MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6TG Released Besondere Merkmale * Gehausetyp: weies PLCC-6 Gehause, Kontrasterhohung durch schwarze Oberflache (RGB-Displays) und diffusem Silikon Verguss * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips * Wellenlange: 625 nm (red), 528 nm (true green), 470 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinFilm (rot), ThinGaN (true grun, blau) * optischer Wirkungsgrad: 43 lm/W (rot), 36 lm/W (true grun), 11 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm * ESD-Festigkeit: ESD-sensitives Bauteil Features * package: white PLCC-6 package, higher contrast by a black surface (RGB-Displays) and diffused silicone resin * feature of the device: additive mixture of color stimuli by independent driving of each chip * wavelength: 625 nm (red), 528 nm (true green), 470 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: ThinFilm (red), ThinGaN (true green, blue) * optical efficiency: 43 lm/W (red), 36 lm/W (true green), 11 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 12 mm tape with 1000/reel, o180 mm or 4000/reel, o330 mm * ESD-withstand voltage: ESD sensitive device Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Getrennte Anteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive wei * Vollfarbdisplays bzw. RGB-Displays * Blitzlicht im Handy * Hinterleuchtung (LCD, Schalter, Tasten, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled seperately to display various colors including white * full color displays, RGB-Displays * strobe light for cellular phones * backlighting (LCD, switches, keys, illuminated advertising, general lighting) * coupling into light guides 2012-03-30 1 LRTB G6TG Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 22 Type Color of Emission Luminous Intensity1) page 22 IF = 20 mA IV (mcd) red LRTB G6TG red true green blue true green blue 280 ... 900 900 ...1800 180 ...560 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LRTB G6TG-TU7-1+V7AW-36+ST7-68 Q65111A2479 Anm: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRTB G6TG-TU7-1+V7AW-36+ST7-68 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen T, T5, T7, T9, U, U5 oder U7 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LRTB G6TG-TU7-1+V7AW-36+ST7-68 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, -5 oder -6 enthalten ist (siehe Seite 7 fur nahere Information). Z.B.: LRTB G6TG-TU7-1+V7AW-36+ST7-68 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRTB G6TG-TU7-1+V7AW-36+ST7-68 means that only one group T, T5, T7, T9, U, U5 or U7 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRTB G6TG-TU7-1+V7AW-36+ST7-68 means that only 1 wavelength group -3, -4, -5, or -6 will be shippable (see page 7 for explanation). E.g. LRTB G6TG-TU7-1+V7AW-36+ST7-68 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2012-03-30 2 LRTB G6TG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values red Einheit Unit true green blue Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 125 C IF 70 Stostrom Surge current tp = 10 s, D = 0.005, TS=25C IFM 100 Sperrspannung2) Seite 22 Reverse voltage2) page 22 (TS=25C) VR 12 Durchlassstrom Forward current (TS=25C) 2012-03-30 (min.) (max.) 3 5 50 300 300 5 mA mA V LRTB G6TG Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Symbol Symbol Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange4) Seite 22 Dominant wavelength4) page 22 IF = 20 mA Werte Values Einheit Unit red true green blue (typ.) peak 632 523 465 nm (min.) (typ.) (max.) dom 620 625 629 518.5 528 541.5 463.5 470 476.5 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 18 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung5) Seite 22 Forward voltage5) page 22 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.1 2.4 2.9 3.2 3.7 2.9 3.2 3.7 V V V Sperrstrom Reverse current VR = 5 V (blue / true green); 12 V (red) (typ.) (max.) IR IR 0.02 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.07 0.03 0.02 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 4.7 - 3.6 - 4.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 43 36 11 lm/W 340** 600** 180** 340** 600** 180** 340** 600** 180** K/W K/W K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung3) Seite 22 Junction/ambient3) page 22 Sperrschicht/Lotpad Junction/solder point * ** 1chip on (max.) Rth JA 3 chips on (max.) Rth JA (max.) Rth JS Einzelgruppen siehe Seite 7 Individual groups on page 7 Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-03-30 4 LRTB G6TG Farbortgruppen6) 7) Seite 22 6) 7) page 22 Chromaticity Coordinate Groups 7 OHA02721 0.9 520 530 0.8 540 510 550 0.7 505 3456 true green 0.6 560 570 500 0.5 580 590 600 610 620 630 red 495 0.4 490 0.3 485 0.2 480 8 blue 0.1 0 Gruppe Group 3 4 5 6 7 0 460 0.1 6 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx Cy Gruppe Group Cx Cy 0.112 0.741 6 0.139 0.038 0.150 0.672 0.152 0.057 0.182 0.689 0.147 0.071 0.153 0.757 0.132 0.050 0.137 0.756 0.132 0.050 0.169 0.686 0.147 0.071 0.205 0.692 0.141 0.087 0.181 0.757 0.124 0.065 0.164 0.760 0.130 0.054 0.190 0.693 0.145 0.075 0.230 0.686 0.139 0.097 0.212 0.747 0.121 0.075 0.194 0.752 0.692 0.308 0.216 0.687 0.681 0.309 0.257 0.673 0.695 0.295 0.243 0.733 0.707 0.293 7 8 red Anm.: Die Farbkoordinaten des Mischlichtes konnen innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. Note: The color coordinates of the mixed light can be expected within the marked area of the color triangle 2012-03-30 5 LRTB G6TG Floating Bins red T = 280 ... 450 [mcd] T5 = 315 ... 500 [mcd] T7 = 355 ... 560 [mcd] T9 = 400 ... 630 [mcd] U = 450 ... 710 [mcd] U5 = 502 ... 799 [mcd] U7 = 560 ... 900 [mcd] Floating Bins true green V7 = 900 ... 1400 [mcd] V9 = 1000 ... 1590 [mcd] AW = 1120 ... 1800 [mcd] Floating Bins blue S = 180 ... 280 [mcd] S5 = 201 ... 315 [mcd] S7 = 224 ... 355 [mcd] S9 = 250... 400 [mcd] T = 280 ... 450 [mcd] T5 = 315 ... 500 [mcd] T7 = 355 ... 560 [mcd] 2012-03-30 6 LRTB G6TG Wellenlangengruppen (Dominantwellenlange)4) Seite 22 Wavelength Groups (Dominant Wavelength)4) page 22 Gruppe Group true green Einheit Unit Gruppe Group min. max. 3 518.5 526.5 nm 4 523.5 531.5 5 528.5 6 533.5 blue Einheit Unit min. max. 6 463.5 467.5 nm nm 7 467.5 471.0 nm 536.5 nm 8 468.5 472.5 nm 541.5 nm Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: T-1+V7-3+S-6 Example: T-1+V7-3+S-6 Helligkeitsgruppe Helligkeitsgruppe Wellenlange Helligkeitsgruppe Wellenlange Brightness Group Wellenlange (keine Gruppierung) Wavelength (no grouping) Brightness Group Wavelength Brightness Group Wavelength (red) (red) (true green) (true green) (blue) (blue) 1 V7 3 S 6 T Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2012-03-30 7 LRTB G6TG Relative spektrale Emission6) Seite 22 Relative Spectral Emission6) page 22 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 20 mA OHL02514 100 % I rel 80 V 60 red blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik6) Seite 22 Radiation Characteristic6) page 22 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-03-30 0.8 0.6 0.4 0 20 8 40 60 80 100 120 LRTB G6TG Durchlassstrom6) Seite 22 Forward Current6) page 22 IF = f (VF); TS = 25 C; red Relative Lichtstarke6) 7) Seite 22 Relative Luminous Intensity6) 7) page 22 IV/IV(20 mA) = f (IF); TS = 25 C OHL00573 102 mA OHL02525 101 IV IF I V (20 mA) 5 100 5 10 1 5 blue true green 10 -1 red 5 100 1.7 1.9 2.1 2.3 10-2 10 0 2.5 V 2.7 5 10 1 mA 10 2 IF VF Durchlassstrom6) Seite 22 Forward Current6) page 22 IF = f (VF); TS = 25 C; blue, true green Relative Lichtstarke6) Seite 22 Relative Luminous Intensity6) page 22 IV/IV(25 C) = f (Tj); IF = 20 mA OHL02359 10 2 IV mA IF OHL03513 1.6 I V (25 C) 5 1.4 1.2 10 1 1.0 5 0.8 blue true green red 0.6 10 0 2.5 3 3.5 4 0.4 -40 -20 4.5 V 5 20 40 60 C 100 Tj VF 2012-03-30 0 9 LRTB G6TG Dominante Wellenlange6) Seite 22 Dominant Wavelength6) page 22 blue, dom = f (IF); TS = 25 C 478 nm Dominante Wellenlange6) Seite 22 Dominant Wavelength6) page 22 true green, dom = f (IF); TS = 25 C OHL02481 OHL02527 545 nm dom dom 476 535 474 530 472 525 true green 470 520 468 515 466 464 510 505 0 10 20 30 40 50 60 70 80 mA 100 IF 2012-03-30 0 20 40 60 80 mA 120 IF 10 LRTB G6TG Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 3 chips on OHL01656 80 mA TS 70 60 IF 50 50 40 40 30 30 20 20 0 TA temp. ambient TS temp. solder point 0 20 40 60 0 80 C 100 total maximum power dissipation of all 3chips has to be limited to <400 mW TA temp. ambient TS temp. solder point 0 20 40 60 80 C 100 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 3 chips on OHL01683 60 mA IF TS 50 TA 10 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 1 chip on IF TS 70 60 TA 10 OHL01658 80 mA OHL01684 60 mA TS 50 TA 40 40 TA 30 30 20 total maximum power dissipation of all 3chips 20 has to be limited to <400 mW TA temp. ambient TS temp. solder point 10 TA temp. ambient TS temp. solder point 10 Do not use below 5 mA 0 0 20 40 60 Do not use below 5 mA 0 80 C 100 T 2012-03-30 0 20 40 60 80 C 100 T 11 LRTB G6TG Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 3 chips on OHL01683 60 mA IF TS 50 OHL01684 60 mA TS 50 TA 40 40 TA 30 30 total maximum power dissipation of all 3chips 20 has to be limited to <400 mW 20 TA temp. ambient TS temp. solder point 10 Do not use below 5 mA Do not use below 5 mA 0 0 20 40 60 0 80 C 100 0 20 40 60 80 C 100 T T 2012-03-30 TA temp. ambient TS temp. solder point 10 12 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (1 Chip on) Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (1 Chip on) OHL01709 0.12 IF A OHL01711 0.12 IF A 0.10 0.10 0.2 D= 0.2 0.005 0.01 0.02 0.05 0.1 0.5 0.08 0.08 1 D= 0.06 0.04 0.02 tP 0.02 tP IF D= T T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.12 IF A D= 0.5 0.2 0.005 0.01 0.02 0.05 0.1 0.10 0.08 1 0.06 0.06 0.04 0.04 0.02 tP D= T tP OHL01724 tP D= T tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.02 IF T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2012-03-30 T Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (3 Chips on) OHL01723 0.10 IF tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (3 Chips on) 0.12 IF A tP 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 0.08 1 0.04 tP D= T 0.5 0.06 0.005 0.01 0.02 0.05 0.1 tp 13 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (1 Chip on) 0.35 IF A 0.30 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (1 Chip on) OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (3 Chips on) OHL01734 t D = TP T 0.35 IF A 0.30 D= 0.25 tP IF 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-03-30 OHL01735 tP 14 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (1 Chip on) 0.35 IF A 0.30 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (1 Chip on) OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (3 Chips on) OHL01734 t D = TP 0.35 IF A 0.30 tP IF T 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-03-30 OHL01735 tP 15 LRTB G6TG Mazeichnung8) Seite 22 Package Outlines8) page 22 2 (0.079) 3.5 (0.138) 3.1 (0.122) 2.8 (0.110) 1.6 (0.063) 0...0.15 (0.006) 2.6 (0.102) A1 Package marking C2 C1 C3 A3 A1 C2 A2 0.9 (0.035) 0.4 (0.016) 3.6 (0.142) 3.2 (0.126) 3.2 (0.126) 2.8 (0.110) (2.5 (0.098)) C1 C3 A3 A2 0.6 (0.024) 0.4 (0.016) 0.7 (0.028) 0.5 (0.020) 0.5 (0.020) 0.3 (0.012) 0.7 (0.028) 0.5 (0.020) GPLY6118 C1 Cathode Red (R) A1 Anode Red (R) C2 Cathode True Green (T) A2 Anode True Green (T) C3 Cathode Blue (B) A3 Anode Blue (B) Gewicht / Approx. weight: 40 mg Gurtung / Polaritat und Lage8) Seite 22 Verpackungseinheit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 22 Packing unit 1000/reel, o180 mm or 4000/reel, o330 mm 0.3 (0.012) max. 8 (0.315) 2012-03-30 2...3 3.7 (0.146) 3.5 (0.138) 1.5 (0.059) 2.05 (0.081) 1.75 (0.069) 2 (0.079) 12 (0.472) 4 (0.157) 5.5 (0.217) 1.5 (0.059) 16 A2 C2 A1 A3 C3 C1 OHTY0042 LRTB G6TG Empfohlenes Lotpaddesign8) 9) Seite 22 Recommended Solder Pad8) 9) page 22 Reflow Loten Reflow Soldering 0.8 (0.031) Gehausemarkierung Package marking 0.8 (0.031) Gehausemarkierung Package marking 1.4 (0.055) 4.7 (0.185) A2 C2 A1 A3 C3 C1 16 mm 2 per anode pad for improved heat dissipation 0.35 (0.014) 0.35 (0.014) 0.6 (0.024) Lotstopplack Solder resist OHPY0031 Empfohlenes Platinendesign fur cluster mit 6-lead TOPLED in Serienschaltung Recommended PCB-Design for cluster with 6-lead TOPLED in Series Connection Anode 1 Anode 2 Cathode 2 Anode 3 Cathode 3 Cathode 1 2012-03-30 17 OHPY2398 LRTB G6TG Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat* 25C to 150C 2C / sec 3C / sec Time ts from TSmin to TSmax (150C to 200C 100s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2C / sec 3C / sec ) Liquidus Temperture TL 217C Time tL above TL 80sec max. 100sec Peak Temperature TP 245C max. 260C Time tP within 5C of the specified peak temperature TP - 5K 20sec min. 10sec max. 30sec Ramp-down Rate* TP to 100C 3K / sec 6K / sec maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2012-03-30 18 LRTB G6TG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto LRTBGFTG BIN1: U5-1-0-20 BIN2: V9-5-0-20 6-LEAD MULTILED BIN3: S7-6-0-20 RoHS Compliant Semiconductors (6P) BATCH NO: 1004109518 ML Temp ST 4 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1016 Pack: R33 DEMY 031 B_R999_1011.1241_R (X) PROD NO: 11055131 (Q)QTY: 4000 (G) GROUP: U5-1-0+V9-5-0+S7-6-0 OHA04614 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2012-03-30 19 LRTB G6TG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE Barcode label el see lab e nk, bla cod ve ati y If bar dit mi hu e ed ag . H) (R . RH % /60 C rar ck rel 30 N RS inf pa % ins VE to ak of ITI TO 90 d nta < ns NSUC (pe or TIO d , cte itio an bje ing U g coSEND C nd 5 C su ss CO Ais baRE co ce y 40 be TU MI CThIS C l pro < tor SE _ < urs ). urs Ho de Ho urs co 72 Ho urs te 48 e Ho 24 6 da e tim h tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ale op se for > se , Mo istist ure 3 is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label M Y DE R 18 -1 -1 +Q P RO UP : 4 01 4 D/ C: 20 00 (9 D) NO : 18 R -1 : Q + P -1 G R O U P: u L lt S iT Y O T6 P 7 L 6 D EM Y (X ) PR O D (Q )Q TY : : O TC BA P) (6 T LO (1 T) 5 14 2 110 0 14 4 D /C :0 (9 D ) 0 M RA OS )Q TY :2 00 5 14 2 110 0 (Q A G R 34 ic N O : 998 (X ) PR O D N O : (1 T) LO T N O :1 (6 P) 23 O S BA TC H em 8 2199 2100 H 12 o M n O d u p cto to rs M M S 21 2100 (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR Muster C H 12 34 . RH 0% /6 C _ < s s ur ). Ho ururs s de Ho co 72 Ho ur te 48 e Ho 24 6 da 40 be tim e e C or ThISTU th r pr < ll tim SE ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt Fl oo s ui be on if: read w ed l 4 5 Fl la m ide ce eq lo g, oc ve l vi is in en de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in an in Fl RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi et va to 10 ar ba Jks th s el r Ye m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur e M oi st ur M oi st M oi G L e el selab . , H) nk de co (R bla r S S em R ic AM o n O d u p ct to o H rs NO If 23 G E V E ba ity id m hu e e d tiv re ag NO :1 L la re fra ck 30 Nns IVE RS in pa % k of ai IT TO to 90 ea d ntNS < ns UC or TIO te (p d , g itio ND U g coSE an bjec C sin nd O 5 C su es Ais baRE co IC y M oc (G ) M u L lt S iT Y O T6 P 7 L 6 Muster E Bi D n1 Bi Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2012-03-30 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 20 OHA02044 LRTB G6TG Revision History: 2012-03-30 Previous Version: 2010-03-16 Page Subjects (major changes since last revision) Date of change 1 acc. to OS-PCN-2006-006-A 2006-02-01 9 Relative Luminous Intensity 2006-03-31 4 acc. to OS-PCN-2006-006-A1-B 2006-05-04 9 Diagram Relative Luminous Intensity f (Tj) changed 2007-08-24 2, 6 ordering code changed 2007-10-05 2, 6 ordering code changed 2009-03-18 20 OS-IN-2010-032 2010-10-04 all Final datasheet created 2010-12-02 18 OS-IN-2012-005 2012-03-16 2 Ordering code changed 30-03-2012 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 22 may only be used in life-support devices or systems11) page 22 with the express written approval of OSRAM OS. 2012-03-30 21 LRTB G6TG Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 2) 3) 4) 5) 6) 7) 8) 9) 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 11) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-03-30 22 Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.