Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
High heat resistance, 125
AIchipTM-MHBSeries
ESR : Less than MVH
Endurance : 1,500 to 3,000 hours at 125
Rated voltage range : 10 to 100V
Nominal capacitance range : 47 to 3,300µF
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
Vibration resistant structure
RoHS Compliant
SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +125
Rated Voltage Range
10 to 100Vdc
Capacitance Tolerance
±20%(M) (at 20, 120Hz)
Leakage Current
HA0 & JA0
I=0.01CV
KE0 to MN0
I=0.03CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20 after 2 minutes)
Dissipation Factor
(tanδ)
Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V
tanδ (Max.)
HA0 & JA0 0.24 0.20 0.16 0.14 ----
KE0 to MN0 0.14 0.12 0.10 0.10 0.08 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20, 120Hz)
Low Temperature
Characteristics
(Max. impedance Ratio)
Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V
HA0 & JA0
Z(-25)/Z(+20)
3222----
Z(-40)/Z(+20)
4333----
KE0 to MN0
Z(-25)/Z(+20)
222222
Z(-40)/Z(+20)
4 4 4 4 4 4 (at 120Hz)
Endurance
HA0 & JA0
The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied
for 2,000 hours at 125.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)300% of the initial specified value
Leakage current The initial specified value
KE0 to MN0
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the
rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125.
Time
KE0 & KG5 1,500hours
LH0 & MH0 2,000hours
KN0 & LN0 & MN0
3,000hours
Capacitance change
≦±30% of the initial value
D.F. (tanδ)300% of the initial specified value
Leakage current The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)300% of the initial specified value
Leakage current The initial specified value
DIMENSIONS [mm]
φD±0.5
L±0.5
0.3max.
A±0.2
W
C±0.2
B±0.2
P
φD±0.5
B±0.2
L±0.5
0.3max.
A±0.2
W
C±0.2
P
: Dummy terminals
Size code : HA0 to MN0
Terminal Code : G(Vibration resistant structure)
Size code : HA0 to MN0
Terminal Code : A
Vent
(Except HA0)
Vent
(Except HA0)
PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101
)
Taping·Tray
code
Terminal code
(A, G)
Voltage code (ex. 35V:350,100V:101)
Series code
Category
E M H B A A A A D A A A A A A A GM
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (surface mount type)"
MHB
Lower ESR
MVH P108
Lower ESR
MHJ P114
Size code
HA0
JA0
KE0
KG5
LH0
LN0
MH0
MN0
φ
D
8
10
12.5
12.5
16
16
18
18
L
10.0
10.0
13.5
16.0
16.5
21.5
16.5
21.5
A
8.3
10.3
13.0
13.0
17.0
17.0
19.0
19.0
B
8.3
10.3
13.0
13.0
17.0
17.0
19.0
19.0
C
9.0
11.0
13.7
13.7
18.0
18.0
20.0
20.0
W
0.7 to 1.1
0.7 to 1.1
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
1.0 to 1.3
P
3.1
4.5
4.2
4.2
KN0 12.5 21.5 13.0 13.0 13.7 1.0 to 1.3 4.2
6.5
6.5
6.5
6.5
MARKING
EX) 16V220µF
KE0 to MN0
HA0, JA0
MHB
2A
1000
35V
EX) 35V1,000µF
CHB
Rated v
oltage symbol (HA0, JA0)
Rated voltage (Vdc)
Symbol
10
A
16
C
25
E
35
V
5J
220
112 CAT. No. E1001O
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
AIchipTM-MHBSeries
STANDARD RATINGS
WV
(Vdc)
Cap
(µF)
Size
code
ESR(Initial)
(Ω max./100k to 400kHz)
ESR(End of life)
(Ω max.) Rated ripple current
(mArms/125,
100k to 400kHz)
Part No.
100kHz 400kHz
20-4020-40-40
10 330 HA0 0.3 3.0 6.0 240 EMHB100 DA331MHA0G
470 JA0 0.2 2.0 4.5 330 EMHB100 DA471MJA0G
16 100 HA0 0.3 3.0 6.0 240 EMHB160 DA101MHA0G
220 HA0 0.3 3.0 6.0 240 EMHB160 DA221MHA0G
25
100 HA0 0.3 3.0 6.0 240 EMHB250 DA101MHA0G
220 HA0 0.3 3.0 6.0 240 EMHB250 DA221MHA0G
330 JA0 0.2 2.0 4.5 330 EMHB250 DA331MJA0G
820 KE0 0.060 0.30 0.30 3.7 1,320 EMHB250 RA821MKE0S
1,100 KG5 0.056 0.28 0.28 3.4 1,470 EMHB250RA112MKG5S
(1,500) (KN0) (0.044) (0.22) (0.18) (2.2) (1,620)
(EMHB250 TR152MKN0S)
1,600 LH0 0.047 0.24 0.24 2.9 1,820 EMHB250DA162MLH0S
2,200 MH0 0.045 0.23 0.23 2.8 2,000 EMHB250DA222MMH0S
2,700 LN0 0.034 0.17 0.10 1.3 2,280 EMHB250DA272MLN0S
3,300 MN0 0.032 0.16 0.090 0.60 2,490 EMHB250 DA332MMN0S
35
47 HA0 0.3 3.0 6.0 240 EMHB350 DA470MHA0G
100 HA0 0.3 3.0 6.0 240 EMHB350 DA101MHA0G
100 JA0 0.2 2.0 4.5 330 EMHB350 DA101MJA0G
220 JA0 0.2 2.0 4.5 330 EMHB350 DA221MJA0G
560 KE0 0.060 0.30 0.30 3.7 1,320 EMHB350 RA561MKE0S
680 KG5 0.056 0.28 0.28 3.4 1,470 EMHB350 RA681MKG5S
(910) (KN0) (0.044) (0.22) (0.18) (2.2) (1,620)
(EMHB350 TR911MKN0S)
1,000 LH0 0.047 0.24 0.24 2.9 1,820 EMHB350DA102MLH0S
1,300 MH0 0.045 0.23 0.23 2.8 2,000 EMHB350DA132MMH0S
1,600 LN0 0.034 0.17 0.10 1.3 2,280 EMHB350DA162MLN0S
2,200 MN0 0.032 0.16 0.090 0.60 2,490 EMHB350 DA222MMN0S
50
270 KE0 0.11 0.55 0.55 6.6 980 EMHB500 RA271MKE0S
360 KG5 0.10 0.50 0.50 6.0 1,090 EMHB500 RA361MKG5S
(470) (KN0) (0.076) (0.38) (0.38) (4.6) (1,200)
(EMHB500 TR471MKN0S)
510 LH0 0.087 0.44 0.44 5.2 1,320 EMHB500DA511MLH0S
680 MH0 0.087 0.44 0.44 5.2 1,420 EMHB500DA681MMH0S
820 LN0 0.050 0.25 0.25 3.0 2,040 EMHB500DA821MLN0S
1,100 MN0 0.050 0.25 0.25 3.0 2,240 EMHB500DA112MMN0S
63
200 KE0 0.22 1.54 0.88 14 540 EMHB630 RA201MKE0S
270 KG5 0.17 1.19 0.68 11 650 EMHB630 RA271MKG5S
(330) (KN0) (0.13) (0.94) (0.53) (8.5) (830)
(EMHB630 TR331MKN0S)
360 LH0 0.15 1.05 0.60 9.6 780 EMHB630DA361MLH0S
470 MH0 0.12 0.84 0.48 7.7 940 EMHB630DA471MMH0S
560 LN0 0.085 0.58 0.19 3.0 1,790 EMHB630DA561MLN0S
750 MN0 0.070 0.49 0.19 3.0 1,910 EMHB630DA751MMN0S
80
130 KE0 0.22 1.54 0.88 14 540 EMHB800 RA131MKE0S
160 KG5 0.17 1.19 0.68 11 650 EMHB800 RA161MKG5S
(220) (KN0) (0.13) (0.94) (0.53) (8.5) (830)
(EMHB800 TR221MKN0S)
240 LH0 0.15 1.05 0.60 9.6 780 EMHB800DA241MLH0S
330 MH0 0.12 0.84 0.48 7.7 940 EMHB800DA331MMH0S
390 LN0 0.085 0.58 0.19 3.0 1,790 EMHB800DA391MLN0S
510 MN0 0.070 0.49 0.19 3.0 1,910 EMHB800DA511MMN0S
100
75 KE0 0.28 2.24 1.1 22 480 EMHB101RA750MKE0S
100 KG5 0.21 1.68 0.84 17 580 EMHB101 RA101MKG5S
(130) (KN0) (0.17) (1.32) (0.66) (13) (740)
(EMHB101 TR131MKN0S)
130 LH0 0.18 1.44 0.72 14 720 EMHB101 DA131MLH0S
180 MH0 0.15 1.20 0.60 12 840 EMHB101 DA181MMH0S
220 LN0 0.11 0.88 0.25 3.9 1,580 EMHB101DA221MLN0S
300 MN0 0.091 0.73 0.22 3.9 1,690 EMHB101DA301MMN0S
: Enter the appropriate terminal code.
( ) :Second standard
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Size code
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k
HA0 to JA0 47 to 470 0.93 0.97 1.00 1.00
KE0 to MN0
75 to 200 0.40 0.75 0.90 1.00
220 to 560 0.50 0.85 0.94 1.00
680 to 1,600 0.60 0.87 0.95 1.00
2,200 to 3,300 0.75 0.90 0.95 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Low impedance, 105
113 CAT. No. E1001O
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
United Chemi-Con (UCC):
EMHB250ADA101MHA0G EMHB100ADA331MHA0G EMHB100ADA471MJA0G EMHB160ADA101MHA0G
EMHB160ADA221MHA0G EMHB250ADA221MHA0G EMHB250ADA331MJA0G EMHB350ADA101MHA0G
EMHB350ADA101MJA0G EMHB350ADA221MJA0G EMHB350ADA470MHA0G