Terminal Blocks General Information Description FUJI can supply a variety of terminal blocks for switchboard or switchgear use. FUJI terminal blocks and end barriers are strongly constructed from a phenol resin and have adequate creepage distance and excellent insulation characteristics. Good connections are assured by convenient screw terminals and solderless box lugs. All terminal blocks are designed to carry their rated amperage without danger of overheating. FUJI terminal blocks are available in a variety of types, some of which are illustrated on this page. AYBN type is simple to assemble and is designed to speed up installation. It is available in up to 12 poles and 600 Amps versions. AYBS type terminal blocks are made from the highest quality phenol resin and resists tracking. Current ratings are available up to 115 Amps and 12 poles. The customer is required to assemble the channel-mounted type himself. The modular construction allows the number of blocks in a channel to be increased or decreased very easily. In addition we can also supply the LT4D type which is provided with an isolating switch, and SKT type power terminal blocks, which are used in motor circuits, power source and similar circuits. Testing terminals type LT5 for CT, VT secondary circuits are also available. SB-232 SB-277 Type AYBN Type AYBN General purpose terminal blocks AF01-220 Type SKT General terminal 600 Voltspurpose 15 to 600 Ampsblocks 600 Volts information: 15 to 600 Amps Further See page 04/228. Further information: See page 04/277. SB-279 Terminal block with pressure solderless box lug type connector on one side and screw type connector on the other. 600 Volts 50 to 200 Amps Further information: See page 04/281. SB-279 Type AYBS High quality terminal blocks 600 Volts 49 to 115 Amps Further information: See page 04/279. Type LT5 Testing terminal and link for VT and CT circuit 250 Volts AC/DC 30 Amps Further information: See page 04/288. Type LT4D Rail mounted terminal blocks with isolating switch 660 Volts 20 Amps Further information: See page 04/280. Wire gauge and square The following table shows the relationship between B.W.G., A.W.G. wire gauge and mm2 cross-sections. In this catalog wire sizes are quoted in mm2. Please use this table for reference. Gauge Square B.W.G. A.W.G. mm2 4/0 4/0 3/0 3/0 2/0 2/0 0 0 1 1 2 3 Type LT2E Rail mounted type terminal blocks 600 volts 22 to 600 Amps Further information: See page 04/283. 2 4 3 5 4 6 5 7 8 6 9 7 10 8 11 107.2 104.2 91.6 85.2 73.2 67.5 58.6 53.5 45.6 42.4 40.9 34.0 33.6 28.7 26.7 24.5 21.2 20.9 16.8 16.4 13.8 13.3 11.1 10.5 9.1 8.3 7.3 Gauge Square B.W.G. A.W.G. mm2 9 12 10 13 11 14 15 16 12 13 14 17 15 16 18 17 19 18 19 20 21 20 21 22 22 23 23 24 24 6.6 6.0 5.3 4.6 4.2 3.5 3.3 2.63 2.14 2.08 1.71 1.65 1.32 1.22 1.03 0.89 0.81 0.66 0.62 0.52 0.41 0.40 0.32 0.32 0.26 0.25 0.20 B.W.G. Birminghan Wire Gauge A.W.G. American Wire Gauge 04/276 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type AYBN General purpose terminal blocks 600 Volts Typical illustration and description Amps No. of poles With spring washer Type Ordering code With turtle-shaped washer Type Ordering code 15 3 4 6 AYBN013-5 AYBN014-5 AYBN016-5 LT1N-0203B LT1N-0204B LT1N-0206B AYBN013-1 AYBN014-1 AYBN016-1 LT1N-0203A LT1N-0204A LT1N-0206A 8 10 12 AYBN018-5 AYBN010-5 AYBN011-5 LT1N-0208B LT1N-0210B LT1N-0212B AYBN018-1 AYBN010-1 AYBN011-1 LT1N-0208A LT1N-0210A LT1N-0212A 3 4 6 AYBN023-5 AYBN024-5 AYBN026-5 LT1N-0503B LT1N-0504B LT1N-0506B AYBN023-1 AYBN024-1 AYBN026-1 LT1N-0503A LT1N-0504A LT1N-0506A 8 10 12 AYBN028-5 AYBN020-5 AYBN021-5 LT1N-0508B LT1N-0510B LT1N-0512B AYBN028-1 AYBN020-1 AYBN021-1 LT1N-0508A LT1N-0510A LT1N-0512A Wire size: Max. 2mm2 Terminal screw: M3.5 AYBN011-1 SB-277 With screw type connectors, marking strip and cover Wire size: Max. 5.5mm2 Terminal screw: M4 25 SB-277 AYBN026-1 With screw type connectors, marking strip and cover Wire size: Max. 14mm2 Terminal screw: M5 40 3 4 AYBN043-5 AYBN044-5 LT1N-1403B LT1N-1404B AYBN043-1 AYBN044-1 LT1N-1403A LT1N-1404A Wire size: Max. 22mm2 Terminal screw: M6 60 3 4 AYBN063-5 AYBN064-5 LT1N-2203B LT1N-2204B AYBN063-1 AYBN064-1 LT1N-2203A LT1N-2204A Wire size: Max. 60mm2 Terminal screw: M8 150 3 4 - - AYBN103-5 *1 AYBN104-5 *1 LT1N-6003B LT1N-6004B Wire size: Max. 100mm2 Terminal screw: M10 200 3 4 - - AYBN203-5 *2 AYBN204-5 *2 LT1N-1X03B LT1N-1X04B Wire size: Max. 200mm2 Terminal screw: M12 400 3 4 - - AYBN403-5 *2 AYBN404-5 *2 LT1N-2X03B LT1N-2X04B Wire size: Max. 325mm2 Terminal screw: M16 600 1 - AYBN601-5 *2 LT1N-3X01B SB-232 AYBN043-1 With screw type connectors, marking strip and cover SB-277 AYBN204-5 With screw type connectors, marking strip and cover SG-292 AYBN601-5 Notes: *1 Cross recessed pan head screw type. *2 Hexagonal bolt Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice 04/277 04 Terminal Blocks Type AYBN Dimensions, mm 15A, 25A Terminal blocks Type No. A of poles 150A, 200A Terminal blocks B C D E F G H Mass No. A of poles B C D E F H L Mass AYBN103-5 AYBN104-5 3 4 85 112 79 79 23 23 27 27 51 51 M8 M8 72 99 6 6 390 510 AYBN203-5 AYBN204-5 3 4 110 145 90 90 29.7 29.7 35 35 63 63 M10 96 M10 131 7 7 740 970 B C D E F G H Mass 45 45 55 55 82 82 M12 M12 9.5 156 1670 9.5 211 2170 (g) AYBN013-1, -5 AYBN014-1, -5 AYBN016-1, -5 3 4 6 45 54 72 37 46 64 6.9 6.9 6.9 9 9 9 28 28 28 M3.5 23.8 32 M3.5 23.8 32 M3.5 23.8 32 20 30 40 AYBN018-1, -5 AYBN010-1, -5 AYBN011-1, -5 8 10 12 90 108 126 82 100 118 6.9 6.9 6.9 9 9 9 28 28 28 M3.5 23.8 32 M3.5 23.8 32 M3.5 23.8 32 50 60 75 AYBN023-1, -5 AYBN024-1, -5 AYBN026-1, -5 3 4 6 11.5 30 11.5 30 11.5 30 M4 M4 M4 26.8 36 26.8 36 26.8 36 35 40 60 AYBN028-1, -5 AYBN020-1, -5 AYBN021-1, -5 8 10 12 11.5 30 11.5 30 11.5 30 M4 M4 M4 26.8 36 80 26.8 36 95 26.8 36 115 52.5 44.5 9.9 64 56 9.9 87 79 9.9 110 133 156 Type 102 125 148 9.9 9.9 9.9 (g) 400A Terminal blocks 40A, 60A Terminal blocks Type No. A of poles AYBN403-5 AYBN404-5 3 4 175 230 (g) 120 120 600A Terminal blocks Type No. A of poles B C D E AYBN043-1, -5 AYBN044-1, -5 3 4 67 83 59 75 12.4 12.4 16 16 AYBN063-1, -5 AYBN064-1, -5 3 4 90 113 78 101 16.9 16.9 20 20 F H L Mass 40 31.8 40 31.8 45 45 4.5 80 4.5 110 52 39 52 39 60 60 6 6 (g) 160 210 Mass: 1040g Ordering information Specify the following: 1. Ordering code or type number 04/278 Technical data Insulation resistance: Over 100M at 500V DC Dielectric strength: 2500V AC rms. 1 minute Ambient temperature: -20 to +40C Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type AYBS High quality terminal blocks 600 Volts Typical illustration and description Volts Amps No. of poles With spring washer Type Ordering code With turtle-shaped washer Type Ordering code 600 49 6 12 AYBS026-5 AYBS021-5 LT1S-0506B LT1S-0512B AYBS026-1 AYBS021-1 LT1S-0506A LT1S-0512A Wire size: Max. 14mm2 Terminal screw: M5 600 88 3 4 12 AYBS043-5 AYBS044-5 AYBS041-5 LT1S-1403B LT1S-1404B LT1S-1412B AYBS043-1 AYBS044-1 AYBS041-1 LT1S-1403A LT1S-1404A LT1S-1412A Wire size: Max. 22mm2 Terminal screw: M6 600 115 3 4 AYBS063-5 AYBS064-5 LT1S-2203B LT1S-2204B AYBS063-1 AYBS064-1 LT1S-2203A LT1S-2204A Wire size: Max. 5.5mm2 Terminal screw: M4 SB-244 AYBS021-1 04 SB-241 AYBS044-1 SB-239 AYBS064-1 Ordering information Specify the following: 1. Ordering code or type number Dimensions, mm Technical data Insulation resistance: Over 100M at 500V DC Dielectric strength: 2500V AC rms 1 minute Ambient temperature: -20 to +40C -20 to +60C (at 70% ratings) Type No. A of poles B AYBS026-1, -5 AYBS021-1, -5 AYBS043-1, -5 AYBS044-1, -5 AYBS041-1, -5 AYBS063-1, -5 AYBS064-1, -5 6 12 3 4 12 3 4 91 40 169 40 60.5 46 76 46 200 46 77 60 98 60 101 179 72 88 212 89 110 C D E F K Mass 10 10 12.5 12.5 12.5 17 17 13 13 15.5 15.5 15.5 21 21 28 28 32 32 32 35.5 35.5 M4 M4 M5 M5 M5 M6 M6 120(110)* 220 110 130 300 190 240 (g) * For AYBS026-5 type Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice 04/279 Terminal Blocks Type LT4D Channel mounted type terminal blocks with isolating switch 660 Volts 20 Amps Wire size: Maximum 5 . 5 m m 2 Terminal screw: M4 These blocks are provided with isolating switches. When opening the control circuit tentatively for testing or inspection purposes please operate the switch knob. If the leads of an ammeter are connected to both ends of the terminal block and then open the switch the ammeter will then be connected in series and this will allow measurement. Warning Do not use this switch for secondary CT circuits. Incorrect operation could be dangerous. Illustration Description Type Minimum quantity per order Terminal block LT4D-020Y 100 pcs section with isolating switch Dimensions, mm * Terminal block section LT4D mass: 50g 55.5 46.0 11 * End barrier LT9D-E1 PULL OFF mass: 5g End barrier LT9D-E1 ON PUSH 50 pcs 51 3 46 End clamp kit LT9E-T2 50 pcs 10 45 * End clamp kit LT9E-T2 LT9E-R1 1 pcs (1m) Marking strip sheet LT9D-M1 1 sheets (900mm) 20 25 Mounting rail 28.7 mass: 12g * Mounting rail LT9E-R1 * Marking strip sheet LT9D-M1 mass: 200g mass: 2g 10 10 10 4.5 900 Ordering information thickness :0.5mm 46 * Assembled LT4D-020Y- 35 Specify the following: 1. Type number 2. Quantity: Specify in minimum quantity or multiples of minimum quantity per order. Examples: minimum quantity per order: 20 pcs. To order, 20 pcs, 40 pcs, 60 pcs, ..., 100 pcs, etc. Should be specified. 4.5 Name plate 1 9.1 Technical data 10 *9.7 Insulation resistance: Over 100M at 500V DC Dielectric strength: 2500V AC rms. 1 minute Ambient temperature: -20 to +60C 9 61.5 11 M L M: Mounting hole pitch L : Full length No. of poles M L No. of poles M L 8 10 12 132 152 172 140 172 180 22 24 30 40 292 312 372 492 300 320 380 500 14 16 18 192 232 252 272 200 240 260 280 50 85 592 992 600 1000 Note: 1 to 85 poles can also be assembled except those listed above. 04/280 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type SKT With transparent cover power terminal blocks 600 Volts 50 to 200 Amps Wire size: 2 to 100 mm2 * Transparent terminal cover allows the wiring configuration to be checked externally. * Slotted hexagon head bolts that can be tightened with screwdrivers or box wrenches are used for the terminals. * The line side and load side are provided with hinged terminal covers to ensure safety and allow easier maintenance and inspections. * cUL approved, file No. E45457 SKT14A-3C to SKT100A-3C only. AF01-220 SKT14A-3C 04 Types and ratings * Terminal blocks Pole Rated insulation voltage (V AC) Rated continuous current (A) 3 600 3 + 1 (Earth terminal) 600 50 100 150 200 50 100 150 200 Wire size (mm2) 2 to 14 2 to 38 14 to 60 30 to 100 2 to 14 2 to 38 14 to 60 30 to 100 Type SKT14A-3C SKT38A-3C SKT60A-3C SKT100A-3C SKT14A-3CG SKT38A-3CG SKT60A-3CG SKT100A-3CG Mass (g) 300 310 450 730 440 450 690 1120 * Connectors Rated voltage (V AC) 600 Rated continuous current (A) 50 100 150 200 Wire size (mm2 ) 2 to 14 2 to 38 14 to 60 30 to 100 Specifications Insulation resistance Withstand voltage Ambient temperature Humidity Flammability Temperature rise Type SKT14-S SKT38-S SKT60-S SKT100-S Mass (g ) 52 55 80 135 Tightening torque 100M or more (500V DC megger) 2500V AC 1minute -20 to +55C 85%RH or less UL94V-2 (Cover), UL94V-0 (Frame) 45K or less (JIS C 2811) Ordering information Specify the following: 1. Type number Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Type SKT14A-3C SKT14A-3CG SKT38A-3C SKT38A-3CG SKT60A-3C SKT60A-3CG SKT100A-3C SKT100A-3CG Recommended tightening Cable pull-out (UL486A) min. force (N) torque (N*m) Line side 5.1-6.5 (M6) 5.1-6.5 (M6) 11.5-15.5 (M8) 23-31 (M10) Load side 11.5-15.5 (M8) 11.5-15.5 (M8) 11.5-15.5 (M8) 23-31 (M10) Min. cable 222 (14AWG) 222 (14AWG) 311 (12AWG) 311 (12AWG) Max. cable 400 (8AWG) 445 (6AWG) 623 (4AWG) 801 (2AWG) 04/281 Terminal Blocks Type SKT Dimensions, mm * Terminal block SKT14A-3C (Without earth terminal) SKT14A-3CG (With earth terminal) 94 25 25 24 SKT38A-3C (Without earth terminal) SKT38A-3CG (With earth terminal) 94 25 25 24 17.5 17.5 M6 M6 2-o4.5 32.5 32.5 80 65 80 65 2-o4.5 M8 29.5 M8 29.5 67 67 60 60 Earth terminal Earth terminal 75 75 SKT60A-3C (Without earth terminal) SKT60A-3CG (With earth terminal) 30 24 115 30 SKT100A-3C (Without earth terminal) SKT100A-3CG (With earth terminal) 135 24 23 35 35 29 M8 M10 2-o6.5 29.5 43 34 115.5 89 90.5 69 2-o5.5 M8 80 67 29.5 79 Earth terminal 95 M10 Earth terminal 90 105 SKT38-S M6 10 8 9 (26) M8 o4.3 (27) M8 9 10 (29) 10.3 15 33.1 27.9 14 (11.8) 10.3 15 (8.4) (8.4) 14 M8 4 4 26.1 33.3 41.6max M8 o5.3 (28) 38.1 50.4 max. o4.3 (27) 57 29 4 8 9 (26) 33.3 43.4max M6 19 17.2 10 17.2 17 SKT60-S 53 26 22.8 53 26 17 11.6 * Connector SKT14-S 17 12 18.8 SKT100-S 71.5 36 2-o4.5 12 7 12 (32) (27.5) 46.2 61.9 max. M10 14.6 27.8 6 25 (o13) 04/282 (13.4) 38.2 6.2 4 M10 20 15 23 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type LT2E Features * Any number of poles can be assembled on a 35mm DIN rail. * A lineup of 10 models supporting screw sizes from M3.5 to M16 and a maximum current of 600A is available. * Our standard models are approved by UL, CSA, and TUV. * The molded material conforms to the UL standard for selfextinguishing materials (UL94V-0). * Mounting is performed by simply pressing the block down onto the rail (except for models LT2E-200 to 600). 04 Specifications Rated thermal current (A) Terminal screw Applicable wire size and maximum current Terminal block End barrier Cover Legend plate End clamp Rail 22 M3.5 1.25mm2-16A 2mm2-22A LT2E-020 LT9E-E1 LT9E-C1 LT9E-M1 LT9E-T1 LT9E-R1 LT9E-R2 30 M4 1.25mm2-16A 2mm2-22A 3.5mm2-30A LT2E-030 LT9E-E2 LT9E -C2 40 M4 3.5mm2-30A 5.5mm2-40A LT2E-040 LT9E-E3 75 M5 5.5mm2-40A 8mm2-50A 14mm2-75A LT2E-080 LT9E-E4 LT9E-C3 95 M6 8mm2-50A 14mm2-75A 22mm2-95A LT2E-090 LT9E-E5 LT9E-C4 160 M8 22mm2-95A 38mm2-130A 60mm2-160A LT2E-150 LT9E-E6 LT9E-C5 200 M10 38mm2-130A 60mm2-160A 100mm2-200A LT2E-200 LT9E-E7 LT9E-C6 (Standard provided) LT9E-C7 300 M10 60mm2-160A 100mm2-240A 150mm2-300A LT2E-300 LT9E-E7 LT9E-C8 (Standard provided) LT9E-C9 400 M12 100mm2-240A 150mm2-310A 200mm2-400A LT2E-400 LT9E-E7 LT9E-C10 (Standard provided) LT9E-C11 600 M16 150mm2-310A 200mm2-400A 325mm2-600A LT2E-600 LT9E-E7 LT9E-C12 (Standard provided) LT9E-C13 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice LT9E-M3 LT9E-T2 (Standard provided) 04/283 Terminal Blocks Type LT2E Performance Material Rated insulation voltage 600V Main body Ambient operating conditions Temperature -25 to 60C (with no icing or condensation) Relative humidity 45% to 85% Conductive plate C2680R (Ni-plated) Terminal screws SWRM (Zn-plated) Temperature rise Temperature rise in conducting metal is less than 35K. Side panel PPE (modified polyphenylene ether resin) (black) UL94V-0 Insulation resistance 200M between charged parts, and between charged parts and the metal mounting plate (Measured at 500V DC megger.) Dielectric strength 2,500V AC (1 min) Applicable standards Conforms to JIS C 2811 PPE (modified polyphenylene ether resin) (black) UL94V-0 Cover PC (translucent polycarbonate resin) UL94V-0 Legend plate PVC (white) Dimensions, mm blocks Terminal 41 LT2E-020 36 Terminal screw M3.5x8 7 3.5min. 6.9max. 10 10.5 32.5 16 8 3.5min. 4.7max. Applicable crimp terminal 41 LT2E-030 39 Terminal screw M4x10 8.6 8.5max. 12 4min. 10 35.5 18 10 6min. 5.7max. Applicable crimp terminal 41 LT2E-040 39 Terminal screw M4x10 9.5 9.5max. 12 4min. 10 35.5 18 11 6min. 5.7max. Applicable crimp terminal Terminal screw M5x12 46 LT2E-080 12.2 12.1max. 14 5min. 10 40 21 14 7.3min. 7.2max. Applicable crimp terminal 04/284 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type LT2E Terminal blocks LT2E-090 64 Terminal screw M6x14 17.2 23 18.5 17.1max. 48.5 6min. 10.5min. 10 9max. 19 LT2E-150 Applicable crimp terminal Terminal screw M8x16 74 30 22.3 22.2max. 04 19.5 51 8min. 12max. 10 12min. 25 LT2E-200 Applicable crimp terminal 86 39 40 29 Terminal screw M10x24 57 29max. 10min. 36 13min. 14max. Applicable crimp terminal (Cover, supplied with a legend plate) LT2E-300 97 47 48 37 Terminal screw M10x25 66 37max. 10min. 41 13.5min. 18max. Applicable crimp terminal (Cover, supplied with a legend plate) LT2E-400 110 58 56 46 Terminal screw M12x30 74 46max. 12min. 46 15min. (Cover, supplied with a legend plate) 22max. Applicable crimp terminal LT2E-600 124 66 63 52 Terminal screw M16x35 51 84 52max. 16min. (Cover, supplied with a legend plate) 18.5min. 25.5max. Applicable crimp terminal Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice 04/285 Terminal Blocks Type LT2E End barriers LT9E-E1 LT9E-E2 Sold in units of 100. LT9E-E5 LT9E-E3 Sold in units of 100. Sold in units of 100. LT9E-E6 Sold in units of 20. LT9E-E4 Sold in units of 50. LT9E-E7 Sold in units of 10. Sold in units of 1. Covers LT9E-C1 LT9E-C2 Length: 1m Sold in units of 20. LT9E-C5 LT9E-C3 Length: 1m Sold in units of 20. LT9E-C6 Standard cover (Standard provided) Length: 1m Sold in units of 20. LT9E-C9 Special cover Length: 1m Sold in units of 20. LT9E-C7 Special cover Sold in units of 1. LT9E-C10 Standard cover Length: 1m Sold in units of 20. LT9E-C8 Standard cover (Standard provided) Sold in units of 1. LT9E-C11 Special cover LT9E-C12 Standard cover (Standard provided) Sold in units of 1. LT9E-C4 Sold in units of 1. LT9E-C13 Special cover (Standard provided) Sold in units of 1. Sold in units of 1. Sold in units of 1. Sold in units of 1. Legend plates LT9E-M1 LT9E-M3 Material: PVC Material: PVC Dimensions (0.5tx10Wx1200L) Sold in units of 50 04/286 Dimensions (0.5tx12Wx900L) Sold in units of 50 Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice Terminal Blocks Type LT2E End clamps LT9E-T2 LT9E-R1 LT9E-R2 B C A LT9E-T1 Mounting rails 35 Material: aluminum A6063 25 45 10 10 45 8.5 38 3.5 12 18 20 25 28.7 30 Type A B C Length Sold in units LT9E-R1 4.5 10 10 1000mm 100 2000mm 50 LT9E-R2 Sold in units of 100. 04 Sold in units of 50. Application to products satisfying international standards Dielectric strength: 2,200V AC for 1 min. Operating temperature range: -25 to 60C Standard LT2E-020 UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV UL CSA TUV LT2E-030 LT2E-040 LT2E-080 LT2E-090 LT2E-150 LT2E-200 LT2E-300 LT2E-400 LT2E-600 E45457 109308-M-001 R9551146 E45457 109308-M-001 R9551147 E45457 109308-M-001 R9551148 E45457 109308-M-001 J9551159 E45457 109308-M-001 J9551160 E45457 109308-M-001 J9551161 E45457 109308-M-001 J9551162 E45457 109308-M-001 J9551163 E45457 109308-M-001 J9551164 E45457 109308-M-001 J9551165 Rated insulation voltage (V) Rated continuous current (A) Applicable wire size for stranded wires (AWG) International standards 600 20 20 22 30 30 30 40 40 40 75 75 75 95 95 95 150 150 160 200 200 200 300 300 300 400 400 400 550 550 600 20-14 20-14 20-14 18-12 18-12 18-12 18-10 18-10 18-10 10-6 10-6 12-6 8-4 8-4 10-4 4-2/0 4-2/0 6-2/0 2-4/0 2-4/0 2-250 2/0-300 2/0-300 1/0-300 4/0-350 4/0-350 3/0-500 300-600 300-600 250-600 UL approved CSA approved TUV approved 600 600 600 600 600 600 660 600 660 600 660 600 660 : Type Note: The values in the above table are for when strandard wires and crimp terminals are used for connection. Use the terminal block together with the crimp terminals and wires approved for the desired standard. Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog Information subject to change without notice 04/287 Testing Terminals Type LT5 Testing terminals for VT, CT circuit - For panel mounting 250 Volts AC or DC, 30 Amps Wire size: Maximum 8 mm 2 These terminals are used in VT and CT secondary circuits. These are used to test protective relays or meters or for carrying out calibration. Ordering information Specify the following: 1. Ordering code or type number 2. Quantity: One pack (10 pcs) is minimum. Technical data Insulation resistance: Over 100M at 500V DC Dielectric strength: 2000V AC rms. 1 minute Ambient temperature: -25 to +50C Illustration Description Etched letters (Standard) Type VT circuit Black U V W O - LT5S-B2 LT5S-B3 LT5S-B4 LT5S-B1 LT5S-B CT circuit Black R S T O - LT5D-B5 LT5D-B6 LT5D-B7 LT5D-B1 LT5D-B Applications VT circuit SDO-0095M V. SB-260 Link, black LT95S-B1 Link, black (small type) LT95S-B2 Q-482 V. SDO-0099M Note: S.R.: H.F.: V.T.: ( ): Series resistor H.V. fuse Voltage transformer Indicates the quantity of terminals or links used at this circuit. Dimensions, mm LT95S - Link Mass: 10g LT95S - B1 LT5S - for VT circuits Mass: 30g CT circuit 20 1 12 9 21 O19 5 O12 31.7 56 40 18 28 50mm or more 50mm or more LT5D - for CT circuits Mass: 50g LT95S - B2 04/288 5 2 47.2 40 18 Note: C.T.: Current transformer ( ): Indicates the quantity of terminals or links used at this circuit. 21 O19 O12 1 20 12 43 31.7 16 Fuji Electric Co., Ltd./D & C Catalog Information subject to change without notice