E6C2-CWZ1X 200P/R 2M - Omron Automation and Safety

CSM_E6B2-C_DS_E_4_1

Incremental 40-mm-dia. Rotary Encoder

E6B2-C

General-purpose Encoder with

External Diameter of 40 mm

• Incremental model

• External diameter of 40 mm.

• Resolution of up to 2,000 ppr.

Be sure to read Safety Precautions on

page 4.

Ordering Information

Encoders [Refer to Dimensions on page 4.]

Accessories (Order Separately) [Refer to Dimensions on Rotary Encoder Accessories.]

Refer to Accessories for details.

Power supply

voltage

Output configura-

tion Resolution (pulses/rotation) Model

5 to 24 VDC NPN open-collector

output

10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600

E6B2-CWZ6C (resolution) 0.5M

Example: E6B2-CWZ6C 10P/R 0.5M

720, 800, 1,000, 1,024

1,200, 1,500, 1,800, 2,000

12 to 24 VDC PNP open-collector

output

100, 200, 360, 500, 600

E6B2-CWZ5B (resolution) 0.5M

Example: E6B2-CWZ5B 100P/R 0.5M

1,000

2,000

5 to 12 VDC Voltage output

10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600

E6B2-CWZ3E (resolution) 0.5M

Example: E6B2-CWZ3E 10P/R 0.5M

1,000

1,200, 1,500, 1,800, 2,000

5 VDC Line-driver output

10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600

E6B2-CWZ1X (resolution) 0.5M

Example: E6B2-CWZ1X 10P/R 0.5M

1,000, 1,024

1,200, 1,500, 1,800, 2,000

Name Model Remarks

Couplings

E69-C06B Provided with the product.

E69-C68B Different end diameter

E69-C610B Different end diameter

E69-C06M Metal construction

Flanges E69-FBA ---

E69-FBA02 E69-2 Servo Mounting Bracket provided.

Servo Mounting Bracket E69-2 ---

E6B2-C

Ratings and Specifications

*1. An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.

*2. The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is possible with a twisted-pair cable. The quality is

equivalent to AM26LS31.

*3. The maximum electrical response speed is determined by the resolution and maximum response frequency as follows:

This means that the E6B2-C Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical response speed.

Item Model E6B2-CWZ6C E6B2-CWZ5B E6B2-CWZ3E E6B2-CWZ1X

Power supply

voltage

5 VDC −5% to 24 VDC

+15%, ripple (p-p): 5% max.

12 VDC −10% to 24 VDC

+15%, ripple (p-p): 5% max.

5 VDC −5% to 12 VDC

+10%, ripple (p-p): 5% max.

5 VDC ±5%, ripple (p-p):

5% max.

Current

consumption *180 mA max. 100 mA max. 160 mA max.

Resolution

(pulses/rotation)

10, 20, 30, 40, 50, 60, 100,

200, 300, 360, 400, 500, 600,

720, 800, 1,000, 1,024,

1,200, 1,500, 1,800, 2,000

100, 200, 360, 500, 600,

1,000, 2,000

10, 20, 30, 40, 50, 60, 100,

200, 300, 360, 400, 500, 600,

1,000, 1,200, 1,500, 1,800,

2,000

10, 20, 30, 40, 50, 60, 100,

200, 300, 360, 400, 500, 600,

1,000, 1,024, 1,200, 1,500,

1,800, 2,000

Output phases Phases A, B, and Z Phases A, A, B, B, Z, and Z

Phase difference

between outputs 90°±45° between A and B (1/4 T ± 1/8 T)

Output

configuration NPN open-collector output PNP open-collector output Voltage output (NPN output) Line driver output *2

Output capacity

Applied voltage: 30 VDC

max.

Sink current: 35 mA max.

Residual voltage: 0.4 V max.

(at sink current of 35 mA)

Applied voltage: 30 VDC

max.

Source current: 35 mA max.

Residual voltage: 0.4 V max.

(at source current of 35 mA)

Output resistance: 2 kΩ

Sink current: 20 mA max.

Residual voltage: 0.4 V max.

(at sink current of 20 mA)

AM26LS31 equivalent

Output current

High level: IO = −20 mA

Low level: IS = 20 mA

Output voltage:

VO = 2.5 V min.

VS = 0.5 V max.

Maximum

response

frequency *3

100 kHz 50 kHz 100 kHz

Rise and fall times

of output

1 μs max. (Control output

voltage: 5 V, Load resis-

tance: 1 kΩ, Cable length:

2m max.)

1 μs max. (Cable length: 2 m max., Sink current: 10 mA)

0.1 μs max. (Cable length:

2 m max., IO = −20 mA, IS =

20 mA)

Starting torque 0.98 mN·m max.

Moment of inertia 1×10−6 kg·m2 max.; 3 × 10−7 kg·m2 max. at 600 P/R max.

Shaft

load-

ing

Radial 30 N

Thrust 20 N

Maximum

permissible speed 6,000 r/min

Protection circuits Power supply reverse polarity protection, Load short-circuit protection ---

Ambient

temperature range Operating: −10 to 70°C (with no icing), Storage: −25 to 85°C (with no icing)

Ambient humidity

range Operating/Storage: 35% to 85% (with no condensation)

Insulation

resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case

Vibration

resistance Destruction: 10 to 500 Hz, 150 m/s2 or 2-mm double amplitude for 11 min 3 times each in X, Y, and Z directions

Shock resistance Destruction: 1,000m/s2 3 times each in X, Y, and Z directions

Degree of

protection IEC 60529 IP50

Connection

method Pre-wired Models (Standard cable length: 500 mm)

Materials Case: ABS, Main unit: Aluminum, Shaft: SUS420J2

Weight

(packed state) Approx. 100 g

Accessories Coupling, Hexagonal wrench, Instruction manual

Maximum electrical response speed (rpm) = Maximum response frequency × 60

Resolution

E6B2-C

I/O Circuit Diagrams

Note: 1. The shielded cable outer core (shield) is not connected to the inner area or to the case.

2. The phase A, phase B, and phase Z circuits are all identical.

3. Normally, connect GND to 0 V or to an external ground.

Model/Output Circuits Output mode Connection

E6B2-CWZ6C

GND

0 V

5 VDC -5% to

24 VDC +15%

3.3 Ω

35 mA

max. at

30 VDC

max.

NPN

transistor

E6B2

main

circuit

Output signal

(Black: phase A, White:

phase B, Orange: phase

Blue

Brown

Shield

Black, white, orange

OFF

T(360˚)

1/4±1/8T (90˚±45˚) 1/4±1/8T (90˚±45˚)

T(360˚)

Phase A

Phase B

Phase Z

Phase A

Phase B

Phase Z

CW CCW

E6B2-CWZ6C NPN Open-collector Output Model

E6B2-CWZ5B PNP Open-collector Output Model

Direction of rotation: CW

(as viewed from end of shaft)

Direction of rotation: CCW

(as viewed from end of shaft)

Note: Phase A is 1/4 T ± 1/8 T

faster than phase B.

The ONs in the above

timing chart mean that the

output transistor is ON

and the OFFs mean that

the output transistor is

OFF.

Note: Phase A is 1/4 T ± 1/8 T

slower than phase B.

Color Terminal

Brown Power supply

(+Vcc)

Black Output phase

White Output phase

Orange Output phase

Blue 0 V (common)

E6B2-CWZ5B

GND

0 V

3.3 Ω

12 VDC −10% to

24 VDC +15%

35 mA

max.

PNP

transistor

E6B2

main

circuit

(Black: phase A, White: phase B,

Orange: phase Z)

Blue

Brown

Shield

Black, white, orange

Output signal

E6B2-CWZ3E

GND

0 V

3.3 Ω

2 kΩ

5 VDC −5% to

12 VDC +10%

20 mA

max.

NPN

transistor

E6B2

main

circuit

Output signal

(Black: phase A, White: phase

B, Orange: phase Z)

Blue

Brown

Shield

Black, white, orange

E6B2-CWZ3E Voltage Output Model

Direction of rotation: CW

(as viewed from end of shaft)

Direction of rotation: CCW

(as viewed from end of shaft)

Note: Phase A is 1/4 T ± 1/8 T

faster than phase B.

Note: Phase A is 1/4 T ± 1/8 T

slower than phase B.

T(360˚)

1/4±1/8T(90˚±45˚) 1/4±1/8T(90˚±45˚)

T(360˚)

Phase A

Phase B

Phase Z

Phase A

Phase B

Phase Z

CW CCW

E6B2-CWZ1X

GND

0 V

5 VDC ±

(Black/red: Phase A, White/red:

Phase B, Orange/red: Phase Z)

E6B2

main

circuit

AM26

LS31

equivalent

Non-reversed output

(Black: phase A, White: phase B,

Orange: phase Z)

Reversed output

Blue

Brown

Shield

Black, white,

orange

Black, white, orange

(with red stripe)

Phase A

Phase B

Phase Z

Phase A

Phase B

Phase Z

Phase A

Phase B

Phase Z

Phase A

Phase B

Phase Z

T(360˚)

1/4±1/8T (90˚±45˚)

T(360˚)

1/4±1/8T (90˚±45˚)

CW CCW

E6B2-CWZ1X Line Driver Output Model

Direction of rotation: CW

(as viewed from end of shaft)

Direction of rotation: CCW

(as viewed from end of shaft)

Note: Receiver: AM26LS32

equivalent

Color Terminal

Brown Power supply

(+Vcc)

Black Output phase

Black/red

stripes

Output phase

White Output phase

White/red

stripes

Output phase

Orange Output phase

Orange/

red

stripes

Output phase

Blue 0 V (common)

E6B2-C

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

Incorrect wiring may damage internal circuits.

Do not use the Encoder under ambient conditions that exceed the

ratings.

● Mounting

•Origin Indication

It is easy to adjust the position of phase Z with the origin indication

function. The following illustration shows the relationship between

phase Z and the origin. Set cut face D to the phase Z origin as

shown in the illustration.

•Do not extend the length of the cable to more than 2 m. If the cable

must be more than 2 m, use a Model with a Line-driver Output

(max. length: 100 m).

● Wiring

Spurious pulses may be generated when power is turned ON and

OFF. Wait at least 0.1 s after turning ON the power to the Encoder

before using the connected device, and stop using the connected

device at least 0.1 s before turning OFF the power to the Encoder.

Also, turn ON the power to the load only after turning ON the power

to the Encoder.

(Unit: mm)

Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Encoder

Accessories (Order Separately)

WARNING

Precautions for Safe Use

Precautions for Correct Use

30±0.2 dia.

120˚120˚

Phase Z origin

Cut face D

Origin

E6B2-C

39515

-0.021

6 0

-0.012

dia.

20 dia. 1

40 dia.

120˚120˚

30±0.2 dia.

Origin of phase Z Three, M3 holes;

Depth: 7 mm

*E6B2-CWZ6C/5B/3E:

5-dia. vinyl-insulated round cable with 5 conductors

(Conductor cross section: 0.2 mm2, Insulation

diameter: 1.0 mm), Standard length: 0.5 m

E6B2-CWZ1X:

5-dia. vinyl-insulated round cable with 8 conductors

(Conductor cross section: 0.2 mm2, Insulation

diameter: 1.0 mm), Standard length: 0.5 m

Couplings

E69-C06B

E69-C68B

E69-C610B

E69-C06M

Refer to Accessories for details.

Flanges

E69-FBA

E69-FBA02

Servo Mounting Bracket

E69-2

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2010.8

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Omron:

E6B2-CWZ1X 2000P/R 0.5M E6B2-CWZ1X 500P/R 0.5M E6B2-CWZ6C 1000P/R 2M E6B2-CWZ6C 100P/R 0.5M

E6B2-CWZ6C 100P/R 2M E6B2-CWZ6C 2000P/R 0.5M E6B2-CWZ6C 200P/R 2M E6B2-CWZ6C 300P/R 0.5M

E6B2-CWZ6C 360P/R 0.5M E6B2-CWZ6C 360P/R 2M E6B2-CWZ6C 500P/R 2M E6B2-CWZ6C 600P/R 2M E6C2-

CWZ1X 10P/R 2M E6C2-CWZ1X 200P/R 2M E6C2-CWZ1X 300P/R 2M E6C2-CWZ1X 50P/R 2M E6C2-CWZ1X

600P/R 2M E6B2-CWZ6C-10P/R0.5M E6B2-CWZ1X 2000P/R 5M E6B2-CWZ6C 500P/R 0.5M E6B2-CWZ6C 200P/R

0.5M