Product Data Sheet DIN 41612 Male 90, type G, Part No. 111-40264 Illustration similar Perpendicular Through Hole Power Rugged Termination length 3 mm 64 contacts premating contact at pos. Z2 & Z32 solder performance level 2 to product on www.ept.de to product group DIN 41612 Version from 16.04.2021, 17:41 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 1 Product Data Sheet DIN 41612 Male 90, type G, Part No. 111-40264 Technical Specifications Basics Specification Performance Level No. of Contacts IEC 60603-2 (DIN 41612) 2 64 Termination Technology solder Termination Length 3 mm Operating Temperature Range -55C to +125C Material Insulator Material Contact Material PC glass filled UL 94 V-2 Copper alloy Mechanical Pitch Mating Force Separating Force per Pin Durability 5.08 x 3.81 mm < 100 N >0.2 N 400 mating cycles Electrical Operational Current 5.6 A Contact Resistance <15 m Clearance and Creepage Insulation Resistance Test Voltage cr: 3.0 mm, cl: 1.6 mm >106 M 1550 V Approval / Compliance UL file Environment E130314 RoHS compliant Version from 16.04.2021, 17:41 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 2 Product Data Sheet DIN 41612 Male 90, type G, Part No. 111-40264 Derating Diagram Version from 16.04.2021, 17:41 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 3 Powered by TCPDF (www.tcpdf.org) Product Data Sheet DIN 41612 Male 90, type G, Part No. 111-40264 Options Board Lock 90 Suitable for connectors with type B, C, D, E, F, G male connectors and R female connectors Type of Insertion Forces PCB Thickness Part Number 111-40264C1 Fm not soldered Fh soldered Fh Locked < 30 N > 10 N > 20 N 1.6 mm Under Tension < 30 N > 7.5 N > 20 N > 1.6 mm Modifications Available on request Pre-mating and late-mating contacts Contact arrangement Performance levels I + III or customer-specific Special contact length Drawings Component data for this product you can request through sales@ept.de Version from 16.04.2021, 17:41 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 4