REVISIONS DOC. NO. SPC-FO0S x Effective: 7/8/02 * DCP No! 1398 i BTS, GRE NG SOU BLES ) WITHOUT THE EXPRESS WRITTEN CONSENT OF SPC DCP #) REV DESCRIPTION DRAWN} DATE |CHECKD| DATE |APPRVD DATE TECHNOLOGY. M Ul it icom p 1993 A Released JN | 12730709} JN | 12/30/09] JN | 12/30/09 SPC-F00S.DWG MATERIAL 2-1, Frame 1 Thermoplastic LCP A130 of UL 94V-0 RoHS Compliant 2-2. Impeller I Thermoplastic LCP A130 of UL 94V-0 2-3. Lead Wire ' UL10064, 32 awg, +RED, BLACK UL10064, 32 awg, YELLOW: 3rd Wire ~| 35 LH -_ 12:+0,3 _>| r | . 1240.3 \ 2 10045 UL10064 #32AWG +RED, -: BLACK YELLOW: 3rd Wire 1. One directional exhaust. 2. Best Mounting Direction : Fan blade face up or shaft horizontal direction. 9+0,3 Unitsimm DISCLAIMER: TOLERANCES: DRAWN BY: DATE: DRAWING TITLE: ALL STATEMENTS AND TECHNICAL INFORMATION CONTAINED UNLESS OTHERWISE Jason Nash 12/30/09 DC BRUSHLESS DFAN HEREIN ARE BASED UPON INFORMATION AND/OR TESTS WE BELIEVE TO BE ACCURATE AND RELIABLE. SINCE SPECIFIED, CHECKED BY: DATE! | SIZE] DWG. NO. ELECTRONIC FILE REV CONDITIONS OF USE ARE BEYOND OUR CONTROL, THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT Coe ERENCE Jason Nash 12/30/09| A MC34109 25R6541 A FOR THE INTENDED USE AND ASSUME ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. PURPOSES ONLY. APPROVED BY! DATE! Jason Nash 12/30/09 SCALE: NTS U.O.M: INCHES CmmJ SHEET: 1 OF 4 CHARACTERISTICS 1, Motor Design 2. Insulation Resistance 3. Dielectric Strength 4, Noise Level 3. Input Power, Current & Speed 6, Tolerance 7, Air Performance Single phase, 6 pole Brushless DC motor. More than 20M ohm between Internal stator and lead wiret+) measured at DC 100V. Applied AC S00V for one minute or AC 600V for 2 seconds between housing and lead wire +), Measured in a semi-anechoic chamber with background nolse level below 15 ABCA).The fan Is running In free alr with the microphone oat oa distance of one meter from the fan intake, Measured after continuous 10 minute operation at rated voltage in clean alr, and at ambient temperature of 25 degree C., +15% on roted power and current. Measured ky a double chamber. The values are recorded when the fan speed has stabilized at rated voltage. ALL RIGHTS RESERVED, NO PORTION OF THIS PUBLICATION, WHETHER IN WHOLE OR IN PART CAN BE REPRODUCED WITHOUT THE EXPRESS WRITTEN CONSENT OF SPC TECHNOLOGY. SIZE] DWG. NO. ELECTRONIC FILE REV A MC34109 25R6541 A SPC-F005.DWG DOC, NO, SPC-FOOS * Effective: 7/8/02 DCP Nor 1398 SCALE: NTS U.O.M: Millimeters SHEET: 2 OF 4 PERFORMANCE CURVES STATIC PRESSURE mmHell Pa = 3 30 7 15 15 a 0 0 0 1/min 0 0,0015 0,003 | | | m/min ALL RIGHTS RESERVED, NO PORTION OF THIS PUBLICATION, WHETHER IN WHOLE OR IN PART CAN BE REPRODUCED WITHOUT SIZE) DWG. NO. ELECTRUNIC FILE REV THE EXPRESS WRITTEN CONSENT OF SPC TECHNOLOGY, A MC34109 25R6541 A SPC-F005.DWG DOC, NO, SPC-FOOS * Effective: 7/8/02 DCP Nor 1398 SCALE: NTS U.O.M: Millimeters SHEET: 3 OF 4 SPECIFICATIONS Rated Voltage 2. Operating Voltage Range 3. Starting Voltage 3 VDC 2.0~3.5 VDC 2.0 VDC <25 deg. C POWER ON/OFF) 1-4 Rated Speed 15500 RPM + 30% 1-5. Alr Delivery 2.67 1/min 1-6, Static Pressure 22,96 Pao 1-7, Rated Current 36 mA 1-8, Rated Power 0.4 WATTS 1-9, Nolse Level 15.5 odBCA) @ 1M 26.6 dBCA) @ 0.3M 1-10. Direction of Rotation Counter-clockwise viewed from front of fan blade 1-11. Operating Temperature -10 to +70 deg. C 1-12. Storage Temperature -40 to +70 deg, C 1-13. Bearing System VAPO bearing system 1-14. Weight 0.859 1-15. Locked Rotor Protection Automatic Restart Capacity Note: In a situation where the fan is locked by a external force while the electricity Is on, an Increase in coll temperature will be prevented by temporarily turning off the electrical power to the motor. The fan will automatically restart when the locked rotor condition Is released, ALL RIGHTS RESERVED, NO PORTION OF THIS PUBLICATION, WHETHER IN WHOLE OR IN PART CAN BE REPRODUCED WITHOUT SIZE) DWG. NO. ELECTRUNIC FILE REV THE EXPRESS WRITTEN CONSENT OF SPC TECHNOLOGY, A MC34109 25R6541 A SPC-F005.DWG DOC, NO, SPC-FOOS * Effective: 7/8/02 DCP Nor 1398 SCALE: NTS U.O.M: Millimeters SHEET: 4 OF 4