®Stripes of Quality
2
www.antenna.com
AP-3035
Specifications
Electrical
Frequency Range 30-35 MHz AP-3035*
40-50 MHz AP-4050*
66-88 MHz AP-6688*
VSWR 1.5:1
Power 50 Watts
Impedance 50 ohms
Whip Inductively shortened end-fed, half-wave
Impedance Coupling Unit DC grounded, shunt-fed
Mechanical
Whip Material 17-7 PH stainless steel
Maximum Whip Length AP-3035 at 30 MHz 52 inches (1.3 m)
AP-4050 at 40 MHz 50 inches (1.3 m)
AP-6688 at 66 MHz 50 inches (1.3 m)
Loading Coil 21 AWG solid copper windings on
fiberglass form, polyolifin covered
Plastic Cover ABS plastic
Cable 15 ft (4.6 m), RG-58/U
Mount Triple chrome plated casting
Connector UHF male (PL-259) on cable
Unique patented On-Glass® low band antennas transmit and
receive through glass
Time-Saving DUO-BOND mounting method allows no-hole
installation in minutes with long-lasting holding power . . . removal
and cleanup just as easy
Weatherproof water cannot enter vehicle through gasket failure
or cable channels
Efficient mounts high on the vehicle for maximum
omnidirectional radiation pattern
Convenient whip is easily adjustable to vertical position and
removable for car wash clearance
30/88 MHz
On-Glass® Low Band Mobile Antenna
Requires No Ground Plane
U.S. Patent No. 4,238,799 and other patents pending
Models
AP-3035* AP-4050* AP-6688*
(30-35 MHz) (40-50 MHz) (66-88 MHz)
LOW BAND
Impedance
Coupling
Unit
Coaxial
Cable
180° Angle
Adjustment
Plastic
Cover
Tuning
Screw
See KIT COMPONENT SECTION for reinstallation kit KAV382.
*Available until depleted
