most suitable view angle 12 o'clock Temperature Range Operating Storage (Non-Operating) RoHS Compliance o C C o -30 to +85 -30 to +85 RoHS Compliance G057VN01 V1 Ver. 0.1 5/22 G057VN01 V1 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 Item Unit White Luminance cd/m2 Uniformity % Conditions VLED =12V, DPWM =100% (center point) (Room Temperature). Min. Typ. Max. Remark 525 700 - Note 1 - 1.3 500 800 - 5 Points Contrast Ratio Response Time Viewing Angle msec Rising - 15 20 msec Falling - 10 15 msec Rising + Falling - 25 35 degree degree Horizontal CR = 10 (Right) (Left) 70 80 - 70 80 - degree degree Vertical CR = 10 (Upper) (Lower) 60 70 - 60 70 - White x 0.263 0.313 0.363 White y 0.279 0.329 0.379 Red x 0.510 0.560 0.610 Red y 0.280 0.330 0.380 Green x 0.275 0.325 0.375 Green y 0.535 0.585 0.635 Blue x 0.100 0.150 0.200 Blue y 0.055 0.105 0.155 - 50 - Color / Chromaticity Coordinates (CIE 1931) Color Gamut % Note 1, 2, 3 Note 4 Note 5 Note 6 Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture Test Point Center Environment < 1 lux LCD Module SR_3 or equivalent measuring distance Module Driving Equipment G057VN01 V1 Ver. 0.1 6/22 G057VN01 V1 Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H)) W W /4 W /4 W /4 W /4 H /4 1 2 H /4 3 H H /4 5 4 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition. Maximum Brightness of five points W5 = Minimum Brightness of five points Note 4: Definition of contrast ratio (CR): Contrast ratio (CR) = Brightness @ "White" state Brightness @ "Black" state Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from "White" to "Black" (falling time) and from "Black" to "White" (rising time), respectively. The response time interval definition is between 10% and 90% of amplitude. Please refer to the figure as below. % Tf Tr 100 90 Optical response White Black White 10 0 G057VN01 V1 Ver. 0.1 7/22 G057VN01 V1 Note 6: Definition of viewing angle 10, at the screen center, over 180 horizontal and 180 vertical range. The 180 horizontal (L, R) and 180 vertical (H, L) range are illustrated as following figure. 3. Functional Block Diagram The following diagram shows the functional block of the G057VN01 V1 color TFT/LCD module. G057VN01 V1 Ver. 0.1 8/22 G057VN01 V1 4. Absolute Maximum Ratings 4.1 Absolute Ratings Item Symbo Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +3.6 Volt Ta= 25 C LCD Input Signal Voltage VIN -0.3 +3.6 Volt Ta= 25 C LED BLU Drive Voltage VLED 0 23 Volt Ta= 25 C VPWM 0 8 Volt Ta= 25 C LED Dimming Input Voltage o o o o Hi h 4.2 Absolute Ratings of Environment Item Symbol Min Max Unit Remark Operating Temperature TOP -30 +85 Note 1, 2 Operation Humidity HOP 5 95 %RH Note 1, 2 Storage Temperature TST -30 +85 Note 1 Storage Humidity HST 5 95 %RH Note 1 Note 1: Maximum Wet- tion. Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25 only. G057VN01 V1 Ver. 0.1 9/22 G057VN01 V1 5. Electrical Characteristics 5.1 TFT-LCD Driving 5.1.1 Power Specification Symbol Parameter Min Typ Max Units 3.0 3.3 3.6 Volt VDD Logic/LCD Drive Voltage IDD VDD Current - 140 155 mA Irush LCD Inrush Current - - 1.5 A PDD VDD Power - 0.46 0.51 Watt Allowable Logic/LCD Drive Ripple Voltage - - 100 mVp-p Remark All Black Pattern (VDD=3.3V, at 60Hz) Note 1 All Black Pattern (VDD=3.3V, at 60Hz) All Black Pattern VDDrp (VDD=3.3V, at 60Hz) Note 1: Measurement condition: +3.3V D6 D5 D2 D1 Q3 AO6402 (LCD Module Input) D1 D2 D5 D6 C1 1uF/16V Q3 AO6402 R2 S G 1K 2 C3 SW1 1 VDD VCC G R1 47K (High to Low) Control Signal F1 S +12.0V SW MAG-SPST R2 VR1 0.01uF/25V 47K 1K C2 1uF/25V 3.3V 90% 10% 0V 0.5ms VDD rising time G057VN01 V1 Ver. 0.1 10/22 G057VN01 V1 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Parameter Symbol Min. Typ. Max. Unit Logic Input Voltage for High VIH 0.7VDD - VDD Volt Display Signals Low VIL 0 - 0.3VDD Volt High VIH 0.7VDD - VDD Volt Low VIL 0 - 0.3VDD Volt Remarks Input Voltage for RL/UD 5.2 Backlight Unit Driving 5.2.1 Parameter guideline for LED Following characteristics are measured under stable condition using a LED driving board at 25 Symbol Parameter Min Typ Max Units 20 Volt om Temperature) Remark VLED Input Voltage 9 12 ILED Input Current - 0.24 A VLED =12V, DPWM =100% PLED Power Consumption - 2.88 W VLED =12V, DPWM =100% Inrush Current - TBD A VLED =12V, DPWM =100% IrushLED VPWM DIM Dimming control Voltage High 1.5 3.3 5.5 Volt Dimming control Voltage Low - - 0.2 Volt Note 1,2 FPWM Dimming Frequency 200 30K Hz DPWM Dimming duty cycle 1 100 % On Control Voltage 2 3.3 5.5 Volt Off Control Voltage - - 0.8 Volt 25000 50000 VLED On/Off Operating Life Hrs Note 3, 4 Note 5, 6 Note 1: PWM dimming function can be operated by PWM signal. PWM duty cycle can adjust white Luminance. (PWM High: ON and PWM Low: OFF) Note 2: PWM signal can not be floating and pull-down to ground when waiting. Note 3: Enable (VLED On/Off) must be turned on late than VLED and PWM Signal. Note 4: Enable (VLED On/Off) must be turned off early than VLED and PWM Signal. Note 5: If G057VN01 V1 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 6: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data. Note 7: See Section 6.6 for LED Backlight Unit Interface Signal Description G057VN01 V1 Ver. 0.1 11/22 G057VN01 V1 6. Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. 6.2 Scanning Direction The following figures show the image seen from the front view. The arrow indicates the direction of scan. Note 1: TFT-LCD interface signal description is shown in section 6.4. G057VN01 V1 Ver. 0.1 12/22 G057VN01 V1 6.3 The Input Data Format This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates the display of input data. G057VN01 V1 Ver. 0.1 13/22 G057VN01 V1 6.4 TFT- LCD Interface Signal Description Note 1: "Low" stands for 0V. "High" stands for 3.3V. "NC" stands for "No Connection". G057VN01 V1 Ver. 0.1 14/22 G057VN01 V1 6.5 TFT- LCD Interface Timing 6.5.1 Timing Characteristics DE mode only Signal Symbol Min. Typ. Max. Unit Remark 1/ TCLOCK 23.9 25.2 34.2 MHz Note1 Period TH 770 800 1000 Active THD TCLOCK Note1 Blanking THB 130 160 360 Period TV 516 525 570 Active TVD TLINE Note1 Blanking TVB Clock frequency (DOTCLK) Horizontal Section Vertical Section 640 480 36 45 90 Note 1: Recommended frame rate is 60 Hz. 6.5.2 Input Timing Diagram TCLOCK Input Timing Definition ( DE Mode) DOTCLK Input Data DE Invaild Data Pixel 1 Pixel 2 THB Pixel 3 Pixel N-1 Pixel N Invaild Data Pixel 1 THD TH DE TVB TVD TV G057VN01 V1 Ver. 0.1 15/22 G057VN01 V1 6.6 LED Backlight Unit Interface Signal Description Pin # Symbol Pin Description 1 VLED 12V input 2 VLED 12V input 3 GND Ground 4 GND Ground 5 PWM DIM 1~100% PWM dimming 6 LED On/Off 0V-Off; 3.3V/NC-On 6.7 Power ON/OFF Sequence VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing Value Parameter Units Min. Typ. Max. T1 0.5 - 10 ms T2 0 - 50 ms T3 0 - 50 ms T4 0 - 10 ms T5 200 - - ms T6 200 - - ms T7 500 - - ms ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. G057VN01 V1 Ver. 0.1 16/22 G057VN01 V1 7. Connector & Pin Assignment 7.1 TFT- LCD Signal (CN1): LCD Connector Manufacturer Starconn 089H33-000100-G2-R, compatible with Connector Model Number IMSA-9637S-33Y902 & ELCO 08-6210--033-340-800+ Pin# Symbol Pin# Symbol Pin# Symbol 1 GND 12 GND 23 B3 2 DOTCLK 13 G0 24 B4 3 NC 14 G1 25 B5 4 NC 15 G2 26 GND 5 GND 16 G3 27 DE 6 R0 17 G4 28 VDD 7 R1 18 G5 29 VDD 8 R2 19 GND 30 R/L 9 R3 20 B0 31 U/D 10 R4 21 B1 32 NC 11 R5 22 B2 33 GND 7.2 LED Backlight Unit (CN2): Backlight Connector Manufacturer JST Connector Model Number Mating Connecter Model Number SM06B-SRKS-G-TB, compatible with JST SM06B-SRSS-TB (LS) (SN) JST SHR-06V-BKHF-B or compatible Pin # Symbol Pin # Symbol 1 VLED 4 GND 2 VLED 5 PWM DIM 3 GND 6 LED ON/OFF G057VN01 V1 Ver. 0.1 17/22 G057VN01 V1 7.3 PIN 1 definition of CN1 and CN2 8. Reliability Test Criteria Items Required Condition Remark Temperature Humidity Bias Note 2 High Temperature Operation 85 Note 2 Low Temperature Operation -3 Note 2 High Temperature Storage 85 Note 2 Low Temperature Storage -30,300 hours Note 2 Thermal Shock Test -20/30 min ,60/30 min ,100cycles Note 2 Hot Start Test 85/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Cold Start Test -30/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Shock Test (Non-Operating) 50G,20ms,Half-sine wave, (X, Y, Z) Note 2 Vibration Test (Non-Operating) 1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z) Note 2 Contact Discharge: 8KV, 150pF(330) 1sec, 8 points, 25 times/point ESD Air Discharge: 15KV, 150pF(330) 1sec, 8 points, 25 times/point Attitude Test Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs Note 1,2 Note 2 Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test. G057VN01 V1 Ver. 0.1 18/22 G057VN01 V1 Note2: Water condensation is not allowed for each test items. Each test is done by new TFT-LCD module. Don't use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability. To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. G057VN01 V1 Ver. 0.1 19/22 9. Mechanical Characteristics 20/22 G057VN01 V1 Ver. 0.1 G057VN01 V1 G057VN01 V1 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package Max. capacity: 60 pieces TFT-LCD module per carton Max. weight: 12.95 kg per carton Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm G057VN01 V1 Ver. 0.1 21/22 G057VN01 V1 11 Safety 11.1 Keen Edge Requirements There will be no keen edges or corners on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 11.2.2 Flammability All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD Module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board. 11.3 Capacitors If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being inserted backwards. 11.4 National Test Lab Requirement The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology Equipment). G057VN01 V1 Ver. 0.1 22/22