PANEL SWITCHES 5 -3 SW 11 17 00 3500 series High performance toggle switches * environmentally sealed DISTINCTIVE FEATURES Completely sealed switches withstanding 0.1 bar pressure Approved to European standards CECC 96000 Three types of terminals Many lever styles available ENVIRONMENTAL SPECIFICATIONS * Front sealing to IP67 or IP69K by a silicone membrane (for sealed panel mounting, add washer U60). * Rear sealing to IP64 provided by moulded-in terminal inserts * Operating temperature : -40 C to + 85C (-40 F to +185 F) * Moisture resistance : 56 days ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load and electrical life at full load: see table below * Initial contact resistance : 10 m max. at 1 A 2 VDC * Insulation resistance : 1,000 M * Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and frame FUNCTIONS GENERAL PERFORMANCES ON-OFF and ON-ON 10,000 cycles, T20 C 15 A 28 VDC resistive 15 A 28 VDC inductive 5 A 28 VDC lamp ON OFF ON 10,000 cycles, T20 C 15 A 28 VDC resistive 15 A 28 VDC inductive 5 A 28 VDC lamp OTHER FUNCTIONS 10,000 cycles, T20 C 15 A 28 VDC resistive 10 A 28 VDC inductive 3 A 28 VDC lamp The company reserves the right to change specifications without notice. 1 PANEL SWITCHES 3500 series High performance toggle switches * environmentally sealed GENERAL SPECIFICATIONS TERMINALS * Mechanical life : 40,000 cycles * Torque : 2 Nm (1.47 Ft.lb) max. applied to nut * Panel thickness : For NON-SEALED mounting (panel cut-out fig. 1, 2 or 3) : 5 mm (.196) max. For SEALED mounting (panel cut-out fig. 2) : 4 mm (.157) max. ELECTRICAL FUNCTIONS MATERIALS KEYWAY * Case : mineral filled polyester UL94-V0 * Bushing and cover : zamac * Actuator : brass, nickel or chrome plated, or anodized aluminum * Contacts : silver alloy PANEL CUT-OUT AGENCY APPROVAL CECC 96201-004 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of ordering format. 2 Figure 1 Figure 2 Figure 3 High performance toggle switches * environmentally sealed BUILD YOUR PART NUMBER BASIC PART NUMBER 35 SERIES NUMBER OF POLES ELECTRICAL FUNCTIONS TERMINALS 3 Single pole 1-0 ON - OFF 4-6 MOM 4 Double pole 2-0 ON - m.OFF 5-0 ON - MOM 3-0 OFF - MOM 6-0 ON - ON 4-1 ON 3 ON4 ON 7-0 MOM OFF MOM 4-2 ON 3 ON4 MOM 8-0 ON OFF MOM 4-3 MOM 3 ON4 MOM 9-0 ON OFF ON 4-4 ON 1 ON6 ON 4-5 ON 1 ON6 MOM ON6 1 MOM 0 Screw 2 Solder lug/ quick-connect 3 Normalized quick-connect 4 Screw + clamp Function 4 : double pole only OPTIONS AGENCY APPROVAL LEVER FINISH LOCKING LEVER SPECIAL FINISH N Bright nickel 0 None (blank) B Satin chrome 1 CECC P5 Painted yellow A6 Anodized red G* Black F* Black with fluorescent tip (lever type 1 only) C Painted or anodized None Order with lever finish type C. Other colors : on request. *Black finish on bushing too. LEVER STYLES LEVER LOCKING STYLES 1 Standard, length 17.5 mm (.688) or locking, length 20 mm (.787) 0 No locking 2 Length 30 mm (1.181) A Locked in 3 positions 3 Flatted, length 24 mm (.944) D 4 Length 40 mm (1,574) Locked out of center position 5 Length 50 mm (1.968) G Locked in keyway side 6 Locking, length 25.4 mm (1.000) ACCESSORIES 0 2 hex nuts, 1 locking ring and 1 lockwasher (non-sealed mounting) 2 2 hex nuts and 1 sealing washer (sealed mounting) See drawings on the following pages. ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Switch guards are available to prevent inadvertent lever operation. See "Switch Guards" section of website. Mounting accessories : see above and on the following pages. 3 PANEL SWITCHES 3500 series High performance toggle switches * environmentally sealed ON - MOM 3536-00 22 ON - 3537-00 22 MOM OFF MOM 3538-00 30 ON OFF MOM 3539-00 30 ON OFF ON ON 10.00 10.00 (.393) (.393) 22 A1 MOM 3535-00 31.40 (1.236) A2 m.OFF - 11.40 (.449) A3 - OFF 17.50 (.689) 15.00 (.59) III ON 22 - I A1-A2 OFF II A 22 3533-00 II I 3532-00 III A2-A3 ON 32.00 (1.26) 3531-00 Angle of throw (A) 22 O11.90 32NS (15/32 32NS) KEYWAY MOM ON* MOM 3545-00 22 ON - MOM 3546-00 22 ON - ON 3547-00 22 MOM OFF MOM 3548-00 30 ON OFF MOM 3549-00 30 ON OFF ON 11.00 (.433) 10.00 (.393) 22 10.00 (.393) 3544-30 A2 MOM A1 ON* III ON 31.40 (1.236) II 22 A ON 3544-20 11.40 (.449) I ON* B4 ON B5 22 17.50 (.689) B6 3544-10 23.00 (.905) A1 22 A3 I A1-A2 B5-B4 OFF 3541-00 * A2 II A3-B5 ** A1-B5 - III A2-A3 B5-B6 ON Angle of throw (A) A3 SCREW TERMINALS DOUBLE POLE Shown with standard lever KEYWAY 32.00 (1.26) SCREW TERMINALS SINGLE POLE O11.90 32NS (15/32 32NS) Also available in functions ON-m.OFF and OFF-MOM. S KEYWAY SOLDER LUG/QUICK-CONNECT TERMINALS SINGLE POLE OFF ON - m.OFF 3533-02 22 OFF - MOM 3535-02 22 ON - MOM 3536-02 22 ON - 3537-02 22 MOM OFF MOM 3538-02 30 ON OFF MOM 3539-02 30 ON OFF ON ON SOLDER LUG/QUICK-CONNECT TERMINALS DOUBLE POLE II Angle of III 4 *A3-B5 **A1-B5 - O11.90 32NS (15/32 32NS) KEYWAY I A1-A2 B5-B4 OFF 3541-02 22 A2-A3 B5-B6 ON 3544-12 22 ON ON* ON 3544-22 22 ON ON* MOM 3544-32 22 MOM ON* MOM 3545-02 22 ON - MOM 3546-02 22 ON - ON 3547-02 22 MOM OFF MOM 3548-02 30 ON OFF MOM 3549-02 30 ON OFF ON throw (A) 10.80 (.425) 31.40 (1.236) A1 - 22 11.40 (.449) A3 ON 3532-02 17.50 (.689) 15.00 (.59) A2 I A1-A2 III II II A III A2-A3 I 3531-02 Angle of throw (A) 22 C 22 32.00 (1.26) PANEL SWITCHES 3500 series Also available in functions ON-m.OFF and OFF-MOM. *and** : A2-B4 and A2-B6 = jumper to be wired by the user. High performance toggle switches * environmentally sealed 3531-03 Angle of throw (A) 22 3532-03 22 ON - m.OFF 3533-03 22 OFF - MOM 3535-03 22 ON - MOM 3536-03 22 ON - 3537-03 22 MOM OFF MOM 3538-03 30 ON OFF MOM 3539-03 30 ON OFF ON III A2-A3 ON II - I A1-A2 OFF ON KEYWAY NORMALIZED QUICK-CONNECT TERMINALS DOUBLE POLE II Angle of III *A3-B5 **A1-B5 - I A1-A2 B5-B4 OFF 3541-03 22 A2-A3 B5-B6 ON 3544-13 22 ON ON* ON 3544-23 22 ON * ON MOM 3544-33 22 MOM ON* MOM 3545-03 22 ON - MOM 3546-03 22 ON - 3547-03 22 MOM throw (A) Shown with standard lever KEYWAY NORMALIZED QUICK-CONNECT TERMINALS SINGLE POLE ON OFF MOM 3548-03 30 ON OFF MOM 3549-03 30 ON OFF ON Also available in functions ON-m.OFF and OFF-MOM. *and** : A2-B4 and A2-B6 = jumper to be wired by the user. LEVER STYLES BASIC P/N O7.00 (.275DIA) O7.00 (.275DIA) O11.00 (.433DIA) 1 C35LL1N/A Standard 2C35LL2N/A 3 C35LL3N/A 25.40 (1.000) 30.00 (1.1811) 25.00 (.984) 24.00 (.944) 30.00 (1.181) 15.00 (.59) O7.00 (.236DIA) 20.00 (.787) 17.50 (.688) O6.00 (.236DIA) O10.50 (.413DIA) 20.00 (.787) O6.00 (.236DIA) 4 C35LL4N/A 5 C35LL5N/A 6 C35LL6N 5 PANEL SWITCHES 3500 series High performance toggle switches * environmentally sealed LEVER FINISH BASIC P/N N B G* F* C * Black finish on bushing too. Bright nickel Satin chrome Black Black with fluorescent tip (available with lever type 1 only) Painted or anodized (for locking lever only) LOCKING LEVER STYLES BASIC P/N 0 A D G No locking Locked in 3 positions. For functions 4-1, 4-4 and 9-0. Locked out of center position. For functions 1-0 and 6-0. Locked in keyway. For functions 1-0 and 6-0. 20.00 (.787) PANEL SWITCHES 3500 series A D G AGENCY APPROVAL BASIC P/N C35DTV 0 1 None CECC MOUNTING ACCESSORIES BASIC P/N 0 For NON-SEALED mounting (panel cut-out fig. 1, 2 or 3) 2 hex nuts 14 mm (.551) across flats, 1 locking ring U121 or U12, 1 lockwasher U13 Panel thickness : 5 mm (.196) max. 2 For SEALED mounting (panel cut-out fig. 2) 2 hex nuts 14 mm (.551) across flats and 1 sealing washer U60 Panel thickness : 4 mm (.157) max. Special hardware : black cap nut U129. Order separately. See "Hardware" section of website. LOCKING LEVER SPECIAL FINISH BASIC P/N (blank) None P5 Painted yellow A6 Anodized red 6 Order with lever finish type C. Other colors on request. C35DTV C35DTV