SURFACE MOUNT DISPLAY APDC56-41SGWA Features ! 0.56 INCH !LOW SUPER BRIGHT GREEN Description DIGIT HEIGHT. The Super Bright Green source color devices are CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. made with Gallium Phosphide Green Light Emitting Diode. !I.C. COMPATIBLE. !MECHANICALLY !GRAY RUGGED. FACE,WHITE SEGMENT. !PACKAGE: 400PCS / REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB3078 APPROVED: J. Lu REV NO: V.3 CHECKED: Joe Lee DATE: APR/14/2003 DRAWN: K.ZHANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e APDC56-41SGWA Iv (u c d ) @ 10 m A L en s Ty p e SUPER BRIGHT GREEN(GaP) WHITE DIFFUSED D es c r i p t i o n Min . Ty p . 3000 13200 Common Cathode, Rt.Hand Decimal Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er peak Peak Wavelength Super Bright Green D Dominate Wavelength 1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 565 nm I F =20mA Super Bright Green 568 nm I F =20mA Spectral Line Half-width Super Bright Green 30 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Super Bright Green 15 VF Forward Voltage Super Bright Green 2.2 IR Reverse Current Super Bright Green Max . Absolute Maximum Ratings at T)=25C P ar am e t e r Su p er B r ig h t Gr een Un it s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB3078 APPROVED: J. Lu REV NO: V.3 CHECKED: Joe Lee DATE: APR/14/2003 DRAWN: K.ZHANG PAGE: 2 OF 4 Super Bright Green SPEC NO: DSAB3078 APPROVED: J. Lu APDC56-41SGWA REV NO: V.3 CHECKED: Joe Lee DATE: APR/14/2003 DRAWN: K.ZHANG PAGE: 3 OF 4 APDC56-41SGWA SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specification (Units : mm) SPEC NO: DSAB3078 APPROVED: J. Lu REV NO: V.3 CHECKED: Joe Lee DATE: APR/14/2003 DRAWN: K.ZHANG PAGE: 4 OF 4