July 2015
DocID028023 Rev 1
1/4
For further information contact your local STMicroelectronics sales
office
www.st.com
SPC574KADPT144S
SPC574KADPT144S microcontroller premium evaluation board
for SPC574Kx
Data brief
Features
Modular evaluation system for SPC574Kx
Single 12 V external power supply
Four on-board regulators:
5.0 V, 3.3 V and 1.25 V switching
regulators
5 V linear regulator for the ADC
supplies and references
Master power switch and regulator status
LEDs
Two 240-way high-density expansion
connectors for MCU daughter cards
All MCU signals readily accessible at a port-
ordered group of 0.1” pitch headers
RS232/SCI physical interface and standard
DB9 female connector
Two FlexRAY channels interface with a DB9
connector (for both transceivers) and two
alternative connectors
LINFlexD interface with two different style
connectors
Two high speed CAN channels and two
female standard DB9 connectors
One potentiometer for analog voltage input
and four user switches and 4 user LEDs,
freely connectable
Open top MCU socket
Flexible MCU clocking options
40 MHz crystal EVB clock circuit
8 MHz EVB clock oscillator circuit
external clock via SMA connector
User reset switch with reset status LEDs
Debug ports interface:
14-pin standard JTAG connector
34-pin connector for Nexus 2 interface
10-pin SIPI connector for Serial
Interprocessor Interface
Minimodule dimension: 127 mm X 114 mm
Description
The Premium Evaluation Boards System
supports the 32-bit SPC574Kx
STMicroelectronics' automotive microcontrollers.
The complete system consists of a SPC57XXMB
motherboard and a SPC574KADPTx daughter
card which plugs into the motherboard. Different
daughter cards are available for evaluating the
whole family of device in all supported packages.
All daughter cards are similar in design and
concept.
The evaluation system (motherboard and
daughter card) allows full access to the CPU, all
of the CPU's I/O signals, and the motherboard
peripherals (such as CAN, SCI and LIN). The
daughter card itself can be used as a standalone
unit when access to the I/O pins or peripherals is
not needed.
Order codes
2/4
DocID028023 Rev 1
1 Order codes
Table 1: Device summary
Part codes
Device supported
SPC57XXMB
Motherboard for SPC57x, SPC58x family devices
SPC574KADPT144S
Daughter card for SPC574Kx MCU in eTQFP144 package
SPC574KADPT144S
Revision history
DocID028023 Rev 1
3/4
2 Revision history
Table 2: Revision history
Date
Revision
Changes
01-Jul-2015
1
Initial release.
SPC574KADPT144S
4/4
DocID028023 Rev 1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved