CP0005 - Vishay Presicion Group

www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30113

44 Revision: 10-Jan-11

CP High Volume

Vishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

FEATURES

• High performance for low cost

• High power to size ratio

• Ceramic cases are available with circuit board

stand-offs (designated with a ...3 model ending)

• Special cement potting compound and ceramic

case provide high thermal conductivity in a

fireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODEL

POWER RATING

P40 °C

RESISTANCE RANGE Ω

WIREWOUND

RESISTANCE RANGE Ω

METAL OXIDE

TOLERANCE

± %

WEIGHT

(typical)

CP0002 2 0.1 to 100 101 to 30K 5, 10 2.0

CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4

CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6

CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8

CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0

CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8

CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5

CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9

CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8

CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8

TECHNICAL SPECIFICATIONS

PARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400 ± 400

Short Time Overload - 5 x rated power for 5 s 5 x rated power for 5 s

Terminal Strength lb 10 minimum 10 minimum

Operating Temperature Range °C - 65 to + 275 - 65 to + 225

Dielectric Withstanding Voltage VAC 1000 1000

Maximum Working Voltage V (P x R)1/2 (P x R)1/2

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CP000515R00JE663

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical

Specifications Global

Model column for

options)

R = Decimal

K = Thousand

R1500 = 0.15 Ω

1K500 = 1500 Ω

J = ± 5.0 %

K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)

(up to 3 digits)

From 1 to 999

as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P000515R00JE66C 3

Document Number: 30113 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com

Revision: 10-Jan-11 45

CP High Volume

Wirewound/Metal Oxide Resistors,

Commercial Power, Axial Lead Vishay Dale

DIMENSIONS in inches [millimeters]

Notes

(1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.

MATERIAL SPECIFICATIONS

Element: Wirewound = Copper-nickel alloy or nickel-

chrome alloy, depending on resistance value

Metal Oxide = High temperature fired metal oxide film

Core: Wirewound = Woven fiberglass

Metal Oxide = Ceramic

Body: Steatite ceramic case with inorganic potting

compound

End Caps: Tin plated steel

Terminals: Tinned copper

Part Marking: DALE, model, wattage, value, tolerance, date

code

DERATING

GLOBAL MODEL

DIMENSIONS in inches [millimeters]

L (1)

± 0.060 [1.5]

± 0.040 [1.0]

± 0.060 [1.5]

± 0.002 [0.05]

± 0.120 [3.0]

CP0002 0.71 [18] 0.276 [7] 0.276 [7] - 0.0256 [0.65] 1.378 [35]

CP0003 0.87 [22] 0.315 [8] 0.315 [8] - 0.031 [0.8] 1.378 [35]

CP0005 0.87 [22] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35]

CP0005...3 0.87 [22] 0.394 [10] 0.354 [9] 0.413 [10.5] 0.031 [0.8] 1.378 [35]

CP0007 1.38 [35] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35]

CP0007...3 1.38 [35] 0.394 [10] 0.354 [9] 0.472 [12] 0.031 [0.8] 1.378 [35]

CP0010 1.89 [48] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35]

CP0010...3 1.89 [48] 0.394 [10] 0.354 [9] 0.472 [12] 0.031 [0.8] 1.378 [35]

CP0015 1.89 [48] 0.492 [12.5] 0.453 [11.5] - 0.031 [0.8] 1.378 [35]

CP0020 2.36 [60] 0.551 [14] 0.531 [13.5] - 0.031 [0.8] 1.378 [35]

CPxxxx

LL L LD W

CPxxxx...3

LL L

LD W

3.18 [0.125]

typical

RATED POWER IN %

AMBIENT TEMPERATURE IN °C

100

120

- 55 75 275- 25 175 225

125

Wirewound

Metal Oxide

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS (EIA-344)

Thermal Shock - 55 °C to + 275 °C (+ 225 °C for Metal Oxide), 5 cycles, 30 min dwell time ± (5.0 % + 0.05 Ω) ΔR

Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 Ω) ΔR

Dielectric Withstanding Voltage 1000 VRMS, for 1 min ± (2.0 % + 0.05 Ω) ΔR

Low Temperature Storage - 65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 Ω) ΔR

Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 Ω) ΔR

Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (10.0 % + 0.05 Ω) ΔR

Terminal Strength 5 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 Ω) ΔR

Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (4.0 % + 0.05 Ω) ΔR

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.