3 EPXTM Applicators and Nozzles Technical Bulletin Cartridge Size 3MTM EPXTM Applicators - manual March, 2003 35ml (10:1) 37ml (2:1) 50ml (1:1) 200ml (1:1 and 2:1) 250ml (10:1) 400ml (1:1 and 2:1) EPX Plus Applicator* EPX Metal Applicator EPX Metal Applicator None None (62-9167-9930-7) (62-9740-9935-0) (62-9740-9935-0) EPX 200ml Manual Applicator 10:1 Plunger 2:1 Plunger 1:1 Plunger (62-9136-9930-2) (62-9163-9935-5) (62-9744-9930-0) (62-9741-9935-8) Plunger** (62-9136-9938-5) - pneumatic EPX Plus II Applicator EPX Plus Applicator* EPX Plus Applicator* (62-9170-9930-1) (62-9167-9930-7) (62-9167-9930-7) 10:1 Plunger 2:1 Plunger** 1:1 Plunger** (62-9170-9910-3) (62-9162-9935-7) (62-9161-9935-9) EPX Plus II Applicator EPX Plus II Applicator (62-9170-9930-1) (62-9170-9930-1) None 2:1 Plunger** 1:1 Plunger** (62-9170-9921-0) (62-9170-9911-1) EPX 50ml Pneumatic Applicator*** EPX 50ml Pneumatic Applicator EPX 200ml Pneumatic Applicator EPX 200ml Pneumatic Applicator EPX 400ml Pneumatic Applicator (62-9781-9930-5) (62-9781-9930-5) (62-9140-9930-4) (62-9140-9930-4) (62-9145-9930-3) 10:1 Conversion Kit for EPX 200ml Pneumatic Applicator (62-9174-9932-9) 3MTM EPXTM Nozzles 10:1 Mixing Nozzle for the EPX Plus Applicator EPX Mixing Nozzle for 50ml Applicator EPX Mixing Nozzle for 50ml Applicator (62-9742-9935-6) (62-9742-9935-6) (62-9164-9930-4) EPX Plus II Mixing Nozzle Square Gold EPX Plus II Mixing Nozzle Square Gold (62-9171-9153-8) (62-9171-9153-8) *This applicator will be phased out. The EPX Plus II is the replacement. **Included with the applicator. ***This set-up does take special modification done by 3M. ****This nozzle is recommended for all low viscosity products. EPX 6mm Nozzle for 200ml/400ml Applicators**** 10:1 Mixing Nozzle for the EPX 250ml Applicator EPX 6mm Nozzle for 200ml/400ml Applicators**** (62-9142-9930-0) (62-9165-9930-1) (62-9142-9930-0) EPX 10mm Nozzle for 200ml/400ml Applicators EPX 10mm Nozzle for 200ml/400ml Applicators (62-9143-9930-8) (62-9143-9930-8) Technical Bulletin EPX Applicators and Nozzles TM Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. For Additional Information To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550 or visit www.3M.com/adhesives. Address correspondence to: 3M Industrial Adhesives and Tapes Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our fax number is 651-733-9175. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00. Important Notice 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's application. Limitation of Remedies and Liability If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. ISO 9002 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9002 standards. 3 Industrial Business Industrial Adhesives and Tapes Division 3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106 Recycled Paper 40% pre-consumer 10% post-consumer Printed in U.S.A. (c)3M 2003 78-9236-7078-6 (3/03)