6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd FEATURES Single channel NC 1 * Choice of CMR performance of 15 kV/s, 5 kV/s, and 1000 V/s * High speed: 10 MBd typical * +5 V CMOS compatibility * Pure tin leads * Guaranteed AC and DC performance over temperature * Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements * Low input current capability of 5 mA * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 8 V CC A 2 7 V E C 3 6 VO NC 4 5 GND 6N137, VO2601, VO2611 Dual channel A1 1 8 VCC C1 2 7 V O1 C2 3 6 V O2 4 A2 APPLICATIONS 5 GND * * * * * * * * * VO2630, VO2631, VO4661 DESCRIPTION The 6N137, VO2601, and VO2611 are single channel 10 MBd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. The VO2630, VO2631, and VO4661 are dual channel 10 MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO2601 and VO2631 and 15 kV/s for the VO2611 and VO4661. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended. Microprocessor system interface PLC, ATE input / output isolation Computer peripheral interface Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS High speed A/D and D/A conversion AC plasma display panel level shifting Multiplexed data transmission Digital control power supply Ground loop elimination, noise isolation AGENCY APPROVALS * * * * * UL1577 cUL DIN EN 60747-5-5 (VDE 0884-5) available with option 1 BS EN 60950-1 CQC GB8898-2011, GB4943.1-2011 ORDERING INFORMATION V O 2 6 0 1 PART NUMBER - X 0 # PACKAGE OPTION # DIP-8 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 > 0.7 mm AGENCY CERTIFIED/PACKAGE BSI, UL, cUL DIP-8 DIP-8, 400 mil (option 6) SMD-8 (option 7) SMD-8 (option 9) VDE, BSI, UL, cUL DIP-8, 400 mil (option 6) SMD-8 (option 7) Rev. 2.0, 27-Sep-16 1000 6N137 6N137-X006 6N137-X007T 6N137-X009T 1000 - Option 9 > 0.1 mm CHANNELS 1 CHANNELS 2 CMR (V/s) CMR (V/s) 5000 15 000 1000 5000 15 000 VO2601 VO2611 VO2630 VO2631 VO4661 VO2601-X006 VO2611-X006 VO2630-X006 VO2631-X006 VO4661-X006 VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T VO2630-X009T 5000 15 000 1000 5000 15 000 VO2601-X016 VO2611-X016 VO2631-X016 VO2601-X017T VO2611-X017T VO2631-X017T - Document Number: 84732 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors TRUTH TABLE (positive logic) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER CONDITIONS SYMBOL VALUE UNIT Average forward current (single channel) IF 20 mA Average forward current (per channel for dual channel) IF 15 mA Reverse input voltage VR 5 V Enable input voltage VE VCC + 0.5 V V INPUT Enable input current IE 5 mA IFSM 200 mA Output power dissipation (single channel) Pdiss 35 mW Output power dissipation (per channel for dual channel) Pdiss 25 mW Surge current t = 100 s OUTPUT Supply voltage 1 min maximum Output current Output voltage VCC 7 V IO 50 mA VO 7 V Output power dissipation (single channel) Pdiss 85 mW Output power dissipation (per channel for dual channel) Pdiss 60 mW Storage temperature Tstg -55 to +150 C Operating temperature Tamb -40 to +100 C 260 C 260 C COUPLER Lead solder temperature Solder reflow temperature for 10 s Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. Rev. 2.0, 27-Sep-16 Document Number: 84732 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors 100 30 Output IF - Forward Current (mA) Ptot - Total Power Dissipation (mW) www.vishay.com 80 60 40 Input 20 0 25 20 15 10 5 0 0 25 50 75 100 125 0 50 75 100 125 Fig. 3 - Forward Current vs. Ambient Temperature (single channel) Fig. 1 - Total Power Dissipation vs. Ambient Temperature (single channel) 100 30 IF - Forward Current (mA) Ptot - Total Power Dissipation (mW) 25 Tamb - Ambient Temperature (C) Tamb - Ambient Temperature (C) 80 Output 60 40 Input 20 0 25 20 15 10 5 0 0 25 50 75 100 125 0 25 50 75 100 125 Tamb - Ambient Temperature (C) Tamb - Ambient Temperature (C) Fig. 4 - Forward Current vs. Ambient Temperature (dual channel) Fig. 2 - Total Power Dissipation vs. Ambient Temperature (dual channel) RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. MAX. UNIT Operating temperature TEST CONDITION Tamb -40 100 C Supply voltage VCC 4.5 5.5 V Input current low level IFL 0 250 A Input current high level IFH 5 15 mA V Logic high enable voltage VEH 2 VCC Logic low enable voltage VEL 0 0.8 V Output pull up resistor RL 330 4K N - 5 - Fanout Rev. 2.0, 27-Sep-16 RL = 1 k Document Number: 84732 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. IF = 10 mA VF VR = 5 V IR f = 1 MHz, VF = 0 V UNIT 1.1 1.4 1.7 V - 0.01 10 A CI - 55 - pF VE = 0.5 V, IF = 0 mA ICCH - 4.1 7 mA VE = VCC, IF = 0 mA ICCH - 3.3 6 mA IF = 0 mA ICCH - 6.5 12 mA VE = 0.5 V, IF = 10 mA ICCL - 4 7 mA VE = VCC, IF = 10 mA ICCL - 3.3 6 mA Low level supply current (dual channel) IF = 10 mA ICCL - 6.5 12 mA High level output current VE = 2 V, VCC = 5.5 V, IF = 250 A IOH - 0.002 1 A Low level output voltage VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VOL - 0.2 0.6 V Input threshold current VE = 2 V, VCC = 5.5 V, IOL (sinking) = 13 mA ITH - 2.4 5 mA High level enable current VE = 2 V IEH - -0.6 -1.6 mA Low level enable current VE = 0.5 V IEL - -0.8 -1.6 mA High level enable voltage VEH 2 - - V Low level enable voltage VEL - - 0.8 V INPUT Input forward voltage Reverse current Input capacitance OUTPUT High level supply current (single channel) High level supply current (dual channel) Low level supply current (single channel) Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION Propagation delay time to high output level RL = 350 , CL = 15 pF Propagation delay time to low output level RL = 350 , CL = 15 pF Pulse width disortion Propagation delay skew SYMBOL MIN. TYP. MAX. tPLH 20 48 75 (1) UNIT ns tPLH - - 100 ns tPHL 25 50 75 (1) ns tPHL - - 100 ns RL = 350 , CL = 15 pF |tPHL - tPLH| - 2.9 35 ns RL = 350 , CL = 15 pF tPSK - 8 40 ns Output rise time (10 % to 90 %) RL = 350 , CL = 15 pF tr - 23 - ns Output fall time (90 % to 10 %) RL = 350 , CL = 15 pF tf - 7 - ns Propagation delay time of enable from VEH to VEL RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V tELH - 12 - ns Propagation delay time of enable from VEL to VEH RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V tEHL - 11 - ns Notes * Over recommended temperature (Tamb = -40 C to +100 C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 C, VCC = 5 V. (1) 75 ns applies to the 6N137 only, a JEDEC(R) registered specification Rev. 2.0, 27-Sep-16 Document Number: 84732 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors VCC Single channel Pulse gen. Zo = 50 t f = t r = 5 ns 1 IF 2 Input IF monitoring node RM VCC 8 VE 7 VOUT 3 4 RL 0.1 F bypass Output VO monitoring node 6 5 GND IF = 7.5 mA IF = 3.75 mA 0 mA Input IF VOH 1.5 V VOL Output VO C L = 15 pF t PHL The probe and Jig capacitances are included in C L t PLH 18964-2 Fig. 5 - Single Channel Test Circuit for tPLH, tPHL, tr and tf Pulse gen. Z0 = 50 tf = tr = 5 ns VCC Dual channel IF Input monitoring node RM 1 VCC 8 2 7 3 6 4 5 GND RL 0.1 F bypass Output VO monitoring node CL= 15 pF 18963-5 Fig. 6 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf Input VE monitoring node Pulse gen. Zo = 50 t f = t r = 5 ns 1 7.5 mA IF VCC Single channel 2 VCC 8 VE 7 VOUT 3 4 6 GND RL 0.1 F bypass Output VO monitoring node Input VE CL = 15 pF Output VO 3V 1.5 V tEHL tELH 1.5 V 5 The probe and Jig capacitances are included in CL 18975-2 Fig. 7 - Single Channel Test Circuit for tEHL, and tELH Rev. 2.0, 27-Sep-16 Document Number: 84732 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 C, unless otherwise specified) PARAMETER Common mode transient immunity TEST CONDITION SYMBOL MIN. |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (1) TYP. MAX. UNIT |CMH| 1000 |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (2) |CMH| 5000 10 000 V/s |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (3) |CMH| 15 000 25 000 V/s |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (1) |CML| 1000 |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (2) |CML| 5000 10 000 V/s |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (3) |CML| 15 000 25 000 V/s V/s V/s Notes (1) For 6N137 and VO2630 (2) For VO2601 and VO2631 (3) For VO2611 and VO4661 VCC IF Single channel VCC 8 VE 7 1 B A VFF 2 VOUT 3 6 4 5 GND RL 0.1 F bypass VCM (peak) VCM 0 V Output VO monitoring node Switch AT A: IF = 0 mA VO 5 V VO 0.5 V VO (min.) Switch AT A: IF = 7.5 mA VO (max.) VCM + Pulse generator ZO = 50 CMH CML 18976-2 Fig. 8 - Single Channel Test Circuit for Common Mode Transient Immunity IF Dual channel B 1 VCC 8 2 7 3 6 A VFF 4 18977-1 GND VCC RL 0.1 F bypass Output VO monitoring node 5 VCM + Pulse generator Z O = 50 Fig. 9 - Dual Channel Test Circuit for Common Mode Transient Immunity Rev. 2.0, 27-Sep-16 Document Number: 84732 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index VALUE UNIT 55 / 100 / 21 2 Insulation group IIIa CTI 175 Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 5300 Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak Tamb = 25 C, VIO = 500 V RIO 1012 Tamb = 100 C, VIO = 500 V RIO 1011 PSO 500 mW Input safety current ISI 300 mA Input safety temperature TS 175 C 7 mm Isolation resistance Output safety power Creepage distance DIP-8 Clearance distance Creepage distance DIP-8, 400 mil (option 6) Clearance distance Creepage distance SMD-8 (option 7) Clearance distance Creepage distance SMD-8 (option 9) Clearance distance Insulation thickness DTI VRMS 7 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 0.4 mm Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.60 1.55 1.6 VF - Forward Voltage (V) VF - Forward Voltage (V) 1.7 1.5 IF = 20 mA 1.4 1.3 1.2 IF = 10 mA IF = 1 mA 1.1 1.0 -40 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 -20 0 20 40 60 80 0 100 Tamb - Ambient Temperature (C) Fig. 10 - Forward Voltage vs. Ambient Temperature Rev. 2.0, 27-Sep-16 1.50 17611 5 10 15 20 25 30 35 40 45 50 IF - Forward Current (mA) Fig. 11 - Forward Voltage vs. Forward Current Document Number: 84732 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com 7 5 4 VR = 5 V 3 2 1 0 -40 17613-1 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) ICCI - Low Level Supply Current (mA) Fig. 12 - Reverse Current vs. Ambient Temperature 4.0 3.5 3.0 2.5 VCC = 7 V IF = 10 mA VCC = 5 V IF = 10 mA 2.0 1.5 1.0 0.5 0.0 -40 17614 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) VCC = 7 V IF = 0.25 mA 3.3 VCC = 5 V IF = 0.25 mA 3.1 3.0 2.9 2.8 -40 17615 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 14 - High Level Supply Current vs. Ambient Temperature Rev. 2.0, 27-Sep-16 2.6 RL = 350 2.5 2.4 RL = 1 k 2.3 RL = 4 k 2.2 2.1 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 15 - Input Threshold On Current vs. Ambient Temperature 2.6 2.5 2.4 RL = 350 2.3 2.2 RL = 1 k 2.1 RL = 4 k 2.0 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 16 - Input Threshold Off Current vs. Ambient Temperature VOL - Low Level Output Voltage (V) ICCH - High Level Supply Current (mA) 3.5 3.2 2.7 17617 Fig. 13 - Low Level Supply Current vs. Ambient Temperature 3.4 2.8 17616 ITH - Input Threshold Off Current (A) IR - Reverse Current (nA) 6 ITH - Input Threshold On Current (A) Vishay Semiconductors 0.30 0.25 VCC = 5.5 V IF = 5 mA IL = 16 mA IL = 13 mA 0.20 0.15 IL = 10 mA 0.10 IL = 6 mA 0.05 0.00 -40 17618 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 17 - Low Level Output Voltage vs. Ambient Temperature Document Number: 84732 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors 60 tP - Propagation Delay Time (ns) IOL - Low Level Output Current (mA) www.vishay.com IF = 5 mA IF = 10 mA 50 40 30 20 10 0 -40 -20 0 20 40 60 80 45 40 35 30 25 20 15 10 5 0 20 40 60 80 Vo - Output Voltage (V) 5.0 4.5 4.0 3.5 3.0 2.5 RL = 350 RL = 1 k 1.0 RL = 4 k 0.5 0.0 0 17621 1 2 3 4 IF - Forward Input Current (mA) tPHL, 1 k tPHL, 4 k 0 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) 120 tPLH, 4 k 100 80 tPLH, 1 k tPLH, 350 60 40 tPHL, 350 tPHL, 1 k 20 tPHL, 4 k 0 7 9 11 13 15 IF - Forward Current (mA) Fig. 22 - Propagation Delay vs. Forward Current 50 RL = 4 k 40 30 20 RL = 1 k 10 5 Fig. 20 - Output Voltage vs. Forward Input Current Rev. 2.0, 27-Sep-16 tPHL, 350 20 5 PWD - Pulse Width Distortion (ns) 5.5 1.5 40 17623 Fig. 19 - High Level Output Current vs. Ambient Temperature 2.0 60 100 Tamb - Ambient Temperature (C) 17620 tPLH, 1 k tPLH, 350 Fig. 21 - Propagation Delay vs. Ambient Temperature tP - Propagation Delay Time (ns) IOH - High Level Output Current (nA) 50 -20 80 17622 Fig. 18 - Low Level Output Current vs. Ambient Temperature 0 -40 tPLH, 4 k 100 100 Tamb - Ambient Temperature (C) 17619 120 17624 0 -40 RL = 350 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 23 - Pulse Width Distortion vs. Ambient Temperature Document Number: 84732 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors 60 300 50 RL = 4 k 40 30 RL = 1 k 20 10 RL = 350 0 9 7 5 11 13 tr, RL = 4 k 250 200 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k tr, RL = 1 k 50 0 -40 17626 tr, RL = 350 -20 0 20 40 60 80 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k 100 tr, RL = 1 k 50 tr, RL = 350 7 5 9 11 13 15 IF - Forward Current (mA) Fig. 26 - Rise and Fall Time vs. Forward Current 60 50 tELH = 4 k 40 tELH = 350 tEHL = 350 30 20 tELH = 1 k 10 100 Tamb - Ambient Temperature (C) Fig. 25 - Rise and Fall Time vs. Ambient Temperature Rev. 2.0, 27-Sep-16 150 0 tE - Enable Propagation Delay (ns) tr, f - Rise and Fall Time (ns) 300 100 200 17627 Fig. 24 - Pulse Width Distortion vs. Forward Current 150 tr, RL = 4 k 250 15 IF - Forward Current (mA) 17625 tr, f - Rise and Fall Time (ns) PWD - Pulse Width Distortion (ns) www.vishay.com 17628 tEHL = 1 k 0 -40 -20 0 tEHL = 4 k 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 27 - Enable Propagation Delay vs. Ambient Temperature Document Number: 84732 10 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) DIP-8 0.70 0.20 6.00 0.25 3.55 0.20 6.70 0.15 1.27 0.10 0.50 0.10 2.54 nom. .10 0.25 0 7 typ. 3 x 2.54 = 7.62 8 7 6 5 1 2 3 4 3.10 0.25 7.62 typ. 10.16 max. 9.75 0.15 0.95 0.20 PIN ONE I.D. DIP-8, 400 mil (option 6) 10.16 typ. 7.62 typ. 10.16 max. 9.75 0.15 0.95 0.20 0.1 min. 3.55 0.20 6.70 0.15 1.27 0.10 0.50 0.10 10.55 0.40 2.54 nom. 0.25 0.10 3 x 2.54 = 7.62 8 7 6 5 1 2 3 4 PIN ONE I.D. Rev. 2.0, 27-Sep-16 Document Number: 84732 11 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors SMD-8 (option 7) 10.05 0.25 10.16 max. 7.62 typ. 9.75 0.15 6.70 0.15 0.70 0.20 1.27 0.10 2.54 nom. 3 x 2.54 = 7.62 0.25 0.10 3.55 0.20 0.95 0.20 8.00 min. 8.40 min. 0.75 0.25 Leads coplanarity 0.10 max. Recommended Footprint 8 7 6 5 0.76 PIN ONE I.D. 1 2 3 2.54 4 R0.250 1.78 8.00 min. 11.05 1.52 SMD-8 (option 9) 9.78 0.25 7.62 typ. 10.16 max. 9.75 0.15 0.95 0.20 0.18 0.08 3.55 0.20 0.25 0.10 6.70 0.15 1.27 0.10 2.54 nom. 3 x 2.54 = 7.62 0.75 0.20 8.00 min. Leads coplanarity 0.10 max. Recommended Footprint 8 7 6 5 0.76 PIN ONE I.D. 1 2 3 4 2.54 R0.250 1.78 8.00 min. 11.05 Rev. 2.0, 27-Sep-16 1.52 Document Number: 84732 12 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors PACKAGE MARKING VO2611 V YWW 68 Fig. 28 - Example of VO2611-X017T Notes * VDE logo is only marked on option 1 parts. * Tape and reel suffix (T) is not part of the package marking. PACKING INFORMATION (in millimeters) Tube 528 0.2 330 0.5 260 0.5 200 0.5 150 0.5 125 0.5 - 1.0 30 0.5 B VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC Detail B Detail A A - 1.0 - 1.0 3 0.5 - 1.0 380 1 0.7 0.5 1.0 14 x 13 x 10 = 130 17996-3 Fig. 29 - Shipping Tube Specifications for DIP-8 Packages DEVICES PER TUBS TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-8 50 40 2000 DIP-8 12 0.3 B 6.6 0.3 Transparent rigid PVC 1 2.7 0.2 R 0. 6 4.4 0.3 0. 5 11 0.3 R 0.6 0.1 10 A // 0.2 B Detail A Detail B 5.7 0.15 17996-4 Section A - B Not to scale Fig. 30 - Tube Shipping Medium Rev. 2.0, 27-Sep-16 Document Number: 84732 13 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors DIP-8, 400 mil (option 6) 0.5 13.6 5.7 9 With stopper pins tolerance: 0.5 length: 575 5 4.3 15.3 15912 Fig. 31 - Tube Shipping Medium Tape and Reel ESD sticker Tape slot in core 330 (13") Top cover tape Regular, special or bar code label Embossed carrier Embossment 17999 17998 Fig. 32 - Tape and Reel Shipping Medium Fig. 33 - Tape and Reel Shipping Medium SMD-8 (option 7) Pin 1 and top of component 0.35 (0.014) 4 0.1 (1.57 0.004) 2 0.05 (0.079 0.002) 1.5 (0.059) min. 10 pitch cumulative tolerance on tape 0.2 (0.008) 1.75 0.1 (0.069 0.004) Top cover tape 10.41 (0.410) 7.5 0.05 16.0 0.3 (0.295 0.002) (0.630 0.012) 4.7 (0.185) 10.21 (0.402) 13.3 (0.523) 12.0 (0.472) 0.1 (0.004) max. Embossment Center lines of cavity 18008 1.5 (0.059) Direction of feed Fig. 34 - Tape and Reel Packing (1000 pieces on Reel) Rev. 2.0, 27-Sep-16 Document Number: 84732 14 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors SMD-8 (option 9) 4 0.1 (1.57 0.004) 2 0.05 (0.079 0.002) 1.5 (0.059) min. Pin 1 and top of component 10 pitch cumulative tolerance on tape 0.2 (0.008) 0.35 (0.014) 1.75 0.1 (0.069 0.004) Top cover tape 10.2 (0.402) 7.5 0.05 16.0 0.3 (0.295 0.002) (0.630 0.012) 4.17 (0.164) 10.31 (0.406) 13.3 (0.523) 12.0 (0.472) 0.1 (0.004) max. Embossment 18009 Center lines of cavity 1.5 (0.059) Direction of feed Fig. 35 - Tape and Reel Shipping Medium SOLDER PROFILES 300 300 5s Lead temperature ca. 2 K/s 2 K/s 50 full line: typical dotted line: process limits second wave Temperature (C) Temperature (C) 235 C to 260 C first wave 200 wave ca. 200 K/s 150 100 C to 130 C 100 200 max. 30 s 150 max. ramp down 6 C/s 50 0 50 94 8626 100 max. 100 s max. 120 s 100 ca. 5 K/s forced cooling 0 max. 260 C 245 C 255 C 240 C 217 C 250 250 max. ramp up 3 C/s 0 150 200 250 Time (s) Fig. 36 - Wave Soldering Double Wave Profile According to J-STD-020 for DIP Devices 0 19841 50 100 150 200 250 300 Time (s) Fig. 37 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for SMD Devices HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Floor life: unlimited Conditions: Tamb < 30 C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 Rev. 2.0, 27-Sep-16 Document Number: 84732 15 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 6N137 VO2601 VO2611 VO2630 VO2631 VO4661 VO2601-X006 VO2601-X007T VO2601-X017T VO2611X006 VO2611-X007T VO2630-X006 VO2630-X007T VO2631-X006 VO2631-X007T VO2631-X017T VO4661-X006 VO4661-X007T 6N137-X006 6N137-X007T VO2601-X016 VO2611-X016 6N137-X009T VO2611-X017T VO2630X009T VO2631-X016