APEM www.apem.com D-41
D
KR series
Power rocker switches
Distinctive features
Attractive rugged rocker switch
APEM will be happy to develop custom product solutions. Please contact us with your requirements.
Removable actuator
Easy to stock
Easy to customize
High performance ultrasonic
welding
Protection against dust and the
effects of continuous immersion
under pressure.
Robust roller contact
Very long life expectancy
Many electrical functions available
Optional panel seal
Up-to-date rocker design
Smooth curves
Wide choice of colours and symbols
Laser etched symbols on illuminated versions
High performance LEDs
Long life expectancy
An array of colours and voltages
Integrated resistors
Easy electrical connection
Large variety of terminal options
Up to 10 terminals
Screw, solder lug and quick-connect
The company reserves the right to change specifications without notice.
UG1410A-R2
D-42 APEM
www.apem.com
D
KR series
Power rocker switches
Specifications
SEALING
Sealing is optional.
To order a sealed product,
complete the appropriate box of
ordering format on the following
pages.
Packaging unit : 40 pieces
❑ Unique rocker design
❑ Wide choice of colours
❑ Laser etched symbols
❑ Illuminated or non-illuminated
❑ Optionally sealed to IP68 or IP69K
ELECTRICAL SPECIFICATIONS
• Currrent/voltage rating with resistive load :
- Silver plated contacts :
A: 5A 24VDC, 100.000 cycles - 10A 24VDC, 10.000 cycles
(terminals 6.35 x 0.8 only)
S: 20A 12VDC, 10.000 cycles (see Overview)
- Gold plated contacts (D) : 20mA 12V, 150.000 cycles
• Current/voltage rating with lamp load - silver contacts (A) :
- functions 1 & 6 : 100W 24VDC, 10.000 cycles
- other functions : 60W 24VDC, 10.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals
• Mechanical life :150.000 cycles min.
MATERIALS
• Case : PA 6-6
• Actuator : ABS
• Bezel : PA 6-6
• Contacts & terminals : brass, solid
silver grain, silver plated (A or S)
or brass, solid silver grain, gold
plated (D)
•
Contact roller : brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
• Sealing options :
K : IP68 to front panel components of switch only according to IEC 60529
Z : IP69K panel sealing according to DIN 40050-9
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40°C to +85°C
DIMENSIONS
Dimensions : First dimensions are in mm while inches are shown as bracketed numbers.
FICHIER: CKR46DT-P4
le 02/09/14
ECHELLE: 0.625
indice A
CKR46DT1-A
(.433)
11.00
(1.398)
35.50
50.00 Max
(1.969 Max)
25.00
(.984)
47.00
(1.850)
24.00
(.944)
U2282
12.00
(.472)
(1.830)
46.50
(.590)
15.00
➞Flat seal
APEM www.apem.com D-43
D
KR series
Power rocker switches
Overview
HOW TO ORDER
• To order a complete product, fill in all the boxes of the following order guide.
• To order case only (without actuator), finish your order number with the LED wiring code.
• To order actuator only (without case), begin the order number with code KRR, then follow the order format from
”actuator type” until the end of the options.
KR
Side A Side B
SERIES
Electrical functions
1 ON - OFF
4 ON ON ON
4-1R ON ON MOM
5MOM - ON
6ON - ON
7MOM OFF MOM
8ON OFF MOM
9ON OFF ON
Function 1 only for
6-terminal versions.
Poles
3Single pole
4Double pole
Colour
1Blue
1/4 Dark blue
2Black
3Green
4Grey
5Yellow
6Red
7Ivory
9Orange
AAluminium
bright
Terminals
Screw
06 terminals with barrier
Solder lug/quick-connect
26 terminals with barrier
46 terminals w/o barrier
A10 term. with barrier
B10 term. w/o barrier
C10 terminals for use with
connector U2292 or U3152
Normalized quick-connect
6,35x0,8
36 terminals with barrier
Terminals (continued)
56 terminals w/o barrier
D10 term. with barrier
E10 term. w/o barrier
F10 term. for use with
connector U2292 or
U3152
Normalized quick-connect
2,8x0,8
G10 term. with barrier
H10 term. w/o barrier
J10 terminals for use
with connector U2282
Wiring
See following
pages.
LEDS
XNone
ALED 6V red
BLED 6V green
CLED 6V yellow
MLED 6V blue
RLED 6V white
DLED 12V red
ELED 12V green
FLED 12V yellow
NLED 12V blue
SLED 12V white
JLED 24V red
KLED 24V green
LLED 24V yellow
PLED 24V blue
TLED 24V white
...
CASE + LEDS
ACTUATOR
Type
1For non-illuminated
application
2For illuminated
application
Area M
ACTUATOR MARKING
Orientation
N
O
S
E
Area A Area B
Symbols
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
Contacts
ASilver
DGold plated
SSilver 20A *
Symbols & Accessories : see end of section D.
Sealing
XNo
KIP68
ZIP69K
NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
* S contacts for all functions except 4 and 4-1R - for normalized quick-connect terminals 6,35x0,8 only.
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
3
2
1
6
5
4
CKRMA1-B
CKRMA2-B
FICHIER: CKRMA
le 29/04/08
ECHELLE: 0.625
indice B
A
M
B
D-44 APEM
www.apem.com
D
KR series
Power rocker switches
Case
Function 8
KR38-KR48
Function 9
KR39-KR49
Function 4
KR44
Function 4-1R
KR44-1R
MODEL
STRUCTURE
ELECTRICAL FUNCTIONS AND CONNECTIONS
2-3 1-2
5-6 4-5
Single pole Double pole
KR31 KR41 ON - OFF
KR44* ON ON ON
KR44-1R* ON ON MOM
KR35 KR45 MOM - ON
KR36 KR46 ON - ON
KR37 KR47 MOM OFF MOM
KR38 KR48 ON OFF MOM
KR39 KR49 ON OFF ON
* Function 4 : single pole in double pole case 10 terminal version 6 terminal version
CASE + LEDS
• To order case only (without rocker), finish your order number with the LED wiring code.
Bottom view
Contact
area Contact &
LED area
LED
area
Function 1 *
KR31-KR41
Positions
Function 5
KR35-KR45
Function 6
KR36-KR46
Function 7
KR37-KR47
1233 21
CKRFUN1-A
123
Positions
1233 21
CKRFUN1-A
123
In the tables below, terminal connections as viewed from bottom of switch.
Only the contact area is represented.
For single pole models, only terminals 1, 2 and 3 are to be considered (not terminals 6, 5, 4).
x = w/o terminal
o = with terminal
▲ = momentary
* Function 1 only available for 6 terminal versions.
indice A
ECHELLE: 0.45
le 25/07/07
FICHIER: CKRFUN-P6
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
CKRFUN894-A
123
456
546
123
9
10 8
7
CKRBV1-B
indice B
FICHIER: CKRBV-P6
le 29/04/08
ECHELLE: 0.625
indice B
ECHELLE: 0.45
le 12/01/09
FICHIER: CKRFUN-P6
1233 21
CKRFUN1-A
123
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
321
456
321
456
321
456
321
456
321
456
321
456
321
456
321
456
123
654
CKRFUN894-ACKRFUN1567-B
APEM www.apem.com D-45
D
KR series
Power rocker switches
Case
36 terminals with barrier
56 terminals w/o barrier
D10 terminals with barrier
E10 terminals w/o barrier
F10 terminals for use with
connector U2292 or
U3152
G10 terminals with barrier
H10 terminals w/o barrier
J10 terminals for use with
connector U2282
26 terminals with barrier
46 terminals w/o barrier
A10 terminals with barrier
B10 terminals w/o barrier
C10 terminals for use with
connector U2292 or
U3152
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
TERMINALS
06 term. with barrier
Screw
Solder lug / quick-connect
Normalized quick-connect 6,35x0,8
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
Normalized quick-connect 2,8x0,8
CONTACT MATERIALS
ASilver
DSilver, gold plated
SSilver 20A NEW!
For all functions except 4 and 4-1R - for normalized quick-connect terminals 6,35x0,8 only.
Terminals are marked
on the case.
The drawings show the
maximum possible number
of terminals.
CASE + LEDS
CASE + LEDS
2 5
(.358)
9.10
11.30
(.445)
(.269)
6.85 14.65
(.576)
5.85
(.230) (.280)
7.10
41
63
6 terminal version 10 terminal version
2.80x0.80
(.110x.031)
(.047DIA)
Ø1.20
D-46 APEM
www.apem.com
D
KR series
Power rocker switches
Case - LEDs
CKRIL-B
6
5
4
3
2
1
78
910 10
9
8
7
1
2
3
4
5
66
5
4
3
2
1
78
910 10
9
8
7
1
2
3
4
5
6
FICHIER: CKRIL-P8
le 26/07/07
ECHELLE: 0.625
indice B
LEDS
Side A
Side A
Side B
Side B
Complete each enlarged box with one of the codes listed below.
SEALING
XNo sealing
KIP68 (front panel components of switch only)
ZIP69K - Installation notice available on request
Ultrasonic welding of frame to case is standard on all
versions.
The ultrasonic welding and the optional panel seal prevent
water and dust from introducing into the switch housing.
XWithout LED
LED consumption : 20mA @ nominal voltage (25°C)
Other illumination solutions : on request.
CASE + LEDS
CASE + LEDS
Red Green Yellow Blue White
6VDC A B C M R
12VDC D E F N S
24VDC J K L P T
No
resistor U V W Y Z
Amber
4
5
6
9
Red/green
1
2
3
8
Optional seal
K
Optional seal
Z
APEM www.apem.com D-47
D
KR series
Power rocker switches
Case - LEDs
C
25
36
14
+
-
-
+
4
1
6
3
5
2
B
A (standard)
25
36
14
+
-
-
+
4
1
6
3
5
2
D - for function 1 (on-off)
with LED on side A
25
36
14
CKGRLA-B
+
4
1
6
3
5
22 5
36
14+4
1
6
3
5
2
-
-
-
+
+-
WIRING The LED wiring diagram is shown on the case.
LED connected to the load
Independent LED or integrated functions
Note : If not available,
terminals are added to
connect the LED.
• For 6 terminal versions
G(standard)
25
36
14
CKRRLG-A
7
8
9
1010 9
87-
+
4
1
6
3
5
225
36
14
7
8
9
10
-
+
+-
-
+
• For 10 terminal versions
Please contact us for other wiring solutions.
25
36
14
CKGRLD-B
+-
E F
25
36
14
CKRRLF-A
+
-
-
+
4
1
6
3
5
2
CASE + LEDS
To have independent LEDs.
H
+
-
+
-10 9
87
4
1
6
3
5
22 5
36
14
+
-
7
8
9
10 10 9
87
CKRRLH-A
4
1
6
3
5
2
R2
R1
R2
R1
R2
R1
To obtain 2 symbol illumination levels (night illumination when OFF
and higher illumination when ON).
H wiring with LED on side A available with functions 6, 8, 9 and 44.
H wiring with LED on side B available with functions 5, 6 and 9.
H wiring with 2 LEDs available with functions 8 and 9.
More information (H wiring schematics) : on request.
Dotted line = external wiring, continuous line = internal wiring
I
CKRRLI-A
10 9
87
4
1
6
3
5
2
To have a polarity inversion (typical application : fan motor).
Dotted line = external wiring
Available in Single Pole only, with H and J quick-connect terminals.
Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6.
Available with H and J quick-connect terminals.
25
36
14
+
-
ECH 1
CATAL92/CATAL2001
23.07.08
CKGRLE indice A
-
+
CKGRLE-A
4
1
6
3
5
2
D-48 APEM
www.apem.com
D
KR series
Power rocker switches
Actuator - Marking
ACTUATOR TYPE
ACTUATOR COLOUR
1Blue
1/4 Dark blue
2
3
Black
Green
Code Colour Code Colour
4
5
6
7
Grey
Yellow
Red
Ivory
Code Colour
9
A
Orange
7/1 White
Aluminium
bright
1For non-illuminated application
2For illuminated application
Other rocker design : on request.
To order actuator only (without case), begin the order number with code KRR, then follow the order format
from ”actuator type” until the end of the options.
MARKING ORIENTATION If no marking required, complete the box with code N.
Other orientations : on request
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
NOSE
ACTUATOR
ACTUATOR
ACTUATOR MARKING
Note : colours 7 and 7/1 not available on
illuminated versions.
A soft-touch varnish can be added. Consult us.
APEM www.apem.com D-49
D
KR series
Power rocker switches
Marking - Mounting
SYMBOLS
AMB
ACTUATOR MARKING
(.551)
14.00
20.20
(.795)
(.252)
6.40
(.799)
20.30
7.70
(.303)
R:6.00
(.236 R)
(.787 R)
R:20.00
87.00°
ECHELLE: 0.625
le 26/07/07
FICHIER: CKRZL-P11
indice A
CKRZL1-A
XX No symbol
Available symbols : see end of section D.
Marking colour
White marking for illuminated rockers (laser etching) and non-illuminated black
rockers (pad printing). Black marking for non-illuminated colour rockers (pad
printing). Other : on request.
Laser etching resistance
- Water and petrol resistant acccording to EN61058-1
- Tear resistant (cross-cut test) according to NF ISO 2409 : class 0
- UV resistant according to ISO 4892-2
Marking area
For illuminated versions. The symbol will be included in
the hatched area. Marking in M area : on request.
MATRIX MOUNTING
(.984 min.)
25.00 mini
(.157)
4.00 47.00 mini
(1.850 min.)
10.20
(.402)
SPECIFIC MATRIX MOUNTING FOR Z VERSION
PANEL CUT-OUT
Panel thickness : 0,8 mm to 4,6 mm
Recommended panel thickness :
between 2 mm and 3,5 mm
21.08 0/+0.3
(.830 0/+.012)
(1.449 0/+.012)
36.80 0/+0.3
CKRDE3-C
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
3
2
1
6
5
4
CKRMA1-B
CKRMA2-B
FICHIER: CKRMA
le 29/04/08
ECHELLE: 0.625
indice B
A
M
B
D-66 APEM www.apem.com
D
K range
Power rocker switches and indicators
Symbols
CODE SYMBOL DESCRIPTION
XX None -
-
-
-
-
Stop
Motion
Up motion
CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION
Revolving light
Rear
ventilator
Heating
(0637)
Door
opening
Windshield
demister/defroster
(0635)
Windshield
wiper
(0086)
Windshield
washer
(0088)
Ventilator fan
(0089)
16
17
18
19
20
21
22
23
03
04
05
06
07
08
09
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
KR series : 1:1
KL, KG and KI series : depending on space available on the product (see “Symbols” section at the end of each series).
-
-
02
01
Down motion
Hot
Cold
Hazard warning
(0085)
10
11
12
13
Traveller
lighting
14
Driver
lighting
(1421
15
Side mirror
defroster
Restarting
pump
Front
fog lights
(0633)
Rear
fog lights
(0634)
24
25
26
27
28 Propulsion
system trim
Electric motor
(0011)
31
Anchor
Beacon
(1141)
30
29
Emergency first
aid vehicle
(2565)
Load tipping
(1557)
Loading light
(2457)
Tractor, rear-ward
(1667)
Combine,
direction of
movement (1678)
Use no forks
(2406)
32
33
34
35
36
37
Transmission
(1166)
38
Working spot
light
(1145)
39
Engine
(0640)
Horn
(0244)
40
41
Lock
(1656)
Taxi sign light
(2551)
Working light
(1204)
Working light
symmetric
(1204)
-
-
42
43
44
45
46
47
APEM www.apem.com D-67
D
K range
Power rocker switches and indicators
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
KR series : 1:1
KL, KG and KI series : depending on space available on the product (see “Symbols” section at the end of each series).
CODE SYMBOL DESCRIPTION
All wheel
drive
48
CODE SYMBOL DESCRIPTION
Indicator
64
Brake release
65
Baggage room
left door
66
Baggage room
right door
67
Power blinds
68
Engine
idle control
69
Cruise
res/set
70
Driver windows
up/down
71
Middle door
opening
72
Front door
opening
73
Lighting in
baggage room
74
Cruise on/off
75
TV
76
Pump
77
Toilet
78
Toilet
decontamination
79
CODE SYMBOL DESCRIPTION
Front windshield
heating
80
Aus
81
Radiator
fan
82
Remove
retarder
83
Restricted
speed
84
Preheater
85
ABS detection
86
ECAS detection
87
Engine stop
88
Cruise
res/cancel
89
ECAS reset
90
Driver windows
heating
91
Cruise set
92
Air bag
up/down
93
Read lighting
94
Lighting
main switch
95
Differential lock
(1662)
49
-
50
-
51
-
-
Rear window
wiper
(0097)
Rear window
washer
(0099)
52
53
54
55
Lower load
(2223)
Cab lock
(1560)
56
57
Extraction
58
Pumping in
59
Rear PTO
(1572)
60
Front PTO
61
Rockshaft down
62
Rockshaft up
63
D-68 APEM www.apem.com
D
K range
Power rocker switches and indicators
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
KR series : 1:1
KL, KG and KI series : depending on space available on the product (see “Symbols” section at the end of each series).
CODE SYMBOL DESCRIPTION
Heating
using water
96
Low beam
97
Position
lights
98
Diesel
acceleration
99
Manual
mode
Clockwise
cabin rotation
Anticlockwise
cabin rotation
-
A1
A2
A3
A4
-
Parking
brake
A5
A6
-
A7
-
A8
-
A9
-
AA
-
AB
-
AC
CODE SYMBOL DESCRIPTION
-
AD
-
AE
-
AF
Battery charging
condition
(0247)
AG
Turn signals
(0084)
AH
High beam
(0082)
AJ
Differential lock,
bogie
(2600)
AK
Brushing with a
rotating brush
(0070)
AL
Differential lock,
transfer case 4x4
(2475)
AM
Loader bucket,
float
(1441)
AN
Loader bucket
(1437)
AP
Rear window
washer & wiper
(0098)
AQ
Header
Header drive
(1579)
AR
Excavator/backhoe
boom side shift
(2091)
AS
Chemical water
treatment
(1851)
AT
Grapple skidder,
single funct° boom
(1762)
AU
CODE SYMBOL DESCRIPTION
-
AV
-
AW
-
AY
-
AZ
-
B1
-
B2
-
B3
APEM www.apem.com D-69
D
K range
Power rocker switches and indicators
Accessories for KR, KL and KI series
MOUNTING PANEL CUT-OUT
For 1 element U2267 For 2 elements U2261 For 3 elements (2xU2261 + 1x U2262)
PANEL CUT-OUT
MOUNTING PANEL END
U2261
MOUNTING PANEL MIDDLE
U2262
(1.898 0/+.008)
48.20 0/+0.20
51.00 0/+0.20
(2.008 0/+.008) (3.051 0/+.008)
77.50 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(.984 0/+.008)
25.00 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(1.152)
29.26
56.00
(2.205)
(1.043)
26.503.80
(.150)
C
Front panel dismounting
22 X44 ADAPTER
U3060
Rear panel dismounting
22 X44 ADAPTER
U3070
(2.205)
56.00
26.26
(1.034)
(.150)
3.80 26.50
(1.043)
C
SINGLE MOUNTING PANEL
U2267
(.150)
3.80 26.50
(1.043)
(2.205)
56.00
32.26
(1.270)
For additional elements, add 26,40 mm (1.039)
Recommended panel thickness : 1,10 mm - 1,80 mm - 2,60 mm - 3,40 mm - 4,20 mm - 5 mm - 5,80 mm
Recommended panel thickness : 0,60 mm to
1,50 mm
Recommended panel thickness : 1,60 mm -0,1/0
to 5,60 mm -0,1/0 in stages of 0,40 mm
Adapter colours (replace 0 with code)
1/4 : dark blue - 2: black - 4 : grey
5 : yellow - 6: red - 7/1 : white
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
D-70 APEM www.apem.com
D
K range
Power rocker switches and indicators
Accessories for KR, KL and KI series
CONNECTORS
6 terminal version
For use with terminals type 2, 3, 4 or 5.
6,35 (1/4) tabs to be fitted by the user
(example : TE42282-2).
Can be used for the KG series.
10 terminal version
For use with terminals type H or J.
2,8 (.110) tabs to be fitted by the user
(example : AMP/Tyco 0-927779-3).
10 terminal version
For use with terminals type B, C, E or F.
6,35 (1/4) tabs to be fitted by the user
(example : TE42282-2).
U2260 U2282 U2292
Standard colour : black. Other colours : on request.
Connectors cannot be combined with wiring types H and I.
U2260 U2282 U2292
➀poka-yoke
45.00
(1.772)
33.40
(1.315)
20.80
(.819)
(.433)
11.00 (.984)
25.00
1
(1.441)
36.60
(.803)
20.40
11.00
(.433) (.961)
24.40
(1.157)
29.40
1
(.819)
20.80
11.00
(.433)
29.40
(1.157)
24.40
(.961)
36.60
(1.441)
C
2 tools are supplied
ACTUATOR REMOVING TOOL
EXTRACT ACTUATOR (KR ONLY)
Allows the extraction of the rocker / rocker support assembly.
Place the 2 claws under the support and push as indicated by the arrow.
EXTRACT ROCKER (KR ONLY)
Allows to separate the rocker from its support.
Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the
opposite direction.
EXTRACT SWITCH (KR, KL AND KI)
Allows to extract switch from panel mounting units. 2 tools are necessary.
Insert the tools between switch and panel mounting units from the rear to compress the snap-
in device. Pull off switch manually.
U3052
APEM www.apem.com D-71
D
K range
Power rocker switches and indicators
Accessories for KR, KL and KI series
BLANKING CAPS
U2271 Blue
U2271/4 Dark blue
U2272
U2273
Black
Green
Code Colour Code Colour
U2274
U2275
U2276
U2277
Grey
Yellow
Red
Ivory
U2279 Orange
Usefull for future extensions.
Recommended panel thickness :
1,50 mm to 6 mm
1.50
(.059)
22.00
(.866)
25.00
(.984) (.248)
6.30
44.10
(1.736) (.819)
20.80
46.80
(1.843)
Connectors can be hanged on specific hole plugs. Contact APEM.
10 terminal version
For use with terminals type B, C, E or F.
6,35 (1/4) tabs to be fitted by the user
(example : «Timer» terminals TE927833-2)
U3152
U3152
➀poka-yoke
1
(.819)
20.80
11.00
(.433)
29.40
(1.157)
24.40
(.961)
36.60
(1.441)
C
New!
CONNECTORS (continued)