SA-M30TE12 - BANNER ENGINEERING

LC80 EZ-LIGHT™ Controller

For operator-controlled activation of EZ-LIGHT products

Features

•Manually operated controllers for Andon, call-for-parts and machine

status indication

•For use with PNP input EZ-LIGHT indicators

•Models available with toggle switches or rotary switch

•Versatile mounting options

•Toggle switch model can control up to 5 indicators simultaneously

•Consult factory about customized controller/indicator packages

Indicators and accessories sold separately

Models

Switch FunctionDescriptionModel

ON-OFF-FLASH5 toggle switchesLC80T

12 position rotary switchLC80R

Specifications

Supply Voltage:Maximum: 30V dc

Minimum: Equal to the minimum voltage required for the indicator +2V dc

Example:TL50 operating voltage without controller: 18-30V dc;TL50 operating voltage with

controller: 20-30V dc

Output Loads (Colors 1-5):

Toggle Switch Model (Solid ON Mode):

Individual outputs: 200 mA maximum f or each individual output (when oper ated one at a time)

Multiple outputs: 700 mA maxim um divided between the individual outputs (not to e xceed 200

mA for any individual output)

Toggle Switch Model (Flash Mode):

Individual outputs: 200 mA maximum f or each individual output (when oper ated one at a time)

0 152677 6

7/2010P/N 152677 rev. A

Multiple outputs: 500 mA maxim um divided between the individual outputs (not to exceed the

maximum for any individual output)

Rotary Switch Model (Solid ON and Flash Mode):

Individual outputs: 200 mA maximum for each individual output

Operating Conditions:Construction: –30° to +50° C (–22° to +122° F)Housing: Polycarbonate

Toggle switches: Chrome-plated brass Certifications:Pending

Rotary Switch: Nylon with phenolic

knob

Environmental Rating:

IP54

Hookups

SWITCH 5 (+)

SWITCH 4 (+)

SWITCH 3 (+)

SWITCH 2 (+)

SWITCH 1 (+)

DEVICE COMMON

POWER COMMON

POWER +V

OFF ON

REVISION HISTORY

REV DESCRIPTION APPROVEDDATE

OTHERWISE SPECIFIED

THIRD ANGLE PROJECTION

DIMENSIONS ARE IN INCHES UNLESS

TOLERANCE ON ANGLE: ±3°

INTERPRET DIMENSIONS & TOLERANCES

PER ASME Y14.5M - 1994

DRAWING NO.

and is proprietary in general

and in detail. Its contents

shall not be revealed to

outside parties without

written consent of BANNER.

APPROVED BY

±.02

±.005

±.01

.XXX

.XX

DRAWN BY

TITLE

SIZE

SCALE

DATE

of BANNER ENGINEERING CORP.

This drawing is the property

MINNEAPOLIS, MN 55440

SHEET

REV.

BANNER ENGINEERING CORP.

ALL SHEETS ARE THE SAME REVISION STATUS

P.O. BOX 9414

4 3 2 17 6 58

8 7 6 5 4 3 2 1

1 OF 1

J. RENGEL

1:1

6-16-10

152842 B

LABEL; LC80R

C. DOLEZALEK

6-16-10

ARTWORK IMAGE:

SCALE: 1 : 1

(ARTWORK HAS BEEN OUTLINED IN ADOBE.)

MAIN VIEW TEXT MAY VARY FROM ARTWORK

DUE TO TRANSLATION ISSUES.

NOTES:

1. MATERIAL: 2 MIL. WHITE POLYESTER WITH 3 MIL. VELVET POLYCARBONATE OVERLAMINATE;

PERMANENT ADHESIVE. USE ADOBE ILLUSTRATOR FILE 152842.ai. COLOR BREAKS AS

SHOWN. PMS COLORS ARE: GREY = PMS COOL GRAY 8C, BLACK AND WHITE).

2. USE DIMENSION DRAWING: 152841 .DWG (PRO E)

3. MAXIMUM DEVIATION FROM ART WORK +/- .002. ARTWORK LOCATION TOLERANCE: +/-0.10¨

FROM SUPPLIED ARTWORK.

4. MUST MEET CSA LABEL REQUIREMENTS.

5. MUST BE UL-RECOGNIZED CONSTRUCTION FOR APPLICATION TO (SURFACE MATERIAL;

INDOOR OR OUTDOOR USE)

A INITIAL RELEASE 6-16-10 J. RENGEL C. DOLEZALEK

B REVISED ORDER OF NUMBERS ON FLASHING SIDE; 6-29-10 J. RENGEL C. DOLEZALEK

OFF OFF

: Activates Flash for corresponding color

Connections: Field-wired through

½-14 port in housing. ½-14 NPSM

REVISION HISTORY

REV DESCRIPTION APPROVEDDATE

OTHERWISE SPECIFIED

THIRD ANGLE PROJECTION

DIMENSIONS ARE IN INCHES UNLESS

TOLERANCE ON ANGLE: ±3°

INTERPRET DIMENSIONS & TOLERANCES

PER ASME Y14.5M - 1994

DRAWING NO.

and is proprietary in general

and in detail. Its contents

shall not be revealed to

outside parties without

written consent of BANNER.

APPROVED BY

±.02

±.005

±.01

.XXX

.XX

DRAWN BY

TITLE

SIZE

SCALE

DATE

of BANNER ENGINEERING CORP.

This drawing is the property

MINNEAPOLIS, MN 55440

SHEET

REV.

BANNER ENGINEERING CORP.

ALL SHEETS ARE THE SAME REVISION STATUS

P.O. BOX 9414

4 3 2 17 6 58

8 7 6 5 4 3 2 1

1 OF 1

J. RENGEL

1:1

6-16-10

152842 B

LABEL; LC80R

C. DOLEZALEK

6-16-10

ARTWORK IMAGE:

SCALE: 1 : 1

(ARTWORK HAS BEEN OUTLINED IN ADOBE.)

MAIN VIEW TEXT MAY VARY FROM ARTWORK

DUE TO TRANSLATION ISSUES.

NOTES:

1. MATERIAL: 2 MIL. WHITE POLYESTER WITH 3 MIL. VELVET POLYCARBONATE OVERLAMINATE;

PERMANENT ADHESIVE. USE ADOBE ILLUSTRATOR FILE 152842.ai. COLOR BREAKS AS

SHOWN. PMS COLORS ARE: GREY = PMS COOL GRAY 8C, BLACK AND WHITE).

2. USE DIMENSION DRAWING: 152841 .DWG (PRO E)

3. MAXIMUM DEVIATION FROM ART WORK +/- .002. ARTWORK LOCATION TOLERANCE: +/-0.10¨

FROM SUPPLIED ARTWORK.

4. MUST MEET CSA LABEL REQUIREMENTS.

5. MUST BE UL-RECOGNIZED CONSTRUCTION FOR APPLICATION TO (SURFACE MATERIAL;

INDOOR OR OUTDOOR USE)

A INITIAL RELEASE 6-16-10 J. RENGEL C. DOLEZALEK

B REVISED ORDER OF NUMBERS ON FLASHING SIDE; 6-29-10 J. RENGEL C. DOLEZALEK

OFF OFF

: Activates ON Steady for corresponding color

cord grip is optional. Cord grip

handles cable diameters 4.3 mm to

11.4 mm (see model BWA-CG.5-1) For toggle switch models, the middle switch position will turn the

corresponding color OFF. For rotary switch models , the two "OFF" positions

will turn the indicator OFF.

DIP Switch Settings for Flash Rates*

OFF Time

(seconds)

ON Time

(seconds)

DIP Switch Positions

SW6SW5SW4SW3SW2SW1

1.01.0NAOffOffNAOffOff

0.50.5NAOffOnNAOffOn

1.00.05NAOff (On**)OffNAOn (Off**)Off

0.50.05NAOnOffNAOnOff

* Some microprocessor controlled EZ-LIGHTS have a delayed startup and are not fully compatible with flash rates

listed. Consult factory for more information.

** Rotary model

P/N 152677 rev. ABanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

LC80 EZ-LIGHT Controller

LC80T Dimensions

LC80R Dimensions

Mounting Hardware Included:

•4 - M5 x 0.8 x 35 mm SS screws

•4 - M5 x 0.8 SS Hex Nuts

•4 - M5 lockwashers

•4 - Nylon spacers (12.7 mm tall)

Mounting Brackets

Mounting SystemFeaturesModel

SMBDX80D •DIN-mount bracket

•Hardware included to mount to controller

•Material: ABS

3Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

P/N 152677 rev. A

LC80 EZ-LIGHT Controller

Mounting Systems - Elevated Mount

Mounting SystemFeaturesModel

SA-M30TE12 •Streamlined acetal stand-off pipe

adapter/cover

•Connects between TL50 Tower Light

(SA-M30TE12) or K50 (SA-M30E12)

and ½” NPSM/DN15 pipe

SA-M30E12 •Mounting hardware included

AluminumStainless Steel •Elevated-use stand-off pipe (½”

NPSM/DN15)

SOP-E12-150A

Length: 150 mm (6")

SOP-E12-150SS

Length: 150 mm (6") •Polished 304 stainless steel or

anodized aluminum surface

•½ NPT thread at both ends

SOP-E12-300A

Length: 300 mm (12")

SOP-E12-300SS

Length: 300 mm (12")

•Compatible with most industrial

environments

SOP-E12-900ASOP-E12-900SS

Length: 900 mm (36")Length: 900 mm (36")

SA-E12M30

•Streamlined acetal mounting base

adapter/cover

•Connects between ½” NPSM/DN15

pipe and 30 mm (1-3/16”) drilled hole

•Mounting hardware included

WARNING . . . Not To Be Used for Personnel Protection

Never use this product as a sensing device for personnel protection. Doing so

could lead to serious injury or death

This product does NO T include the self-checking redundant circuitry necessary to allow its use in personnel saf ety

applications. A sensor f ailure or malfunction can cause either an energized or de-energized sensor output condition.

Consult your Banner Safety Products catalog for safety products that meet OSHA, ANSI and IEC standards for

personnel protection.

W arranty: Banner Engineering Corp. will repair or replace, free of charge , any product

of its manuf acture found to be def ectiv e at the time it is returned to the factory during

the warranty period.This warranty does not co ver damage or liability for the improper

application of Banner products.This warranty is in lieu of any other warranty either

expressed or implied.

LC80 EZ-LIGHT Controller