PHOTOCOUPLER PS9552,PS9552L1,PS9552L2,PS9552L3 2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS9552, PS9552L1, PS9552L2 and PS9552L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip. The PS9552 Series is designed specifically for high common mode transient immunity (CMR), high output current and high switching speed. The PS9552 Series is suitable for driving IGBTs and MOS FETs. The PS9552 Series is in a plastic DIP (Dual In-line Package). The PS9552L1 is lead bending type for long creepage distance. The PS9552L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9552L3 is lead bending type (Gull-wing) for surface mounting. FEATURES * Long creepage distance (8 mm MIN.: PS9552L1, PS9552L2) * Large peak output current (2.5 A MAX., 2.0 A MIN.) * High speed switching (tPLH tPHL = 0.5 s MAX.) * UVLO (Under Voltage Lock Out) protection with hysteresis * High common mode transient immunity (CM H, CML = 25 kV/ s MIN.) * Ordering number of tape product: PS9552L2-E3: 1 000 pcs/reel : PS9552L3-E3: 1 000 pcs/reel <R> * Pb-Free product * Safety standards * UL approved: No. E72422 <R> * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved: No. 8937, 8938 * SEMKO approved: No. 615433 * NEMKO approved: No. P06207243 * DEMKO approved: No. 314091 * FIMKO approved: No. FI 22827 <R> * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option) APPLICATIONS * IGBT, Power MOS FET Gate Driver * Industrial inverter * IH (Induction Heating) Document No. PN10589EJ07V0DS (7th edition) Date Published September 2009 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. PS9552,PS9552L1,PS9552L2,PS9552L3 <R> PACKAGE DIMENSIONS (UNIT: mm) DIP Type Lead Bending Type (Gull-wing) For Surface Mount 2 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 Lead Bending Type For Long Creepage Distance Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount) Data Sheet PN10589EJ07V0DS 3 PS9552,PS9552L1,PS9552L2,PS9552L3 PHOTOCOUPLER CONSTRUCTION Parameter PS9552, PS9552L3 PS9552L1, PS9552L2 Air Distance (MIN.) 7 mm 8 mm Outer Creepage Distance (MIN.) 7 mm 8 mm 0.4 mm 0.4 mm Isolation Distance (MIN.) FUNCTIONAL DIAGRAM <R> MARKING EXAMPLE 4 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number*1 Magazine case 50 pcs Standard products PS9552 (UL, CSA, BSI, PS9552L1 PS9552 PS9552-AX Pb-Free PS9552L1 PS9552L1-AX (Ni/Pd/Au) PS9552L2 PS9552L2-AX SEMKO, NEMKO, PS9552L2 PS9552L3 PS9552L3-AX DEMKO, FIMKO PS9552L3 PS9552L2-E3 PS9552L2-E3-AX approved) PS9552L2 PS9552L3-E3 PS9552L3-E3-AX PS9552-V PS9552-V-AX PS9552L1-V PS9552L2-V PS9552L3-V PS9552L3-V-AX PS9552L2-V-E3 PS9552L2-V-E3-AX PS9552L3-V-E3 PS9552L3-V-E3-AX Embossed Tape 1 000 pcs/reel PS9552L3 Magazine case 50 pcs DIN EN60747-5-2 PS9552 PS9552L1-V-AX (VDE0884 Part2) PS9552L1 PS9552L2-V-AX Approved (Option) PS9552L2 PS9552L3 Embossed Tape 1 000 pcs/reel PS9552L2 PS9552L3 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10589EJ07V0DS 5 PS9552,PS9552L1,PS9552L2,PS9552L3 ABSOLUTE MAXIMUM RATINGS (T A = 25 C, unless otherwise specified) Parameter Diode Symbol Forward Current Ratings Unit IF 25 mA IF (TRAN) 1.0 A VR 5 V High Level Peak Output Current *1 IOH (PEAK) 2.5 A Low Level Peak Output Current *1 IOL (PEAK) 2.5 A (VCC - VEE) 0 to 35 V VO 0 to VCC V PC 250 mW BV 5 000 Vr.m.s. PT 300 mW f 50 kHz Operating Ambient Temperature TA 40 to +100 C Storage Temperature Tstg 55 to +125 C Peak Transient Forward Current (Pulse Width < 1 s) Reverse Voltage Detecto r Supply Voltage Output Voltage Power Dissipation Isolation Voltage *2 *3 Total Power Dissipation Operating Frequency *4 *5 *1 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *2 Reduced to 4.8 mW/ C at TA = 70 C or more. *3 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. *4 Reduced to 5.4 mW/ C at TA = 70 C or more. *5 IOH (PEAK) 2.0 A ( 0.3 s), IOL (PEAK) 2.0 A ( 0.3 s) RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Forward Current (ON) Forward Voltage (OFF) Operating Ambient Temperature 6 Symbol MIN. (VCC - VEE) 15 IF (ON) 7 VF (OFF) TA TYP. MAX. Unit 30 V 16 mA 2 0.8 V 40 100 C 10 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 ELECTRICAL CHARACTERISTICS (T A = 40 to +100 C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = 2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Diode <R> Symbol Conditions Forward Voltage VF IF = 10 mA, TA = 25 C Input Capacitance CIN f = 1 MHz, VF = 0 V, TA = 25 C Detector High Level Output Current IOH VO = (VCC 4 V) *2 VO = (VCC 15 V) Low Level Output Current IOL *3 VO = (VEE + 2.5 V) *2 VO = (VEE + 15 V) *3 *4 TYP.*1 MAX. Unit 1.3 1.65 2.1 V 30 pF 2.0 A 2.0 A VCC 3.5 VCC 2.5 VCC 1.5 V 0.5 2.0 0.5 2.0 High Level Output Voltage VOH IO = 100 mA Low Level Output Voltage VOL IO = 100 mA 0.1 0.5 V High Level Supply Current ICCH VO = open, IF = 7 to 16 mA 2.0 5.0 mA Low Level Supply Current ICCL VO = open, VF = 2 to +0.8 V 2.0 5.0 mA 11.0 12.3 13.5 V 9.5 10.7 12.0 UVLO Threshold VUVLO+ VO > 5 V, IF = 10 mA VUVLO UVLO Hysteresis Coupled MIN. Threshold Input Current (L UVLOHYS VO > 5 V, IF = 10 mA IFLH IO = 0 mA, VO > 5 V VFHL IO = 0 mA, VO < 5 V 1.6 2.0 V 5.0 mA H) Threshold Input Voltage (H L) 0.8 V *1 Typical values at TA = 25 C. *2 Maximum pulse width = 50 s, Maximum duty cycle = 0.5%. *3 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *4 VOH is measured with the DC load current in this testing (Maximum pulse width = 2 ms, Maximum duty cycle = 20%). Data Sheet PN10589EJ07V0DS 7 PS9552,PS9552L1,PS9552L2,PS9552L3 SWITCHING CHARACTERISTICS (T A = 40 to +100 C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = 2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Propagation Delay Time (L Propagation Delay Time (H Symbol H) L) tPLH tPHL Pulse Width Distortion (PWD) |tPHL tPLH| Propagation Delay Time (Difference Between Any Two Products) tPHL tPLH Conditions Rg = 10 , Cg = 10 nF, f = 10 kHz, *2 Duty Cycle = 50% , IF = 7 to 16 mA MIN. TYP.*1 MAX. Unit 0.1 0.3 0.5 s 0.1 0.3 0.5 s 0.3 s 0.35 s 0.35 Rise Time tr 0.1 s Fall Time tf 0.1 s UVLO (Turn On Delay) tUVLO ON VO > 5 V, IF = 10 mA 0.8 s UVLO (Turn Off Delay) tUVLO OFF VO < 5 V, IF = 10 mA 0.6 s Common Mode Transient Immunity at High Level Output*3 |CM H| TA = 25 C, IF = 10 to 16 mA, VCC = 30 V, VO (MIN.) = 26 V, VCM = 1.5k V 25 kV// s Common Mode Transient Immunity at Low Level Output*3 |CM L| TA = 25 C, IF = 0 mA, VCC = 30 V, VO (MAX.) = 1 V, VCM = 1.5k V 25 kV// s *1 Typical values at TA = 25 C. *2 This load condition is equivalent to the IGBT load at 1 200 V/75 A. *3 Connect pin 1 and pin 4 to the LED common. 8 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TEST CIRCUIT Data Sheet PN10589EJ07V0DS 9 PS9552,PS9552L1,PS9552L2,PS9552L3 Remark CMR Test : Connect pin 1 and pin 4 to the LED common. 10 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TYPICAL CHARACTERISTICS (T A = 25 C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Data Sheet PN10589EJ07V0DS 11 PS9552,PS9552L1,PS9552L2,PS9552L3 <R> Remark The graphs indicate nominal characteristics. 12 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 Remark The graphs indicate nominal characteristics. Data Sheet PN10589EJ07V0DS 13 PS9552,PS9552L1,PS9552L2,PS9552L3 Remark The graphs indicate nominal characteristics. 14 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TAPING SPECIFICATIONS (UNIT: mm) Data Sheet PN10589EJ07V0DS 15 PS9552,PS9552L1,PS9552L2,PS9552L3 16 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) Data Sheet PN10589EJ07V0DS 17 PS9552,PS9552L1,PS9552L2,PS9552L3 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260 C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220 C 60 seconds or less * Time to preheat temperature from 120 to 180 C 120 30 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120 C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350 C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100 C 18 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. Board designing (1) By-pass capacitor of more than 0.1 F is used between V CC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. (2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not be closed to the LED input. (3) Pins 1, 4 (which is an NC <R> *1 pin) can either be connected directly to the GND pin on the LED side or left open. Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may degrade the internal noise environment of the device. *1 NC: Non-Connection (No Connection) 3. Make sure the rise/fall time of the forward current is 0.5 s or less. 4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/ s or less. 5. Avoid storage at a high temperature and high humidity. Data Sheet PN10589EJ07V0DS 19 PS9552,PS9552L1,PS9552L2,PS9552L3 <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 UIORM, Pd 5 pC UIORM Upr 1 130 1 695 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Upr 2 119 Vpeak Highest permissible overvoltage UTR 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +125 C Operating temperature range TA -40 to +100 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi 175 400 C mA Psi 700 mW Ris MIN. 109 Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi 20 Data Sheet PN10589EJ07V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 Data Sheet PN10589EJ07V0DS 21 PS9552,PS9552L1,PS9552L2,PS9552L3 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.