Film capacitors – AC capacitors
Motor run capacitors
400 V; class B; 85 °C / 450 V; class C; 85 °C
Series/Type: B32335 – Dual MotorCap™
Ordering code:
Date: January 2008
Version: 2.0
Content of inside pages of data sheet. Data will be automatically entered into headers and footers.
Please fill in the table and then change the colour to “White”. This ensures that the table disappears
for the customer pdf.
Identification/Classification 1:
(header 1)
Film capacitors – AC capacitors
Identification/Classification 2:
(header 2)
Motor run capacitors
Ordering code:
Series/Type: B32335 – Dual MotorCap™
Preliminary data (optional):
(if necessary)
Department: FK PC PM AC
Date: January 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – AC capacitors
Motor run capacitors B32335 – Dual MotorCap™
Construction
Dielectric: polypropylene film
Aluminum can
Soft polyurethane resin
Features
Self-healing properties
Low dissipation factor
Overpressure disconnection device
Highest safety level P2 to IEC 60252-1 2001-02
High insulation resistance
C UL file E 106388
Typical applications
For general sine wave applications,
mainly as motor run capacitor, air conditioner
Terminals
Double fast-on terminals: 6.3 × 0.8 mm and quadruple fast-on terminals: 6.3 × 0.8 mm
Mounting parts (optional)
Threaded stud at bottom of can (M8, max. torque = 5 Nm)
Technical data and specifications
Reference standards IEC 60252-1 2001-02,
EN 60252 2001,
UL 810
Safety class to IEC 60252-1 2001-02 P2
Life expectancy to IEC 60252 2001 400 V: 10000 h (class B)
450 V: 3000 h (class C)
UL 810 file E 106388
for Nashik and Gravatai plant
Approved component 10000 AFC
protected
Rated capacitance CR15+2 ... 50+8
Tolerance ±5%
Rated voltage VR400 V AC, 450 V AC
Rated frequency fR50 / 60 Hz
FK PC PM AC January 2008
Please read the important notes, Page 2 of 7
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32335 – Dual MotorCap™
Maximum ratings
Maximum permissible voltage Vmax 1.1 · VR(VR= Rated voltage)
Maximum permissible current Imax 1.3 · IR(IR = Rated current)
Test data
AC test voltage terminal to terminal VTT 2 · VR , 60 s (type test)
2 · VR , 2 s (routine test)
Insulation voltage terminals to case 2000 V AC, 60 s (type test)
2000 V AC, 2 s (routine test)
Insulation resistance Rins or time constant τ
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
3000 s
Dissipation factor tan δ at 20 °C ≤ 1.0 · 10-3 (120 Hz)
Maximum rate of voltage rise dV/dtmax 10 V/μs
Climatic data
Climatic category 25/085/21 to IEC 60068-1
Lower category Tmin –25 °C
Upper category Tmax +85 °C
Damp heat test ttest 21 days
Mechanical and thermal properties of terminal top disk material
Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 °C
Top disk material
UL 94 V2 compatible
Glow wire test to IEC 60695-2-11
Test temp 550 °C for IR ≤ 0.5 A
Test temp 850 °C for IR > 0.5 A
Self-extinguishing within 30 seconds of
withdrawing glow wire
Tracking test to IEC 60112 solution A > 250 V
Compatibility to RoHS
Compliance to directive 2002/95/EC
FK PC PM AC January 2008
Please read the important notes, Page 3 of 7
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32335 – Dual MotorCap™
Dimensional drawings
FK PC PM AC January 2008
Please read the important notes, Page 4 of 7
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32335 – Dual MotorCap™
Ordering codes and packing units
VR
V AC
CR
μF
Max. dimensions
d × l
mm
Ordering code
Packing units
pcs.
400 / 450 15+2 53 × 70 B32335B4020J0*0 on request
15+2.5 53 × 70 B32335B4076J0*0 on request
15+3 53 × 70 B32335B4021J0*0 on request
15+4 53 × 70 B32335B4022J0*0 on request
15+5 53 × 70 B32335B4023J0*0 on request
17.5+2.5 53 × 70 B32335B4077J0*0 on request
17.5+4 53 × 70 B32335B4024J0*0 on request
17.5+5 53 × 70 B32335B4025J0*0 on request
20+2 53 × 70 B32335B4027J0*0 on request
20+2.5 53 × 70 B32335B4057J0*0 on request
20+3 53 × 70 B32335B4028J0*0 on request
20+4 53 × 70 B32335B4050J0*0 on request
20+5 53 × 70 B32335B4029J0*0 on request
22+5 53 × 80 B32335B4030J0*0 on request
25+2 63.5 × 70 B32335B4031J0*0 on request
25+3 53 × 80 B32335B4032J0*0 on request
25+4 53 × 80 B32335B4033J0*0 on request
25+5 53 × 80 B32335B4034J0*0 on request
25+7.5 53 × 80 B32335B4019J0*0 on request
25+8 53 × 80 B32335B4051J0*0 on request
25+9.5 53 × 80 B32335B4053J0*0 on request
25+10 53 × 80 B32335B4056J0*0 on request
25+15 53 × 105 B32335B4098J0*0 on request
30+2 53 × 80 B32335B4035J0*0 on request
30+3 53 × 80 B32335B4073J0*0 on request
30+4 53 × 80 B32335B4036J0*0 on request
30+5 53 × 80 B32335B4037J0*0 on request
30+7.5 53 × 80 B32335B4066J0*0 on request
30+10 53 × 105 B32335B4038J0*0 on request
FK PC PM AC January 2008
Please read the important notes, Page 5 of 7
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32335 – Dual MotorCap™
VR
V AC
CR
μF
Max. dimensions
d x l
mm
Ordering code
Packing units
pcs.
400 / 450 30+12 53 × 105 B32335B4072J0*0 on request
30+15 53 × 105 B32335B4067J0*0 on request
35+2 63.5 × 70 B32335B4081J0*0 on request
35+3 53 × 80 B32335B4059J0*0 on request
35+5 53 × 105 B32335B4040J0*0 on request
35+6 53 × 105 B32335B4085J0*0 on request
35+8 53 × 105 B32335B4058J0*0 on request
35+9.5 53 × 105 B32335B4052J0*0 on request
35+10 53 × 105 B32335B4041J0*0 on request
35+12 53 × 105 B32335B4079J0*0 on request
35+15 53 × 105 B32335B4074J0*0 on request
40+4 53 × 105 B32335B4090J0*0 on request
40+5 53 × 105 B32335B4042J0*0 on request
40+7.5 53 × 105 B32335B4086J0*0 on request
40+8 53 × 105 B32335B4047J0*0 on request
40+10 53 × 105 B32335B4043J0*0 on request
40+12 53 × 105 B32335B4075J0*0 on request
40+15 53 × 105 B32335B4078J0*0 on request
45+4 53 × 105 B32335B4106J0*0 on request
45+5 53 × 105 B32335B4044J0*0 on request
45+8 53 × 105 B32335B4071J0*0 on request
45+10 53 × 105 B32335B4045J0*0 on request
50+4 63.5 × 80 B32335B4046J0*0 on request
50+5 53 × 105 B32335B4048J0*0 on request
50+8 53 × 105 B32335B4049J0*0 on request
Composition of ordering code:
*: Construction of can and plastic top
5 – Aluminum can, UL 94 V2 top
7 – Aluminum can with M8 / M12 bolt:
M8 fixing threaded bolt for diameter = 53 mm, M12 bolt for diameter = 63.5 mm
U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to
prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are
kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC January 2008
Please read the important notes, Page 6 of 7
cautions and warnings.
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,
PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
FK PC PM AC January 2008
Page 7 of 7
