721
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories
Accessories
Retroreflective Targets . . . . . . . . . . . . . . . . . . . . 722
Retroreflective Tape . . . . . . . . . . . . . . . . . . . . . . 731
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732
Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740
BEAM TRACKER™. . . . . . . . . . . . . . . . . . . . . . . . 755
LAT-1 Laser Alignment Tool . . . . . . . . . . . . . . . . . 756
DBQ5 Demo Box . . . . . . . . . . . . . . . . . . . . . . . . 757
SPS100 Sensor Power Supply . . . . . . . . . . . . . . . 758
722
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
•High-quality acrylic targets, high-temperature targets, and
adhesive-backed retro tapes
•Comprehensive selection of sizes, shapes and mounting options
•Banner also offers several "micro-prism" reflectors, for use with
laser retroreflective sensors and Banner VS3 models.
NOTE: Sensing range and signal strength at any given sensor-to-target
distance will vary due to target reflectivity and target area. A
"Reflectivity Factor" is included for each target model to help
predict sensor performance, relative to the excess gain curve
plotted for target model BRT-3. Consider, also, target area when
predicting performance. Changing to a high reflectivity reflector
(like BRT-92x92C) may also extend sensor range and/or reduce
the need for frequent reflector maintenance.
Retroreflective Targets
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
BRT-3* 1.0
ø 4.8 mm
(0.19")
Mounting Hole
Clear
Acrylic
Lens
9 mm
(0.35")
84 mm
(3.30")
65°C (150°F)
65°C (150°F)BRT-2A 1.0
ø 5.8 mm
(0.23")
Mounting Hole
Clear
Acrylic
Lens
7.6 mm
(0.30")
56 mm
(2.20")
65°C (150°F)BRT-84* 1.4
ø 4.5 mm
(0.18")
Mounting Hole
Clear
Acrylic
Lens
7.4 mm
(0.29")
84 mm
(3.30")
* Optional brackets are available. See Brackets on pages 740 and 741.
Retroreflectors
723
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
65°C (150°F)
65°C (150°F)BRT-.6
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
BRT-1.5 1.0
1.0
40 mm
(1.60")
Clear
Acrylic
Lens
2.5 mm
(0.10")
7.6 mm
(0.30")
46 mm
(1.80")
18 mm
(0.70")
Clear
Acrylic
Lens
2.5 mm
(0.10")
5.1 mm
(0.20")
20 mm
(0.80")
65°C (150°F)BRT-50 1.0
50.8 mm
(2.00")
7.2 mm
(.28")
2.8 mm
(.11")
Clear
Acrylic
Lens
65°C (150°F)BRT-1 1.0
23 mm
(0.90")
Clear
Acrylic
Lens
2.5 mm
(0.10")
5.1 mm
(0.20")
25 mm
(1.00")
* Optional brackets are available. See Brackets on pages 740 and 741.
65°C (150°F)
BRT-50D* 1.0
50.8 mm
(2.00")
10.2 mm
(.40")
2.8 mm
(.11")
10 mm
(.4")
Clear
Acrylic
Lens
M5 X 0.8
724
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
50°C (120°F)BRT-42D 1.0
42 mm
(1.7")
9.0 mm
(0.35")
Clear
Acrylic
Lens
M5 x 0.8
10.0 mm
(0.39")
50°C (120°F)BRT-42A 1.0
6.8 mm
(0.27")
Clear
Acrylic
Lens
3.5 mm
(0.14")
50.0 mm
(1.97") 60 mm
(2.4")
ø 3.5 mm (2)
(0.14")
42 mm
(1.7")
50°C (120°F)BRT-50R* 1.0
50.8 mm
(2.00") 2.8 mm
(.11")
13 mm
(.5")
6.5 mm
(.26")
2 mm
(.08")
5.5 mm
(0.21")
Clear
Acrylic
Lens
50°C (120°F)BRT-25R 1.0
2.8 mm
(.11")
5.5 mm
(.21")
13 mm
(.5")
6.5 mm
(.26")
2 mm
(.08")
25.2 mm
(.99")
Clear
Acrylic
Lens
50°C (120°F)BRT-35DM 1.2
34.5 mm
(1.36")
9.2 mm
(.36")
8.4 mm
(.33")
Clear
Acrylic
Lens
M5 X 0.8
NOTE: This target has micro-prism geometry
725
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
50°C (120°F)
50°C (120°F)BRT-100X50
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
BRT-100X55A 1.5
1.5
ø 5.0 mm (2)
(0.20")
116 mm
(4.57")
55.5 mm
(2.20")
132 mm
(5.2")
9.0 mm
(0.35")
Clear
Acrylic
Lens
50.6 mm
(2.00")
101 mm
(4.0") Clear
Acrylic
Lens
8.0 mm
(0.32")
50°C (120°F)BRT-92X92C* 3.0
100 mm
(3.9")
92 mm
(3.6")
92 mm
(3.6")
3.5 mm
(0.13")
9 mm
(0.4")
100 mm
(3.9")
Clear
Acrylic
Lens
50°C (120°F)BRT-77X77C* 2.0
84.5 mm
(3.3")
77 mm
(3.0")
77 mm
(3.0")
3.5 mm
(0.13")
84.5 mm
(3.3")
9 mm
(0.4")
Clear
Acrylic
Lens
* Optional brackets are available. See Brackets on pages 740 and 741.
726
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
50°C (120°F)
50°C (120°F)BRT-36X40BM
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
BRT-48X32 1.0
1.2
32.5 mm
(1.28")
Clear
Acrylic
Lens
48.0 mm
(1.90")
8.0 mm
(0.32")
61 mm
(2.4")
51 mm
(2.0")
40 mm
(1.6")
10 mm
(0.4")
10 mm
(0.4")
20 mm
(0.8")
4.3 mm
(0.16")
7 mm
(0.3")
51 mm
(2.0")
38 mm
(1.5")
3.5 mm
(0.14")
Clear
Acrylic
Lens
65°C (150°F)BRT-80X50C 1.4
42 mm
(1.65")
50 mm
(1.97")
ø 3.5 mm (2)
(0.14")
72.0 mm
(2.83")
Clear
Acrylic
Lens
80 mm
(3.15")
7.2 mm
(0.28")
3.5 mm
(0.14")
50°C (120°F)BRT-60X40C* 1.4
34 mm
(1.34")
40.5 mm
(1.60")
Clear
Acrylic
Lens
60 mm
(2.40")
ø 3.5 mm (2)
(0.14")
52.0 mm
(2.05")
7.2 mm
(0.28")
3.5 mm
(0.14")
* Optional brackets are available. See Brackets on pages 740 and 741.
50°C (120°F)
BRT-2X2* 1.0
51 mm
(2.0")
56 mm
(2.2")
51 mm
(2.0")
30 mm
(1.2")
10 mm
(0.4")
4.2 mm x 14.2 mm Slot (2)
(0.16" x 0.56")
61 mm
(2.4")
3.5 mm
(0.14")
Clear
Acrylic
Lens
8.9 mm
(0.40")
NOTE: This target has micro-prism geometry
727
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
50°C (120°F)BRT-48X32A
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
1.0
32.5 mm
(1.28")
Clear
Acrylic
Lens
65 mm
(2.5")
ø 3.5 mm (2)
(0.14")
48.0 mm
(1.90")
56.0 mm
(2.20")
8.0 mm
(0.32")
3.5 mm
(0.14")
50°C (120°F)BRT-48X32B 1.0
Clear
Acrylic
Lens
57 mm
(2.20")
8.0 mm
(0.32")
3.5 mm
(0.14")
32.5 mm
(1.28")
4 x 10 mm (2)
(0.16 x .39")
48 mm
(1.90")
4.5 mm
(0.18")
17.0 mm
(0.67")
65°C (150°F)BRT-23X14CM 1.2
ø2 mm
(0.08")
23.0 mm
(0.91")
19.0 mm
(0.75")
13.8 mm
(0.54")
9.7 mm
(0.38")
1.0 mm
(0.04")
4.9 mm
(0.19")
50°C (120°F)BRT-40X23B 1.4
23.5 mm
(0.93")
Clear
Acrylic
Lens
47.5 mm
(1.90")
ø 3.5 mm (2)
(0.14")
40.0 mm
(1.60")
8.0 mm
(0.32")
3.5 mm
(0.14")
3.5 mm
(0.14")
12.1 mm
(0.48")
50°C (120°F)BRT-40X23 1.4
23.5 mm
(0.93")
Clear
Acrylic
Lens
40.0 mm
(1.60")
8.0 mm
(0.32")
NOTE: This target has micro-prism geometry
728
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
65°C (150°F)
50°C (120°F)BRT-40X18A
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
BRT-32X20AM 1.2
1.0
20 mm
(0.8")
26 mm
(1.0")
32 mm
(1.1")
ø3.5 mm
(0.14") 2.0 mm
(0.08")
3.0 mm
(.12")
20 mm
(0.8")
18 mm
(0.7")
Clear
Acrylic
Lens
60 mm
(2.4")
ø 3.5 mm (2)
(0.14")
50.0 mm
(1.97")
8.0 mm
(0.32")
3.5 mm
(0.14")
50°C (120°F)BRT-40X19A 1.3
19.3 mm
(0.76")
50.0 mm
(1.97")
60.2 mm
(2.37")
7.3 mm
(0.29 ")
ø4.0 mm
(0.16")
50°C (120°F)BRT-35X20A 1.4
3.5 mm
(0.14")
8 mm
(0.3")
23.5 mm
(0.93")
ø 3.5 mm (2)
(0.14")
3.8 mm
(0.15")
48 mm
(1.9")
55 mm
(2.2")
40 mm
(1.6") Clear
Acrylic
Lens
50°C (120°F)BRT-40X19AM 1.2
19.3 mm
(0.76")
50.0 mm
(1.97")
60.2 mm
(2.37")
3.2 mm
(0.13")
ø4.0 mm
(0.16")
NOTE: This target has micro-prism geometry
NOTE: This target has micro-prism geometry
729
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
†These targets are not recommended for polarized retroreflective sensors
Retroreflective Targets
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
50°C (120°F)BRT-40X20AM 1.2
20.0 mm
(0.79")
3.5 mm
2.0 mm
42.0 mm
(1.65")
37.0 mm
(1.46")
30.0 mm
(1.18")
ø3.0 mm
(0.12")
50°C (120°F)BRT-40X23A 1.4
39.1 mm
(1.54")
8.2 mm
(0.32")
32.0 mm
(1.26")
23.1 mm
(0.91")
10.0 mm
(0.39")
2x ø1.9mm
(0.8")
1.9 mm
(0.75")
3.6 mm
(0.14")
50°C (120°F)BRT-53X19A 1.4
19 mm
(0.75")
Clear
Acrylic
Lens
72 mm
(2.80")
ø 3.5 mm (2)
(0.14")
53.0 mm
(2.10")
63.0 mm
(2.48")
8.0 mm
(0.32")
3.5 mm
(0.14")
65°C (150°F)BRT-62X10AM 1.2
62 mm
(2.4")
56 mm
(2.21")
50 mm
(1.97"
3.5 mm
(0.14")
10 mm
(0.4")
NOTE: This target has micro-prism geometry
NOTE: This target has micro-prism geometry
730
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Targets
200°C (390°F)BRT-41AHT
Model
Reflectivity
Factor Dimensions
Maximum
Temperature
1.0
72 mm
(2.8")
41 mm
(1.6")
40 mm
(1.6")
ø 10 mm (2)
(0.4")
102 mm
(4.0") 128 mm
(5.0")
Glass
Lens
45 mm
(1.8")
480°C (900°F)BRT-4HT†0.15
100 mm
(4.00")
100 mm
(4.00")
0.5 mm
(0.02")
Aluminum
50°C (120°F)BRT-100X18A 1.4
18.5 mm
(0.73")
ø 4 mm (2)
(0.16")
110 mm
(4.33")
120 mm
(4.70")
6.5 mm
(0.26")
Clear
Acrylic
Lens
†These targets are not recommended for polarized retroreflective sensors.
65°C (150°F)
BRT-L 0.8
165 mm
(6.50")
Adhesive
Backing
Clear
Acrylic
Lens
3.8 mm
(0.15")
19 mm (0.75")
731
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Retroreflectors
Retroreflective Tape
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
65°C (150°F)
175°C (350°F)
60°C (140°F)
Package of 10
Package of 5
Package of 2
Single Sheet
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length
Package of 4
BRT-THG-3X3-10
BRT-THG-4X4-5
BRT-THG-8.5X11-2
BRT-THG-18X36
BRT-THG-1-100
BRT-THG-2-100
BRT-THG-3-100
BRT-T-100†
BRT-THT-100†
BRT-TVHG2X2*
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.2
0.07
0.8
75 x 75 mm (3 x 3")
100 x 100 mm (4 x 4")
216 x 280 mm (8.5 x 11")
457 x 914 mm (18 x 36")
25 mm (1") wide
50 mm (2") wide
75 mm (3") wide
25 mm (1") wide
25 mm (1") wide
50 x 50 mm (2 x 2")
Note: for maximum adhesion of all tape products, surfaces must be clean.
†These targets are not recommended for polarized retroreflective sensors.
* These are sealed micro-prism style pieces and may not be cut.
Suitable for use with Laser sensors, VS3 sensors and SME312LPC model sensors.
Not suggested for close range (less than 4") except with VS3 sensors.
UnitModel
Reflectivity
Factor Size
Maximum
Temperature
732
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Quick-disconnect (QD) cables allow sensors to be replaced or
moved quickly, minimizing down-time
•Pico-, euro-, and mini-styles are available for dc-powered sensors
•Micro- and mini-styles are available for ac-powered sensors
•Choose straight or right-angle connectors
•Mini-style receptacles are available for creating quick-disconnect
MULTI-BEAM, MAXI-BEAM and Q85 Series sensors
•Pico- and euro-style field-wireable connectors
From bottom left to top right: Right-angle
Micro-, Straight Micro-, Right-angle Pico-,
Straight Pico- and Mini-style cables
Pico-Style Quick-Disconnect Cables
Cable: PUR jacket, polyurethane connector body, POM snap-lock coupling
Conductors: 26 or 24 AWG high-flex stranded, gold-plated contacts
Temperature: -40 to +90°C (-40 to +194°F)
Voltage Rating: 30V ac/36V dc
3-Pin
Straight PKG3-2 2 m (6.5')
• M12 Laser emitters
• Q08 Diffuse Mode
sensors
• Q10 series
• Q14 series
Style
28 mm max.
(1.1")
ø 10 mm max.
(0.4")
3-Pin
Right-angle PKW3-2 2 m (6.5')
Black Wire
Blue Wire Brown Wire
Model Length Used with: Dimensions Pin-out
3-Pin
Straight
PKG3M-2
PKG3M-9
2 m (6.5')
9 m (30')
• VS1 series
• VS2 series
• VS3 series
34.7 mm
(1.37")
9.6 mm
(0.38")
M8 x 1
3-Pin
Right-angle
PKW3M-2
PKW3M-9
2 m (6.5')
9 m (30')
Black Wire
Blue Wire Brown Wire
27.9 mm
(1.10")
ø 8.3 mm
(0.33")
14.6 mm
(0.57")
23.5 mm
(0.93")
16.5 mm
(0.65")
ø9.6 mm
(0.38")
M8 x 1
Cables and Connectors
4-Pin
Straight PKG4-2
27.9 mm
(1.10")
ø 8.3 mm
(0.33")
14.6 mm
(0.57")
2 m (6.5') • MINI-BEAM 2
• Q23 series
• D11 series
• D12 series
• EZ-BEAM S12 series
• PICO-AMP
28 mm max.
(1.1")
ø 10 mm max.
(0.4")
4-Pin
Right-angle PKW4-2 2 m (6.5')
Snap-on
Threaded
Threaded
Snap-on
Snap-on
Snap-on
Connection
Type
733
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Pico-Style Quick-Disconnect Cables (continued)
6-Pin
Straight
PKG6Z-2
PKG6Z-9
Style
20 mm
(0.8")
25 mm max.
(1.0")
ø12 mm max.
(0.5")
2 m (6.5')
9 m (30')
• D10 Series sensors
28 mm max.
(1.1")
ø 10 mm max.
(0.4")
6-Pin
Right-angle
PKW6Z-2
PKW6Z-9
2 m (6.5')
9 m (30')
Snap-on
Model Length Used with: Dimensions Pin-out
Snap-on
Connection
Type
734
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Euro-Style Quick-Disconnect Cables
4-Pin
Straight
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40 to +90°C (-40 to +194°F)
Voltage Rating: 250V ac/300V dc
MQDC-406
MQDC-415
MQDC-430
4-Pin
Straight
MQD9-406
MQD9-415
2 m (6.5')
5 m (15')
• MINI-BEAM and Q45 series
NAMUR sensors
2 m (6.5')
5 m (15')
9 m (30') • Standard OMNI-BEAM (QDH
suffix)
• Q45 dc sensors (Q5 suffix)
• MINI-BEAM dc SM312 series
• EZ-BEAM dc (Q suffix except
S12)
• SP12 series
• QM42 series
• PVA sensors
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
4-Pin
Right-angle
MQDC-406RA
MQDC-415RA
MQDC-430RA
Style
2 m (6.5')
5 m (15')
9 m (30')
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
White Wire
Blue Wire
Black Wire
Brown Wire
4-Pin
Right-angle
MQD9-406RA
MQD9-415RA
2 m (6.5')
5 m (15')
Blue Wire
Brown Wire
Model Length Used with: Dimensions Pin-out
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
5-Pin
Straight
MQDC1-506
MQDC1-515
MQDC1-530
2 m (6.5')
5 m (15')
9 m (30') • MINI-BEAM Expert
• PicoDot
• Q45 Laser Retro
• R55
• R55F
• SL30, SL30E
• SL10, SL10E
• Q60
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
5-Pin
Right-angle
MQDC1-506RA
MQDC1-515RA
MQDC1-530RA
2 m (6.5')
5 m (15')
9 m (30')
White Wire
Blue Wire
Black Wire
Brown Wire
Gray Wire
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
6-Pin
Straight
MQDC-606
MQDC-615
MQDC-630
2 m (6.5')
5 m (15')
9 m (30')
• R55 Expert series
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
6-Pin
Right-angle
MQDC-606RA
MQDC-615RA
MQDC-630RA
2 m (6.5')
5 m (15')
9 m (30')
White Wire Blue Wire
Pink Wire
Black Wire
Gray Wire
Brown Wire
735
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Micro-Style Quick-Disconnect Cables
• Q45 ac series (suffix Q1)
• EZ-BEAM ac series (suffix Q1)
4-Pin
Straight
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40 to +80°C (-40 to +176°F)
Voltage Rating: 250V ac/300V dc (3-pin), 125V ac/150V dc (4-pin)
38 mm max.
(1.5")
1/2-20UNF-2B
ø 15 mm
(0.6")
38 mm max.
(1.5")
38 mm max.
(1.5")
1/2-20UNF-2B
ø 15 mm
(0.6")
38 mm max.
(1.5")
3-Pin
Straight
MQDC-306
MQDC-315
MQDC-330
2 m (6.5')
5 m (15')
9 m (30')
• MINI-BEAM ac SM2A312
series
MQAC-406
MQAC-415
MQAC-430
2 m (6.5')
5 m (15')
9 m (30')
ø 1/2-20UNF-2B
ø15 mm
(0.6")
44 mm max.
(1.7")
4-Pin
Right-angle
Style
MQAC-406RA
MQAC-415RA
MQAC-430RA
ø 1/2-20UNF-2B
ø15 mm
(0.6")
44 mm max.
(1.7")
2 m (6.5')
5 m (15')
9 m (30')
Green Wire
Red/Black
Wire
Red/White
Wire
Red Wire
3-Pin
Right-angle
MQDC-306RA
MQDC-315RA
MQDC-330RA
2 m (6.5')
5 m (15')
9 m (30')
Green Wire
Red/Black
Wire
Red/White
Wire
Model Length Used with: Dimensions Pin-out
736
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Mini-Style Quick-Disconnect Cables
• Q45 Laser Retro
• OMNI-BEAM ac power blocks
•OMNI-BEAM dc with e/m relay
• VALU-BEAM 915 series
• OTB & LTB w/SPDT relay
• Q45 series 5-wire ac
• Q45X series
4-Pin
Female Pin-
out
Straight
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold plated contacts
Temperature: -40 to +80°C (-40 to +176°F)
Voltage Rating: 250V ac/300V dc
• SM30 2-wire ac
3-Pin
Female Pin-
out
Straight
MBCC-306
MBCC-312
MBCC-330
2 m (6.5')
4 m (12')
9 m (30')
• Q45 3-wire ac (Q suffix)
• VALU-BEAM 2-wire
• VALU-BEAM emitters
• VALU-BEAM 990 series
MBCC-406
MBCC-412
MBCC-430
2 m (6.5')
4 m (12')
9 m (30')
• Q45 dc (Q suffix)
• OMNI-BEAM dc power blocks
• VALU-BEAM 912 dc series
• SM30 dc series
• Optical Touch Button (OTB)
w/solid-state output
Black Wire
Blue Wire
Brown Wire
White Wire
5-Pin
Female Pin-
out
Straight
Style
MBCC-506
MBCC-512
MBCC-530
Brown Wire
Blue Wire
Black Wire
2 m (6.5')
4 m (12')
9 m (30')
3-Pin
Female Pin-
out
Straight
SM30CC-306
SM30CC-312
2 m (6.5')
4 m (12')
Model Length Used with: Pin-out
7/8-16UN-2B
ø 28 mm max.
(1.1")
61 mm max.
(2.4")
Black Wire
Blue Wire
Brown Wire
Yellow Wire
White Wire
Red/Black Wire
Red/White Wire
Green Wire
737
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Pico-Style Field-Wireable Connectors
Contacts: Gold-plated; rated 60V ac/dc max., 4 A max.
Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20")
Temperature: -25 to +70°C (-13 to +156°F)
Environmental Rating: NEMA 6P, IP 67
13 mm
(0.5")
M8 x 1 mm
3-Pin
Straight
FIC-M8M3 Male
Style
43.5 mm
(1.7")
FIC-M8F3 Female
13 mm
(0.5")
M8 x 1 mm
Model Gender Dimensions Pin-out
43.5 mm
(1.7")
41.5 mm
(1.6")
12 mm
(0.5")
25mm
(1.0") 13 mm
(0.5")
M8 x 1 mm
3-Pin
Right-angle
FIC-M8M3A Male
41.5 mm
(1.6")
12 mm
(0.5")
25mm
(1.0")
FIC-M8F3A Female
13 mm
(0.5")
M8 x 1 mm
43.5 mm
(1.7")
41.5 mm
(1.6")
12 mm
(0.5")
25mm
(1.0") 13 mm
(0.5")
M8 x 1 mm
4-Pin
Right-angle
13 mm
(0.5")
M8 x 1 mm
FIC-M8M4A
4-Pin
Straight
FIC-M8M4 Male
Male
41.5 mm
(1.6")
12 mm
(0.5")
25mm
(1.0")
FIC-M8F4A Female
13 mm
(0.5")
M8 x 1 mm
43.5 mm
(1.7")
FIC-M8F4 Female
13 mm
(0.5")
M8 x 1 mm
738
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Euro-Style Field-Wireable Connectors
M12 x 1
10 mm
(0.4")
60 mm
(2.4")
15.0 mm
(0.59")
20 mm
(0.8")
Contacts: Gold-plated; 4-pin models rated 250V ac/dc max., 4 A max.; 5-pin models rated 50V ac/dc max., 4A max.
Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20")
Temperature: -25 to +90°C (-13 to +194°F)
Environmental Rating: NEMA 6P, IP 67
4-Pin
Right-angle
20 mm
(0.8")
FIC-M12M4A
4-Pin
Straight
FIC-M12M4 Male
Male
41 mm
(1.6")
30.5 mm
(1.20")
15.0 mm
(0.59")
M12 x 1
FIC-M12F4A Female
20 mm
(0.8")
M12 x 1
10 mm
(0.4")
60 mm
(2.4")
15.0 mm
(0.59")
Style
M12 x 1
10 mm
(0.4")
60 mm
(2.4")
15.0 mm
(0.59")
20 mm
(0.8")
5-Pin
Right-angle
20 mm
(0.8")
FIC-M12F4 Female
20 mm
(0.8")
FIC-M12M5A
5-Pin
Straight
FIC-M12M5 Male
Male
41 mm
(1.6")
30.5 mm
(1.20")
15.0 mm
(0.59")
M12 x 1
FIC-M12F5A Female
20 mm
(0.8")
M12 x 1
10 mm
(0.4")
60 mm
(2.4")
15.0 mm
(0.59")
FIC-M12F5 Female
Model Gender
20 mm
(0.8")
Dimensions Pin-out
739
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Mini-Style Quick-Disconnect Receptacles
• Q85 series
• MULTI-BEAM
• MAXI-BEAM
• Q85 series
5-Pin
Male Pin-out
Housing: Nickel chrome-plated brass or zinc alloy
Conductors: 20 AWG (3- and 4-pin), or 24 AWG (5-pin), PVC insulation, gold plated pins
Temperature: -40 to +70°C (-40 to +158°F)
Voltage Rating: 600V ac (3-pin), 300V ac (5-pin)
Black
wire
White
wire
Brown
wire
Blue
wire
Male Pinout
3-Pin
Male Pin-out MBC-3 300 mm
(12")
• MULTI-BEAM
• MAXI-BEAM
• Q85 series (emitters)
MBC-5 60 mm
(2.5")
20 mm
(0.8 in)
1/2-14NPSM
O-ring
7/8-16UN-2A
Side View
Style
28 mm
(1.1 in)
1/2-14NPSM
O-ring
7/8-16UN-2A
25 mm Hex
(1.0 in)
Side View
Black
wire
White
wire
Brown
wire
Blue
wire
Yellow wire
Male Pinout
4-Pin
Male Pin-out MBC-4 300 mm
(12")
Black
wire
Brown
wire
Blue
wire
Male Pinout
Model
Wire
Length Used with: Dimensions Pin-out
740
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Cables and Connectors
Brackets
•Choose from a wide selection of sensor mounting brackets
•Most metal brackets are constructed of stainless steel
•Most non-metallic brackets are molded from reinforced
thermoplastic polyester,, including versatile swivel models
NOTE: See the accessories listing at the end of each product
section for additional brackets which are designed
specifically for one product family
Mounting Brackets
Model Description Used with: Dimensions
DIN - 35-70:
Approx.70 mm ( 2.7")
DIN - 35-105:
Approx. 105 mm (4.1")
5.3 mm
(0.21") 7.6 mm (0.30")
35 mm
(1.4")
25.4 mm (1.00")
35 mm (1.4")
35 mm
DIN Rail
DIN - 35-140:
Approx. 140 mm (5.5")
DIN-35-70
DIN-35-105
DIN-35-140
DIN-35-70: 70 mm (2.7")
DIN-35-105: 105 mm (4.1")
DIN-35-140: 140 mm (5.5")
• D12
• D11
• RS-11 socket
• PICO-AMP
54 mm
(2.1")
34 mm
(1.3")
13 mm
(0.5")
31 mm
(1.2")
52 mm
(2.0")
68 mm
(2.7")
6 mm
(0.2")
32 mm
(1.26")
26 mm
(1.0")
11 mm
(0.4")
6 x 4.5 mm
(0.18")
ø 6.3 mm
(0.25")
4 x M3 x0.5
26 mm
(1.0")
30º
15º
ø 4.5 mm
(0.18")
R18 mm
62 mm
(2.4")
12 mm (0.47")
RMB50
• Protective mounting bracket
for retroreflective targets
• 14-gauge 316 stainless
steel
• Stainless steel M3 x 0.5
hardware is included
The following
reflectors:
• BRT-60X40C
• BRT-2X2
• BRT-50D
• BRT-50R
77 mm
(3.0")
38.5 mm
(1.5")
77 mm
(3.0")
47.5 mm
(1.87")
92 mm
(3.6")
6 mm
(0.2")
44 mm
(1.7")
30 mm
(1.2")
13 mm
(0.51")
ø 4.8 mm
(0.19")
4 x M3 x 0.5
46 mm
(1.0")
23 mm
(0.9")
30º
15º
ø 4.5 mm
(0.18")
R28 mm
6 x 4.5 mm
(0.18")
95 mm
(3.7")
12 mm (0.47")
RMB85
• Protective mounting bracket
for retroreflective targets
• 14-gauge 316 stainless
steel
• Stainless steel M3 x 0.5
hardware is included
The following
reflectors:
• BRT-3
• BRT-77X77C
741
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
Mounting Brackets
92 mm
(3.6")
77 mm
(3.0")
107 mm
(4.2")
92 mm
(3.6")
6 mm
(0.2")
77 mm
(3.0")
50 mm
(2.0")
46 mm
(1.8")
38.5 mm
(1.5")
55 mm
(2.1")
110 mm
(4.3")
13.5 mm
(0.53")
ø 4.8 mm
(0.19")
8 x M3 x 0.5
34 mm
(1.3")
15 mm
(0.59")
56 mm
(2.2")
28 mm
(1.1")
30º
15º
ø 4.5 mm
(0.18")
R33 mm
4.5 mm
(0.18")
12 mm (0.47")
RMB100
• Protective mounting
bracket for retroreflective
targets
• 14-gauge 316 stainless
steel
• Stainless steel M3 x 0.5
hardware is included
Model Description Used with: Dimensions
36 mm
(1.4")
10.6 mm
(0.42 ")
36 mm
(1.4")
26.9 mm
(1.06")
22.9 mm
(0.90")
13.5 mm
(0.53") 6.4 mm
(0.25") 17.8 mm
(0.70")
17.8 mm
(0.70")
21.6 mm
(0.85")
18.5 mm
(0.73")
21.6 mm
(0.85")
5.1 mm
(0.20")
23.6 mm
(0.93")
12.9 mm
(0.508")
12.9 mm
(0.508")
2x M3
or #4 Clearance
3x #4-40 Thru
21.1 mm
(0.83")
10.6 mm
(0.42")
12.9 mm
(0.508")
SMB127
Mounting Block
• Mounting block
• Comes with: 3/64" hex
wrench, 4 set screws
• M12 Laser
emitters
R 5.1 mm
(0.20")
20°
10°
ø 4.6 mm
(0.18")
R 3.1 mm
(0.12")
R 24.1 mm
(0.95")
Slot 4.6 mm
(0.18")
12.7 mm
(0.50")
ø 12.3 mm
(0.49")
25.4 mm
(1.00")
42.9 mm
(1.69")
38.1 mm
(1.50")
12.3 mm
(0.49")
SMB12MM • 12-gauge, stainless steel,
right angle mounting
bracket for barrel style
sensors with 12 mm
threads
• Curved mounting slot
allows the bracket ±10° of
lateral movement
• Mounting holes
accommodate M4 (#8)
hardware
The following
reflectors:
• BRT-92X92C
• BRT-77X77C
• BRT-3
• BRT-84
• S12
• SP12
SMB1812SF
• 12 mm swivel
• Black reinforced
thermoplastic polyester
• Includes stainless steel
swivel locking hardware
• S12
• SP12
36.0 mm
(1.42")
50.8 mm
(2.00")
42.0 mm
(1.65")
22.9 mm
(0.9")
25.4 mm
(1.00")
10.6 mm
(0.42")
M12 x 1
Internal
Thread
742
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB1815SF
• Swivel with set screws for
mounting of T18 or T30 by
its cable hub
• Black reinforced
thermoplastic polyester
• Includes stainless steel
swivel locking hardware
and 3/64"3 hex wrench
• T18
• T30
SMB18A
• 12-gauge, stainless steel,
right angle mounting
bracket with a curved
mounting slot for versatility
and orientation
• Clearance for M4 (#8)
hardware
• MINI-BEAM
• M18
• Q25
• S18
• T18
• QS18 (select
models only)
SMB18C
• 18 mm split clamp bracket
• Black thermoplastic
polyester
• Includes stainless steel
mounting hardware
• MINI-BEAM
• M18
• Q25
• S18
• T18
SMB18Q
• 18 mm angled flanged
bracket for Q25 sensors
• 12 ga stainless steel
• Q25
36.0 mm
(1.42")
50.8 mm
(2.00")
42.0 mm
(1.65")
22.9 mm
(0.9")
25.4 mm
(1.00")
10.6 mm
(0.42")
ø15.0 mm
(0.59")
18.5 mm
(0.73")
25.4 mm
(1.00")
41 mm
(1.6")
46 mm
(1.8")
30°
30 mm
(1.2")
R 24.2 mm
(0.95")
ø 4.6 mm*
(0.18")
4.6 mm*
(0.18")
* Use 4 mm (#8) screws
to mount bracket.
Drill screw holes
24.2 mm (0.95") apart.
7.6 mm
(0.30")
40.0 mm
(1.60")
42.4 mm
(1.67")
30.0 mm
(1.18")
2.5 mm
(0.10")
21.1 mm
(0.83")
Nut Plate
M5 x 0.8
x 60 mm
Screw (2)
13 mm
(0.5")
14.0 mm
(0.55")
19 mm
(0.75")
25.4 mm
(1.00")
41 mm
(1.60")
46 mm
(1.80")
30°
30 mm
(1.2 in)
R 24.2 mm
(0.95")
ø 4.6 mm
(0.18")*
4.6 mm
(0.18")*
* Use 4 mm (#8) screws
to mount bracket.
Drill screw holes
24.2 mm (0.95") apart.
7.6 mm
(0.30")
10 mm
(0.40')
Mounting Brackets
Model Description Used with: Dimensions
743
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB18S
• 18 mm swivel bracket
• black thermoplastic
polyester
• Includes stainless steel
mounting hardware
• MINI-BEAM
• M18
• Q25
• S18
• T18
SMB18SF
• 18 mm swivel bracket
• Black thermoplastic
polyester
• Includes stainless steel
swivel locking hardware
• MINI-BEAM
• M18
• Q25
• S18
• T18
SMB18UR
• 2-piece universal swivel
bracket for 18 mm sensors
•300 series stainless steel
• Includes stainless steel
swivel locking hardware
• MINI-BEAM
• M18
• S18
• T18
46.0 mm
(1.81")
44.5 mm
(1.75")
36.0 mm
(1.42")
2.5 mm
(0.10")
25.4 mm
(1.00")
13.0 mm (0.50") Nut Plate
Spacer
(If Required)
M5 x 0.8
x 60 mm
Screw (2)
6.4 mm
(0.25")
10.9 mm
(0.43")
36.0 mm
(1.42")
50.8 mm
(2.00")
42.0 mm
(1.65") 22.9 mm
(0.9")
25.4 mm
(1.00")
10.6 mm
(0.42")
M18 x 1
internal
thread
50.8 mm
(2.0")
66.0 mm
(2.60")
41.7 mm
(1.64")
24.6 mm
(0.97")
20.8 mm
(0.82")
16.0 mm
(0.63 ")
45.2 mm
(1.78")
ø18.3 mm
(0.72")
2.7 mm
(0.10")
2.7 mm
(0.10")
27.2 mm
(1.07")
ø20.3 mm
(0.80")
ø30.5 mm
(1.20")
R2.5 mm
(0.10")
60º
60º
46.7 mm
(1.84")
9.7 mm
(0.38")
71.1 mm
(2.80")
20.3 mm
(0.80")
4X 6.9 mm
(0.27")
20.3 mm
(0.80")
33.8 mm
(1.33")
60º
25.4 mm
(1.00")
25.4 mm
(1.00")
8.1 mm
(0.32")
41.7 mm
(1.64") 20.8 mm
(0.82")
6X #10-32 Thru
ø30.5 mm
(1.20")
63.5 mm
(2.50")
SMB18UR Top
SMB18UR Bottom
Mounting Brackets
Model Description Used with: Dimensions
744
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB300
• Steel right angle bracket
designed for 2-axis
mounting
• Clearance slot for
mounting LR/PT400
• SP300
• LR/PT400
• LP400WB
• LR/PT200
Mounting Slot for: LF/PT/400
LP400WB
Mounting Slot for: SP300D
SP300L
SP300EL/RL
4 mm (#6) Screw Clearance (4)
M5 (#10) Screw Clearance (2)
M4.5 (#8) Screw
Clearance (2)
Mounting for LR/PT200 M5 (#10) Screw
Clearance (2)
25.4 mm (1.00")
25° (2)
30° (2)
12.7 mm (0.50") 22.4 mm
(0.88")
90°
31.8 mm
(1.25")
6.4 mm
(0.25")
41.4 mm
(1.63") 47.8 mm
(1.88")
9.7 mm
(0.38")
38.1 mm
(1.50")
SMB3018SC
•18 mm swivel barrel or
side mount bracket
•Black reinforced
thermoplastic polyester
• Includes stainless steel
swivel locking hardware
• MINI-BEAM
• Q23
• QM42/QMT42
• Q25
• S18
• T18
50.8 mm
(2.00")
56.7 mm
(2.31")
Assembled
29.0 mm
(1.14")
68.0 mm
(2.68")
66.5 mm
(2.62")
M18 x 1
internal
thread
SMB30A
• 12-gauge, stainless steel,
right angle mounting
bracket with a curved
mounting slot for versatility
and orientation
• Clearance for M6 (1/4")
hardware
• SM30
• Q40
• S30
• T30
ø 30.5 mm
(1.20")
38.5 mm
(1.52")
61 mm
(2.40")
69 mm
(2.70")
30°
45 mm
(1.8")
R 40 mm
(1.58")
ø 6.3 mm
(0.25")*
6.3 mm
(0.25")*
* Use 5 mm (#10) screws to mount bracket.
Drill screw holes 40.0 mm (1.58") apart.
7.6 mm
(0.30")
SMB30C
• 30 mm split clamp bracket
• Black reinforced
thermoplastic polyester
• Includes stainless steel
mounting hardware
• OMNI-BEAM
• Q45
• VALU-BEAM
• SM30
• S30
• Q40
• T30
• OTB
56.0 mm
(2.20")
63.0 mm
(2.48")
45.0 mm
(1.77")
2.5 mm
(0.10")
31.5 mm
(1.24")
Nut Plate
M5 x 0.8
x 80 mm
Screw (2)
13 mm
(0.5")
13.5 mm (0.53")
Mounting Brackets
Model Description Used with: Dimensions
745
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB30MM
• 30 mm, 12-gauge,
stainless steel bracket with
curved mounting slots for
versatility and orientation
• Clearance for M6 (1/4")
hardware
• OMNI-BEAM
• Q45
• VALU-BEAM
• SM30
• OTB
35.1 mm
(1.38")
35.1 mm
(1.38")
69.9 mm
(2.75")
7.1 mm
.28 x 90° (2 Slots)
R 25.4 mm
(1.00")
ø30.1 mm
(1.19")
57.2 mm
(2.25")
25.4 mm
(1.00")
25.4 mm
(1.00")
ø 6.4 mm
(0.25" dia.)
57.2 mm
(2.25")
SMB30Q
• 30 mm angled flanged
mounting bracket
• Black reinforced
thermoplastic polyester
• Includes stainless steel
hardware
• Q40
SMB30S
• 30 mm swivel bracket
• Black reinforced
thermoplastic polyester
• Includes stainless steel
mounting and swivel
locking hardware
• OMNI-BEAM
• Q45
• VALU-BEAM
• SM30
• S30
• Q40
• T30
• OTB
SMB30SC
• 30 mm swivel bracket
• Black reinforced
thermoplastic polyester
• Includes stainless steel
mounting and swivel
locking hardware
• OMNI-BEAM
• Q45
• VALU-BEAM
• SM30
• S30
• Q40
• T30
• OTB
ø 30.7 mm
(1.21")
38.5 mm
(1.52")
61 mm
(2.40")
69 mm (2.70")
30°
45 mm
(1.8")
R 40 mm
(1.58")
ø 6.3 mm
(0.25")*
6.3 mm
(0.25")*
* Use 5 mm (#10 screws to mount bracket.
Drill screw holes 40.0 mm (1.58") apart.
7.6 mm
(0.30")
10 mm (0.40")
63.5 mm
(2.50")
50.8 mm
(2.00") M5 x 0.8
x 30 mm
Screw (2)
Not Shown:
(2) M5 x 0.8 x 60 mm
screws are supplied for
clamping bracket together
43.2 mm
(1.70")
25.4 mm
(1.00")
82.5 mm
(3.25")
12.2 mm
(0.48")
50.8 mm
(2.00")
58.7 mm
(2.31")
66.5 mm
(2.62")
30.0 mm
(1.18")
29.0 mm
(1.14")
12.7 mm
(0.50")
M30 x 1.5
internal
thread
Mounting Brackets
Model Description Used with: Dimensions
746
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB30SK
•Flat-mount swivel bracket
with extended range of
motion
•Black reinforced
thermoplastic polyester and
316 stainless steel
• Includes stainless steel
swivel locking hardware
• MINI-BEAM
• Q23
• QM42/QMT42
• S18
• M18
• T18
SMB30SUS
•Side mount swivel bracket
– extended range of motion
•Black reinforced
thermoplastic polyester
• Includes stainless steel
swivel locking hardware
• MINI-BEAM
• Q23
• QM42
SMB30UR
• 2-piece universal swivel
bracket for limit-switch
style sensors
•300 series stainless steel
• Includes stainless steel
swivel locking hardware
• MULTI-BEAM
• MAXI-BEAM
• Q45
• OMNI-BEAM
• LS10
78.0 mm
(3.07")
50.8 mm
(2.00")
56.7 mm
(2.31")
Assembled
29.0 mm
(1.14")
68.0 mm
(2.68")
66.5 mm
(2.62")
2 x Hole for
#6 Machine Screw
50.8 mm
(2.00")
56.7 mm
(2.31")
Assembled
29.0 mm
(1.14")
68.0 mm
(2.68")
66.5 mm
(2.62")
59.9 mm
(2.36")
76.2 mm
(3.00")
30.0 mm
(1.18")
23.1 mm
(0.91")
60º
ø38.1 mm
(1.50")
3.4 mm
(0.14")
38.1 mm
(1.50")
15.2 mm
(0.60")
8X #10-32
SMB30UR Top
SMB30UR Bottom
15.2 mm
(0.60") 27.9 mm
(1.11")
57.1 mm
(2.25")
2X ø7.1
(0.28")
31.8 mm
(1.25")
82.2 mm
(3.24")
89.8 mm
(3.54")
66.0 mm
(2.6")
50.8 mm
(2.00")
31.8 mm
(1.75") 5X 7.1 mm
(0.28")
31.8 mm
(1.25")
6X 1/4-28
90º
ø57.2 (2.25")
12.7 mm
(0.50")
25.4 mm
1.00")
77.1 mm
(3.04")
3.4 mm
(0.14")
70.0 mm
(2.75")
50.8 mm
(2.00")
9.7 mm
(0.38")
9.7 mm
(0.38")
22.4 mm
(0.88")
25.4 mm
(1.0")
Mounting Brackets
Model Description Used with: Dimensions
747
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB42F
• 13-gauge stainless steel
• Includes mounting
hardware
• QM42/QMT42
10.0 mm
(0.40")
5.0 mm
(0.20")
12.7 mm
(0.50")
25.4 mm
(1.00")
20.0 mm
(0.79")
4x M3 x 0.5
2x M4 x 0.7
12.7 mm
(0.50")
9.6 mm
(0.38")
6.4 mm
(0.25")
25.4 mm
(1.00")
23.3 mm
(0.92")
28.3 mm
(1.12")
2.3 mm
(0.09")
37.1 mm
(1.46")
48.4 mm
(1.91")
SMB42L
• 13-gauge stainless steel
• Includes mounting
hardware
• QM42/QMT42
SMB42T
• 2-axis side mounting
bracket
• Stainless steel
• Includes M3 sensor
mounting hardware
• QM42/QMT42
2.3 mm
(0.09")
12.7 mm
(0.50")
23.3 mm
(0.92")
6.4 mm
(0.25")
3x 10.0 mm
(0.40")
25.4 mm
(1.00")
33.0 mm
(1.30")
5.0 mm
(0.20")
4x M4 x 0.7
2x M3 x 0.5
40.0 mm
(1.58")
9.6 mm
(0.38")
3.0 mm
(0.12")
R 5.1 mm
(0.20")
ø 3.05 mm
(0.120")
ø 3.05 mm Slot
(0.120")
20°
90°
C
L
15°
(2)
R 24.1 mm
(0.95")
31.8 mm
(1.25")
20.1 mm
(0.79")
45.5 mm
(1.79")
20.3 mm
(0.80")
R 3.1 mm
(0.12") (2)
10° (TYP)
4.32 mm
(0.170")
Slot (2)
2.5 mm
(0.10")
Mounting Brackets
Model Description Used with: Dimensions
748
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB42U
• 13-gauge stainless steel
• Includes mounting
hardware
• QM42/QMT42
38.9 mm
(1.53")
30.0 mm
(1.18")
25.4 mm
(1.00")
3.1 mm
(0.12")
9.6 mm
(0.38")
2x 8.9 mm
(0.35")
4x M3 x 0.5
12.7 mm
(0.50")
6.5 mm
(0.25")
2x M4 x 0.7
12.7 mm
(0.50")
23.3 mm
(0.92")
2.3 mm
(0.09")
25.4 mm
(1.00")
3.1 mm
(0.12")
SMB46A
• 2-piece 12-gauge, stainless
steel bracket assembly with
precision sensor alignment
adjustment
• Includes 2 mm hex key
• S186ELD
• PicoDot
31.8 mm
(1.25")
2x 7.1 mm
(0.28")
2x 11.4 mm
(0.45")
8x M5 or #10 clearance
14.0 mm
(0.55")
60º
60º
ø30.5mm
(1.20")
ø6.6mm
(0.26")
61.0 mm
(2.40")
43.0 mm
(1.69")
64.5 mm
(2.54")
ø18.3 mm
(0.72")
C
L
8 mm
(0.3") 16 mm
(0.6")
65 mm
(2.6")
6 mm
(0.2")
5 mm (0.2")
(2x)
ø 36 mm (1.4")
ø 6.5 mm (0.26") (6x)
15 mm
(0.6")
6 mm
(0.2")
Mounting Brackets
Model Description Used with: Dimensions
• MINI-BEAM
• PicoDot
• Q23 Series
• QM42/QMT42
• Q14
SMB46DF
C
L
8 mm
(0.3") 16 mm
(0.6")
65 mm
(2.6")
27 mm
(1.1")
2 mm
(.1")
6 mm
(0.2")
5 mm (0.2")
(2x)
ø 36 mm (1.4")
ø 6.5 mm (0.26") (6x)
15 mm
(0.6")
6 mm
(0.2")
54 mm
(2.1")
• “L” bracket
• 14-gauge 316 stainless
steel
749
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB46S
• “S” bracket
• 14-gauge 316 stainless steel
• MINI-BEAM
• PicoDot
• Q23/QH23
• QM42/QMT42
• Q14
54 mm
(2.1")
C
L
8 mm
(0.3") 16 mm
(0.6")
17 mm
(0.7")
34 mm
(1.3")
65 mm
(2.6")
27 mm
(1.1")
16 mm
(0.6")
2 mm
(.1")
6 mm
(0.2")
10 mm
(0.4")
5 mm (0.2")
(4x)
ø 36 mm (1.4")
ø 6.5 mm (0.26") (6x)
3.5 mm
(0.14")
15 mm
(0.6")
6 mm
(0.2")
SMB46U
• “U” bracket
• 14-gauge 316 stainless steel
• “U” bracket
• 14-gauge 316
stainless steel
65 mm
(2.6")
27 mm
(1.1")
2 mm
(.1")
16 mm
(0.6")
70 mm
(2.8")
54 mm
(2.1")
C
L
8 mm
(0.3") 16 mm
(0.6")
17 mm
(0.7")
34 mm
(1.3")
6 mm
(0.2")
13 mm
(0.5")
5 mm (0.2")
(4x)
ø 36 mm (1.4")
ø 6.5 mm (0.26") (6x)
3.5 mm
(0.14")
15 mm
(0.6")
6 mm
(0.2")
SMB46X3
• Assembly with mounting
block and adjustable
bracket
• Includes:
- 2 mm hex key
- 3/64" hex key 4 set screws
• M12 Laser
emitters
31.8 mm
(1.25")
2x 7.1 mm
(0.28")
2x 11.4 mm
(0.45")
8x M5 or #10 clearance
14.0 mm
(0.55")
60º
60º
ø30.5mm
(1.20")
ø6.6mm
(0.26")
61.0 mm
(2.40")
61 mm to 64 mm
(2.4" to 2.5")
64.5 mm
(2.54")
Mounting Brackets
Model Description Used with: Dimensions
750
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB500
• Universal steel mounting
bracket • SM512
4.8 mm (0.19") x 40° Slot (6 Places)
90°
85.9 mm
(3.38")
50.8 mm
(2.00")
50.8 mm
(2.00")
12.7 mm
(0.50")
22.4 mm
(0.88")
1.9 mm #14 GA
(0.75")
76.2 mm
(3.00")
38.1 mm
(1.50")
38.1 mm
(1.50")
17.5 mm
(0.69")
5.6 mm x 25.4 mm
(0.22" x 1.00")
(2 Places)
19.1 mm
(0.75")
6.4 mm
(0.25")
63.5 mm
(2.50")
SMB55A
• 15° offset bracket
• 12-gauge stainless steel • R55
15.0°
50.8 mm
(2.00")
31.8 mm
(1.25")
8 x R 3.3 mm
(0.13")
12.7 mm
(0.50")
15.2 mm
(0.60")
11.4 mm
(0.45") 13.3 mm
(0.53")
24.1 mm
(0.95")
12 x R 2.6 mm
(0.10")
2.6 mm
(0.10")
2 x 12.4 mm
(0.49")
24.8 mm
(0.98")
27.9 mm
(1.10")
C
L
2 x 5.6 mm
(0.22")
2 x 7.6 mm
(0.30")
5.4 mm
(0.21")
50.8 mm
(2.00")
25.4mm
(1.00")
4 x R 6.4 mm
(0.25")
SMB55F
• Flat mount bracket
• 12-gauge stainless steel • R55
2 x 12.4 mm
(0.49")
24.8 mm
(0.98")
27.9 mm
(1.10")
C
L
2 x 5.6 mm
(0.22")
2 x 7.6 mm
(0.30")
8 x R 3.3 mm
(0.13")
12.7 mm
(0.50")
15.2 mm
(0.60")
11.4 mm
(0.45") 13.3 mm
(0.53")
24.1 mm
(0.95")
12 X R 2.6 mm
(0.10")
5.4 mm
(0.21")
50.8 mm
(2.00")
25.4mm
(1.00")
2.6 mm
(0.10")
82.6 mm
(3.25")
4 x R 6.4 mm
(0.25")
SMB55RA
• 90° offset bracket
• 12-gauge stainless steel • R55
8 x R 3.3 mm
(0.13")
12.7 mm
(0.50")
15.2 mm
(0.60")
11.4 mm
(0.45") 13.3 mm
(0.53")
24.1 mm
(0.95")
2.6 mm
(0.10")
2 x 12.4 mm
(0.49")
27.9 mm
(1.10")
C
L
2 x 5.6 mm
(0.22")
2 x 7.6 mm
(0.30")
12 X R 2.6 mm
(0.10")
5.4 mm
(0.21")
50.8 mm
(2.00")
25.4mm
(1.00")
24.8 mm
(0.98")
4 x R6.4 mm
(0.25")
Mounting Brackets
Model Description Used with: Dimensions
751
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMB55S
• 15° offset bracket
• 12-gauge stainless steel • R55
4x R6.4 mm (0.25")
4x R2.6
(0.10")
28.0 mm
(1.10")
8.2 mm
(0.32")
7.9 mm
(0.31")
3.8 mm
(0.15")
44.5 mm
(1.75")
15.0°
34.3 mm
(1.35")
25.4 mm
(1.00")
2.6 mm
(0.10")
8x R3.3 mm (0.13")
2x 10.2 mm
(0.40")
7.1 mm
(0.28")
8.1 mm
(0.32")
30.5 mm
(1.20")
10.2 mm
(0.40")
SMBF
• Right angle bracket for
glass fiber optics with
5/16" - 24 threaded tip
• 18-gauge stainless steel
• Glass fiber
with 5/16" - 24
tip
19.1 mm
(0.75")
28.6 mm
(1.13")
15.2 mm
(0.60")
14.2 mm
(0.56")
6.4 mm
(0.25")
3.3 mm
(0.13")
4.8 mm
(0.19")
2 x R5 mm
(0.2")
2 x ø4.6 mm (0.18")
8.3 mm
(0.33")
21.6 mm
(0.85")
1.2mm
(0.05")
SMBFP3
• Right angle bracket for
plastic fiber optics with
3 mm threaded tip
• 18-gauge stainless steel
• Plastic fiber
with M3 tip
12.7 mm
(0.50")
3.2 mm
(0.13")
12.7 mm
(0.50")
1.2 mm
(0.05")
4x R2.5 mm
(0.10")
5.8 mm
(0.23")
3.2 mm
(.126")
10.6 mm
(0.65")
6.4 mm
(0.25")
25.4 mm
(1.00") 19.1 mm
(0.75")
3.3 mm
(0.13")
2 x ø 3.3 mm
(0.13")
SMBFP4
• Right angle bracket for
plastic fiber optics with
4 mm threaded tip
• 18-gauge stainless steel
• Plastic fiber
with M4 tip
12.7 mm
(0.50")
3.2 mm
(0.13")
12.7 mm
(0.50")
1.2 mm
(0.05")
4x R2.5 mm
(0.10")
5.8 mm
(0.23")
4.2 mm
(.165")
10.6 mm
(0.65")
6.4 mm
(0.25")
25.4 mm
(1.00") 19.1 mm
(0.75")
3.3 mm
(0.13")
2 x ø 3.3 mm
(0.13")
Mounting Brackets
Model Description Used with: Dimensions
752
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMBFP4N
• Low profile bracket for
plastic fiber optics with
4 mm threaded tip
• 18-gauge stainless steel
• Plastic fiber
with M4 tip
8.9 mm
(0.35")
4.6 mm
(0.35")
5.1 mm
(0.20")
7.6 mm
(0.30")
12.00 mm
(0.47")
1.5 mm
(0.06")
1.2 mm
(0.05")
15.2 mm
(0.60")
90º
25.4 mm
(1.00")
2x Full R
ø4.2 mm
(0.17")
4.6 mm
(0.18")
SMBFP6
• Right angle bracket for
plastic fiber optics with
6 mm threaded tip
• 18-gauge stainless steel
• Plastic fiber
with M6 tip
12.7 mm
(0.50")
3.2 mm
(0.13")
12.7 mm
(0.50")
1.2 mm
(0.05")
4x R2.5 mm
(0.10")
5.8 mm
(0.23")
6.2 mm
(.244")
10.6 mm
(0.65")
6.4 mm
(0.25")
25.4 mm
(1.00") 19.1 mm
(0.75")
3.3 mm
(0.13")
2 x ø 3.3 mm
(0.13")
SMBPVA2
• Set of 4 molded brackets
• Snaps onto standard
28 mm diameter pipe
• 2 required per PVA sensor
• PVA
66 mm
(2.6")
18.0 mm
(0.71")
18.8 mm
(0.74")
34.0 mm
(1.34")
7.4 mm
(0.29") 7.6 mm
(0.30")
20.1 mm
(0.79")
17.0 mm
(0.67")
2 x ø4.4 mm (0.18")
ø4.4 mm (0.18")
SMBPVA5
SMBPVA10
SMBPVA13
SMBPVA16
• Set of 2 heavy-duty
protective brackets for PVA
sensors
• Cold-rolled plated steel
• PVA
L
19.3 mm
(0.76")
35.6 mm
(1.40")
Mounting Brackets
Model Description Used with: Dimensions
Model Used With
SMBPVA5 PVA100
SMBPVA10 PVA225
SMBPVA13 PVA300
SMBPVA16 PVA375
“L”
139.7 mm
268.2 mm
343.3 mm
418.2 mm
753
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMBSP3
• Right angle bracket
• Stainless steel
• SP3
• SP8
18.0 mm
(0.71")
8.3 mm
(0.33")
6.5 mm
(0.26")
7.5 mm
(0.30")
9.9 mm
(0.39")
14.0 mm
(0.55")
7.5 mm
(0.30") 6.5 mm
(0.26")
3.3 mm
(0.13")
4 x M2 x 0.4 4 x ø3.2 mm
(0.126")
1.2 mm
(0.05")
3.1 mm
(0.12")
SMBVS1S
• Short bracket
• 18-gauge stainless steel • VS1
8x R1.6 mm
(0.06")
2x R6.4 mm
(0.25") 0.9 mm
(0.04")
2x 1 mm
(0.04") 2x 7.4 mm
(0.29")
2x 4.6 mm
(0.18")
10.0 mm
(0.40")
4x R4 mm (0.15")
12.5 mm
(0.49")
25.0 mm
(0.98")
22.0 mm
(0.87")
12.0 mm
(0.47")
1.7 mm
(0.7")
6.5 mm
(0.26") 12.5 mm
(0.50")
4x R1.1 mm
(0.44")
2x R5.6 mm
(0.22")
SMBVS1SC
• Short bracket
• 18-gauge stainless steel • VS1
2 x ø2.8 mm (0.11")
10.0 mm
(0.39")
4.7 mm
(0.19")
4.5 mm
(0.18") 3.0 mm
(0.12")
13.5 mm
(0.53") 2.0 mm
(0.08")
5.5 mm
(0.22")
2.3 mm (0.9")
19.5 mm
(0.77")
0.9 mm
(0.04")
9.0 mm
(0.35")
11.0 mm
(0.43")
SMBVS1T
•Tall bracket
•Stainless steel • VS1
0.9 mm
(0.04")
8x R1.6 mm
(0.06")
2x R6.4 mm
(0.25")
2x 7.6 mm
(0.29")
4.6 mm
(0.18")
10.2 mm
(0.40")
12.5 mm
(0.49")
22.0 mm
(0.87")
8x R1.1 mm
(0.44")
25.0 mm
(0.98")
13.5 mm
(0.53")
4x R5.6 mm
(0.22")
13.5 mm
(0.53")
5.6 mm
(0.23")
10.8 mm
(0.43")
32.0 mm
(1.26")
Mounting Brackets
Model Description Used with: Dimensions
754
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – Brackets
SMBVS1TC
•Tall compact bracket
•300 Stainless steel • VS1
3.0 mm
(0.12")
2.3 mm
(0.9")
13.5 mm
(0.53")
3.0 mm
(0.12")
10.0 mm
(0.39")
0.9 mm
(0.04")
9.0 mm
(0.35")
31.0 mm
(1.22")
2x ø2.8mm (0.11)
2.3 mm
(0.09")
5.5 mm
(0.22")
4.5 mm
(0.18")
SMBVS2RA
•Right-angle bracket
•Stainless steel • VS2
5.5 mm
(0.22")
7.0 mm
(0.28")
2x 3.2 mm
(0.13")
0.9 mm
(0.04")
3.0 mm
(0.12")
3.0 mm
(0.12")
14.0 mm
(0.55")
4 x ø2.3 mm
(0.09")
8.0 mm
(0.32")
8.0 mm
(0.32")
8.0 mm
(0.32")
9.0 mm
(0.35")
20.0 mm
(0.79")
20.0 mm
(0.79")
SMH241F
• Nut strap replaces two
M3 mounting nuts and
washers
• 16-gauge stainless steel
• MINI-BEAM
• Q23
• QM42/QMT42
2x M3 x 0.5
2x Full Radius
24.0 mm
(0.95")
6.0 mm
(0.24")
1.5 mm
(0.06")
30.0 mm
(1.18")
Mounting Brackets
Model Description Used with: Dimensions
755
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – BEAM TRACKER™
BT-1 BEAM-TRACKER
•A quick and simple way to evaluate photoelectric system
performance
•Receives light from all modulated photoelectric emitters and
transmits light to receivers to check system operation
•Built-in high frequency emitter that will be detected by any
Banner photoelectric receiver, as well as by those of most other
photoelectric manufacturers
•A valuable tool for locating the center of the beam when
installing long-range opposed mode photoelectric sensor pairs
•Locates sources of severe EMI or RFI “noise”
•Low cost, battery operated, and completely self-contained
Wireless Photoelectric Diagnostics Sensor
Model Number BT-1
Indicators Exclusive, patented Alignment Indicating Device system (AID™, US patent #4356393) which displays the
relative strength of the light which it receives from a modulated source. When the receive button is depressed,
an LED indicates the presence of a modulated light beam and flashes at a rate which corresponds directly to
the beam’s intensity. As a result, a suspected weak or failed light source is easily verified.
Construction Housed in a rugged Cycolac T®case, which includes an aiming sight, plus a convenient mounting hole for a
strap or cord. Totally self-contained.
Application Notes In the receive mode, the BEAM TRACKER will respond to a severe level of electromagnetic or radio
frequency interference. The path of the “noise” source can be traced by observing the flash rate of the
BEAM TRACKER’s Alignment Indicating Device.
Beam BEAM TRACKER emits a 70kHz modulated infrared beam
Most modulated photoelectric receivers, if functioning properly, will respond to this beam at close range.
BT-1 BEAM-TRACKER Features
Alignment Sight
Receiver Lens
Pickup area for
"noise" tracking
Emitter Lens
Hole for cord
or strap
Remove (2) screws
to replace battery
Transmit Mode Button
Depress and hold to check
operation of a photoelectric
receiver
Receiver Mode Button
Depress and hold to:
1. Check operation of emitter
2. Track beam for receiver alignment
3. Track "noise" interference source
LED Indicator (includes
AID™ signal strength
measurement system)
Supply Voltage and Current 9V battery which provides about 10 hours of continuous use (or, typically hundreds of tests)
Cycolac®is a registered trademark of General Electric Co.
BT-1 BEAM TRACKER Specifications
756
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – LAT-1 Laser Alignment Tool
LAT-1 Laser Alignment Tool
• Totally self-contained visible-beam laser tool simplifies the
alignment of any opposed-mode sensor pair
•Uses one common 9-volt battery (included)
•Built-in circular bubble level
•Retroreflective target material included for easy viewing of
the laser spot at long distances
LAT-1 Laser Alignment Tool Dimensions and Features
Sensing Beam Class 2 laser, 640-660 nm visible red IEC
Pulse Width: 7µs
Rep rate: 30µs
Peak output power: 2.8 mW, 33kHz, 25% duty cycle
Beam Size at Aperture Approximately 2 mm (0.08") diameter
Beam Divergence ±1.0 milliradian within specified temperature range
±0.5 milliradians at room temperature
Construction Aluminum housing; black anodized finish
Black polypropylene cover with flexible hinge for battery access
Beam Placement Within ± 4 milliradians (approximately ±0.25 degrees) of parallel to front, back, top and bottom of housing
Environmental Rating NEMA 1; IEC IP50
Operating Conditions Temperature: 0° to +40°C (+32° to 104°F)
Maximum Relative Humidity: 90% @ +50°C (non-condensing)
Laser Classification U.S. Safety Standards 21 CFR 1040.10
European Standards EN 60825-1:1994
Supply Voltage and Current One standard 9V battery, included (replaceable); approximately 20 hours of continuous operation
LAT-1 Laser Alignment Tool Specifications
REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW
DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
AVOID EXPOSURE - LASER LIGHT
EMITTED FROM THIS APERTURE
REQUIRES ONE 9V BATTERY
LASER LIGHT LAT - 1
Peak Power: 2.8 mW, 640-660nm
33kHz 25% duty cycle
COMPLIES WITH 21 CFR PART
1040.10 AND EN60825-1; 1994
ON/OFF Switch
Circular
Bubble
Level
Emitter
Centerline
40 mm
(1.6")
21 mm
(0.8")
75 mm
(3.0")
75 mm
(3.0")
LASER LIGHT
REQUIRES ONE 9V BATTERY
DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW
Peak Power:
COMPLIES WITH 21 CFR PART
1040.10 AND EN60825-1; 1994
2.8mW, 640-660nm
33kHz 25% duty cycle
LAT - 1
AVOID EXPOSURE - LASER LIGHT
EMITTED FROM THIS APERTURE
Visible Laser Device for Aligning Light Screen Systems
757
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – DBQ5 Demo Box
DBQ5 Portable Demo Box
•Used to power dc self-contained photoelectric sensors for
testing purposes
•Designed around the 4-pin euro-style connector
•Powered by three standard 9V batteries (27V dc) for very
long service life
•Features bi-color LEDs which indicate not only sensor output
status, but also output type (NPN or PNP)
•Cable adapters are available to convert to pico-style or mini-
style connectors
•A 4-pin wiring barrier is mounted on the top of the box to
allow connection of cabled dc sensors
DBQ5 114 mm wide x 62 mm deep x 47 mm high (4.5" x 2.4" x 1.9")
Model Dimensions
VALU-BEAM, Q45 series, SM30 dc series OPTO-TOUCH and OMNI-BEAM
sensors
39536 Euro-to-pico D11, D12, Q23, S12, MINI-BEAM2 and PICO-AMP series sensors
Part Number Type Used for:
39537 Euro-to-mini
Cable Adapters
Demo Box
758
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – SPS100 DC Sensor Power Supply
SPS100 DC Sensor Power Supply
•Converts 120V ac line voltage to low voltage dc for powering
any Banner dc sensor†which has either 4- or 5-pin Euro-style
quick-disconnect (QD)
•SPS100 models include 5 amp-rated SPDT relay for switching
ac loads or large dc loads
•SPS100S models include an optically-isolated SPST solid-
state output for switching ac or dc loads
•Models with “Q” suffix require a sensor with a pigtail QD
connector; models with “QP” suffix connect to a sensor with
either an integral or pigtail quick-disconnect
†Note: SPS power supplies are not for use with NAMUR sensors or personal
safety products.
SPS100 Sensor Power Supply Models
SPS100 Sensor Power Supply Dimensions
Model Suffix “QP”Model Suffix “Q”
SPS100Q
105-130V ac
60 Hz
5-pin Euro-style QD*
Model Supply Voltage Sensor Connection
SPS100QP 5-pin Pigtail Euro-style QD 5-pin Mini QD
Supply/Output Cable
SPS100SQP
SPS100SQ 5-pin Euro-style QD*
5-pin Pigtail Euro-style QD 4-pin Mini QD
“Form C” (SPDT) electromechanical relay
(see specifications for rating information)
Output Type
SPST Optically-isolated solid-state switch
(see specifications for rating information)
*Requires 4- or 5-pin Pigtail Euro QD on sensor.
5-pin female Euro-style
QD connector 500 mm (19.7")
pigtail cable
142.5 mm
(5.61")
50.0 mm
(1.97")
ø 38.1 mm (1.50")
Power Indicator
M5 (#10)
Screw Clearance (2)
Mini-Style QD Connector
Threaded Base M30 x 1.5
40.1 mm
(1.58")
48.8 mm
(1.92")
45.0 mm
(1.77")
64.5 mm
(2.54")
4.8 mm
(0.19")
5-pin female Euro-style
QD connector
89.9 mm
(3.54")
14 mm
(0.6")
107.4 mm
(4.23")
132.5 mm
(5.20")
Output Indicator
759
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories – SPS100 DC Sensor Power Supply
NC
C
NO
bu
ye
wh
bn
bk
105-130V ac
bn
bu
bk
wh
105-130V ac
Isolated
Solid State
SPST Switch
SPS100 Sensor Power Supply Specifications
SPS100 Sensor Power Supply Hookups
SPS100 Mechanical Relay SPS100 Solid-State Relay
Quick-Disconnect (QD) Cables
4-Pin Mini
MBCC-406
MBCC-412
MBCC-430
2 m (6.5')
4 m (12')
9 m (30')
Style Model Length Connector
Straight SPS100SQ, SPS100SQP
Following is the selection of cables available for SPS100 models. See the Accessories on page 726 for more information.
Used with:
5-Pin Mini
MBCC-506
MBCC-512
MBCC-530
2 m (6.5')
4 m (12')
9 m (30')
Straight SPS100Q, SPS100QP
Status Indicators
Output Power
Power On (green) and Output On (red)
120mA maximum: 12V dc minimum, 30V dc maximum (dependent on load)
Output Configuration SPS100Q(P) models: “Form C” (SPDT) electromechanical relay
SPS100SQ(P) models: Optically isolated SPST solid-state switch
Output Rating SPS100Q(P) models:
Max. switching power (resistive load) = 150 W, 600 VA
Max. switching voltage (resistive load) = 250V ac or 30 V dc (120V ac max. per UL & CSA)
Max. switching current (resistive load) = 5A
Min.. voltage and current = 1 amp at 5V dc, 0.1 amp at 24V dc
Peak switching voltage = 750V ac (transient suppression recommended)
Mechanical life of relay = 10,000,000 operations
SPS100SQ(P) models:
Max. switching voltage = 250V ac or 250V dc
Max. switching current = 150mA at 25°C, derated to 80 mA at 50°C
On-state saturation voltage = less than 3V at 150 mA; less than 1V at 10 mA
Connections Power connector:
SPS100Q(P) models: 5-pin Mini-style quick disconnect
SPS100SQ(P) models: 4-pin Mini-style quick disconnect
Sensor connector:
“Q” version: 5-pin Euro-style quick-disconnect mounted on housing
“QP” version: PVC jacketed 5-pin pigtail Euro-style quick-disconnect 0.5 meter long
Environmental Rating IEC IP54
Operating Conditions Temperature: -20° to +50°C (-20° to 122°F)
Maximum Relative Humidity: 90% @ +50°C (non-condensing)
Additional Notes Compatible with Banner dc sensors with NPN or PNP output, equipped with 4- or 5-pin Euro-style quick-
disconnect (except NAMUR sensors).
Model SPS100Q: connects only to sensors equipped with a pigtail Euro-style quick-disconnect
Model SPS100QP: connects to sensors equipped with either a pigtail or sensor-mounted Euro-style quick-disconnect
Model SPS100SQ: connects only to sensors equipped with a pigtail Euro-style quick-disconnect
Model SPS100SQP: connects to sensors equipped with either a pigtail or sensor-mounted Euro-style quick-disconnect
Supply Voltage 105V ac to 130V ac, 60Hz
760
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories
NOTES:
761
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories
NOTES:
762
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: 763.544.3164
Accessories
NOTES: