SmartPro 230V 750VA 500W Line-Interactive Sine
Wave UPS, Tower, Network Card Options, USB,
DB9 Serial
MODEL NUMBER: SMX750SLT
Description
Tripp Lite's SMX750SLT intelligent, line-interactive sine wave UPS system protects servers, networking
accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges.
Large internal batteries offer 15 minutes half load runtime and 5 minutes full load runtime. 750VA/500 watt
power handling capability and full-time sine wave output offers guaranteed compatibility with networking,
telecom and other sensitive electronic applications. Includes 6 protected C13 output receptacles total.
Network management interfaces support communications via USB, RS-232 and slot for network
management card options. HID-compliant USB interface enables integration with built-in power
management and auto shutdown features of Windows and Mac OS X. Network communications ports
enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert
UPS monitoring software is available via free download. Single line Tel/DSL and network Ethernet line
surge suppression. Built-in audible alarm and 9 LEDs offer status notification for line power, battery
power, battery charge level, load level, plus AVR boost and trim operational status information. Network
grade AC surge suppression protects equipment from damage and performance problems resulting from
transient surges. Attractive, all-black tower housing.
Features
SMX750SLT line-interactive UPS offers battery derived sine wave AC output during power outages,
voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
●
750VA/500 watt power handling capability with full-time sine wave output offers guaranteed
compatibility with networking, telecom and other sensitive electronic devices
●
Large internal batteries offer runtimes of 15 minutes at half load (325VA/250 watts) and 5 minutes at full
load (750VA/500 watts)
●
Highlights
750VA line interactive tower
UPS; Sine wave output
●
220/230/240V nominal output
during brownouts and
overvoltages
●
USB, RS232 and Network
Management Card options
●
Front panel status LEDs with
load level and battery capacity
display
●
C14 input; 6 C13 outlets;
Includes 2 C13 to C14 cables
●
Package Includes
SMX750SLT UPS System
●
USB and serial cabling
●
User manual with warranty
information
●
1 / 5
Specifications
Intelligent battery management system extends battery life
●
Automatic Voltage Regulation (AVR) circuits maintain user-selectable 220, 230 or 240V nominal output
over an input voltage range of 151 to 290
●
Includes 6 C13 output receptacles
●
IEC320-C14 input connection accepts a variety of detachable cordsets
●
Compatible with Tripp Lite UPS management card options WEBCARDLX, RELAYIOCARD,
SNMPWEBCARD
●
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert
●
HID-compliant USB interface enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X
●
Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)
●
9 LEDs offer continuous status information of UPS operating parameters and site power quality
●
Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
●
Single line Tel/DSL and network Ethernet line surge suppression
●
OUTPUT
Output Volt Amp Capacity (VA) 750
Output Watt Capacity (Watts) 500
Power Factor 0.7
Nominal Output Voltage(s)
Supported 220V; 230V; 240V
Nominal Voltage Details 230V default (voltage selection via back panel switches)
Frequency Compatibility 50 / 60 Hz
Output Voltage Regulation (Line
Mode) -11%, +6%
Output Voltage Regulation (Battery
Mode) +/- 5%
Output Receptacles (6) C13
Included Output Power Cables Includes 2 C13 to C14 output power cables
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery
Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 3.6A (220V), 3.5A (230V), 3.4A (240V)
2 / 5
Nominal Input Voltage(s) Supported 220V AC; 230V AC; 240V AC
UPS Input Connection Type C14 inlet
UPS Input Connection Description IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 5 min. (500w)
Half Load Runtime (min.) 15 min. (250w)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included
Batteries) Less than 4 hours to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge RBC24-SLT
Battery Access Battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 290V
Overvoltage Correction Voltage reduction of 12% applies when input is 232-266 (220V), 244-278 (230V), 254-290 (240V)
Undervoltage Correction Voltage boost of 15% applies when input is 175-198 (220V), 182-206 (230V), 190-216 (240V)
Severe Undervoltage Correction Voltage boost of 30% applies when input is 151-174 (220V), 158-181 (230V), 166-190 (240V)
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support
nominal voltage selection
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates power failure and overload conditions
LED Indicators 9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for
load and battery charge level
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 504
UPS AC Suppression Response
Time Instantaneous
UPS Dataline Suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC Noise Suppression Yes
3 / 5
PHYSICAL
Primary Form Factor Tower
UPS Power Module Dimensions
(hwd, in.) 10.25 x 6.75 x 13.25
UPS Power Module Dimensions
(hwd, cm) 26.04 x 17.14 x 33.66
UPS Power Module Weight (lbs.) 34.1
UPS Power Module Weight (kg) 15.47
UPS Shipping Dimensions (hwd /
in.) 14 x 9.75 x 18.5
UPS Shipping Dimensions (hwd /
cm) 35.56 x 24.76 x 46.99
Shipping Weight (lbs.) 38.6
Shipping Weight (kg) 17.5
Cooling Method Fan
UPS Housing Material Steel
Primary UPS Height (mm) 260
Primary UPS Width (mm) 171
Primary UPS Depth (mm) 337
Shipping Height (mm) 356
Shipping Width (mm) 248
Shipping Depth (mm) 470
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 73
Battery Mode BTU / Hr. (Full Load) 350
AC Mode Efficiency Rating (100%
Load) 96%
Operating Elevation (ft.) Up to 10,000 ft
Audible Noise Audible Noise < 50 dBA at Front Side 1 Meter
Operating Elevation (m) Up to 3,000m
COMMUNICATIONS
Communications Interface USB (HID enabled); DB9 Serial; Slot for SNMP/Web interface
4 / 5
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Network Management Cards SNMPWEBCARD; WEBCARDLX; RELAYIOCARD
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
http://www.tripplite.com/poweralert
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time 4-8 milliseconds
Low Voltage Transfer to Battery
Power (Setpoint) 151 (220V), 158 (230V), 166 (240V)
High Voltage Transfer to Battery
Power (Setpoint) 266V (220V), 278V (230V) or 290V (240V)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS
CERTIFICATIONS
UPS Certifications CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia)
UPS Certification Details EN62040-1, EN62040-2
WARRANTY
Product Warranty Period
(International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto
Rico) 2-year limited warranty
5 / 5
