Technical Bulletin March, 2003
3
EPXA pplicators and Nozzles
Cartridge Size 35ml 37ml 50ml 200ml 250ml 400ml
(10:1) (2:1) (1:1) (1:1 and 2:1) (10:1) (1:1 and 2:1)
3M™ EPX™ Applicators EPX Plus EPX Metal EPX Metal EPX 200ml None None
manual Applicator* Applicator Applicator Manual
(62-9167-9930-7) (62-9740-9935-0) (62-9740-9935-0) Applicator
10:1 Plunger 2:1 Plunger 1:1 Plunger (62-9136-9930-2)
(62-9163-9935-5) (62-9744-9930-0) (62-9741-9935-8) Plunger**
(62-9136-9938-5)
EPX Plus II EPX Plus EPX Plus
Applicator Applicator* Applicator*
(62-9170-9930-1) (62-9167-9930-7) (62-9167-9930-7)
`10:1 Plunger 2:1 Plunger** 1:1 Plunger**
(62-9170-9910-3) (62-9162-9935-7) (62-9161-9935-9)
EPX Plus II EPX Plus II
Applicator Applicator
(62-9170-9930-1) (62-9170-9930-1)
2:1 Plunger** 1:1 Plunger**
(62-9170-9921-0) (62-9170-9911-1)
pneumatic None EPX 50ml EPX 50ml EPX 200ml EPX 200ml EPX 400ml
Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
Applicator*** Applicator Applicator Applicator Applicator
(62-9781-9930-5) (62-9781-9930-5) (62-9140-9930-4) (62-9140-9930-4) (62-9145-9930-3)
10:1 Conversion
Kit f or
EPX 200ml
Pneumatic
Applicator
(62-9174-9932-9)
3M™ EPX™ Nozzles 10:1 Mixing EPX Mixing EPX Mixing EPX 6mm 10:1 Mixing EPX 6mm
Nozzle f or the Nozzle f or Nozzle for Nozzle for Nozzle f or the Nozzle for
EPX Plus 50ml Applicator 50ml Applicator 200ml/400ml EPX 250ml 200ml/400ml
Applicator (62-9742-9935-6) (62-9742-9935-6) Applicators**** Applicator Applicators****
(62-9164-9930-4) (62-9142-9930-0) (62-9165-9930-1) (62-9142-9930-0)
EPX Plus II EPX Plus II EPX 10mm EPX 10mm
Mixing Nozzle - Mixing Nozzle - Nozzle f or Nozzle f or
Square Gold Square Gold 200ml/400ml 200ml/400ml
(62-9171-9153-8) (62-9171-9153-8) Applicators Applicators
(62-9143-9930-8) (62-9143-9930-8)
*This applicator will be phased out. The EPX Plus II is the replacement.
**Included with the applicator.
***This set-up does take special modification done by 3M.
****This nozzle is recommended for all low viscosity products.
Tec hnic al Bull etin
EPXTM A pplicators and Nozzles
Printed in U.S .A.
©3M 2003 78-9236-7078-6 (3/03)
Recycled Paper
40% pr e-consumer
10% post-consumer
Refer to Product Label and Material Safety Data Sheet for health and safety inf ormation bef ore using this
product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.
Precautionary
Information
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR TICULAR PURPOSE. User is
responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s
application. Please remember that many factors can affect the use and performance of a 3M product in
a particular application. The materials to be bonded with the product, the surface preparation of those
materials, the product selected for use, the conditions in which the product is used, and the time and
environmental conditions in which the product is expected to perform are among the many factors that
can affect the use and performance of a 3M product. Given the variety of factors that can aff ect the use
and performance of a 3M product, some of which are uniquely within the user’s knowledge and control,
it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose
and suitable for the user’s application.
Important Notice
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/adhesiv es . Address correspondence to: 3M Industrial Adhesives and Tapes Division,
Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our fax number is 651-733-9175. In Canada,
phone: 1-800-364-3577. In Puerto Rico , phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
F or Additional
Information
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE T O
REFUND THE PURCHASE PRICE OF OR T O REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT.
3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence ,
warranty, or strict liability.
Limitation of Remedies
and Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
ISO 9002
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106