SENTRON
Miniature Circuit Breakers
siemens.com/lowvoltage
Configu-
ration
Manual
Edition
10/2015
© Siemens AG 2016
© Siemens AG 2016
Siemens · 10/2015
For further technical
product information:
Siemens Industry Online Support:
www.siemens.com/lowvoltage/product-
support ,
→
Entry type:
Application example
Certificate
Characteristic
Download
FAQ
Manual
Product note
Software archive
Technical data
2Introduction
45SL miniature circuit breakers
65SY and 5SP miniature circuit
breakers
95SJ6. . .-.KS miniature circuit
breakers, with plug-in terminals
10 5SY miniature circuit breakers,
1+N in 1 MW
12 Additional components
Busbars
17 5ST standard busbars
21 5ST3 busbars acc. to UL 508
23 5ST2 distribution blocks
26 SIKclip wiring system
28 Configuration and dimensioning
29 Characteristic curves
43 Selectivity
96 Back-up protection
107 Direct current, universal current
109 5SJ4...-.HG miniature circuit breakers
acc. to UL 489 and IEC,
and accessories
112 Characteristic curves
115 Dimensional drawings
119 SHU 5SP3 main miniature circuit
breakers
121 Configuration
125 Characteristic curves
127 Dimensional drawings
129 Circuit breaker terminals
Miniature Circuit Breakers
PH_03.book Seite 1 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
2Siemens · 10/2015
Introduction
Miniature Circuit Breakers
■
Overview
Devices Page Application Standards Used in
Non-residential
buildings
Residential
buildings
Industry
5SL miniature circuit breakers 4For all applications from 0.3 A to 63 A in
the tripping characteristics B, C and D
with rated breaking capacities of
4500 A, 6000 A and 10000 A acc. to
EN 60898-1.
EN 60898-1 ✓ ✓ --
5SY and 5SP miniature circuit
breakers
6For all applications from 0.3 A to 125 A
with rated breaking capacities 10000 A
and 15000 A acc. to EN 60898-1.
Applications for universal current from
0.3 A to 63 A, 25 kA version,
acc. to EN 60947-2.
EN 60898-1/-2
EN 60947-2
UL 1077
CSA 22.2
GB 10963.1/.2
-- ✓ ✓
5SJ6...-.KS miniature circuit breakers
with plug-in terminals
9For socket outlet and lighting circuits in
all building installations.
The plug-in terminals offer easy front
connection for manual insertion of
conductors, which considerably
reduces mounting times.
EN 60898-1 ✓ ✓ --
5SY miniature circuit breakers,
1+N in 1 MW
10 For socket outlet and lighting circuits in
all building installations where a
switchable neutral conductor is
required.
The miniature circuit breaker 1+N saves
space in the distribution board.
EN 60898-1 ✓ ✓ ✓
Additional components 12 Auxiliary switches, fault signal contacts,
shunt trips, undervoltage releases for
higher system availability, RC units for
personal safety and remote controlled
mechanisms for remote switching.
✓-- ✓
Busbars 17 Busbars in 10 mm² and 16 mm² save
space in the distribution board and time
during mounting. Busbars in 18 mm
2
and 25 mm
2
versions acc. to UL 508
and CSA.
UL 508 ✓ ✓ ✓
Configuration and dimensioning 28 Notes for configuration, dimensioning
and extended technical specifications.
5SJ4...-.HG miniature circuit
breakers acc. to UL 489 and IEC,
and accessories
109 Miniature circuit breakers can be used
as "branch circuit protection" and are
approved for the connection type "same
polarity" and "opposite polarity" in the
characteristics B, C and D
acc. to UL489, from 0.3 to 63 A.
UL 489 ✓ ✓ ✓
10
20
40
2
1
4
10
20
40
6
60
120
Tripping time
Minutes
1.451.13
PH_03.book Seite 2 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
3
Siemens · 10/2015
Miniature Circuit Breakers
Introduction
Devices Page Application Standards Used in
Non-residential
buildings
Residential
buildings
Industry
SHU 5SP3 main miniature circuit
breakers
119 Voltage-independent selective main
miniature circuit breakers (SHU) in the
precounter area support downstream
miniature circuit breakers by providing
better current limitation.
DIN VDE 0641-21 ✓ ✓ --
Circuit breaker terminals 129 Circuit breaker terminals are used for
short-circuit protection or for protection
against overload and short circuits in
auxiliary and control circuits
downstream of control transformers.
-- -- ✓
PH_03.book Seite 3 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
4Siemens · 10/2015
5SL miniature circuit breakers
Miniature Circuit Breakers
■
Overview
The 5SL miniature circuit breakers are intended for use up to
6 kA/10 kA. These devices have system features that are
characteristic of all Siemens miniature circuit breakers.
They are also suitable for the quick and easy mounting of
additional components, such as auxiliary switches and fault
signal contacts. The 5SL4 miniature circuit breakers can also be
combined with shunt trips, undervoltage releases and arc fault
detection devices.
To facilitate cable entry, the devices are equipped with
rectangular terminals for the accommodation of pin busbars with
cables up to 35 mm2. The rated current range is between 0.3 A
and 63 A. The 5SL miniature circuit breakers are available in
characteristics B, C and D.
■
Technical specifications
1)
The operational voltage 60 V DC/pole takes into account a battery charging voltage with a peak value of 72 V.
2)
Except: Characteristic C: 0.3 ... 1A, characteristic D: 0.3 ... 2A
5SL3 5SL6 5SL4
Standards EN 60898-1
Approvals www.siemens.com/lowvoltage/certificates
Tripping characteristic B, C B, C, D
Rated voltage U
n
V AC 230/400
Operational voltage
• Min. V AC/DC
per pole
24
•Max. V AC 250/440
V DC/pole 60
1)
60
1)2)
Rated making and breaking capacity
•I
cn
acc. to IEC/EN 60898-1 kA AC 4.5 610
•I
cu
acc. to IEC/EN 60947-2 kA AC 4.5 610
Insulation coordination
• Rated insulation voltage V AC 250/440
• Pollution degree for overvoltage category 2/III
Rated frequency Hz 50/60
Touch protection Acc. to EN 50274 Yes
Handle end position, sealable Yes
Degree of protection IP20 with connected conductors,
IP40 in the area of the handle with distribution cover
CFC and silicone-free Yes
Conductor cross-sections
• 1-wire
- Solid (≤ 10 mm
2
) / stranded (≥ 16 mm
2
)mm
2
0.75 ... 35
- Finely stranded with non-insulated end sleeve mm
2
0.75 ... 25
- Finely stranded with insulated end sleeve mm
2
0.75 ... 25
- Finely stranded without end sleeve mm
2
1 ... 35
• 2-wire, same cross-section, same conductor type
- Solid (≤ 10 mm
2
) / stranded (≥ 16 mm
2
)mm
2
0.75 ... 10
- Finely stranded with non-insulated end sleeve mm
2
0.75 ... 4
- Finely stranded with insulated end sleeve mm
2
0.75 ... 4
- Finely stranded without end sleeve mm
2
1 ... 4
• 1-wire + busbar (pin thickness 1.5 mm)
- Solid (≤ 10 mm
2
) / stranded (≥ 16 mm
2
)mm
2
10 ... 25
- Finely stranded with non-insulated end
sleeve
mm
2
6 ... 25
- Finely stranded with insulated end sleeve mm
2
6 ... 16
Terminals ± screw (Pozidriv) 2
• Terminal tightening torque Nm 2.5 ... 3
Mounting position Any
Service life, on average, with rated load 20000 actuations
Storage temperature °C -40 ... +75
Ambient temperature °C -25 ...+45, occasionally +55, max. 95 % humidity -25 ... +55, max. 95 %
humidity
Resistance to climate Acc. to IEC 60068-2-30 6 cycles
PH_03.book Seite 4 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
5
Siemens · 10/2015
Miniature Circuit Breakers
5SL miniature circuit breakers
■
Dimensional drawings
■
Circuit diagrams
Graphical symbols
5SL3, 5SL4, 5SL6
1P 1P+N 2P 3P 3P+N 4P
I202_02133
45
90
44
70
6727254363618
1
2
5
6
1
2
N
N
1
2
3
4
1
2
3
4
1
2
3
4
5
6
N
N
1
2
3
4
5
6
7
8
5SL3, 5SL4, 5SL6
1P 1P+N 2P 3P 3P+N 4P
1
2
2
1
N
N
1
2
3
4
2
1
4
3
6
5
N
N
6
5
4
3
2
1
8
7
6
5
4
3
2
1
PH_03.book Seite 5 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
6Siemens · 10/2015
5SY and 5SP miniature circuit breakers
Miniature Circuit Breakers
■
Overview
MCBs are used to protect systems and installations in buildings
and for industrial applications.
Used in industrial applications and plant engineering, miniature
circuit breakers can be supplemented with additional
components, such as auxiliary switches, fault signal contacts,
shunt trips, undervoltage releases, remote controlled
mechanisms, RC units, and arc fault detection devices.
The devices are approved for worldwide use according to
IEC standards for power supply systems up to 250/440 V AC.
72 V DC per pole is permitted in DC systems.
For North America, there is an additional approval according to
UL 1077 for use as "supplementary protectors" in systems up to
480/277 V AC. For use in ship building, the devices also have
numerous certifications according to shipping classifications;
BV, DNV, GL and LRS. Information on this can be found in the
Internet: www.siemens.com/lowvoltage/certificates
■
Technical specifications
1)
For detailed information, see page 28.
2)
Ensure compliance with the specified polarity when connecting DC.
3)
5SY5 4.. 4-pole, degree of pollution 2 at overvoltage category II.
4)
Except: C/D 0.3 A ... 0.5 A
5)
5SY54.. 4-pole 880 V is not a standardized voltage acc. to EN 60898-1,
suitable for max. 1000 V DC, if the four poles are connected in series.
5SY6 5SY4 5SY5 5SY7 5SY8 5SP4
Standards EN 60898-1 EN 60898-1 EN 60898-2 EN 60898-1 EN 60947-2 EN 60898-1
Approvals www.siemens.com/lowvoltage/certificates
Rated voltage U
n
V AC 230/400 230/400 230/400 230/400 230/400 230/400
V DC -- -- 220/440/
880
5)
-- -- --
Operational voltage
Min. V AC/DC/pole 24 24 24 24 24 24
Acc. to EN 60898-1/-2 and EN 60947-2 Max. V DC/pole 72
4)
72
4)
250 72
4)
72
4)
72
Max. V AC 250/440 250/440 250/440 250/440 250/440 250/440
Acc. to UL 1077 and CSA C22.2 No.235 Max. V AC 480Y/277 480/277 -- 480/277 480/277 480/277
Max. V DC 60 60 -- -- -- --
Breaking capacity
1)
•I
cn
acc. to IEC/EN 60898-1 kA AC 610 10 15 -- 10
•I
cn
acc. to IEC/EN 60898-2 kA DC 10 10 10 15 -- 10
•I
cu
acc. to IEC/EN 60947-2 kA AC 30 ... 10
1)
35 ... 10
1)
35 ... 10
1)
50 ... 15
1)
70 ... 20
1)
10
kA DC 15 15 15 15 15 15
• Acc. to UL1077 and CSA C22.2 No.235 kA AC 5 5 -- 5 5 5
Insulation coordination
• Rated insulation voltage V AC 250/440
V DC/pole -- -- 250 -- -- --
Rated frequency Hz 50/60
Pollution degree for overvoltage category 3/III
3)
Touch protection Acc. to EN 50274 Yes
Handle end position, sealable Yes
Degree of protection Acc. to EN 60529 IP20 with connected conductors,
IP40 in the area of the handle with distribution cover
CFC and silicone-free Yes
Mounting
• Snap-on fixing system Yes --
• Standard mounting rail and screw fixing -- Yes
Terminals ± screw (Pozidriv) 2
• Tunnel terminals at both ends -- Yes
• Combined terminals at both ends Yes --
• Terminal tightening torque Nm 2.5 ... 3 2.5 ... 3.5
lb/in 22 ... 26 22 ... 31
Conductor cross-sections
• Solid and stranded mm
2
See 5SY conductor cross-sections 4 ... 50
• Finely stranded, with end sleeve mm
2
1.5 ... 35
•AWG cables
(Cu 60/75 °C I
n
≤ 40 A; 60 °C I
n
> 40 A)
AWG 14 ... 4 14 ... 2
Mains connection
•AC Any
•DC Any
2)
Any
Mounting position Any
Service life Actuations 20000
On average, with rated load Actuations 10000, for 5SY5 at 40 A, 50 A and 63 A
Ambient temperature °C -25 ... +55, max. 95 % humidity
Storage temperature °C -40 ... +75
Resistance to climate Acc. to IEC 60068-2-30 6 cycles
Shock Acc. to IEC 60068-2-27 m/s
2
150 at 11 ms half-sine
Resistance to vibrations Acc. to IEC 60068-2-6 m/s
2
50 at 25 ... 150 Hz and 60 at 35 Hz (4 sec)
PH_03.book Seite 6 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
7
Siemens · 10/2015
Miniature Circuit Breakers
5SY and 5SP miniature circuit breakers
5SY conductor cross-sections
1)
Only conductors of the same cross-section and same conductor type.
2)
When bus mounting with pin busbars 5ST36.., 5ST37.., the busbars are
connected only in the rear terminal area.
3)
According to DIN 46228-4:1990, there is no finger-safety when using end
sleeves with 18 mm.
4)
The general installation regulations must be observed; finely stranded
conductors must be twisted before being inserted into the terminal; no
individual copper fibers are allowed to project after connecting to the
terminal.
Number of connected conductors Solid (≤ 10 mm
2
) /
Stranded (≥ 16 mm
2
)
Finely stranded with insulated
end sleeve
3)
Finely stranded without end
sleeve
4)
1 conductor at front (+ busbar
2)
rear) mm
2
0.75 ... 35 0.75 ... 25 1 ... 25
1 conductor at rear mm
2
0.75 ... 25 0.75 ... 16 1 ... 16
2 conductors at front
1)
(+ busbar
2)
rear) mm
2
0.75 ... 10 0.75 ... 6 1 ... 6
2 conductors at rear
1)
)mm
2
0.75 ... 6 0.75 ... 4 1 ... 4
1 conductor at front/1 conductor at rear mm
2
f: 0.75 ... 16 r: 0.75 ... 25 f: 0.75 ... 16 r: 0.75 ... 16 f: 1 ... 16 r: 1 ... 16
mm
2
f: 25 r: 0.75 ... 16 f: 25 r: 0.75 ... 6 f: 25 r: 1 ... 6
mm
2
f: 35 r: 0.75 ... 10
1 conductor at front/2 conductors at rear
1)
mm
2
f: 0.75 ... 35 r: 0.75 ... 6 f: 0.75 ... 16 r: 0.75 ... 4 f: 1 ... 16 r: 1 ... 4
mm
2
f: 25 r: 0.75 ... 2.5 f: 25 r: 1 ... 2.5
2 conductors at front
1)
/1 conductor at rear mm
2
f: 0.75 ... 10 f: 0.75 ... 25 f: 0.75 ... 6 r: 0.75 ... 16 f: 1 ... 6 r: 1 ... 16
2 conductors at front
1)
/2 conductors at rear
1)
mm
2
f: 0.75 ... 10 r: 0.75 ... 6 f: 0.75 ... 6 r: 0.75 ... 4 f: 1 ... 6 r: 1 ... 4
PH_03.book Seite 7 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
8Siemens · 10/2015
5SY and 5SP miniature circuit breakers
Miniature Circuit Breakers
■
Dimensional drawings
■
Circuit diagrams
Graphical symbols
5SY
1P 1P+N 2P 3P 3P+N 4P
5SP
1P 2P 3P 4P
45
90
44
70
6
72
7
8
5
6
3
4
1
2
72
N
N
5
6
3
4
1
2
54
5
6
3
4
1
2
36
3
4
1
2
36
N
N
1
2
18
1
2
I201_13655
I201_06140
90
45
6
70
44
1
2
1
2
3
4
1
2
3
4
5
6
81
1
2
3
4
5
6
7
8
10827 54
5SY4, 5SY6, 5SY7, 5SY8
1P 1P+N 2P 3P 3P+N 4P
5SP4
1P 2P 3P 4P
5SY5
1P 2P 4P
1
2
N
N
1
2
1
2
3
4
2
1
4
3
6
5
N
N
6
5
4
3
2
1
8
7
6
5
4
3
2
1
1
2
1
2
3
4
2
1
4
3
6
5
8
7
6
5
4
3
2
1
1
2
+
-
1
2
3
4
+
-+
-
1
2
3
4
5
6
7
8
+
-++
+
-
--
PH_03.book Seite 8 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
9
Siemens · 10/2015
Miniature Circuit Breakers
5SJ6...-.KS miniature circuit breakers, with plug-in terminals
■
Overview
Miniature circuit breakers with plug-in terminals are used for the
protection of socket outlets and lighting circuits with the most
common rated currents of 10 to 20 A.
■
Technical specifications
1)
The operational voltage 60 V DC/pole takes into account a battery
charging voltage with a peak value of 72 V.
■
Dimensional drawings
■
Circuit diagrams
Graphical symbols
5SJ6...-.KS
Standards EN 60898-1
Approvals www.siemens.com/lowvoltage/certificates
Rated voltage U
n
V AC 230/400
Operational voltage
• Min. V AC/DC/pole 24
•Max. V AC 250/440
V DC/pole 60
1)
Rated making and breaking capacity Acc. to EN 60898-1 kA AC 6
Insulation coordination
• Rated insulation voltage V AC 250/440
• Pollution degree for overvoltage category 2/III
Rated frequency Hz 50/60
Touch protection Acc. to EN 50274 Yes
Handle end position, sealable Yes
Degree of protection Acc. to EN 60529 IP20 with connected conductors,
IP40 in the area of the handle with distribution cover
CFC and silicone-free Yes
Terminals Screwless terminals on the outgoing terminals for 1.5 ... 4 mm
2
Conductor cross-sections
• Top, plug-in terminals
- Solid, stranded and finely stranded, without end sleeve
mm
2
1.5 ... 4
- Finely stranded, with end sleeve
mm
2
1.5 ... 2.5
• Bottom, tunnel terminal ± screw (Pozidriv) 2
- Solid, stranded or finely stranded,
with end sleeve
mm
2
0.75 ... 25
Mounting position Any
Service life
On average, with rated load
20000 actuations
Ambient temperature °C -25 ...+45, occasionally +55, max. 95 % humidity
Storage temperature °C -40 ... +75
Resistance to climate Acc. to IEC 60068-2-30 6 cycles
1P 1P+N 2P 3P
5
6
3
4
1
2
3
4
1
2
N
N
1
2
1
2
44
70
6
45
90
I201_13759
54363618
1P 1P+N 2P 3P
1
2
N
N
1
2
1
2
3
4
2
1
4
3
6
5
PH_03.book Seite 9 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
10 Siemens · 10/2015
5SY miniature circuit breakers, 1+N in 1 MW
Miniature Circuit Breakers
■
Overview
These miniature circuit breakers are used for the protection of
systems and installations with switched neutral conductors in
distribution boards with little space. They are just a single
modular width.
Compact busbars facilitate installation in space-saving
distribution boards.
■
Technical specifications
5SY30.. 5SY60..
Standards EN 60898-1
Approvals www.siemens.com/lowvoltage/certificates
Rated voltage U
n
V AC 230
Operational voltage
• Min. V AC/DC 24
•Max. V AC 250
V DC/pole 72
Rated making and breaking capacity I
cn
kA AC 4.5 6
Insulation coordination
• Rated insulation voltage V AC 250
• Pollution degree for overvoltage category 2/III
Rated frequency Hz 50/60
Touch protection Acc. to EN 50274 Yes
Handle end position, sealable Yes
Degree of protection Acc. to EN 60259 IP20 with connected conductors,
IP40 in the area of the handle with distribution cover
CFC and silicone-free Yes
Terminals ± screw (Pozidriv) 2
• Solid and stranded,
top and bottom terminal mm
2
0.75 ... 16
• Finely stranded, with end sleeve,
top and bottom terminal mm
2
0.75 ... 10
• Terminal tightening torque Nm 2.0 ... 2.5
Mounting position Any
Service life
On average, with rated load 20000 actuations
at 2A/4A and 40A: 8000 actuations
Ambient temperature °C -25 ...+45, occasionally +55, max. 95 % humidity
Storage temperature °C -40 ... +75
Resistance to climate Acc. to IEC 60068-2-30 6 cycles
Resistance to vibrations Acc. to IEC 60068-2-6 m/s
2
50 at 25 ... 150 Hz and 60 at 35 Hz (4 sec)
PH_03.book Seite 10 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
11
Siemens · 10/2015
Miniature Circuit Breakers
5SY miniature circuit breakers, 1+N in 1 MW
■
Dimensional drawings
■
Circuit diagrams
Graphical symbols
1P+N
N pole, right
1P+N
N pole, left
5ST36
Pin spacing in MW
5ST37
Pin spacing in MW
Dimensions of side view in mm (approx.) Dimensions of side view in mm (approx.)
5ST3613
5ST3614
5ST3615
5ST3762
5ST3764
5ST3763
5ST3765
7
70
45
90
I201_13982
18 44
1
2
N
N
7
70
45
90
I201_13983
18 44
N
N
1
2
15,2
9,2
L1 L2 L3
1 1
I201_13984
10
5,6
I201_13680
1
I201_13681
10
5,6
1
1P+N
N pole, right
1P+N
N pole, left
N
N
1
2
1
2
N
N
PH_03.book Seite 11 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
12 Siemens · 10/2015
Additional components
Miniature Circuit Breakers
■
Overview
The Siemens mounting concept supports the combination of all
5ST3 additional components with Siemens 5SY and 5SP
miniature circuit breakers and with 5SU1 RCBOs.
5SL and 5SY60.. miniature circuit breakers are suitable for
mounting auxiliary switches and fault signal contacts. Auxiliary
switches can also be mounted on 5TE8 flush-mounting circuit
breakers and 5SG71 MINIZED switch disconnectors.
Auxiliary switches (AS)
The auxiliary switch (AS) always signals the contact position of
the miniature circuit breaker, regardless of whether the miniature
circuit breaker was tripped manually or as the result of a fault. An
additional version is also available for the switching of small
currents and voltages for the control of programmable control
systems (PLCs) acc. to EN 61131-2. The auxiliary switch with
test button enables the testing of control circuits without the
need to switch the miniature circuit breaker.
Fault signal contacts (FC)
The fault signal contact (FC) signals the automatic tripping of the
miniature circuit breaker in the event of a fault, such as an
overload or a short circuit. If the fault signal contact is activated,
the contact position does not change if the miniature circuit
breaker is tripped manually. Fault signal contacts with TEST and
RESET buttons enable the testing of control circuits without the
need to trip the miniature circuit breaker. The red RESET button
integrated in the handle also indicates the automatic tripping of
the MCB. The signal can be acknowledged manually using the
RESET button.
Shunt trips (ST)
Shunt trips are used for the remote tripping of a miniature circuit
breaker.
Undervoltage releases (UR)
Undervoltage releases are integrated (e.g. in EMERGENCY-OFF
loops), thus ensuring that the MCB trips in the event of an
emergency, which, in turn, ensures disconnection of the control
circuit according to EN 60204. In the event that the voltage is
interrupted or too low, it also trips, i.e. prevents activation of the
MCB.
Remote controlled mechanisms (RC)
Remote controlled mechanisms are used for the remote ON/OFF
switching of miniature circuit breakers and the remote ON
switching of RC units, as well as the local manual switching of
these devices. A blocking function permits maintenance work. In
the event that a miniature circuit breaker or RC unit is tripped, an
acknowledgment must be carried out prior to switching back on.
The remote controlled mechanism has an operating mode
selector switch with the functions: "Locked", "Manual" and
"Remote Switching".
Selector switch position:
OFF: The remote controlled mechanism is switched off, blocked
mechanically and can be sealed and/or locked.
RC OFF: Only manual operation is possible.
RC ON: Both manual and remote operation are possible.
In the event that a device is tripped by a fault (RC units, miniature
circuit breakers), the handle of the basic device and remote
controlled mechanism switches to the OFF position. The
operator must then acknowledge the tripping by resetting the
remote controlled mechanism (OFF command) before it can be
reactivated. This serves the safety of the installation or to protect
personnel during maintenance work.
In an RC unit/miniature circuit breaker combination, the RC unit
is switched on asynchronously, i.e. prior to the miniature circuit
breaker. The RC units for 5SY and 5SP4 can be switched ON via
the MCB handle jumper using the supplied actuator attachment.
There is no need to switch off the RC unit via the remote
controlled mechanism as the MCB contacts ensure
disconnection of the electrical circuit.
The switching frequency is max. 2 actuations per minute. If this
actuation frequency is exceeded it may cause internal tripping
of the remote controlled mechanism as a protection against
possible overload. In this case, the remote controlled
mechanism must be switched OFF at the function selector
switch and not switched back on again for at least 5 minutes.
More additional 5ST3 ... components, such as AS, FC, ST and
UR, can be added to the right-hand side of the remote controlled
mechanism in line with the Siemens mounting concept.
RC units
RC units can be combined with miniature circuit breakers of
characteristic A, B, C and D. They then form a combination of
RCCB and MCB for personnel, fire and line protection. The
combinations can be tailored to meet individual requirements.
For information on RC units, see chapter "Residual Current
Protective Devices / Arc Fault Detection Devices (AFDDs)" in
Catalog LV 10.
PH_03.book Seite 12 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
13
Siemens · 10/2015
Miniature Circuit Breakers
Additional components
■
Technical specifications
Technical specifications for the RC units can be found in chapter "Residual Current Protective Devices / Arc Fault Detection Devices
(AFDDs)" in Catalog LV 10.
Auxiliary switches (AS) Fault signal contacts (FC)
5ST3010, 5ST3010-2
5ST3011, 5ST3011-2
5ST3012, 5ST3012-2
5ST3013
1)
, 5ST3013-2
2)
5ST3014
1)
, 5ST3014-2
2)
5ST3015
1)
, 5ST3015-2
2)
5ST3020, 5ST3020-2
5ST3021, 5ST3021-2
5ST3022, 5ST3022-2
Standards EN 62019; IEC/EN 60947-5-1; UL 1077; CSA C22.2 No. 235
Approvals www.siemens.com/lowvoltage/certificates
Short-circuit protection Miniature circuit breaker or gG 6 A fuse
Contact load
•Min. 50 mA, 24 V 1 mA/5 V DC 50 mA, 24 V
•Max. --
1)
= 100 mA/30 V DC
2)
= 50 mA/30 V DC
--
• 400 V AC, AC-14, NO A 2-- 2
• 230 V AC, AC-14, NO A 6-- 6
• 400 V AC, AC-13, NC A 2-- 2
• 230 V AC, AC-13, NC A 6-- 6
• 220 V DC, DC-13, NO+NC A 1-- 1
• 110 V DC, DC-13, NO+NC A 1-- 1
• 60 V DC, DC-13, NO+NC A 3-- 3
• 24 V DC, DC-13, NO+NC A 6-- 6
Service life, on average, with rated load 20000 actuations 20000 actuations 20000 actuations
Conductor cross-sections mm
2
0.5 ... 2.5 0.5 ... 2.5 0.5 ... 2.5
AWG 22 ... 14 22 ... 14 22 ... 14
Terminals
• Terminal tightening torque Nm 0.5 0.5 0.5
lb/in 4.5 4.5 4.5
Rated frequency Hz 50/60
Mounting position Any Any Any
Ambient temperature °C -25 ... +55 -25 ... +55 -25 ... +55
Storage temperature -40 ... +75 -40 ... +75 -40 ... +75
Resistance to climate Acc. to IEC 60068-2-30 Cycles 28
Shock Acc. to IEC 60068-2-27 m/s 50 at 11 ms half-sine
Resistance to vibrations Acc. to IEC 60068-2-6 m/s
2
50 at 10 ... 150 Hz
Undervoltage
releases (UR)
Shunt trips (ST) Remote controlled
mechanisms (RC)
5ST304. 5ST3030 5ST3031 5ST3050, 5ST3052
Standards EN 60947-1
Rated voltages U
n
V AC 230 110 ... 415 24 ... 48 230
V DC 24, 110 110 24 ... 48 --
• Operating rangeU
n
0.85 ... 1.1 x U
n
0.7 ... 1.1 x U
n
0.9 ... 1.15 x U
n
• Rated frequency f
n
Hz -- 50 ... 60 50 ... 60
Response limits
• Tripping < 0.35 ... 0.7 × U
n
-- --
Short-circuit protection Miniature circuit breakers B/C 6 A or fuse gG 6 A
Minimum contact load 50 mA, 24 V 50 mA, 24 V --
Tripping operations max. 2000 max. 2000 --
Service life, on average, with rated load 20000 actuations 20000 actuations 20000 actuations
5000 at RC unit
Conductor cross-sections mm
2
0.5 ... 2.5 0.5 ... 2.5 0.5 ... 2.5
AWG 22 ... 14 22 ... 14 22 ... 14
Terminals
• Terminal tightening torque Nm 0.8 0.8 0.4 ... 0.5
lb/in 6.8 6.8 4.5
Mounting position Any Any Any
Ambient temperature °C -25 ... +55 -25 ... +55 -20 ... +55
Storage temperature °C -40 ... +75 -40 ... +75 -40 ... +75
Resistance to climate Acc. to IEC 60068-2-30 Cycles 28
Shock Acc. to IEC 60068-2-27 m/s 50 at 11 ms half-sine
Resistance to vibrations Acc. to IEC 60068-2-6 m/s
2
50 at 10 ... 150 Hz
Switching frequency -- 2 actuations per minute
Switching duration s-- < 2
Minimum command duration s-- 0.2 continuous command possible
Rated power dissipation VA -- No intrinsic consumption,
in switching operation 26
Rated frequency Hz 50/60
Behavior in the event of control voltage failure -- No change
PH_03.book Seite 13 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
14 Siemens · 10/2015
Additional components
Miniature Circuit Breakers
■
Dimensional drawings
5ST3010
5ST3011
5ST3012
5ST3013
5ST3014
5ST3015
5ST3020
5ST3021
5ST3022
5ST3030
5ST3031
5ST3040
5ST3041
5ST3042
5ST3043
5ST3044
5ST3045
5ST3050
5ST3052
5ST3010-2
5ST3011-2
5ST3012-2
5ST3013-2
5ST3014-2
5ST3015-2
5ST3020-2
5ST3021-2
5ST3022-2
5ST3060
5ST3061
45
90
44
70
618
9
I201_13657
90
45
I201_12624a
74
736
44
63
90
9
I202_02032
I202_02033
45
90
70
I202_02033
45
90
70
90
9
I202_02032
Z_Z_
Z\
YX
^S _
^W
YW
]W
\^S`
Z]S[
^WGG^W
YX[
npYWYZZ`^^
PH_03.book Seite 14 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
15
Siemens · 10/2015
Miniature Circuit Breakers
Additional components
■
Circuit diagrams
Graphical symbols
5ST2510 5ST2512
X[S_
WSX\
WSZ
XWS_
WSX\
\
WSY
]\
WSZ
Z\
WSY
X\ TX
Y\
npYWYZZ`^_
X_S` WSX\
WSZ
XWS_ WSX\ \WSY
^W WSZ
[W WSY
X] TX
ZW
npYWYZZ`^`
Auxiliary switches (AS) Fault signal contacts (FC)
5ST3010
5ST3013
5ST3010-2
5ST3011
5ST3014
5ST3011-2
5ST3012
5ST3015
5ST3012-2
5ST3020
5ST3020-2
5ST3021
5ST3021-2
5ST3022
5ST3022-2
Shunt trips (ST) Undervoltage releases (UR) Remote controlled mechanisms (RC)
5ST3030
5ST3031
5ST3040
5ST3041
5ST3042
5ST3043
5ST3044
5ST3045
5ST3050
5ST3052
22
14
13
21
24
14
13
23
22
12
11
21
22
14
13
21
24
14
13
23
22
12
11
21
C2
C1
<
24
23
14
13
U
D1
D2
v
U
D1
D2
ON OFF
321NP
I201_10741a
M
P, N: Supply voltage
1: Return conductor
2: ON command
3: OFF command
PH_03.book Seite 15 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
16 Siemens · 10/2015
Additional components
Miniature Circuit Breakers
■
More information
The Siemens mounting concept supports the combination of all
5ST3 additional components with miniature circuit breakers of
the 5SY, 5SP and 5SL4 series and RCBOs of the 5SU1 series.
5SL and 5SY60.. miniature circuit breakers are suitable for
mounting auxiliary switches and fault signal contacts. Auxiliary
switches can also be mounted on 5TE8 flush-mounting circuit
breakers and 5SG71 MINIZED switch disconnectors.
The diagram shows which additional components can be
mounted on either the right or the left.
Mounting concept for RCBOs, see chapter "Residual Current Protective Devices / Arc Fault Detection Devices (AFDDs)" in
CatalogLV10.
or
or or or
or or or
5ST3
RC unit MCB RC AS FC AS
FC
AS
FC
AS
FC
FC
AS
AS FC AS
FC
AS
FC
AS
FC
FC
AS
AS FC AS
FC
AS
FC
AS
FC
FC
AS
ST
UR
or or
5SM2 5SY / 5SP4
RCBO RC
5SU1
RC unit: Residual current unit
MCB: Miniature circuit breaker
RCBO: Residual current operated circuit breaker
RC: Remote controlled mechanism
UR: Undervoltage release
ST: Shunt release
AS: Auxiliary switch
FC: Fault signal contact
I201_18123a
PH_03.book Seite 16 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
17
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
5ST standard busbars
■
Overview
The busbar system with pin-type connections can be used for all
5SL6, 5SJ6 ...-.KS and 5SY miniature circuit breakerswith or
without mounted auxiliary switch (AS) or fault signal
contact (FC).
Busbars in 10 mm
2
and 16 mm
2
versions are available.
With bars that can be cut to length, the 5ST37 busbar system
can be tailored to any requirements.
The extremely flexible 5ST36 busbar system with fixed lengths
also enables installation in any length as the busbars can be
overlapped.
No further need for time-consuming tasks, such as cutting,
cutting to length, deburring, cleaning of cut surfaces and
mounting of end caps.
Any free pins on the busbars can be made safe by covering with
touch protection.
Further information on the bus-mounting of miniature circuit
breakers with residual current operated circuit breakers, see
chapter "Residual Current Protective Devices / Arc Fault
Detection Devices (AFDDs)" in Catalog LV 10.
■
Technical specifications
5ST3
Standards EN 60439-1 (VDE 0660-500): 2005-01
Busbar material SF-Cu F 24
Partition material Plastic Cycoloy 3600,
heat-resistant above 90 °C,
flame-retardant,
self-extinguishing,
free of dioxins and halogens
Rated operational voltage U
c
V AC 400
Rated current I
n
• Cross-section 10 mm
2
A63
• Cross-section 16 mm
2
A80
Rated impulse withstand voltage U
imp
kV 4
Test pulse voltage (1.2/50) kV 6.2
Rated conditional short-circuit current I
cc
kA 25
Resistance to climate
• Constant atmosphere Acc. to DIN 50015 23/83; 40/92; 55/20
• Humid heat Acc. to IEC 60068-2-30 28 cycles
Insulation coordination
• Overvoltage category III
• Pollution degree 2
Maximum busbar current I
S
/phase
• Infeed at the start of the busbar
- Cross-section 10 mm
2
A63
- Cross-section 16 mm
2
A80
• Infeed at the center of the busbar
- Cross-section 10 mm
2
A100
- Cross-section 16 mm
2
A130
Infeed at the start or end of the busbar Infeed along the busbar or midpoint infeed
The sum of the outgoing current per branch (1, 2, 3...n) must not be greater
than the max. busbar current I
S
/phase.
S
I201_13755
S1 S2
321
1
23
I201_13754a
S
PH_03.book Seite 17 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
18 Siemens · 10/2015
5ST standard busbars
Miniature Circuit Breakers
Busbars
■
Dimensional drawings
5ST36
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3600
5ST3630
5ST3601
5ST3602
5ST3631
5ST3632
5ST3603
5ST3633
5ST3604
5ST3605
5ST3634
5ST3635
5ST3606
5ST3607
5ST3608
5ST3636
5ST3637
5ST3638
5ST3640
5ST3641
5ST3642
5ST3613
5ST3614
5ST3615
5ST3667
5ST3616
5ST3617
5ST3618
5ST3620
5ST3643
5ST3644
5ST3645
5ST3668
5ST3646
5ST3647
5ST3648
5ST3650
5ST3621
5ST3622
5ST3623
5ST3651
5ST3652
5ST3653
14
3,4
111,5
I201_13663
1,5
L1 L2
15,2
6,6
I201_13666
1
19
7,3
L1 L2
1
L1 L2
1 1,5
I201_13664
15,2
9,2
L1 L2 L3
1 1
L1 L2 L3
1 1 1,5
I201_13668a
L1 L2 L3
1,51,5 1,5
L1 L2 L3
1 1
L1 L2 L3
1 1 1,5
I201_13669a
L1 L2 L3
1,51,5 1,5
19
10,3
15,2
11,8
L1 L2 L3 N
1 1 1
L1 L2 L3 NNN
I201_13670
1 1 1 1 1
1,5
19
13,3
L1 L2 L3 N
1 1 1
L1 L2 L3 NNN
I201_13671
1 1 1 1 1
1,5
PH_03.book Seite 18 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
19
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
5ST standard busbars
5ST36
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3624
5ST3654
15,2
9,2
I201_13672
L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2
111111211 1
1,5
I201_13673
L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2
111111211 1
19
10,3
1,5
5ST37
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3700
5ST3701
5ST3730
5ST3731
5ST3702
5ST3703
5ST3732
5ST3733
5ST3704
5ST3705
5ST3734
5ST3735
5ST3706
5ST3707
5ST3736
5ST3737
Single-phase Single-phase Two-phase Two-phase
5ST3708
5ST3710
5ST3738
5ST3740
5ST3711
5ST3712
5ST3741
5ST3742
5ST3713
5ST3714
5ST3743
5ST3744
5ST3715
5ST3716
5ST3745
5ST3746
5ST3746-2
5ST3735-2
3,5
13
1,5
I201_13674
1
I201_13675
15
18
1
L1 L2
11,5
L1 L2
15
18
L1 L2 L3
11 1,5
L1 L2 L3
11
L1 L2 L3
1,5 1,5
I201_13677
L1 L2 L3 N
1 1 1
I201_13679
18
20
L1 N L2 N L3 N
1 1,5 1,5 1,51 1
I201_19174
17
20
L1 L2 L2L1
2 2 2
I201_19201
17
14
PH_03.book Seite 19 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
20 Siemens · 10/2015
5ST standard busbars
Miniature Circuit Breakers
Busbars
5ST37
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3770-2
5ST3770-3
5ST3770-4
5ST3770-5
5ST3762
5ST3764
5ST3763
5ST3765
N
N
N
N
N
N
N
N
L3
L2
L3
L2
L1
L1
L1
L1
I201_18187
1
N
N
N
N
N
N
N
N
L3
L2
L3
L2
L1
L1
L1
L1
I201_18188
1,5
1 1 1
1 1 1
11,9
30,2
18,3
30,2
22,1
1
L1 L2 L2L3 L3NNN
I202_01456
11,9
30,2
1 1 11 1 1
18,3
30,2
22,1
1,5
L1 L2 L2L3 L3NNN
I202_01458
10
5,6
I201_13680
1
I201_13681
10
5,6
1
PH_03.book Seite 20 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
21
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
5ST3 busbars acc. to UL 508
■
Overview
Products according to UL standards are used in North America,
but also in several other countries. This is important in particular
for exporting machines or electrical switchgear assemblies and
equipment to the USA. Acceptance and delivery are possible
only if the relevant UL standards are satisfied.
The 5ST37 busbar system according to UL 508 and CSA is
suitable for both universal use worldwide with all 5SY and 5SP
miniature circuit breakers for "Supplementary Protection"
certified according to UL 1077 and for 3NW and 3NC fuse
holders certified according to UL 512. Not approved for use in
feeder circuits.
The busbars are available in single-, two- and three-phase
versions with different pin spacings and with two cross-sections
18 mm² and 25 mm². Infeed can be directly into the terminals of
the miniature circuit breaker or through connection terminals.
The connection terminals are available in two versions – for
direct infeed at the busbar or for infeed directly at the miniature
circuit breaker/fuse holder. Pins that are not required can be
covered with touch protection covers.
■
Technical specifications
5ST37..-0HG 5ST37..-2HG 5ST3770-0HG 5ST3770-1HG
Standards UL 508, CSA C22.2 No. 14-M 95 / IEC 60999
Approvals UL508 File No. E328403
CSA
Operational voltage
• Acc. to IEC V AC 690
• Acc. to UL 508 V AC 600
Rated conditional short-circuit current kA 10
• Dielectric strength kV/mm 25
• Surge strength kV > 9.5
Max. current UL A -- -- 115
IEC A -- -- 160
Maximum busbar current I
S
/phase
• Infeed at the start of the busbar A 80 100 -- --
• Infeed at the center of the busbar A 160 200 -- --
Insulation coordination
• Overvoltage category III
• Pollution degree 2
Short-circuit current load capability 10000 A RMS sym. 600 V for three circuits
18 mm
2
100 000 A RMS sym. for protection with Class J 175 A
25 mm
2
100 000 A RMS sym. for protection with Class J 200 A
Busbar cross-section mm
2
Cu 18 25 -- --
Infeed Any
Conductor cross-sections Solid AWG -- -- 10 ... 1/0 10 ... 1
mm
2
-- -- 6 ... 35 (Cu 60 °C) 6 ... 50 (Cu 75 °C)
Stranded AWG -- -- 10 ... 2
mm
2
-- -- 6 ... 35
Terminals ± screw (Pozidriv) -- -- 2 2
• Terminal tightening torque Nm -- -- 53.5
lb/in -- -- 50 35
Infeed at the start or end of the busbar Infeed along the busbar or midpoint infeed
The sum of the outgoing current per branch (1, 2, 3...n) must not be greater
than the max. busbar current I
S
/phase.
S
I201_13755
S1 S2
321
1
23
I201_13754a
S
PH_03.book Seite 21 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
22 Siemens · 10/2015
5ST3 busbars acc. to UL 508
Miniature Circuit Breakers
Busbars
■
Dimensional drawings
5ST37 busbars
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3701-0HG 5ST3703-0HG 5ST3705-0HG 5ST3707-0HG
5ST3710-0HG 5ST3712-0HG 5ST3714-0HG
5ST3701-2HG 5ST3705-2HG
5ST3710-2HG 5ST3750-0HG
5ST3748-0HG 5ST3770-0HG 5ST3770-1HG
2
1
I202_02123
1,5
15
5
1,5
L2L1
1,51
L2L1
1
21
23
I202_02124
23
21
L1 L2 L3
11 1,5
L1 L2 L3
11
L1 L2 L3
1,5 1,5
I202_02122
1,5
2,5
I202_02104
1,5
15
5
23
21
1,5
L1 L2
2
I202_02105
23
21
L1 L2 L3
21,5 1,5
I202_02106
24
22 9,5
I202_02108
14
59,5
1
I202_02107
18,5
60
83
16 28,5
I202_02110
30
40 18
I202_02111
5ST36 touch guard
Pin spacing in MW (modular width; 1 MW = 18 mm)
Dimensions of side view in mm (approx.)
5ST3655-0HG
85,2
14 3,8
5,7
R 0,5
24
23,8
71,2
I202_02109
17,8
PH_03.book Seite 22 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
23
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
5ST2 distribution blocks
■
Overview
Distribution blocks for standard rail mounting
Using distribution blocks it is possible to implement one, two,
three and four-phase systems with a rated current of up to 400 A.
This allows supply terminals to be divided into several load
circuits with different cable cross-sections.
The distribution blocks are made of thermoplastic with electrical
and mechanical components, which enables their use under
high thermal and mechanical load acc. to IEC 60947-7-1.
■
Technical specifications
5ST2501 5ST2502 5ST2503
Standards,
certifications
IEC 60947-7-1
Degree of protection IP 20
Poles 4
Approved cable Copper
Conductor cross section
• Inputs per pole
- Solid/stranded conductor
acc. to IEC
mm² 1 x 2.5 … 16 1 x 6 … 35 1 x 10 … 35
Neutral conductor mm² -- 1 x 6 … 35 --
- Flexible wire with sleeve
connector
mm² 1 x 2.5 … 10 1 x 6 … 25 1 x 10 … 25
Neutral conductor mm² -- 1 x 6 … 25 --
• Outputs per pole
- Solid/stranded conductor
acc. to IEC
Large mm² 8 x 1,5 … 10 2 x 4 … 16 3 x 6 … 25
Small mm² -- 5 x 1,5 … 6 8 x 2.5 … 16
Neutral conductor Large mm² -- 6 x 4 … 16 --
Small mm² -- 4 x 1,5 … 10 --
- Flexible wire with sleeve
connector
Large mm² 8 x 1,5 … 10 2 x 4 … 10 3 x 6 … 16
Small -- 5 x 1,5 ... 6 8 x 2,5 ... 10
Neutral conductor Large mm² -- 6 x 4 … 10 --
Small -- 4 x 1,5 ... 6 --
Tightening torque
• Inputs lb/in 13.5 13.5 3.5 ... 5
Nm 1.5 1.5 2
Plug-in connection PZ2 PZ2 PZ2
• Outputs Large lb/in 13.5 13.5 13.5
Nm 1.5 1.5 1.5
Plug-in connection PZ1 PZ2 PZ2
Small lb/in -- 7.2 13.5
Nm -- 0.8 1.5
Plug-in connection -- PZ1 PZ2
Operational voltage
• IEC, max. V 690 690 1000 V AC
1500 V DC
Overcurrent protection
• Max. rated current A 80 125 175
• Rated peak withstand current (I
pk
)kA21.6 24 20
• Rated short-time withstand current (I
cw
1 s) kA 34.2 6.2
Block dimensions (D x H x W) mm 88 x 49 x 85 75 x 45 x 98 102 x 47 x 87
PH_03.book Seite 23 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
24 Siemens · 10/2015
5ST2 distribution blocks
Miniature Circuit Breakers
Busbars
UL types
1)
Copper jumper is tested for a rated current of 100 A
5ST2504 5ST2505 5ST2507 5ST2508 5ST2511
Standards,
certifications
UL 1059 / UL 486E / IEC 60947-7-1
UL File No. E80027 / XCFR2
C22.2 No. 158 -1987 / XCFR8
UL 1059 / UL 486E / IEC 60947-7-1
UL File No. E80027 / XCFR2
Degree of protection IP 20
Poles 1
Approved cable Copper
Wiring type
• Front/back
Factory and field wiring
Pressure wire connector
Conductor cross section
• Inputs
- Solid and stranded conductor
acc. to UL
Large AWG 1 x 14 … 4 1 x 8 … 2 1 x 8 … 2 / 0 1 x 2 … 4 / 0 1 x 3 /
0 … 350 MCM
- Solid and stranded acc. to IEC mm² 2.5 ... 16 10 ... 35 10 ... 70 35 ... 120 95 … 185
- Solid and stranded conductor
acc. to UL
Small AWG -- 1 x 14 ... 6 --
- Solid and stranded acc. to IEC mm² -- 6 ... 16 --
- Finely stranded with end sleeve
acc. to UL
Large AWG 1 x 14 … 4 1 x 8 … 2 1 x 8 … 1 1 x 2 … 3 / 0 3 / 0 … 5 / 0
- Finely stranded with end sleeve
acc. to IEC
mm² 2.5 ... 16 10 ... 35 10 ... 50 35 ... 95 95 … 150
- Finely stranded with end sleeve
acc. to UL
Small AWG -- 1 x 14 ... 6 --
- Finely stranded with end sleeve
acc. to IEC
mm² -- 6 ... 16 --
•Outputs
- Solid and stranded conductor
acc. to UL
Top AWG 4 x 14 … 10 6 x 14 … 6 6 x 14 … 6 4 x 16 … 8 --
- Solid and stranded acc. to IEC mm² 2.5 ... 6 2.5 ... 16 2.5 ... 16 1.5 ... 10 --
- Solid and stranded conductor
acc. to UL
Medium AWG -- 5 x 16 … 6
- Solid and stranded acc. to IEC mm² -- 1.5 ... 16
- Solid and stranded conductor
acc. to UL
Bottom AWG 2 x 14 … 6 -- 2 x 14 … 2
- Solid and stranded acc. to IEC mm² 2.5 ... 16 -- 2 x 2.5 … 35
- Finely stranded with end sleeve
acc. to UL
Top AWG 4 x 14 … 10 6 x 14 … 6 6 x 14 … 6 2 x 14 … 4
- Finely stranded with end sleeve
acc. to IEC
mm² 2.5 ... 6 2.5 ... 16 2.5 ... 16 2 x 2,5 ... 25
- Finely stranded with end sleeve
acc. to UL
Bottom AWG 2 x 14 … 6 -- 2 x 14 … 4 --
- Finely stranded with end sleeve
acc. to IEC
mm² 2.5 ... 16 -- 2 x 2.5 … 25 --
Tightening torque
• Inputs lb/in 13.2 ... 26.5 31 ... 44 44 ... 53 170 ... 186 222
Nm 1.5 ... 3 3.5 ... 5 5 ... 6 19 ... 21 25
Plug-in connection Allen key (4 mm) Allen key (5 mm) Allen key (6 mm) Allen key (8 mm)
• Outputs Large lb/in 13.2 ... 26.5 17.7 ... 26.5 13.2 ... 26.5 31 ... 62
Nm 1.5 ... 3 2 ... 3 1.5 ... 3 3.5 ... 7
Plug-in connection PZ2 Standard screwdriver
Small lb/in 7 ... 13.2 -- 18 ... 27
Nm 0.8 ... 1.5 -- 2 ... 3
Plug-in connection PZ1 -- Standard screwdriver
Amperes per pole, max. (UL/IEC) A80/80 115/125 160/160 230/250 310/400
Operational voltage
•UL, max. (AC) V 600
•IEC, max. (AC/DC) V1000/1500
Overcurrent protection
• Required class J
• Max. rated current (UL/IEC) A 80/80 115/125 160/160 230/250 310/400
• SCCR RMS Sym A kA 100
• Rated peak withstand current (I
pk
)kA2.7 30 51
• Rated short-time withstand current (I
cw
1 s) kA 1.9 4.2 11 21
Clearance
• Air inches
(mm)
3 / 8 (9.5)
• Creepage distance inches
(mm)
1 / 2 (12.7)
Fire class UL 94V-0
Block dimensions (D x H x W) mm 66 x 47 x 27 74 x 47 x 27 92 x 49 x 35 96 x 49 x 45 96 x 49 x 45
Connections With cable up to
16 mm²
With connector or
cable up to
16 mm²
1)
Lateral incoming
feeder for parallel
connection with
copper bar
(max. 16 x 5 mm)
-- --
PH_03.book Seite 24 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
25
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
5ST2 distribution blocks
■
Dimensional drawings
5ST2504 5ST2505
5ST2507 5ST2508
5ST2511 5ST2501
5ST2502 5ST2503
I201_18405
434
66
27
I201_18406
434
74
27
I201_18407
445
92
35
I201_18408
445
96
45
I201_18409
445
96
45
495
88
85
I201_18402
I201_18403
41
5
75
98
I201_18404
50
87
162
PH_03.book Seite 25 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
26 Siemens · 10/2015
SIKclip wiring system
Miniature Circuit Breakers
Busbars
■
Overview
SIKclip is a fast wiring system that simplifies the connection of
control switches:
• For mounting directly on the rear vertical CU busbar system
• Mounting via brackets on the rear of the DIN rail
The 4-pole busbar can handle loads of up to 250 A, each
individual contact up to 63 A.
High degree of protection because each contact is locked
individually.
SIKclip is made of thermoplastic acc. to IEC 60439-3 and is
suitable for high thermal loads.
Note:
To install the SIKclip wiring system in the ALPHA AS, the busbars
must be installed in a vertical rear position, but not recessed. If
the busbars are in a recessed position the cables will not reach
the circuit breakers.
■
Technical specifications
5ST25..
Compliance to standards EN 60947-1, EN 61439-1
Degree of protection IP20
Max. rated current I
n
A250 at 40 °C ambient temperature
Max. rated output current I
n
A63 A at 40 °C ambient temperature
Rated operational voltage U
n
V AC 400
Rated insulation voltage V AC 660
Test voltage kV 2.5, 50 Hz
Connecting cables 40 A (6 mm
2
), 63 A (10 mm
2
)
Connecting cable type H07VK
Ambient temperature °C -5 ... +60
PH_03.book Seite 26 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
27
Siemens · 10/2015
Miniature Circuit Breakers
Busbars
SIKclip wiring system
■
Dimensional drawings
436,5
50
L1
647,5
L2 L3 N Ø8,5
25 25 50
50
17
12,5
65
29,8 (N)
40,3 (L3)
50,8 (L2)
58,3 (L1)
L1 L2 L3 N Ø8,5
I201_18489
25 25 50
F
F
mounting bracket
mounting bracket
transparent protective cover
(40 x 16 x 252)
transparent protective cover
(40 x 16 x 252)
PH_03.book Seite 27 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
28 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
■
Overview
Breaking capacity
Particular demands are made on miniature circuit breakers with
regard to breaking capacity.
The values are standardized and are determined according to
the test conditions of IEC/EN 60898-1/-2 or DIN VDE 0641-11.
The values of the rated breaking capacity I
cn
are ,
and
.
For other test conditions, it is also possible to specify values
higher than those stipulated in IEC/EN 60898-1/-2 or
DIN VDE 0641-11.
One such standard is IEC/EN 60947-2 or DIN VDE 0660-101 for
circuit breakers.
5SL3, 5SL4, 5SL6, 5SY6, 5SY4, 5SY7, 5SY8, 5SY60 and 5SP4 miniature circuit breakers
1)
D50 and D63: I
cu
= 15 kA.
2)
D50 and D63: I
cu
= 20 kA.
5SY5 miniature circuit breakers
5SY30.. and 5SY60.. miniature circuit breakers.
6 000
10 000
15 000
IEC/EN 60898-1 IEC/EN 60947-2
1-pole, 1-pole+N 2-, 3-, 4-pole, 3-pole+N 1-pole, 1-pole+N 2-, 3-, 4-pole, 3-pole+N
230 V AC AC 400 V 230 V AC AC 400 V
I
n
[A] I
cn
[kA] I
cn
[kA] I
cu
[kA] I
cu
[kA]
5SL3 0.3 ... 63 4.5 --
5SL4 0.3 ... 63 10 10
5SL6 0.3 ... 63 6 6
5SY6 (without 5SY60) 0.3 ... 6 630
8 ... 32 615
40 ... 63 610
5SY4 0.3 ... 6 10 35
8 ... 32 10 20
40 ... 63 10 15
80 10 10
5SY7 0.3 ... 2 15 50
3 ... 6 15 40
8 ... 10 15 30
13 ... 32 15 25
40 ... 63 15 20
1)
5SY8 0.3 ... 2 -- 70
3 ... 6 -- 50
8 ... 10 -- 40
13 ... 32 -- 30
40 ... 63 -- 25
2)
5SY30.. 2 ... 40 4.5 -- --
5SY60.. 2 ... 40 6-- 6--
5SP4 80 ... 125 10 10
Miniature circuit breakers,
universal current
IEC/EN 60898-2 IEC/EN 60898-2
1-pole 2-pole 1-pole 2-pole
230/400 V AC AC 400 V 220 V DC 440 V DC
I
n
[A] I
cn
[kA] I
cn
[kA] I
cn
[kA] I
cn
[kA]
5SY5 0.3 ... 63 10 10
Rated making and
breaking capacity I
cn1
IEC/EN 60898-1
1-pole + N
230 V AC
I
n
[A] I
cn1
[kA]
5SY30.. 2 ... 16 4.5
20 ... 40 3
5SY60.. 2 ... 4 6
6 ... 16 4.5
PH_03.book Seite 28 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
29
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
■
Characteristic curves
Tripping characteristics acc. to IEC/EN 60898-1, DIN VDE 0641-11
Tripping characteristic A
For limited semiconductor protection, protection of measuring
circuits with transformers. Protection of circuits with tripping in
0.4 s acc. to DIN VDE 0100-410, for long cable lengths.
Tripping characteristic B
MCBs with this tripping characteristic are designed for universal
use in socket outlet and lighting circuits. Proof of personal safety
acc. to DIN VDE 0100-410 is not required.
Tripping characteristic C
In lamp and motor circuits with higher starting currents, MCBs
with tripping characteristic C are generally used.
Tripping characteristic D
For electrical circuits with strong pulse-generating equipment,
such as transformers or solenoid valves.
30
I201_13651
201510865432
1
2
4
10
20
40
2
1
4
10
20
40
6
60
120
1
6
Multiple of rated current
Tripping time
MinutesSeconds
1.5
1.451.13
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
30
I201_13653
201510865432
1
2
4
10
20
40
2
1
4
10
20
40
6
60
120
1
6
Multiple of rated current
Tripping time
MinutesSeconds
1.5
1.451.13
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
30
I201_13652
201510865432
1
2
4
10
20
40
2
1
4
10
20
40
6
60
120
1
6
Multiple of rated current
Tripping time
MinutesSeconds
1.5
1.451.13
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
30
I201_13654
201510865432
1
2
4
10
20
40
2
1
4
10
20
40
6
60
120
1
6
Multiple of rated current
Tripping time
MinutesSeconds
1.5
1.451.13
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
PH_03.book Seite 29 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
30 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Tripping characteristics
Tripping behaviour at 30 °C ambient temperature
Correction factors for the rated current at different ambient
temperatures for
5SL3...-. and 5SL6...-.
Dependence of the permissible continuous load current on the
ambient temperature for 5SL3...-. and 5SL6...-. miniature circuit
breakers
The valid curve for the correction factor can be found in the
following table.
Correction factors for the rated current at different ambient
temperatures for
5SL4…-.
Dependence of the permissible continuous load current on the
ambient temperature for 5SL4...-. miniature circuit breakers
Curve for correction factor for 5SL3...-. and 5SL6...-. miniature circuit breakers (for curves, see diagram above)
Tripping
characteristic
Standards Thermal release Electromagnetic release
Test currents: Test currents:
Small Large Tripping time Hold Latest Tripping time
test current test current I
n
≤63 A I
n
> 63 A tripping
I
1
I
2
ttI
4
I
5
t
A-- 1.13 × I
n
> 1 h > 2 h 2 × I
n
≥ 0.1 s
1.45 × I
n
< 1 < 2 3 × I
n
< 0.1 s
BIEC/EN 60898-1, 1.13 × I
n
> 1 h > 2 h 3 × I
n
≥ 0.1 s
DIN VDE 0641-11 1.45 × I
n
< 1 < 2 5 × I
n
< 0.1 s
CIEC/EN 60898-1, 1.13 × I
n
> 1 h > 2 h 5 × I
n
≥ 0.1 s
DIN VDE 0641-11 1.45 × I
n
< 1 < 2 10 × I
n
< 0.1 s
DIEC/EN 60898-1, 1.13 × I
n
> 1 h > 2 h 10 × I
n
≥ 0.1 s
DIN VDE 0641-11 1.45 × I
n
< 1 < 2 20 × I
n
< 0.1 s
(IEC 60898: 50 × I
n
)
I201_13659
-20 -10 0 2010 4030 50
Curve 1
Curve 2
Curve 3
Ambient Temperature [°C]
Correction Factor
0.8
0.9
1.0
1.1
1.2
1.3
0,8
0,9
1,0
1,1
1,2
1,3
-20 -10 0 2010 4030 50
Curve 1
Curve 2
Curve 3
Ambient Temperature [°C]
Correction Factor
I201_18164
Rated current (A) 0.3 0.5 11.6 2346810 13 16 20 25 32 40 50 63
Characteristic Pole type Valid curve for the correction factor for 5SL miniature circuit breakers
B1P/2P -- -- -- -- -- -- -- 3-- 222333333
3P/4P -- -- -- -- -- -- -- 3-- 222321233
C1P/2P 332223332322333333
3P/4P 222122232322323233
PH_03.book Seite 30 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
31
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Correction factors for the rated current at different ambient temperatures for 5SY
Dependence of the permissible continuous load current on the
ambient temperature for 5SY miniature circuit breakers
(without 5SY60..)
The valid curve for the correction factor can be found in the
following table.
Dependence of the permissible continuous load current on the
ambient temperature for 5SY60. . miniature circuit breakers
The valid curve for the correction factor can be found in the
following table.
Curve for correction factor for 5SY miniature circuit breakers (for curves, see left-hand diagram above)
Curve for correction factor for 5SY60.. miniature circuit breakers (for curves, see right-hand diagram above)
I201_13659
-20 -10 0 2010 4030 50
Curve 1
Curve 2
Curve 3
Ambient Temperature [°C]
Correction Factor
0.8
0.9
1.0
1.1
1.2
1.3
Curve 1
Curve 2
Curve 3
Ambient Temperature [°C]
Correction Factor
-20 -10 0 2010 4030 50
0.8
0.9
1.0
1.1
1.2
1.3
I201_18160
Rated current (A) 0.3 0.5 11.6 2346810 13 16 20 25 32 40 50 63 80
Characteristic Pole type Valid curve for the correction factor for 5SY miniature circuit breakers
A1P/2P 332223332322322323--
3P/4P 222122222211211112--
B1P/2P -- -- -- -- -- -- -- 3-- 3223323232
3P/4P -- -- -- -- -- -- -- 2-- 2122111121
C1P/2P 3322233333233223232
3P/4P 2221222233222211121
D1P/2P 332223333323322323--
3P/4P 222122223322222212--
Rated current (A) 246810 13 16 20 25 32 40
Characteristic Valid curve for the correction factor for 5SY60.. miniature circuit breakers
B-- -- 1-- 2222122
C-- -- 132233122
PH_03.book Seite 31 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
32 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Correction factors for rated current if bundling
If more than one electrical circuit is loaded in a series of
miniature circuit breakers the resulting increase in ambient
temperature affects the characteristic curve. In this case an
additional correction factor, specific to the rated current of the
miniature circuit breaker, must be taken into account.
Correction factors for rated current at different frequencies
The tripping characteristic applies to a frequency of 50 Hz to
60 Hz. In the case of other frequencies, the following correction
factors must be taken into account.
In the overrange, the limits of the characteristic curves
correspond to the correction factors of the thermal tripping
operation. In the event of a short-circuit, the limits of the
characteristic curves correspond to the correction factors of the
magnetic tripping operation.
Correction factors for rated breaking capacities I
cn
dependent
on altitude above sea level of location
Thermal tripping operation
Magnetic tripping operation
Dependence of the reduction factor on the ambient temperature for 5SP miniature circuit breakers
Curve for correction factor for 5SP4 miniature circuit breakers
(for curves, see diagram on the left)
Number of MCBs 12 ... 3 4 ... 6 > 7
Correction factor K 1.00 0.90 0.88 0.85
Altitude
above sea
level / m
Correction
factor
I
cn
/ kA
5SY6
I
cn
/ kA
5SY4
I
cn
/ kA
5SY7
I
cn
/ kA
5SP4
500 1 6 10 15 10
1000 1 6 10 15 10
1500 1 6 10 15 10
2000 1 6 10 15 10
2500 0.94 5.6 9.4 14.1 9.4
3000 0.88 5.3 8.8 13.2 8.8
3500 0.83 58.3 12.4 8.3
4000 0.78 4.7 7.8 11.7 7.8
Rated current I
n
(A) Correction factor for
0 Hz 16 2/3 Hz 50/60 Hz 125 Hz 400 Hz 1000 Hz
5SL4...-. 0.3 ... 6 111111
8 ... 20 11110.99 0.98
25 ... 40 11110.99 0.96
50 ... 63 1110.99 0.96 0.92
5SY 0.3 ... 10 11110.99 0.97
1 ... 40 1110.98 0.97 0.93
50 ... 63 1110.98 0.94 0.86
5SP 80 ... 125 1110.97 0.92 0.85
Rated current I
n
(A) Correction factor for
0 Hz 16 2/3 Hz 50/60 Hz 125 Hz 400 Hz 1000 Hz
5SL4...-. B1 ... B63 -- 1.2 11.3 1.6 2.0
C0.3 ... C63 -- 1.2 11.2 1.5 1.9
D0.3 ... D63 -- 1.1 11.2 1.5 1.8
5SY 0.3 ... 63 1.4 111.2 1.4 1.7
5SP 80 ... 125 1.5 111.05 1.3 1.8
0,8
0,9
1,0
1,1
1,2
1,3
-20 -10 0 2010 4030 50
Curve 1
Curve 2
Curve 3
Ambient Temperature [°C]
Correction Factor
I201_18164
Rated current (A) 80 100 125
Characteristic
C1P 2 2 2
2P/3P/4P 1 1 1
D1P 2 3 --
2P/3P/4P 1 1 --
PH_03.book Seite 32 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
33
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Let-through current I
max
5SL3...-6
Let-through current I
max
5SL4...-7
Let-through current I
max
5SL6...-6
Let-through current I
max
5SL4...-6
Let-through current I
max
5SL4...-8
Let-through current I
max
5SL6...-7
max
B40
B6
B16
B32
B50/63
B20/25
B10/13
p
5000
4000
3000
2000
1000
0
0 1000 2000 3000 4000 5000 70006000
Let-Through Current
Prospective Short-Circuit Current
I201_19203
8000
7000
6000
5000
4000
3000
2000
1000
0
0
p
24681012
C0,3
C0,5
C1
C2
C3
C4
C6
C32
C40
C50/63
C8/10
C13/16
C20/25
C1,6
max
Let-Through Current
Prospective Short-Circuit Current
I201_19083
max
B40
B6
B16
B32
B50/63
B20/25
B10/13
p
5000
4000
3000
2000
1000
0
0 1000 2000 3000 4000 5000 70006000
Let-Through Current
Prospective Short-Circuit Current
I201_19086
p
8000
7000
6000
5000
4000
3000
2000
1000
0
024681012
B1
B2
B3
B4
B6
B8
B32/40
B50
B63
B10
B13
B16
B20
B25
max
Prospective Short-Circuit Current
Let-Through Current
I201_19084
8000
7000
6000
5000
4000
3000
2000
1000
0
p
024681012
max
D0,3
D0,5
D1
D2
D3
D4
D6
D40
D50/63
D8/10
D13/16
D20/25/32
D1,6
Let-Through Current
Prospective Short-Circuit Current
I201_19082
max
p
C0,3
C0,5
C1
C2
C6
C8
C3/4
C16
C50/63
C32/40
C10/13
C20/25
C1,6
5000
4000
3000
2000
1000
0
0 1000 2000 3000 4000 5000 70006000
Let-Through Current
Prospective Short-Circuit Current
I201_19085
PH_03.book Seite 33 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
34 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Let-through I
2
t values 5SL3 (AC)
Characteristic B
Let-through I
2
t values 5SL4...-6 (AC)
Characteristic B
Characteristic C
Let-through I
2
t values 5SL4...-7 (AC)
Characteristic C
10 2
10 2
10 3
10 4
10 3
2
4
6
10 4
2
4
6
10 5
2
4
6
2468 8246
p
I201_18375
22
S
t
B50/63
B25/32/40
B20
B6
B10/13/16
Prospective Short-Circuit Current
Peak Let-Through Current
22
S
t
p
102
103
2
4
6
8
8
8
104
2
4
6
105
2
4
6
103
104
22466588
B2
B3
B4
B6
B8
B10
B13
B16
B20
B25
B50
B63
B32/40
B1
Let-Through Current
Prospective Short-Circuit Current
I201_19087
10
1
10
2
10
2
10
4
10
3
2
4
6
10
3
2
4
6
10
4
2
4
6
10
5
2
4
6
2468 8246
p
I201_18376
C25/32/40/50/63
C16/20
C8/10/13
C6
C3/4
C2
C1,6
C1
C0,5
C0,3
22
S
t
Prospective Short-Circuit Current
Peak Let-Through Current
22
S
t
p
100
101
8
6
102
103
104
4
2
8
6
4
2
8
6
4
2
8
6
4
2
8
6
4
2
2
105
103
104
224667 9588
C0,5
C1
C1,6
C2
C3
C4
C6
C8/10
C13/16
C20/25
C50/63
C32/40
C0,3
Let-Through Current
Prospective Short-Circuit Current
I201_19088
PH_03.book Seite 34 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
35
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Let-through I
2
t values 5SL4...-8 (AC)
Characteristic D
Let-through I
2
t values 5SL6 (AC)
Characteristic B Characteristic C
22
S
t
D0,5
D1
D1,6
D2
D3
D4
D6
D8/10
D13/16
D20/25
D50/63
D32/40
D0,3
p
Let-Through Current
Prospective Short-Circuit Current
10 0
10 3
10 1
10 4
8
6
10 2
10 3
10 4
4
2
8
6
4
2
8
6
4
2
8
6
4
2
8
6
4
2
2
10 5
224667 9588
I201_19089
210
2
64810
3
264810
p
[A]
2
10
2
4
6
8
3
10
2
4
10
4
6
8
2
5
10
4
6
8
[A s]
2
2
I201_18186
50/63
25/32/40
20
10/13/16
6
4
[A s]
2
210 264810
3264810
p[A]
1
10
2
4
6
8
2
10
2
3
10
4
6
8
2
4
10
4
6
8
2
5
10
4
6
8
2
I201_18185
25/32/40/50/63
16/20
8/10/13
6
3/4
2
1,6
1
0,5
0,3
4
PH_03.book Seite 35 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
36 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Let-through I
2
t values 5SY6 (AC)
Characteristic B Characteristic C
24
610
p[kA]
2
[kA s]
10
2
I201_10761
50/63 A
25/32/40 A
13/16/20 A
10 A
6 A
-1 2468
1001
824
6102
8
10-1
2
4
6
100
2
4
6
101
2
4
6
102
p[kA]
2[kA s]
2
I201_10762
50/63 A
13/16 A
20/25/32/40 A
8/10 A
6 A
3/4 A
2 A
0,5 A
0,3 A
1 A
1,6 A
2
4
6
10-1
2
4
6
100
2
4
6
101
2
4
6
102
2461010-2 246810
-1 246810
01
82
4610
2
8
10-2
PH_03.book Seite 36 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
37
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Let-through I
2
t values 5SY4 (AC)
Characteristic A
Characteristic C
Characteristic B
Characteristic D
2
p[kA]
2
[kA s]
2
4610
I201_10764
1 A
10
63 A
10 A
1,6 A
2 A
3 A
4 A
6/8 A
32/40/50 A
13/16/20/25 A
-2 246810
-1 246810
01
82
4610
2
8
10 -2
2
4
6
10 -1
2
4
6
10 0
2
4
6
10 1
2
4
6
10 2
Prospective Short-Circuit Current
Let-Through Current
-2 2
8
6
4
28 10
108642
-1
10864210 1010
6
4
2
6
4
2
6
4
2
6
4
2
2
10
1
10
0
10
-1
10
-2
10
6
4
2
I2_10766a
[kA]
p
22
[kA s]
0,3 A
0,5 A
1,6 A
2 A
3/4 A
6 A
8/10 A
13/16 A
1 A
50/63 A
80 A 20/25/32/40 A
10 -2
10 -1
10 -1
2
4
6
10 0
2
4
6
10 1
2
4
6
10 2
2
4
6
p
k
I201_18538a
22
s
tk
10 1
10 0
2468 8
24426
Prospective Short-Circuit Current
Let-Through Current
B2
B4
B6
B10
B13/16/20
B25/32/40
B50/63
B80
2
p[kA]
2
[kA s]
2
4610 10
2
4
6
I201_10767
10 2 4 6
40/50/63 A
25 A
8/10/13 A
6 A
4 A
3 A
1,6 A
0,5 A
0,3 A
20 A
16 A
2 A
1 A
32 A
-2 810
-1 246810
01
82
468 2
10-2
10-1
100
101
102
103
2
4
6
2
4
6
2
4
6
2
4
6
Prospective Short-Circuit Current
Let-Through Current
PH_03.book Seite 37 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
38 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Let-through I
2
t values 5SP4 (AC)
Characteristic B Characteristic C
I201_16016a
100101
468 2 468
101
102
103
2
4
6
2
4
6
100/125 A 80 A
I2_13
Ip [kA]
I2t [kA2s]
100 101468 2 468
101
10
103
2
4
6
2
4
6
80 A
100/125 A
Characteristic D
I2_13684
Ip [kA]
I2t [kA2s]
100101
468 2 468
101
102
103
2
4
6
2
4
6
80 A
100 A
PH_03.book Seite 38 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
39
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Let-through I
2
t values 5SY5 (DC)
Characteristic B Characteristic C
Let-through I
2
t values 5SY8 (AC)
Characteristic C Characteristic D
20/
A
[kA]
[k
p[kA]
2[kA s]
2
I2_10774
2 A
3/4 A
1,6 A
1 A
0,5 A
0,3 A
24
610
10-1 24
68
1008124
610
82
10-2
2
4
6
10-1
2
4
6
100
2
4
6
101
2
4
6
102
10 A
8 A
6 A
63 A
50 A
40 A
25/32 A
13/16 A
2
p[kA]
2[kA s]
2
610
I2_10771
10 4
0,3 A
13/16 A
20/25/32 A
50/63 A
8/10 A
6 A
1,6 A
0,5 A
1 A
3/4 A
2 A
40 A
-2 26410
-1
82 6410
0
81
82 61042
82 61043
8
10-2
2
4
6
10-1
2
4
6
100
2
4
6
101
2
4
6
102
2
4
6
103
I2_10772
p[kA]
2[kA s]
2
0,5 A
0,3 A
50/63 A
8/10 A
20 A
13/16 A
25 A
32 A
40 A
2 A
6 A
4 A
3 A
1 A
1,6 A
26
10
10 4
-2 26410
-1
826410
0
81
82 61042
82 61043
8
10
-2
2
4
6
10
-1
2
4
6
10
0
2
4
6
10
1
2
4
6
10
2
2
4
6
10
3
© Siemens AG 2016
40 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Let-through I
2
t values 5SY7 (AC)
Characteristic B
Characteristic C
Characteristic D
p
2
[kA]
2[kA s]
2
I2_10768
50/63 A 25/32/40 A
10 A
6 A
13/16/20 A
10 2 4 610
10
10 10
-1 2468
08124
68 2
-1
4
6
2
100
4
6
2
101
4
6
102
p[kA]
2[kA s]
2
2
I2_10769
2 A
3/4 A
6 A
20/25/32/40 A
1 A
1,6 A
0,5 A
0,3 A
8/10 A
13/16 A
50/63 A
261010 4
-2 26410
-1
82 6410
0
81
82 61042
8
10
-2
4
6
2
10
-1
4
6
2
10
0
4
6
2
10
1
4
6
10
2
p[kA]
2[kA s]
2
I2_10770
16 A
20 A
0,3 A
25 A
32 A
40/50/63 A
8/10/13 A
6 A
1,6 A
0,5 A
3 A
1 A
4 A
2 A
261010 4
-2 26410
-1
82 6410
0
81
82 61042
8
10-2
2
4
6
10
2
4
6
-1
10
2
4
6
0
10
2
4
6
1
10
2
4
6
2
103
© Siemens AG 2016
41
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Let-through I
2
t values 5SJ6...- . KS (AC)
Characteristic B Characteristic C
Let-through I
2
t values 5SY30 (AC)
Characteristic B Characteristic C
0,1
0,1 1 10
1
10
100
p
I201_18378
B10/13/16
22
S
t
B20
Let-through current
Prospective current
in kA
in
kA
C10/13
22
t
C16/20
S
I201_18377
p
100
10
1
1010,1
0,1
in kA
Prospective current
Let-through current in kA
2
s
2
Prospective Short-circuit Current
6
4
2
846
2
846
2
6
4
2
6
4
2
846
2
I201_18494
B40
B32
B20/25
B13/16
B10
B6
104
105
103
102
101102103104
2
s
2
101
Prospective Short-circuit Current
6
4
2
846
2
846
2
6
4
2
6
4
2
846
2
I201_18495
C2
C4
C6/8
C10/13
C16/20
C25/32/
40
104
105
103
102
102103104
PH_03.book Seite 41 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
42 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Let-through I
2
t values 5SY60 (AC)
Characteristic B Characteristic C
I201_13746b
102
101
100
10-1
32 A
20/25 A
13/ 16 A
10 A
6 A
p [kA]
2t [kA2s]
10-1 100101
2468 2468
2
4
6
8
2
4
6
8
2
4
6
8
40 A
102
101
100
10-1
25/32/
40 A
16/
20 A
10/
13 A
4 A
6 A
Ip [kA]
I2t [kA2s]
10-1 100101
2468 2468
2
4
6
8
2
4
6
8
2
4
6
8
2 A
I201_13747a
PH_03.book Seite 42 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
43
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity of miniature circuit breakers/fuses
Distribution systems are usually set up as radial networks. An
overcurrent protection device is required for each reduction of
the conductor cross-section. This produces a series connection
staggered according to rated currents, which should, if possible,
be "selective".
Selectivity means that, in the event of a fault, only the protective
device that is directly next to the fault in the current circuit is
tripped. This means that current paths in parallel can maintain a
power flow.
In the case of miniature circuit breakers with upstream fuses, the
selectivity limit depends largely on the current limitation and
tripping characteristics of the miniature circuit breaker and the
melting I2t value of the fuse.
This produces different selectivity limits for miniature circuit
breakers with different characteristics and rated breaking
capacity.
The following tables provide information on the short-circuit
currents up to which selectivity exists between miniature circuit
breakers and upstream fuses according to DIN VDE 0636-2. The
values specified in kA are limit values that were determined
under unfavorable test conditions. Under normal practical
conditions, you can often expect considerably better values,
depending on the upstream fuses.
In the event of a short-circuit, there is selectivity between the
5SY4, 5SY7, 5SP4, 5SJ4...-.HG.. miniature circuit breakers and
melting fuses according to DIN VDE 0636-2 up to the specified
values in kA.
Selectivity limit values of 3NA miniature circuit breakers/fuses in kA, operational class gG
Downstream miniature circuit
breakers
Upstream fuses
I
n
[A]
1)
16 A 20 A 25 A 35 A 50 A 63 A 80 A 100 A 125 A
5SY6 (without 5SY60)
Characteristic B 6 0.3 0.4 0.7 1.2 3.0 3.2 T T --
10 -- 0.4 0.6 1.0 2.2 3.0 5.0 T--
13 -- -- 0.5 1.0 2.2 3.0 5.0 T--
16 -- -- -- 1.0 2.0 2.4 4.0 T--
20 -- -- -- -- 2.0 2.4 4.0 T--
25 -- -- -- -- -- 2.0 3.5 T--
32 -- -- -- -- -- 1.7 2.0 T--
40 -- -- -- -- -- -- 2.0 4.0 --
50 -- -- -- -- -- -- -- 4.0 --
Characteristic C ≤ 2 0.3 0.5 1.2 1.7 T T T T --
30.3 0.4 0.8 1.4 4.0 5.0 T T --
40.3 0.4 0.6 1.1 3.0 4.0 T T --
6-- 0.4 0.6 1.0 2.4 3.2 T T --
8-- -- 0.5 0.9 1.4 2.6 3.1 T--
10 -- -- 0.5 0.9 1.4 2.1 3.1 T--
13 -- -- -- 0.8 1.3 2.0 3.0 T--
16 -- -- -- 0.8 1.3 2.0 3.0 T--
20 -- -- -- -- 1.3 2.0 2.7 T--
25 -- -- -- -- -- 2.0 2.4 5.0 --
32 -- -- -- -- -- -- 2.2 4.0 --
40 -- -- -- -- -- -- -- 3.5 --
50 -- -- -- -- -- -- -- 3.0 --
63 -- -- -- -- -- -- -- 3.0 --
5SY4...-5, -6, 5SY7...-6, 5SJ4...-6HG40
2)
Characteristic A, B 6 0.3 0.4 0.8 1.4 3.2 4.5 9.0 T T
10 -- 0.4 0.7 1.2 2.5 3.5 5.0 T T
13 -- -- 0.7 1.2 2.5 3.5 5.0 T T
16 -- -- -- 1.0 2.0 2.8 4.2 9.0 T
20 -- -- -- 1.0 2.0 2.6 4.2 9.0 T
25 -- -- -- -- 1.7 2.2 3.7 7.0 T
32 -- -- -- -- 1.7 2.2 3.7 7.0 6.0
40 -- -- -- -- -- 1.6 2.2 4.0 6.0
50 -- -- -- -- -- -- 2.2 4.0 6.0
63 -- -- -- -- -- -- -- 3.0 5.0
5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
2)
Characteristic C ≤ 2 0.3 0.5 1.5 2.0 9.0 T T T T
30.3 0.4 1.1 1.6 5.0 6.0 T T T
40.3 0.4 0.9 1.4 3.5 5.0 9.0 T T
6-- 0.4 0.8 1.4 2.7 4.5 6.0 T T
8-- -- 0.6 1.2 2.2 3.5 5.0 7.0 T
10 -- -- 0.5 1.2 2.0 3.0 4.2 7.0 T
13 -- -- -- 1.0 1.6 2.4 3.4 6.0 T
16 -- -- -- 1.0 1.5 2.2 3.0 6.0 T
20 -- -- -- -- 1.3 2.2 3.0 6.0 T
25 -- -- -- -- -- 2.2 2.9 5.0 9.0
32 -- -- -- -- -- -- 2.4 4.0 7.0
40 -- -- -- -- -- -- 2.0 3.5 4.0
50 -- -- -- -- -- -- -- 3.0 4.0
63 -- -- -- -- -- -- -- 3.0 3.5
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %. The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
PH_03.book Seite 43 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
44 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
2)
Characteristic D ≤ 2 0.3 0.4 1.0 1.8 5.0 7.0 T T T
30.3 0.4 0.9 1.5 4.0 5.0 8.0 T T
4-- 0.4 0.8 1.2 3.0 3.8 5.5 T T
6-- -- 0.7 1.1 2.5 3.1 4.4 8.1 T
8-- -- -- 0.9 2.1 2.5 3.5 6.2 9.3
10 -- -- -- -- 2.1 2.5 3.5 6.2 9.3
13 -- -- -- -- -- 2.5 3.5 6.2 9.3
16 -- -- -- -- -- 2.2 3.1 5.1 7.5
20 -- -- -- -- -- -- 2.7 4.3 6.3
25 -- -- -- -- -- -- -- 4.0 5.7
32 -- -- -- -- -- -- -- 4.0 5.5
40 -- -- -- -- -- -- -- 3.5 4.8
50 -- -- -- -- -- -- -- -- 4.0
63 -- -- -- -- -- -- -- -- --
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 000
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
6--- --- 0.1 0.2 0.4 0.7 11.2 1.6 23.2 T T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.8 2.9 T T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.8 2.8 T T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.3 4.2 T T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.2 4 T T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.4 2.2 3.9 T T
32 --- --- --- --- --- --- --- 0.9 1.1 1.4 1.9 3.2 3.9 T
40 --- --- --- --- --- --- --- --- 1.2 1.5 2.2 3.9 T T
50 --- --- --- --- --- --- --- --- --- 1.3 1.9 3.3 4 T
63 --- --- --- --- --- --- --- --- --- --- 1.8 3.1 3.8 T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 0.1 0.1 0.7 1.5 T T T T T T T T T T
0.5 0.1 0.1 0.7 1.5 T T T T T T T T T T
10.1 0.3 0.6 1.4 T T T T T T T T T
1.6 0.2 0.3 0.7 1.3 2.3 3.4 T T T T T T
20.1 0.3 0.6 11.5 22.7 3.5 T T T T
30.1 0.3 0.5 0.9 1.3 1.6 2.2 2.9 T T T T
40.1 0.2 0.5 0.9 1.2 1.6 2.1 2.8 T T T T
60.1 0.2 0.4 0.7 11.2 1.6 23.2 T T T
80.1 0.2 0.4 0.7 0.9 1.1 1.5 1.9 3 T T T
10 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.8 2.9 T T T
13 0.4 0.6 0.9 1.1 1.4 1.8 2.8 T T T
16 0.3 0.5 0.7 0.9 1.2 1.5 2.3 4.2 T T
20 0.3 0.5 0.7 0.9 1.2 1.5 2.2 4 T T
25 0.5 0.7 0.9 1.1 1.4 2.2 3.9 T T
32 --- --- 0.9 1.1 1.4 1.9 3.2 3.9 T
40 --- --- --- 1.2 1.5 2.2 3.9 T T
50 --- --- --- --- 1.3 1.9 3.3 4 T
63 --- --- --- --- --- 1.8 3.1 3.8 T
Downstream miniature circuit
breakers
Upstream fuses
I
n
[A]
1)
16 A 20 A 25 A 35 A 50 A 63 A 80 A 100 A 125 A
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %. The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
PH_03.book Seite 44 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
45
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 00
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
611.6 23.2 T T T
10 0.9 1.4 1.8 2.9 T T T
13 0.9 1.4 1.8 2.8 T T T
16 0.7 1.2 1.5 2.3 4.1 T T
20 0.7 1.2 1.5 2.2 4 T T
25 0.7 1.2 1.4 2.2 3.8 T T
32 --- 1.1 1.4 1.9 3.2 4.4 T
40 --- 1.2 1.5 2.2 3.8 T T
50 --- --- 1.3 1.9 3.2 T T
63 --- --- --- 1.8 34.3 T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 TTTTTTT
0.5 TTTTTTT
1TTTTTTT
1.6 2.3 T T T T T T
21.5 2.8 3.5 T T T T
31.3 2.2 2.9 T T T T
41.2 2.2 2.8 T T T T
611.6 23.2 T T T
80.9 1.5 1.9 3 T T T
10 0.9 1.4 1.8 2.9 T T T
13 0.9 1.4 1.8 2.8 T T T
16 0.7 1.2 1.5 2.3 4.1 T T
20 0.7 1.2 1.5 2.2 4 T T
25 0.7 1.2 1.4 2.2 3.8 T T
32 --- 1.1 1.4 1.9 3.2 4.4 T
40 --- 1.2 1.5 2.2 3.8 T T
50 --- --- 1.3 1.9 3.2 T T
63 --- --- --- 1.8 34.3 T
PH_03.book Seite 45 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
46 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 0
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
6--- --- 0.1 0.2 0.4 0.7 11.2 1.6 1.9 3.1 T T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.7 2.8 T T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.6 2.8 T T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.4 2.2 4 T T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.1 1.3 2.2 3.8 T T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.3 2.1 3.7 T T
32 --- --- --- --- --- --- --- 0.9 1.1 1.3 1.9 3.1 4.4 T
40 --- --- --- --- --- --- --- --- 1.2 1.4 2.2 3.7 T T
50 --- --- --- --- --- --- --- --- --- 1.2 1.8 3.1 T T
63 --- --- --- --- --- --- --- --- --- --- 1.7 2.9 4.3 T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 0.1 0.3 11.8 T T T T T T T T T T
0.5 0.1 0.3 11.8 T T T T T T T T T T
1--- 0.1 0.4 0.7 1.4 T T T T T T T T T
1.6 --- 0.1 0.2 0.3 0.7 1.3 2.3 3.4 T T T T T T
2--- 0.1 0.2 0.3 0.6 11.5 22.7 3.2 T T T T
3--- 0.1 0.2 0.3 0.5 0.9 1.3 1.6 2.2 2.6 T T T T
4--- 0.1 0.2 0.3 0.5 0.9 1.2 1.6 2.1 2.5 4.4 T T T
6--- --- 0.1 0.2 0.4 0.7 11.2 1.6 1.9 3.1 T T T
8--- --- 0.1 0.2 0.4 0.7 0.9 1.1 1.5 1.8 2.9 T T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.7 2.8 T T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.6 2.8 T T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.4 2.2 4 T T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.1 1.3 2.2 3.8 T T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.3 2.1 3.7 T T
32 --- --- --- --- --- --- --- 0.9 1.1 1.3 1.9 3.1 4.4 T
40 --- --- --- --- --- --- --- --- 1.2 1.4 2.2 3.7 T T
50 --- --- --- --- --- --- --- --- --- 1.2 1.8 3.1 T T
63 --- --- --- --- --- --- --- --- --- --- 1.7 2.9 4.3 T
PH_03.book Seite 46 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
47
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 1
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
16 20 25 35 40 50 63 80 100 125 160 200 224 250
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
60.1 0.2 0.4 0.9 11.6 1.9 3.1 T T T T T T
10 0.1 0.2 0.4 0.8 11.4 1.7 2.8 T T T T T T
13 --- --- 0.4 0.8 11.4 1.6 2.8 T T T T T T
16 --- --- 0.3 0.7 0.8 1.2 1.4 2.2 4 T T T T T
20 --- --- 0.3 0.7 0.8 1.1 1.3 2.2 3.8 T T T T T
25 --- --- --- 0.7 0.8 1.1 1.3 2.1 3.7 T T T T T
32 --- --- --- --- 0.8 1.1 1.3 1.9 3.1 4.3 T T T T
40 --- --- --- --- --- 1.2 1.4 2.2 3.7 T T T T T
50 --- --- --- --- --- --- 1.2 1.8 3.1 T T T T T
63 --- --- --- --- --- --- --- 1.7 2.9 4.3 T T T T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 0.7 1.6 T T T T T T T T T T T T
0.5 0.7 1.6 T T T T T T T T T T T T
10.3 0.6 1.4 T T T T T T T T T T T
1.6 0.2 0.3 0.7 22.5 T T T T T T T T T
20.2 0.3 0.6 1.4 1.7 2.7 3.2 T T T T T T T
30.1 0.3 0.5 1.2 1.4 2.2 2.6 T T T T T T T
40.1 0.2 0.5 1.1 1.3 2.1 2.5 4.4 T T T T T T
60.1 0.2 0.4 0.9 11.6 1.9 3.1 T T T T T T
80.1 0.2 0.4 0.9 11.5 1.8 2.9 T T T T T T
10 0.1 0.2 0.4 0.8 11.4 1.7 2.8 T T T T T T
13 --- --- 0.4 0.8 11.4 1.6 2.8 T T T T T T
16 --- --- 0.3 0.7 0.8 1.2 1.4 2.2 4 T T T T T
20 --- --- 0.3 0.7 0.8 1.1 1.3 2.2 3.8 T T T T T
25 --- --- --- 0.7 0.8 1.1 1.3 2.1 3.7 T T T T T
32 --- --- --- --- 0.8 1.1 1.3 1.9 3.1 4.3 T T T T
40 --- --- --- --- --- 1.2 1.4 2.2 3.7 T T T T T
50 --- --- --- --- --- --- 1.2 1.8 3.1 T T T T T
63 --- --- --- --- --- --- --- 1.7 2.9 4.3 T T T T
PH_03.book Seite 47 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
48 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 2
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160 200 224 250 300 315 355 400
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
60.9 1.6 1.9 3.1 T T T T T T T T T T
10 0.9 1.4 1.7 2.8 T T T T T T T T T T
13 0.9 1.4 1.7 2.8 T T T T T T T T T T
16 0.7 1.2 1.4 2.2 3.9 T T T T T T T T T
20 0.7 1.1 1.4 2.2 3.7 T T T T T T T T T
25 0.7 1.1 1.4 2.1 3.6 T T T T T T T T T
32 --- 1.1 1.3 1.9 34.3 T T T T T T T T
40 --- 1.2 1.4 2.2 3.6 T T T T T T T T T
50 --- --- 1.2 1.8 3.1 T T T T T T T T T
63 --- --- --- 1.7 2.9 4.2 T T T T T T T T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T
1T T T T T T T T T T T T T T
1.6 2.2 TTTTTTTTTTTTT
21.5 2.7 3.3 T T T T T T T T T T T
31.3 2.2 2.7 T T T T T T T T T T T
41.2 2.1 2.6 4.4 T T T T T T T T T T
60.9 1.6 1.9 3.1 T T T T T T T T T T
80.9 1.5 1.8 2.9 T T T T T T T T T T
10 0.9 1.4 1.7 2.8 T T T T T T T T T T
13 0.9 1.4 1.7 2.8 T T T T T T T T T T
16 0.7 1.2 1.4 2.2 3.9 T T T T T T T T T
20 0.7 1.1 1.4 2.2 3.7 T T T T T T T T T
25 0.7 1.1 1.4 2.1 3.6 T T T T T T T T T
32 --- 1.1 1.3 1.9 34.3 T T T T T T T T
40 --- 1.2 1.4 2.2 3.6 T T T T T T T T T
50 --- --- 1.2 1.8 3.1 T T T T T T T T T
63 --- --- --- 1.7 2.9 4.2 T T T T T T T T
PH_03.book Seite 48 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
49
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 3
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
200 224 250 300 315 355 400 425 500 630
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
6TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 TTTTTTTTTT
0.5 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
PH_03.book Seite 49 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
50 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 44a
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
630 800 1000 1250 500 630 800 1000 1250
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
6T T T T T T T T T
10 T T T T T T T T T
13 T T T T T T T T T
16 T T T T T T T T T
20 T T T T T T T T T
25 T T T T T T T T T
32 T T T T T T T T T
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 T T T T T T T T T
0.5 T T T T T T T T T
1T T T T T T T T T
1.6 T T T T T T T T T
2T T T T T T T T T
3T T T T T T T T T
4T T T T T T T T T
6T T T T T T T T T
8T T T T T T T T T
10 T T T T T T T T T
13 T T T T T T T T T
16 T T T T T T T T T
20 T T T T T T T T T
25 T T T T T T T T T
32 T T T T T T T T T
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
PH_03.book Seite 50 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
51
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 000
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1--- --- 6.9 T T T T T T T T T T T
2--- --- --- 0.5 2.4 T T T T T T T T T
3--- --- --- --- 0.9 2.3 5.4 T T T T T T T
4--- --- --- --- 0.7 1.2 1.9 2.6 4.3 6.3 T T T T
6--- --- --- --- 0.6 0.9 1.5 22.8 4.1 8.7 T T T
8--- --- --- --- 0.5 0.9 1.3 1.7 2.4 3.2 5.8 T T T
10 --- --- --- --- 0.5 0.8 1.2 1.5 22.6 4.6 T T T
13 --- --- --- --- 0.4 0.7 1.1 1.4 1.8 2.3 3.9 8.6 T T
16 --- --- --- --- --- 0.7 0.9 1.2 1.6 2.1 3.2 6.3 8.2 T
20 --- --- --- --- --- 0.6 0.9 1.1 1.5 1.9 2.9 6.1 7.2 T
25 --- --- --- --- --- 0.6 0.9 1.1 1.4 1.8 2.8 5.5 6.7 T
32 --- --- --- --- --- --- --- 0.9 1.2 1.6 2.4 4.5 5.9 T
40 --- --- --- --- --- --- --- --- 1.2 1.6 2.4 4.5 5.1 T
50 --- --- --- --- --- --- --- --- --- 1.4 23.6 4.6 8.6
63 --- --- --- --- --- --- --- --- --- --- 1.9 3.3 4.1 7.1
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- --- T T T T T T T T T T T T
0.5 --- --- T T T T T T T T T T T T
1--- --- --- 13.3 T T T T T T T T T
1.6 --- --- --- --- 1.1 3.2 T T T T T T T T
2---- ---- ---- ---- 0.7 1.5 2.5 3.9 5.8 T T T T T
3--- --- --- --- 0.6 1.1 1.7 2.4 3.7 5.7 T T T T
4--- --- --- --- 0.6 0.9 1.5 22.9 4.1 7.8 T T T
6--- --- --- --- 0.5 0.8 1.2 1.5 2.1 2.8 5.2 T T T
8---- ---- ---- ---- ---- 0.6 0.8 1.1 1.4 1.8 2.8 7.1 9.9 T
10 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.8 2.8 7.1 9.9 T
13 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.8 2.8 5.9 7 T
16 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.8 2.8 5.9 7 T
20 ---- ---- ---- ---- ---- 0.5 0.8 0.9 1.2 1.6 2.4 4.6 6 T
25 --- --- --- --- --- 0.5 0.8 0.9 1.2 1.6 2.4 4.6 6 T
32 --- --- --- --- --- --- --- 0.8 1.1 1.4 2.1 4.1 5.3 T
40 --- --- --- --- --- --- --- --- 1.1 1.4 2.1 4.2 5.3 9.7
50 ---- ---- ---- ---- ---- ---- ---- ---- ---- 1.2 23.6 4.3 7.1
63 --- --- --- --- --- --- --- --- --- --- 23.6 4.3 7.1
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 --- --- T T T T T T T T T T T T
0.5 --- --- T T T T T T T T T T T T
1--- --- --- 0.5 1.4 4.7 T T T T T T T T
1.6 --- --- --- --- 0.9 1.6 2.7 4.2 7.4 T T T T T
2---- ---- ---- ---- 0.6 1.3 2.1 2.7 4.1 7.1 T T T T
3--- --- --- --- 0.6 11.5 22.8 4.1 8.4 T T T
4--- --- --- --- 0.5 0.8 1.3 1.7 2.3 3.2 5.6 T T T
6--- --- --- --- --- 0.7 11.3 1.9 2.5 4.2 T T T
8---- ---- ---- ---- ---- 0.5 0.7 0.8 1.1 1.5 2.4 5.4 7.2 T
10 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.5 2.4 5.4 7.2 T
13 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.5 2.4 4.6 6.1 T
16 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.5 2.4 4.6 6.1 T
20 ---- ---- ---- ---- ---- 0.4 0.6 0.8 11.4 2.2 4.3 5.5 T
25 --- --- --- --- --- 0.4 0.6 0.8 11.4 2.2 4.3 5.5 T
32 --- --- --- --- --- --- --- 0.8 1.1 1.5 2.3 4.4 5.5 T
40 --- --- --- --- --- --- --- --- 0.9 1.2 1.9 3.7 4.7 8.8
50 --- --- --- --- --- --- ---- --- --- --- 1.6 2.9 3.7 6.6
63 --- --- --- --- --- --- --- --- --- --- 1.6 2.9 3.7 6.6
PH_03.book Seite 51 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
52 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 00
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTT
2TTTTTTT
35.4 T T T T T T
41.9 4.5 6.3 T T T T
61.5 2.9 4.1 8.6 T T T
81.3 2.4 3.2 5.8 T T T
10 1.2 22.6 4.6 T T T
13 1.1 1.9 2.3 3.9 8.3 T T
16 0.9 1.7 2.1 3.2 6.2 T T
20 0.9 1.5 1.9 2.9 68.5 T
25 0.9 1.4 1.8 2.8 5.4 7.4 T
32 --- 1.3 1.6 2.4 4.4 6.5 T
40 --- 1.2 1.6 2.4 4.5 5.5 T
50 --- --- 1.4 23.5 5.3 8.3
63 --- --- --- 1.9 3.3 4.7 7
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTT
0.5 TTTTTTT
1TTTTTTT
1.6 TTTTTTT
22.5 6 T T T T T
31.7 3.9 5.7 T T T T
41.5 34.1 7.8 T T T
61.2 2.1 2.8 5.2 T T T
80.8 1.4 1.8 2.8 7 T T
10 0.8 1.4 1.8 2.8 7 T T
13 0.8 1.4 1.8 2.8 5.7 8.3 T
16 0.8 1.4 1.8 2.8 5.7 8.3 T
20 0.8 1.3 1.6 2.4 4.5 6.6 T
25 0.8 1.3 1.6 2.4 4.5 6.6 T
32 --- 1.1 1.4 2.1 46.1 9.9
40 --- 1.1 1.4 2.1 4.1 69.4
50 --- --- 1.2 23.6 4.9 7
63 --- --- --- 23.6 4.9 7
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTT
0.5 TTTTTTT
1TTTTTTT
1.6 2.7 9.5 T T T T T
22.1 4.2 7.1 T T T T
31.5 2.9 4.1 8.4 T T T
41.3 2.4 3.2 5.6 T T T
611.9 2.5 4.2 T T T
80.7 1.2 1.5 2.4 5.3 9.6 T
10 0.7 1.2 1.5 2.4 5.3 9.6 T
13 0.7 1.2 1.5 2.4 4.5 6.8 T
16 0.7 1.2 1.5 2.4 4.5 6.8 T
20 0.6 1.1 1.4 2.2 4.2 6.2 T
25 0.6 1.1 1.4 2.2 4.2 6.2 T
32 --- 1.1 1.5 2.3 4.3 6.2 T
40 --- 0.9 1.2 1.9 3.6 5.5 8.5
50 --- --- --- 1.6 2.8 4.3 6.5
63 --- --- --- 1.6 2.8 4.3 6.5
PH_03.book Seite 52 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
53
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 0
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1--- --- T T T T T T T T T T T T
2--- --- --- 0.6 2.4 T T T T T T T T T
3--- --- --- --- 0.9 2.3 5.4 T T T T T T T
4--- --- --- --- 0.7 1.2 1.9 2.6 4.2 5.5 T T T T
6--- --- --- --- 0.6 0.9 1.5 22.8 3.6 8.1 T T T
8--- --- --- --- 0.5 0.9 1.3 1.7 2.3 2.9 5.6 T T T
10 --- --- --- --- 0.5 0.8 1.2 1.5 22.4 4.4 T T T
13 --- --- --- --- 0.4 0.7 1.1 1.4 1.8 2.1 3.8 7.7 T T
16 --- --- --- --- --- 0.7 0.9 1.2 1.6 1.9 3.2 6 T T
20 --- --- --- --- --- 0.6 0.9 1.1 1.4 1.7 2.9 5.7 8.5 T
25 --- --- --- --- --- 0.6 0.9 1.1 1.4 1.6 2.7 5.1 7.4 T
32 --- --- --- --- --- --- --- 0.9 1.2 1.5 2.3 4.2 6.5 T
40 --- --- --- --- --- --- --- --- 1.2 1.4 2.3 4.3 5.4 T
50 --- --- --- --- --- --- --- --- --- 1.3 23.4 5.3 8.6
63 --- --- --- --- --- --- --- --- --- --- 1.8 3.1 4.7 7.2
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- --- T T T T T T T T T T T T
0.5 --- --- T T T T T T T T T T T T
1--- --- 0.5 1.1 3.3 T T T T T T T T T
1.6 --- --- --- 0.4 1.1 3.2 T T T T T T T T
2--- --- --- --- 0.7 1.5 2.5 3.9 5.7 9.4 T T T T
3--- --- --- --- 0.6 1.1 1.7 2.4 3.6 4.9 T T T T
4--- --- --- --- 0.6 0.9 1.5 22.9 3.7 7.4 T T T
6--- --- --- --- 0.5 0.8 1.2 1.5 22.5 5 T T T
8--- --- --- --- --- 0.6 0.8 1.1 1.4 1.7 2.7 6.7 T T
10 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.7 2.7 6.7 T T
13 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.7 2.7 5.2 8.2 T
16 --- --- --- --- --- 0.6 0.8 1.1 1.4 1.7 2.7 5.2 8.2 T
20 --- --- --- --- --- 0.5 0.8 0.9 1.2 1.4 2.3 4.3 6.6 T
25 --- --- --- --- --- 0.5 0.8 0.9 1.2 1.4 2.3 4.3 6.6 T
32 --- --- --- --- --- --- --- 0.8 1.1 1.3 2.1 3.8 6.1 T
40 --- --- --- --- --- --- --- --- 11.3 2.1 3.9 69.7
50 --- --- --- --- --- --- --- --- --- 1.1 1.9 3.4 4.9 7.1
63 --- --- --- --- --- --- --- --- --- --- 1.9 3.4 4.9 7.1
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- 0.5 T T T T T T T T T T T T
0.5 --- 0.5 T T T T T T T T T T T T
1--- --- 0.4 0.5 1.4 4.7 T T T T T T T T
1.6 --- --- --- --- 0.9 1.6 2.7 4.2 7.3 T T T T T
2--- --- --- --- 0.6 1.3 2.1 2.7 46.5 T T T T
3--- --- --- --- 0.6 11.5 22.8 3.6 7.8 T T T
4--- --- --- --- 0.5 0.8 1.3 1.7 2.3 2.8 5.5 T T T
6--- --- --- --- --- 0.7 11.3 1.8 2.3 4.1 T T T
8--- --- --- --- --- 0.5 0.7 0.8 1.1 1.4 2.3 59.5 T
10 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.4 2.3 59.5 T
13 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.4 2.3 4.3 6.7 T
16 --- --- --- --- --- 0.5 0.7 0.8 1.1 1.4 2.3 4.3 6.7 T
20 --- --- --- --- --- 0.4 0.6 0.8 11.3 2.1 46.2 T
25 --- --- --- --- --- 0.4 0.6 0.8 11.3 2.1 46.2 T
32 --- --- --- --- --- --- --- 0.8 1.1 1.3 2.2 4.1 6.2 T
40 --- --- --- --- --- --- --- --- 0.9 1.1 1.9 3.5 5.5 8.8
50 --- --- --- --- --- --- --- --- --- --- 1.6 2.7 4.3 6.6
63 --- --- --- --- --- --- --- --- --- --- 1.6 2.7 4.3 6.6
PH_03.book Seite 53 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
54 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 1
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
16 20 25 35 40 50 63 80 100 125 160 200 224 250
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
19 T T T T T T T T T T T T T
2--- 0.5 2.4 T T T T T T T T T T T
3--- --- 0.9 4.4 7.1 T T T T T T T T T
4--- --- 0.7 1.7 2.1 4.2 5.5 T T T T T T T
6--- --- 0.6 1.4 1.7 2.8 3.6 8.1 T T T T T T
8--- --- 0.5 1.2 1.4 2.3 2.9 5.6 T T T T T T
10 --- --- 0.5 1.1 1.3 22.4 4.4 T T T T T T
13 --- --- 0.4 11.2 1.8 2.1 3.8 7.7 T T T T T
16 --- --- --- 0.9 11.6 1.9 3.2 6 T T T T T
20 --- --- --- 0.8 11.4 1.7 2.9 5.7 8.5 T T T T
25 --- --- --- 0.8 0.9 1.4 1.6 2.7 5.1 7.4 T T T T
32 --- --- --- --- 0.8 1.2 1.5 2.3 4.2 6.5 T T T T
40 --- --- --- --- --- 1.2 1.4 2.3 4.3 5.4 T T T T
50 --- --- --- --- --- --- 1.3 23.4 5.3 8.6 T T T
63 --- --- --- --- --- --- --- 1.8 3.1 4.7 7.2 T T T
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T
1--- 13.3 T T T T T T T T T T T
1.6 --- 0.4 1.1 T T T T T T T T T T T
2--- --- 0.7 2.2 2.8 5.7 9.4 T T T T T T T
3--- --- 0.6 1.5 1.9 3.6 4.9 T T T T T T T
4--- --- 0.6 1.3 1.6 2.9 3.7 7.4 T T T T T T
6--- --- 0.5 1.1 1.3 22.5 5 T T T T T T
8--- --- --- 0.8 0.9 1.4 1.7 2.7 6.7 T T T T T
10 --- --- --- 0.8 0.9 1.4 1.7 2.7 6.7 T T T T T
13 --- --- --- 0.8 0.9 1.4 1.7 2.7 5.2 8.2 T T T T
16 --- --- --- 0.8 0.9 1.4 1.7 2.7 5.2 8.2 T T T T
20 --- --- --- 0.7 0.8 1.2 1.4 2.3 4.3 6.6 T T T T
25 --- --- --- 0.7 0.8 1.2 1.4 2.3 4.3 6.6 T T T T
32 --- --- --- --- 0.7 1.1 1.3 2.1 3.8 6.1 T T T T
40 --- --- --- --- --- 11.3 2.1 3.9 69.7 T T T
50 --- --- --- --- --- --- 1.1 1.9 3.4 4.9 7.1 T T T
63 --- --- --- --- --- --- --- 1.9 3.4 4.9 7.1 T T T
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T
1--- 0.5 1.4 T T T T T T T T T T T
1.6 --- --- 0.9 2.4 37.3 T T T T T T T T
2--- --- 0.6 1.9 2.2 46.5 T T T T T T T
3--- --- 0.6 1.4 1.7 2.8 3.6 7.8 T T T T T T
4--- --- 0.5 1.1 1.4 2.3 2.8 5.5 T T T T T T
6--- --- --- 11.1 1.8 2.3 4.1 T T T T T T
8--- --- --- 0.6 0.7 1.1 1.4 2.3 59.5 T T T T
10 --- --- --- 0.6 0.7 1.1 1.4 2.3 59.5 T T T T
13 --- --- --- 0.6 0.7 1.1 1.4 2.3 4.3 6.7 T T T T
16 --- --- --- 0.6 0.7 1.1 1.4 2.3 4.3 6.7 T T T T
20 --- --- --- 0.6 0.7 11.3 2.1 46.2 T T T T
25 --- --- --- 0.6 0.7 11.3 2.1 46.2 T T T T
32 --- --- --- 0.7 1.1 1.3 2.2 4.1 6.2 T T T T
40 --- --- --- --- 0.9 1.1 1.9 3.5 5.5 8.8 T T T
50 --- --- --- --- --- --- 1.6 2.7 4.3 6.6 T T T
63 --- --- --- --- --- --- 1.6 2.7 4.3 6.6 T T T
PH_03.book Seite 54 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
55
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 2
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160 200 224 250 300 315 355 400
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1T T T T T T T T T T T T T T
2T T T T T T T T T T T T T T
35.1 TTTTTTTTTTTTT
41.8 4.2 5.8 T T T T T T T T T T T
61.5 2.8 3.8 8.1 T T T T T T T T T T
81.3 2.3 35.6 T T T T T T T T T T
10 1.1 22.5 4.4 T T T T T T T T T T
13 1.1 1.8 2.2 3.8 7.4 T T T T T T T T T
16 0.9 1.6 23.2 5.8 T T T T T T T T T
20 0.9 1.4 1.8 2.9 5.5 8.2 T T T T T T T T
25 0.8 1.4 1.7 2.7 4.9 7.3 T T T T T T T T
32 --- 1.2 1.5 2.3 4.1 6.4 T T T T T T T T
40 --- 1.2 1.5 2.3 4.2 5.4 T T T T T T T T
50 --- --- 1.3 23.3 5.2 8.6 T T T T T T T
63 --- --- --- 1.8 3.1 4.6 7.1 T T T T T T T
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T
1T T T T T T T T T T T T T T
1.6 T T T T T T T T T T T T T T
22.4 5.7 T T T T T T T T T T T T
31.6 3.6 5.2 T T T T T T T T T T T
41.4 2.9 3.8 7.4 T T T T T T T T T T
61.1 22.6 5 T T T T T T T T T T
80.8 1.4 1.7 2.7 6.5 T T T T T T T T T
10 0.8 1.4 1.7 2.7 6.5 T T T T T T T T T
13 0.8 1.4 1.7 2.7 57.9 T T T T T T T T
16 0.8 1.4 1.7 2.7 57.9 T T T T T T T T
20 0.7 1.2 1.5 2.3 4.2 6.5 T T T T T T T T
25 0.7 1.2 1.5 2.3 4.2 6.5 T T T T T T T T
32 --- 1.1 1.3 2.1 3.7 6 T T T T T T T T
40 --- 11.3 2.1 3.8 5.9 9.6 T T T T T T T
50 --- --- 1.2 1.9 3.4 4.8 7.1 T T T T T T T
63 --- --- --- 1.9 3.4 4.8 7.1 T T T T T T T
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T
1T T T T T T T T T T T T T T
1.6 2.6 7.3 T T T T T T T T T T T T
22 4 6.7 T T T T T T T T T T T
31.5 2.8 3.8 7.8 T T T T T T T T T T
41.2 2.3 35.5 T T T T T T T T T T
611.8 2.4 4.1 T T T T T T T T T T
80.7 1.1 1.4 2.3 4.9 9.1 T T T T T T T T
10 0.7 1.1 1.4 2.3 4.9 9.1 T T T T T T T T
13 0.7 1.1 1.4 2.3 4.2 6.6 T T T T T T T T
16 0.7 1.1 1.4 2.3 4.2 6.6 T T T T T T T T
20 0.6 11.3 2.1 3.9 6.1 T T T T T T T T
25 0.6 11.3 2.1 3.9 6.1 T T T T T T T T
32 --- 1.1 1.4 2.2 46.1 T T T T T T T T
40 --- 0.9 1.2 1.9 3.4 5.4 8.8 T T T T T T T
50 --- --- --- 1.6 2.6 4.2 6.6 T T T T T T T
63 --- --- --- 1.6 2.6 4.2 6.6 T T T T T T T
PH_03.book Seite 55 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
56 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 3
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
200 224 250 300 315 355 400 425 500 630
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTTT
0.5 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTT
0.5 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
PH_03.book Seite 56 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
57
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 44a
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
630 800 1000 1250 500 630 800 1000 1250
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTT
2TTTTTTTTT
3TTTTTTTTT
4TTTTTTTTT
6TTTTTTTTT
8TTTTTTTTT
10 TTTTTTTTT
13 TTTTTTTTT
16 TTTTTTTTT
20 TTTTTTTTT
25 TTTTTTTTT
32 TTTTTTTTT
40 TTTTTTTTT
50 TTTTTTTTT
63 TTTTTTTTT
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTT
0.5 TTTTTTTTT
1TTTTTTTTT
1.6 TTTTTTTTT
2TTTTTTTTT
3TTTTTTTTT
4TTTTTTTTT
6TTTTTTTTT
8TTTTTTTTT
10 TTTTTTTTT
13 TTTTTTTTT
16 TTTTTTTTT
20 TTTTTTTTT
25 TTTTTTTTT
32 TTTTTTTTT
40 TTTTTTTTT
50 TTTTTTTTT
63 TTTTTTTTT
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTT
0.5 TTTTTTTTT
1TTTTTTTTT
1.6 TTTTTTTTT
2TTTTTTTTT
3TTTTTTTTT
4TTTTTTTTT
6TTTTTTTTT
8TTTTTTTTT
10 TTTTTTTTT
13 TTTTTTTTT
16 TTTTTTTTT
20 TTTTTTTTT
25 TTTTTTTTT
32 TTTTTTTTT
40 TTTTTTTTT
50 TTTTTTTTT
63 TTTTTTTTT
PH_03.book Seite 57 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
58 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 000
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 10
6--- --- 0.1 0.2 0.4 0.7 11.2 1.6 23.2 T T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.8 2.9 5.4 T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.8 2.8 5.7 T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.3 4.2 5 T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.2 44.9 T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.4 2.2 3.9 4.8 T
32 --- --- --- --- --- --- --- 0.9 1.1 1.4 1.9 3.2 3.9 T
40 --- --- --- --- --- --- --- --- 1.2 1.5 2.2 3.9 4.7 T
50 --- --- --- --- --- --- --- --- --- 1.3 1.9 3.3 4 T
63 --- --- --- --- --- --- --- --- --- --- 1.8 3.1 3.8 T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 10
0.5 0.1 0.1 0.7 1.5 T T T T T T T T T T
1--- 0.1 0.3 0.6 1.4 4.9 T T T T T T T T
1.6 --- --- 0.2 0.3 0.7 1.3 2.3 3.4 T T T T T T
2--- --- 0.1 0.3 0.6 11.5 22.7 3.5 5.8 T T T
3--- --- 0.1 0.3 0.5 0.9 1.3 1.6 2.2 2.9 4.9 T T T
4--- --- 0.1 0.2 0.5 0.9 1.2 1.6 2.1 2.8 4.6 T T T
6--- --- 0.1 0.2 0.5 0.9 1.2 1.6 2.1 2.8 4.6 T T T
8--- --- 0.1 0.2 0.4 0.7 0.9 1.1 1.5 1.9 35.8 T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.8 2.9 5.4 T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.8 2.8 5.7 T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.3 4.2 5 T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.5 2.2 44.9 T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.4 2.2 3.9 4.8 T
32 --- --- --- --- --- --- --- 0.9 1.1 1.4 1.9 3.2 3.9 T
40 --- --- --- --- --- --- --- --- 1.2 1.5 2.2 3.9 4.7 T
50 --- --- --- --- --- --- --- --- --- 1.3 1.9 3.3 4 T
63 --- --- --- --- --- --- --- --- --- --- 1.8 3.1 3.8 T
PH_03.book Seite 58 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
59
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 00
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
611.6 23.2 T T T
10 0.9 1.4 1.8 2.9 5.2 T T
13 0.9 1.4 1.8 2.8 5.5 T T
16 0.7 1.2 1.5 2.3 4.1 5.5 T
20 0.7 1.2 1.5 2.2 45.5 T
25 0.7 1.2 1.4 2.2 3.8 5.3 T
32 --- 1.1 1.4 1.9 3.2 4.4 T
40 --- 1.2 1.5 2.2 3.8 5.5 T
50 --- --- 1.3 1.9 3.2 4.6 T
63 --- --- --- 1.8 34.3 T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 TTTTTTT
1TTTTTTT
1.6 2.3 TTTTTT
21.5 2.8 3.5 5.8 T T T
31.3 2.2 2.9 4.9 T T T
41.2 2.2 2.8 4.6 T T T
61.2 2.2 2.8 4.6 T T T
80.9 1.5 1.9 35.7 T T
10 0.9 1.4 1.8 2.9 5.2 T T
13 0.9 1.4 1.8 2.8 5.5 T T
16 0.7 1.2 1.5 2.3 4.1 5.5 T
20 0.7 1.2 1.5 2.2 45.5 T
25 0.7 1.2 1.4 2.2 3.8 5.3 T
32 --- 1.1 1.4 1.9 3.2 4.4 T
40 --- 1.2 1.5 2.2 3.8 5.5 T
50 --- --- 1.3 1.9 3.2 4.6 T
63 --- --- --- 1.8 34.3 T
PH_03.book Seite 59 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
60 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 0
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
6--- --- 0.1 0.2 0.4 0.7 11.2 1.6 1.9 3.1 T T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.7 2.8 5 T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.6 2.8 5.2 T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.4 2.2 45.5 T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.1 1.3 2.2 3.8 5.5 T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.3 2.1 3.7 5.3 T
32 --- --- --- --- --- --- --- 0.9 1.1 1.3 1.9 3.1 4.3 T
40 --- --- --- --- --- --- --- --- 1.2 1.4 2.2 3.7 5.4 T
50 --- --- --- --- --- --- --- --- --- 1.2 1.8 3.1 4.5 T
63 --- --- --- --- --- --- --- --- --- --- 1.7 2.9 4.3 T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 0.1 0.3 11.8 T T T T T T T T T T
1--- 0.1 0.4 0.7 1.4 4.9 T T T T T T T T
1.6 --- 0.1 0.2 0.3 0.7 1.3 2.3 3.4 T T T T T T
2--- 0.1 0.2 0.3 0.6 11.5 22.7 3.2 5.6 T T T
3--- 0.1 0.2 0.3 0.5 0.9 1.3 1.6 2.2 2.6 4.8 T T T
4--- 0.1 0.2 0.3 0.5 0.9 1.2 1.6 2.1 2.5 4.4 T T T
6--- 0.1 0.2 0.3 0.5 0.9 1.2 1.6 2.1 2.5 4.4 T T T
8--- --- 0.1 0.2 0.4 0.7 0.9 1.1 1.5 1.8 2.9 5.4 T T
10 --- --- 0.1 0.2 0.4 0.6 0.9 1.1 1.4 1.7 2.8 5 T T
13 --- --- --- --- 0.4 0.6 0.9 1.1 1.4 1.6 2.8 5.2 T T
16 --- --- --- --- 0.3 0.5 0.7 0.9 1.2 1.4 2.2 45.5 T
20 --- --- --- --- 0.3 0.5 0.7 0.9 1.1 1.3 2.2 3.8 5.5 T
25 --- --- --- --- --- 0.5 0.7 0.9 1.1 1.3 2.1 3.7 5.3 T
32 --- --- --- --- --- --- --- 0.9 1.1 1.3 1.9 3.1 4.3 T
40 --- --- --- --- --- --- --- --- 1.2 1.4 2.2 3.7 5.4 T
50 --- --- --- --- --- --- --- --- --- 1.2 1.8 3.1 4.5 T
63 --- --- --- --- --- --- --- --- --- --- 1.7 2.9 4.3 T
PH_03.book Seite 60 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
61
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 1
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
16 20 25 35 40 50 63 80 100 125 160 200 224 250
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
60.1 0.2 0.4 0.9 11.6 1.9 3.1 T T T T T T
10 0.1 0.2 0.4 0.8 11.4 1.7 2.8 5 T T T T T
13 --- --- 0.4 0.8 11.4 1.6 2.8 5.2 T T T T T
16 --- --- 0.3 0.7 0.8 1.2 1.4 2.2 45.5 T T T T
20 --- --- 0.3 0.7 0.8 1.1 1.3 2.2 3.8 5.5 T T T T
25 --- --- --- 0.7 0.8 1.1 1.3 2.1 3.7 5.3 T T T T
32 --- --- --- --- 0.8 1.1 1.3 1.9 3.1 4.3 T T T T
40 --- --- --- --- --- 1.2 1.4 2.2 3.7 5.4 T T T T
50 --- --- --- --- --- --- 1.2 1.8 3.1 4.5 T T T T
63 --- --- --- --- --- --- --- 1.7 2.9 4.3 T T T T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 0.7 1.6 T T T T T T T T T T T T
10.3 0.6 1.4 T T T T T T T T T T T
1.6 0.2 0.3 0.7 22.5 T T T T T T T T T
20.2 0.3 0.6 1.4 1.7 2.7 3.2 5.6 T T T T T T
30.1 0.3 0.5 1.2 1.4 2.2 2.6 4.8 T T T T T T
40.1 0.2 0.5 1.1 1.3 2.1 2.5 4.4 T T T T T T
60.1 0.2 0.5 1.1 1.3 2.1 2.5 4.4 T T T T T T
80.1 0.2 0.4 0.9 11.5 1.8 2.9 5.4 T T T T T
10 0.1 0.2 0.4 0.8 11.4 1.7 2.8 5 T T T T T
13 --- --- 0.4 0.8 11.4 1.6 2.8 5.2 T T T T T
16 --- --- 0.3 0.7 0.8 1.2 1.4 2.2 45.5 T T T T
20 --- --- 0.3 0.7 0.8 1.1 1.3 2.2 3.8 5.5 T T T T
25 --- --- --- 0.7 0.8 1.1 1.3 2.1 3.7 5.3 T T T T
32 --- --- --- --- 0.8 1.1 1.3 1.9 3.1 4.3 T T T T
40 --- --- --- --- --- 1.2 1.4 2.2 3.7 5.4 T T T T
50 --- --- --- --- --- --- 1.2 1.8 3.1 4.5 T T T T
63 --- --- --- --- --- --- --- 1.7 2.9 4.3 T T T T
PH_03.book Seite 61 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
62 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 2
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160 200 224 250 300 315 355 400
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
60.9 1.6 1.9 3.1 5.9 T T T T T T T T T
10 0.9 1.4 1.7 2.8 4.9 T T T T T T T T T
13 0.9 1.4 1.7 2.8 5 T T T T T T T T T
16 0.7 1.2 1.4 2.2 3.9 5.4 T T T T T T T T
20 0.7 1.1 1.4 2.2 3.7 5.4 T T T T T T T T
25 0.7 1.1 1.4 2.1 3.6 5.2 T T T T T T T T
32 --- 1.1 1.3 1.9 34.3 T T T T T T T T
40 --- 1.2 1.4 2.2 3.6 5.3 T T T T T T T T
50 --- --- 1.2 1.8 3.1 4.5 T T T T T T T T
63 --- --- --- 1.7 2.9 4.2 T T T T T T T T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 T T T T T T T T T T T T T T
1T T T T T T T T T T T T T T
1.6 2.2 TTTTTTTTTTTTT
21.5 2.7 3.3 5.6 T T T T T T T T T T
31.3 2.2 2.7 4.8 T T T T T T T T T T
41.2 2.1 2.6 4.4 T T T T T T T T T T
61.2 2.1 2.6 4.4 T T T T T T T T T T
80.9 1.5 1.8 2.9 5.3 T T T T T T T T T
10 0.9 1.4 1.7 2.8 4.9 T T T T T T T T T
13 0.9 1.4 1.7 2.8 5 T T T T T T T T T
16 0.7 1.2 1.4 2.2 3.9 5.4 T T T T T T T T
20 0.7 1.1 1.4 2.2 3.7 5.4 T T T T T T T T
25 0.7 1.1 1.4 2.1 3.6 5.2 T T T T T T T T
32 --- 1.1 1.3 1.9 34.3 T T T T T T T T
40 --- 1.2 1.4 2.2 3.6 5.3 T T T T T T T T
50 --- --- 1.2 1.8 3.1 4.5 T T T T T T T T
63 --- --- --- 1.7 2.9 4.2 T T T T T T T T
PH_03.book Seite 62 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
63
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 3
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
200 224 250 300 315 355 400 425 500 630
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 10
6TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.3 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TTTTTTTTTT
10 TTTTTTTTTT
13 TTTTTTTTTT
16 TTTTTTTTTT
20 TTTTTTTTTT
25 TTTTTTTTTT
32 TTTTTTTTTT
40 TTTTTTTTTT
50 TTTTTTTTTT
63 TTTTTTTTTT
PH_03.book Seite 63 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
64 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity limit values of miniature circuit breakers/fuses in kA
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 44a
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
630 800 1000 1250 500 630 800 1000 1250
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
6TTTTTTTTT
10 TTTTTTTTT
13 TTTTTTTTT
16 TTTTTTTTT
20 TTTTTTTTT
25 TTTTTTTTT
32 TTTTTTTTT
40 TTTTTTTTT
50 TTTTTTTTT
63 TTTTTTTTT
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 TTTTTTTTT
1TTTTTTTTT
1.6 TTTTTTTTT
2TTTTTTTTT
3TTTTTTTTT
4TTTTTTTTT
6TTTTTTTTT
8TTTTTTTTT
10 TTTTTTTTT
13 TTTTTTTTT
16 TTTTTTTTT
20 TTTTTTTTT
25 TTTTTTTTT
32 TTTTTTTTT
40 TTTTTTTTT
50 TTTTTTTTT
63 TTTTTTTTT
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 000
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 --- --- --- --- --- --- --- --- 0.8 11.5 2.8 3.6 6.9
50 --- --- --- --- --- --- --- --- --- 0.9 1.5 2.8 3.3 5.3
63 --- --- --- --- --- --- --- --- --- --- 1.1 22.5 4.5
80 --- --- --- --- --- --- --- --- --- --- --- 1.6 1.9 3.5
100 --- --- --- --- --- --- --- --- --- --- --- --- 1.8 3.2
125 --- --- --- --- --- --- --- --- --- --- --- --- --- 4.1
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 --- --- --- --- --- --- --- --- --- 0.9 1.4 2.5 3.1 5.7
50 --- --- --- --- --- --- --- --- --- 0.9 1.4 2.6 3.3 5.6
63 --- --- --- --- --- --- --- --- --- --- 11.6 1.9 4
80 --- --- --- --- --- --- --- --- --- --- --- --- --- 3
100 --- --- --- --- --- --- --- --- --- --- --- --- --- 2.6
PH_03.book Seite 64 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
65
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity limit values of miniature circuit breakers/fuses in kA
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 00
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 --- 0.8 11.5 2.8 4.2 6.8
50 --- --- 0.9 1.5 2.8 3.7 5.2
63 --- --- --- 1.1 22.8 4.4
80 --- --- --- --- 1.6 2.2 3.4
100 --- --- --- --- --- 23.1
125 --- --- --- --- --- --- 4
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 --- --- 0.9 1.4 2.5 3.5 5.5
50 --- --- 0.9 1.4 2.6 3.6 5.5
63 --- --- --- 11.5 2.2 3.9
80 --- --- --- --- --- --- 2.9
100 --- --- --- --- --- --- 2.6
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 0
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
610 16 20 25 32 35 40 50 63 80 100 125 160
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 --- --- --- --- --- --- --- --- 0.8 0.9 1.5 2.6 4.2 7
50 --- --- --- --- --- --- --- --- --- 0.8 1.4 2.7 3.6 5.3
63 --- --- --- --- --- --- --- --- --- --- 1.1 1.9 2.8 4.5
80 --- --- --- --- --- --- --- --- --- --- --- 1.5 2.2 3.5
100 --- --- --- --- --- --- --- --- --- --- --- --- 23.2
125 --- --- --- --- --- --- --- --- --- --- --- --- --- 4.1
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 --- --- --- --- --- --- --- --- --- 0.9 1.4 2.4 3.5 5.7
50 --- --- --- --- --- --- --- --- --- --- 1.3 2.5 3.6 5.6
63 --- --- --- --- --- --- --- --- --- --- 11.5 2.2 4
80 --- --- --- --- --- --- --- --- --- --- --- --- --- 3
100 --- --- --- --- --- --- --- --- --- --- --- --- --- 2.6
PH_03.book Seite 65 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
66 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 1
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
16 20 25 35 40 50 63 80 100 125 160 200 224 250
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 --- --- --- --- --- 0.8 0.9 1.5 2.6 4.2 7 T T T
50 --- --- --- --- --- --- 0.8 1.4 2.7 3.6 5.3 9.8 T T
63 --- --- --- --- --- --- --- 1.1 1.9 2.8 4.5 9 T T
80 --- --- --- --- --- --- --- --- 1.5 2.2 3.5 6.6 7.5 T
100 --- --- --- --- --- --- --- --- --- 23.2 5.6 6.7 8.8
125 --- --- --- --- --- --- --- --- --- --- 4.1 7.4 9.1 T
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 --- --- --- --- --- --- 0.9 1.4 2.4 3.5 5.7 9.5 T T
50 --- --- --- --- --- --- --- 1.3 2.5 3.6 5.6 9.7 T T
63 --- --- --- --- --- --- --- 11.5 2.2 46.9 8.2 T
80 --- --- --- --- --- --- --- --- --- --- 35.6 6.7 8.8
100 --- --- --- --- --- --- --- --- --- --- 2.6 5.3 6.4 8.2
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 2
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
35 50 63 80 100 125 160 200 224 250 300 315 355 400
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 --- 0.8 0.9 1.5 2.6 4.1 6.9 T T T T T T T
50 --- --- 0.9 1.4 2.6 3.6 5.3 9.8 T T T T T T
63 --- --- --- 1.1 1.8 2.8 4.5 9 T T T T T T
80 --- --- --- --- 1.5 2.1 3.5 6.6 7.5 T T T T T
100 --- --- --- --- --- 23.2 5.6 6.7 8.8 T T T T
125 --- --- --- --- --- --- 4.1 7.4 9.1 T T T T T
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 --- --- 0.9 1.4 2.3 3.4 5.7 9.5 T T T T T T
50 --- --- --- 1.3 2.4 3.6 5.6 9.7 T T T T T T
63 --- --- --- 11.5 2.1 46.9 8.2 T T T T T
80 --- --- --- --- --- --- 35.6 6.7 8.8 T T T T
100 --- --- --- --- --- --- 2.6 5.3 6.4 8.2 T T T T
PH_03.book Seite 66 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
67
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 3
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
200 224 250 300 315 355 400 425 500 630
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 TTTTTTTTTT
50 9TTTTTTTTT
63 7.6 TTTTTTTTT
80 6.3 7.3 TTTTTTTT
100 5.2 6.5 9TTTTTTT
125 6.8 8.8 TTTTTTTT
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 8.8 TTTTTTTTT
50 9TTTTTTTTT
63 6.5 7.9 TTTTTTTT
80 5.2 6.5 9TTTTTTT
100 4.7 6.3 8.6 TTTTTTT
Selectivity of the 5SP4... for the
upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 44a
Rated breaking capacity I
cu
[AC kA] 120
Rated current I
n
[A]
1)
630 800 1000 1250 500 630 800 1000 1250
Circuit breaker type:
5SP4...-.
Characteristic B/C
I
cn
[kA] = 10
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
80 T T T T T T T T T
100 T T T T T T T T T
125 T T T T T T T T T
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
80 T T T T T T T T T
100 T T T T T T T T T
PH_03.book Seite 67 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
68 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 5SB/5SC/5SD... [kA]
Fuse 5SB2 5SB4 5SC2 5SD8
Releases gG
Rated breaking capacity I
cu
[A] 50
Rated current I
n
[A]
1)
16 20 25 32 35 50 63 80 100 16 20 25 35 50 63
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1T T T T T T T T T T T T T T T
20.6 13.3 T T T T T T 0.9 1.3 2.1 T T T
30.45 0.6 1.2 2.9 TTTTT0.55 0.7 0.9 5.2 T T
40.35 0.5 0.85 1.4 2.1 3.8 TTT0.4 0.5 0.65 1.8 3.9 T
60.35 0.5 0.8 1.3 1.9 3.1 6.7 T T 0.4 0.5 0.6 1.6 3.1 6.3
8--- 0.45 0.75 1.2 1.7 2.6 56.2 T--- 0.5 0.6 1.4 2.7 4.7
10 --- 0.45 0.7 11.5 2.2 44.9 T--- 0.45 0.55 1.2 2.2 3.8
13 --- 0.4 0.65 11.4 2.1 3.5 4.2 8.4 --- 0.45 0.5 1.2 23.4
16 --- 0.4 0.6 0.9 1.2 1.9 3.1 3.8 7.2 --- 0.4 0.5 11.9 3
20 --- --- 0.6 0.9 1.2 1.8 2.9 3.5 6.6 --- --- 0.5 11.8 2.8
25 --- --- --- 0.85 1.1 1.6 2.7 3.2 5.7 --- --- --- 0.9 1.6 2.5
32 --- --- --- --- --- 1.4 2.3 2.8 4.9 --- --- --- --- 1.4 2.2
40 --- --- --- --- --- 1.4 2.3 2.8 4.9 --- --- --- --- 1.4 2.2
50 --- --- --- --- --- --- 1.9 2.3 3.9 --- --- --- --- --- 1.8
63 --- --- --- --- --- --- --- 2.3 3.6 --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T T
10.8 1.6 8.3 T T T T T T 1.3 2.2 3.7 T T T
1.6 0.5 0.75 1.6 5.1 TTTTT0.65 0.85 1.1 T T T
20.4 0.55 11.8 2.9 5.9 TTT0.45 0.6 0.75 2.4 6.1 T
30.35 0.5 0.85 1.4 2.2 3.7 8.5 T T 0.4 0.55 0.65 1.9 3.8 8
4--- 0.5 0.8 1.3 1.9 3.1 6.1 7.9 T0.4 0.5 0.6 1.6 3.1 5.8
6--- 0.45 0.7 11.4 2.3 4.2 5.3 T0.35 0.45 0.55 1.2 2.3 4
8--- --- 0.55 0.85 1.1 1.7 33.7 8--- 0.4 0.45 0.9 1.7 2.8
10 --- --- 0.55 0.85 1.1 1.7 33.7 8--- 0.4 0.45 0.9 1.7 2.8
13 --- --- 0.55 0.85 1.1 1.6 2.5 3.1 5.8 --- 0.4 0.45 0.9 1.5 2.4
16 --- --- 0.55 0.85 1.1 1.6 2.5 3.1 5.8 --- 0.4 0.45 0.9 1.5 2.4
20 --- --- 0.5 0.8 11.4 2.3 2.8 5.1 --- --- 0.45 0.85 1.4 2.1
25 --- --- --- 0.8 11.4 2.3 2.8 5.1 --- --- --- 0.85 1.4 2.1
32 --- --- --- --- --- 1.3 2.1 2.5 4.4 --- --- --- --- 1.3 1.9
40 --- --- --- --- --- 1.3 2.1 2.5 4.4 --- --- --- --- 1.3 1.9
50 --- --- --- --- --- --- 1.8 2.2 3.5 --- --- --- --- --- 1.7
63 --- --- --- --- --- --- --- 2.2 3.5 --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T T
10.55 0.85 27.8 TTTTT0.7 11.3 T T T
1.6 0.45 0.6 1.1 23.5 9.1 TTT0.55 0.7 0.85 2.8 T T
20.4 0.55 0.9 1.6 2.5 4.4 TTT0.45 0.55 0.7 2.1 4.5 T
3--- 0.45 0.8 1.3 23.2 6.6 8.4 T0.4 0.5 0.6 1.6 3.3 6.2
4--- 0.45 0.7 1.1 1.6 2.6 56.4 T0.35 0.45 0.55 1.3 2.6 4.7
6--- 0.4 0.65 11.3 2.1 3.7 4.6 T--- 0.4 0.5 1.1 2.1 3.6
8--- --- 0.55 0.85 1.1 1.6 2.6 3.2 6--- --- 0.45 0.9 1.6 2.5
10 --- --- 0.55 0.85 1.1 1.6 2.6 3.2 6--- --- 0.45 0.9 1.6 2.5
13 --- --- 0.5 0.75 11.4 2.3 2.8 5--- --- 0.45 0.8 1.4 2.1
16 --- --- 0.5 0.75 11.4 2.3 2.8 5--- --- 0.45 0.8 1.4 2.1
20 --- --- 0.45 0.75 0.9 1.4 2.2 2.7 4.7 --- --- 0.4 0.8 1.4 2
25 --- --- --- 0.75 0.9 1.4 2.2 2.7 4.7 --- --- --- 0.8 1.4 2
32 --- --- --- --- --- 1.2 1.9 2.4 4.1 --- --- --- --- 1.2 1.8
40 --- --- --- --- --- 1.2 1.9 2.4 4.1 --- --- --- --- 1.2 1.8
50 --- --- --- --- --- --- 1.6 23.1 --- --- --- --- --- 1.5
63 --- --- --- --- --- --- --- 23.1 --- --- --- --- --- ---
PH_03.book Seite 68 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
69
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/fuses in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 5SE2/5SA2... [kA]
Fuse 5SE2 5SA2
Releases gG Delayed
Rated breaking capacity I
cu
[A] 50 40
Rated current I
n
[A]
1)
16 20 25 32 35 40 50 63 80 100 16 20 25
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1T T T T T T T T T T T T T
20.5 1.2 3 T T T T T T T 0.7 1.1 3.7
30.35 0.65 1.1 3.5 5.6 TTTTT0.5 0.65 1.3
4--- 0.5 0.75 1.5 1.8 2.6 4.7 T T T 0.4 0.5 0.85
6--- 0.5 0.7 1.4 1.6 2.2 3.6 6 T T 0.4 0.5 0.8
8--- 0.5 0.7 1.3 1.5 234.6 6.3 T0.35 0.5 0.75
10 --- 0.45 0.65 1.1 1.3 1.7 2.5 3.7 4.9 9.4 0.35 0.45 0.7
13 --- 0.4 0.6 1.1 1.2 1.6 2.3 3.3 4.2 7.1 --- 0.45 0.7
16 --- 0.4 0.55 11.1 1.5 2.1 2.9 3.7 6.2 --- 0.4 0.65
20 --- --- 0.5 0.9 1.1 1.4 22.7 3.5 5.6 --- --- 0.6
25 --- --- --- 0.9 11.3 1.8 2.5 3.1 4.9 --- --- ---
32 --- --- --- --- --- 1.2 1.6 2.2 2.7 4.3 --- --- ---
40 --- --- --- --- --- --- 1.6 2.2 2.7 4.3 --- --- ---
50 --- --- --- --- --- --- --- 1.8 2.3 3.5 --- --- ---
63 --- --- --- --- --- --- --- --- 2.2 2.4 --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T
10.7 1.9 6 T T T T T T T 0.9 1.7 T
1.6 0.45 0.8 1.4 7.5 T T T T T T 0.55 0.75 1.7
2--- 0.55 0.9 22.4 3.6 8.5 T T T 0.45 0.6 1
3--- 0.5 0.8 1.6 1.9 2.7 4.4 7.8 T T 0.4 0.55 0.9
4--- 0.5 0.75 1.4 1.6 2.2 3.6 5.6 8 T 0.4 0.5 0.85
6--- 0.45 0.65 1.1 1.3 1.7 2.5 3.9 5.3 T--- 0.45 0.7
8--- --- 0.5 0.9 11.4 1.9 2.7 3.6 6.6 --- --- 0.55
10 --- --- 0.5 0.9 11.4 1.9 2.7 3.6 6.6 --- --- 0.55
13 --- --- 0.5 0.9 11.3 1.7 2.4 34.9 --- --- 0.55
16 --- --- 0.5 0.9 11.3 1.7 2.4 34.9 --- --- 0.55
20 --- --- 0.5 0.85 0.9 1.2 1.6 2.1 2.7 4.3 --- --- 0.55
25 --- --- --- 0.85 0.9 1.2 1.6 2.1 2.7 4.3 --- --- ---
32 --- --- --- --- --- 1.1 1.4 1.9 2.4 3.8 --- --- ---
40 --- --- --- --- --- --- 1.4 1.9 2.4 3.8 --- --- ---
50 --- --- --- --- --- --- --- 1.7 2.1 3.2 --- --- ---
63 --- --- --- --- --- --- --- --- 2.1 3.2 --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T
10.5 0.9 1.8 TTTTTTT0.65 0.85 2.1
1.6 0.35 0.65 12.3 2.9 4.6 T T T T 0.5 0.65 1.1
2--- 0.55 0.85 1.7 2.1 3.1 5.4 T T T 0.45 0.55 0.9
3--- 0.45 0.7 1.4 1.7 2.3 3.8 68.5 T0.35 0.5 0.8
4--- 0.45 0.65 1.2 1.4 1.9 34.7 6.3 T0.35 0.45 0.75
6--- 0.4 0.6 11.2 1.6 2.4 3.5 4.6 8.9 --- 0.4 0.65
8--- --- 0.45 0.85 11.3 1.7 2.4 3.1 5--- --- 0.5
10 --- --- 0.45 0.85 11.3 1.7 2.4 3.1 5--- --- 0.5
13 --- --- 0.45 0.8 0.9 1.2 1.5 2.1 2.7 4.3 --- --- 0.5
16 --- --- 0.45 0.8 0.9 1.2 1.5 2.1 2.7 4.3 --- --- 0.5
20 --- --- --- 0.75 0.9 1.1 1.5 22.6 4.1 --- --- 0.5
25 --- --- --- 0.75 0.9 1.1 1.5 22.6 4.1 --- --- ---
32 --- --- --- --- --- 11.3 1.8 2.3 3.6 --- --- ---
40 --- --- --- --- --- --- 1.3 1.8 2.3 3.6 --- --- ---
50 --- --- --- --- --- --- --- 1.5 1.9 2.9 --- --- ---
63 --- --- --- --- --- --- --- --- 1.9 2.9 --- --- ---
PH_03.book Seite 69 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
70 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity of miniature circuit breakers/circuit breakers
Distribution systems can also be set up without fuses. In such
cases, a circuit breaker acts as an upstream protective device.
In this case, the selectivity limit depends on the level of peak
current Î let through by the miniature circuit breaker and the
tripping current of the circuit breaker.
The following tables show the short-circuit current in kA up to
which selectivity is guaranteed between miniature circuit
breakers and upstream circuit breakers according to
IEC/EN 60947-2 at 230/400 V AC, 50 Hz.
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
Values for 5SY8 on request.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream miniature circuit breakers Upstream circuit breakers
3RV1.1 3RV1.2
I
n
[A] 10 12 810 12.5 16 20 22 25
I
i
[A] 120 144 96 120 150 192 240 264 300
I
cu
[kA] 50 50 100 100 100 50 50 50 50
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY4...-5
Characteristic A 2 10 0.2 0.2 -- -- 0.2 0.2 0.6 1.2 1.5
10 10 -- -- -- -- -- -- 0.3 0.5 0.5
16 10 -- -- -- -- -- -- 0.3 0.4 0.5
32 10 -- -- -- -- -- -- -- -- --
40 10 -- -- -- -- -- -- -- -- --
5SY6...-6, 5SY4...-6, 5SY7...-6, 5SJ4...-6HG40
2)
Characteristic B 6 6/10/15 0.2 0.2 -- -- 0.2 0.2 0.3 0.5 0.5
10 6/10/15 -- 0.2 -- -- 0.2 0.2 0.3 0.4 0.5
13 6/10/15 -- -- -- -- -- 0.2 0.2 0.4 0.4
16 6/10/15 -- -- -- -- -- -- 0.2 0.4 0.4
20 6/10/15 -- -- -- -- -- -- -- -- 0.4
25 6/10/15 -- -- -- -- -- -- -- -- --
32 6/10/15 -- -- -- -- -- -- -- -- --
40 6/10/15 -- -- -- -- -- -- -- -- --
50 6/10/15 -- -- -- -- -- -- -- -- --
63 6/10/15 -- -- -- -- -- -- -- -- --
80 6/10/15 -- -- -- -- -- -- -- -- --
5SY6...-7, 5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
2)
Characteristic C 0.5 10/15 0.2 0.2 0.1 0.1 0.2 0.2 0.5 0.6 0.6
1 10/15 0.2 0.2 0.1 0.1 0.2 0.2 0.5 0.6 0.6
1.6 10/15 0.2 0.2 0.1 0.1 0.2 0.2 0.5 0.6 0.6
2 10/15 0.2 0.2 0.1 0.1 0.2 0.2 0.5 0.6 0.6
3 10/15 -- 0.2 -- -- 0.2 0.2 0.3 0.4 0.5
4 10/15 -- 0.2 -- -- 0.2 0.2 0.3 0.4 0.5
6 10/15 -- 0.2 -- -- 0.2 0.2 0.3 0.4 0.5
8 10/15 -- 0.2 -- -- 0.2 0.2 0.2 0.4 0.4
10 10/15 -- 0.2 -- -- 0.2 0.2 0.2 0.4 0.4
13 10/15 -- -- -- -- -- 0.2 0.2 0.4 0.4
16 10/15 -- -- -- -- -- -- 0.2 0.4 0.4
20 10/15 -- -- -- -- -- -- -- -- 0.4
25 10/15 -- -- -- -- -- -- -- -- --
32 10/15 -- -- -- -- -- -- -- -- --
40 10/15 -- -- -- -- -- -- -- -- --
50 10/15 -- -- -- -- -- -- -- -- --
63 10/15 -- -- -- -- -- -- -- -- --
80 10/15 -- -- -- -- -- -- -- -- --
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
2)
Characteristic D 2 10/15 -- -- -- -- 0.2 0.2 0.4 0.6 0.6
6 10/15 -- -- -- -- -- -- 0.3 0.4 0.4
10 10/15 -- -- -- -- -- -- 0.2 0.4 0.4
16 10/15 -- -- -- -- -- -- -- -- --
32 10/15 -- -- -- -- -- -- -- -- --
40 10/15 -- -- -- -- -- -- -- -- --
50 10/15 -- -- -- -- -- -- -- -- --
63 10/15 -- -- -- -- -- -- -- -- --
PH_03.book Seite 70 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
71
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
In the event of a short-circuit, selectivity up to the specified
values in kA exists between miniature circuit breakers and circuit
breakers according to IEC/EN 60947-2.
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream miniature circuit breakers Upstream circuit breakers
3RV1.3
I
n
[A] 16 20 25 32 40 45 50
I
i
[A] 192 240 300 384 480 540 600
I
cu
[kA] 50 50 50 50 50 50 50
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY4...-5
Characteristic A 2 10 0.2 0.8 1.2 2.5 366
10 10 0.2 0.4 0.5 0.6 0.8 11.2
16 10 -- 0.3 0.4 0.6 0.8 0.8 1
32 10 -- -- -- -- 0.6 0.8 0.8
40 10 -- -- -- -- -- -- 0.8
5SY6...-6, 5SY4...-6, 5SY7...-6, 5SJ4...-6HG40
2)
Characteristic B 6 6/10/15 0.2 0.3 0.5 0.6 0.8 11.2
10 6/10/15 0.2 0.3 0.4 0.6 0.8 11.2
13 6/10/15 0.2 0.3 0.4 0.6 0.8 1 1
16 6/10/15 -- 0.3 0.4 0.6 0.8 1 1
20 6/10/15 -- -- 0.4 0.6 0.8 1 1
25 6/10/15 -- -- -- 0.5 0.6 0.8 0.8
32 6/10/15 -- -- -- -- 0.6 0.8 0.8
40 6/10/15 -- -- -- -- -- -- 0.8
50 6/10/15 -- -- -- -- -- -- --
63 6/10/15 -- -- -- -- -- -- --
80 6/10/15 -- -- -- -- -- -- --
5SY6...-7, 5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
2)
Characteristic C 0.5 6/10/15 0.3 0.5 0.6 1 1 1.5 3
1 6/10/15 0.3 0.5 0.6 1 1 1.5 3
1.6 6/10/15 0.3 0.5 0.6 1 1 1.5 3
2 6/10/15 0.3 0.5 0.6 1 1 1.5 3
3 6/10/15 0.2 0.3 0.4 0.6 0.8 1 1
4 6/10/15 0.2 0.3 0.4 0.6 0.8 1 1
6 6/10/15 0.2 0.3 0.4 0.6 0.8 1 1
8 6/10/15 0.2 0.2 0.4 0.6 0.6 0.8 1
10 6/10/15 0.2 0.2 0.4 0.6 0.6 0.8 1
13 6/10/15 0.2 0.2 0.4 0.6 0.6 0.8 1
16 6/10/15 -- 0.2 0.4 0.6 0.6 0.8 1
20 6/10/15 -- -- 0.4 0.6 0.6 0.8 1
25 6/10/15 -- -- -- 0.5 0.6 0.8 0.8
32 6/10/15 -- -- -- -- 0.6 0.8 0.8
40 6/10/15 -- -- -- -- -- -- 0.8
50 6/10/15 -- -- -- -- -- -- --
63 6/10/15 -- -- -- -- -- -- --
80 6/10/15 -- -- -- -- -- -- --
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
2)
Characteristic D 2 10/15 0.3 0.5 0.6 0.8 1.2 1.5 1.5
6 10/15 0.2 0.3 0.4 0.6 0.8 1 1
10 10/15 -- 0.3 0.4 0.5 0.6 0.8 0.8
16 10/15 -- -- -- 0.5 0.6 0.6 0.8
32 10/15 -- -- -- -- -- 0.6 0.6
40 10/15 -- -- -- -- -- -- --
50 10/15 -- -- -- -- -- -- --
63 10/15 -- -- -- -- -- -- --
PH_03.book Seite 71 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
72 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
In the event of a short-circuit, selectivity up to the specified
values in kA exists between miniature circuit breakers and circuit
breakers according to IEC/EN 60947-2.
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
Values for 5SY8 on request.
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream miniature circuit breakers Upstream circuit breakers
3RV1.4
I
n
[A] 16 20 25 32 40 50 63 75 90 100
I
i
[A] 192 240 300 384 480 600 756 900 1080 1140
I
cu
[kA] 100 100 100 100 100 100 100 100 100 100
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY4...-5
Characteristic A 2 10 0.5 0.8 1.5 2.5 3TTTTT
10 10 0.3 0.4 0.5 0.6 0.8 1.2 1.5 2.5 3 4
16 10 -- 0.3 0.5 0.6 0.6 11.5 233
32 10 -- -- -- -- 0.6 0.8 1.5 22.5 3
40 10 -- -- -- -- -- 0.8 1.2 1.5 2 2
5SY6...-6, 5SY4...-6, 5SY7...-6, 5SJ4...-6HG40
2)
Characteristic B 6 6/10/15 0.2 0.4 0.5 0.6 0.8 1.2 23TT
10 6/10/15 0.2 0.3 0.5 0.6 0.8 11.5 2.5 4 4
13 6/10/15 0.2 0.3 0.5 0.6 0.8 11.5 233
16 6/10/15 -- 0.3 0.5 0.6 0.8 11.5 233
20 6/10/15 -- -- 0.5 0.6 0.8 11.5 233
25 6/10/15 -- -- -- 0.5 0.8 0.8 1.5 233
32 6/10/15 -- -- -- -- 0.6 0.8 1.5 233
40 6/10/15 -- -- -- -- 0.6 0.8 1.2 1.5 2.5 2.5
50 6/10/15 -- -- -- -- -- -- 1.2 1.5 2.5 2.5
5SY6...-7, 5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
2)
Characteristic C 0.5 6/10/15 0.4 0.6 0.8 0.8 13TTTT
16/10/15 0.4 0.6 0.8 0.8 13TTTT
1.6 6/10/15 0.4 0.6 0.8 0.8 13TTTT
26/10/15 0.4 0.6 0.8 0.8 13TTTT
36/10/15 0.2 0.3 0.5 0.6 0.8 1 2 2.5 5 5
46/10/15 0.2 0.3 0.5 0.6 0.8 1 2 2.5 5 5
66/10/15 0.2 0.3 0.5 0.6 0.8 1 2 2.5 5 5
86/10/15 0.2 0.3 0.4 0.6 0.6 11.5 233
10 6/10/15 0.2 0.3 0.4 0.6 0.6 11.5 233
13 6/10/15 0.2 0.3 0.4 0.6 0.6 11.5 233
16 6/10/15 -- 0.3 0.4 0.6 0.6 11.5 233
20 6/10/15 -- -- 0.4 0.6 0.6 11.5 233
25 6/10/15 -- -- -- 0.5 0.6 0.8 1.2 1.5 2.5 2.5
32 6/10/15 -- -- -- -- 0.6 0.8 1.2 1.5 2.5 2.5
40 6/10/15 -- -- -- -- -- 0.6 11.5 2 2
50 6/10/15 -- -- -- -- -- -- 11.2 1.5 2
63 6/10/15 -- -- -- -- -- -- -- -- 1.5 1.5
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
2)
Characteristic D 2 10/15 0.4 0.5 0.6 0.8 11.5 34TT
6 10/15 0.2 0.3 0.4 0.6 0.6 11.5 2.5 3 3
10 10/15 -- 0.3 0.4 0.5 0.6 0.8 1.5 233
16 10/15 -- -- -- 0.5 0.6 0.8 1.2 1.5 2.5 2.5
32 10/15 -- -- -- -- -- 0.6 11.5 2 2
40 10/15 -- -- -- -- -- -- 11.2 1.5 1.5
50 10/15 -- -- -- -- -- -- 11.2 1.5 1.5
5SP4...-7
Characteristic C 80 10 -- -- -- -- -- -- -- -- -- 1.2
100 10 -- -- -- -- -- -- -- -- -- --
5SP4...-8
Characteristic D 80 10 -- -- -- -- -- -- -- -- -- --
100 10 -- -- -- -- -- -- -- -- -- --
PH_03.book Seite 72 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
73
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Downstream
miniature circuit breakers
Upstream circuit breakers
3WN1, ETU1, adjustable
I
n
[A] 126 ...
315
160 ...
400
200 ...
500
252 ...
630
320 ...
800
400 ...
1000
500 ...
1250
640 ...
1600
800 ...
2000
1000 ...
2500
1280 ...
3200
1600 ...
4000
2000 ...
5000
2520 ...
6300
I
cu
[kA] 65 80 50 ... 80 50 ...
100
65 ... 100 100
I
i
[A] 630 ...
3780
800 ...
4800
1000 ...
5000
1260 ...
7560
1600 ...
9600
2000 ...
12000
2500 ...
15000
3200 ...
19200
4000 ...
24400
5000 ...
30000
6300 ...
38400
8000 ...
48000
10000
...
60000
12600
...
75600
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic
B/C
0.5 6 TTTTTTTTTTTTT
16 TTTTTTTTTTTTT
1.6 6 TTTTTTTTTTTTT
26 TTTTTTTTTTTTT
36 TTTTTTTTTTTTT
46 TTTTTTTTTTTTT
66 TTTTTTTTTTTTT
86 TTTTTTTTTTTTT
10 6 TTTTTTTTTTTTT
13 6 TTTTTTTTTTTTT
16 6 TTTTTTTTTTTTT
20 6 TTTTTTTTTTTTT
25 6 TTTTTTTTTTTTT
32 6 TTTTTTTTTTTTT
40 6 TTTTTTTTTTTTT
50 6 TTTTTTTTTTTTT
63 6 TTTTTTTTTTTTT
Downstream
miniature circuit breakers
Upstream circuit breakers
3WN6, ETU B, adjustable
I
n
[A] 126 ...
315
160 ...
400
200 ...
500
252 ...
630
320 ...
800
400 ...
1000
500 ...
1250
640 ...
1600
800 ...
2000
1000 ...
2500
1280 ...
3200
I
cu
[kA] 65 65 ... 80 65 65 ... 80 80
I
i
[A] 4725 6000 7500 9450 12000 15000 18750 24000 30000 37500 48000
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic
B/C
0.5 6 T T T T T T T T T T T
16 T T T T T T T T T T T
1.6 6 T T T T T T T T T T T
26 T T T T T T T T T T T
36 T T T T T T T T T T T
46 T T T T T T T T T T T
66 T T T T T T T T T T T
86 T T T T T T T T T T T
10 6 T T T T T T T T T T T
13 6 T T T T T T T T T T T
16 6 T T T T T T T T T T T
20 6 T T T T T T T T T T T
25 6 T T T T T T T T T T T
32 6 T T T T T T T T T T T
40 6 T T T T T T T T T T T
50 6 T T T T T T T T T T T
63 6 T T T T T T T T T T T
PH_03.book Seite 73 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
74 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Downstream
miniature circuit breakers
Upstream circuit breakers
3WL1-3B, ETU 15B, adjustable 3WL1-4B, ETU 15B, adjustable
I
n
[A] 315 ...
630
400 ...
800
500 ...
1000
625 ...
1250
800 ...
1600
400 ...
800
500 ...
1000
625 ...
1250
800 ...
1600
1000 ...
2000
1250 ...
2500
1600 ...
3200
I
cu
[kA] 55 ... 150 55 ... 150 55 ... 100 80 ... 100
I
i
[A] 1260 ...
5040
1600 ...
6400
2000 ...
8000
2500 ...
10000
3200 ...
12800
1600 ...
6400
2000 ...
8000
2500 ...
10000
3200 ...
12800
4000 ...
16000
5000 ...
20000
6400 ...
25600
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic
B/C
0.5 6 TTTTTTTTTTTT
1 6 TTTTTTTTTTTT
1.6 6 TTTTTTTTTTTT
2 6 TTTTTTTTTTTT
3 6 TTTTTTTTTTTT
4 6 TTTTTTTTTTTT
66 TTTTTTTTTTTT
8 6 TTTTTTTTTTTT
10 6 TTTTTTTTTTTT
13 6 TTTTTTTTTTTT
16 6 TTTTTTTTTTTT
20 6 TTTTTTTTTTTT
25 6 TTTTTTTTTTTT
32 6 TTTTTTTTTTTT
40 6 TTTTTTTTTTTT
50 6 TTTTTTTTTTTT
63 6 TTTTTTTTTTTT
Downstream
miniature circuit breakers
Upstream circuit breakers
3WL1, ETU 25B, 27B, 45B, 76B, adjustable
I
n
[A] 100 ...
250
126 ...
315
160 ...
400
200 ...
500
250 ...
630
320 ...
800
400 ...
1000
500 ...
1250
640 ...
16v00
800 ...
2000
1000 ...
2500
1280 ...
3200
1600 ...
4000
2000 ...
5000
2520 ...
6300
I
cu
[kA] 55 ... 100
I
i
[A] 5000 6300 8000 10000 12600 16000 20000 25000 32000 40000 50000 50000 50000 50000 50000
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic
B/C
0.5 6 TTTTTTTTTTT T T T T
1 6 TTTTTTTTTTT T T T T
1.6 6 TTTTTTTTTTT T T T T
2 6 TTTTTTTTTTT T T T T
3 6 TTTTTTTTTTT T T T T
4 6 TTTTTTTTTTT T T T T
66 TTTTTTTTTTT T T T T
8 6 TTTTTTTTTTT T T T T
10 6 TTTTTTTTTTT T T T T
13 6 TTTTTTTTTTT T T T T
16 6 TTTTTTTTTTT T T T T
20 6 TTTTTTTTTTT T T T T
25 6 TTTTTTTTTTT T T T T
32 6 TTTTTTTTTTT T T T T
40 6 TTTTTTTTTTT T T T T
50 6 TTTTTTTTTTT T T T T
63 6 TTTTTTTTTTT T T T T
PH_03.book Seite 74 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
75
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream fuse 3WL1... [kA]
Circuit breakers 3WL1
Releases ETU
Rated current I
n
[A]
1)
250 A ... 6300 A
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1T
2T
3T
4T
6T
8T
10 T
13 T
16 T
20 T
25 T
32 T
40 T
50 T
63 T
Circuit breaker type:
5SL4...-.
Characteristic C/D
I
cn
[kA] = 10
0.3 T
0.5 T
1T
1.6 T
2T
3T
4T
6T
8T
10 T
13 T
16 T
20 T
25 T
32 T
40 T
50 T
63 T
PH_03.book Seite 75 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
76 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity of miniature circuit breakers/molded case circuit breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Downstream miniature circuit breakers Upstream molded case circuit breakers
3VL1, TM, non-adjustable
I
n
[A] 16 20 25 32 40 50 63 80 100 125 160
I
cu
[kA] 55/70
I
i
[A] 300 300 300 300 600 600 600 1000 1000 1000 1500
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic B/C 0.5 6 TTTTTTT T T T T
16 TTTTTTT T T T T
1.6 6 2.5 2.5 2.5 2.5 T T T T T T T
26 1.6 1.6 1.6 1.6 4.2 4.2 4.2 T T T T
36 1.3 1.3 1.3 1.3 3.8 3.8 3.8 T T T T
46 1.3 1.3 1.3 1.3 3.5 3.5 3.5 T T T T
66 1.0 1.0 1.0 1.0 2.7 2.7 2.7 5.5 5.5 5.5 T
86 0.9 0.9 0.9 0.9 2.5 2.5 2.5 5.0 5.0 5.0 T
10 6 0.9 0.9 0.9 0.9 2.4 2.4 2.4 4.6 4.6 4.6 T
13 6 0.9 0.9 0.9 0.9 2.4 2.4 2.4 4.5 4.5 4.5 T
16 6 -- 0.8 0.8 0.8 1.9 1.9 1.9 3.6 3.6 3.6 5.6
20 6 -- -- 0.8 0.8 1.9 1.9 1.9 3.5 3.5 3.5 5.6
25 6 -- -- -- 0.8 1.8 1.8 1.8 3.4 3.4 3.4 5.4
32 6 -- -- -- -- 1.6 1.6 1.6 2.5 2.5 2.5 4.5
40 6 -- -- -- -- -- 1.8 1.8 3.3 3.3 3.3 5.5
50 6 -- -- -- -- -- -- 1.5 2.5 2.5 2.5 4.7
63 6 -- -- -- -- -- -- -- 2.6 2.6 2.6 4.4
Downstream miniature circuit breakers Upstream molded case circuit breakers
3VL2, TM, adjustable 3VL2, ETU, adjustable
I
n
[A] 40 ... 50 50 ... 63 63 ... 80 80 to 100 100 ... 125 125 ... 160 25 ... 63 40 ... 100 64 ... 160
I
cu
[kA] 55/70/100 55/70/100
I
i
[A] 300 ... 600 300 ... 600 400 ... 800 500 ...
1000
625 ...
1250
800 ...
1600
80 ... 693 125 ...
1100
200 ...
1760
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic B/C 0.5 6 TTTTTTTTT
16 TTTTTTTTT
1.6 6 TTTTTT2.8 5.6 T
26 2.5 2.5 4.1 TTT1.9 2.9 T
36 2.0 2.0 3.7 5.1 T T 1.7 2.4 T
46 2.0 2.0 3.4 4.7 T T 1.6 2.4 T
66 1.6 1.6 2.5 3.4 4.9 T1.2 1.6 3.6
86 1.5 1.5 2.5 3.2 4.4 5.9 1.2 1.6 3.2
10 6 1.5 1.5 2.3 3.0 4.1 5.4 1.2 1.5 3.1
13 6 1.2 1.2 2.3 3.0 4.0 5.8 1.2 1.5 3.0
16 6 1.2 1.2 1.9 2.5 3.3 4.2 1.0 1.3 2.6
20 6 1.2 1.2 1.8 2.0 3.2 4.0 1.0 1.3 2.6
25 6 1.2 1.2 1.8 2.0 3.1 3.9 1.0 1.3 2.5
32 6 1.2 1.2 1.6 2.0 2.5 3.2 1.1 1.3 2.5
40 6 1.2 1.2 1.8 2.0 3.0 3.8 1.0 1.3 2.6
50 6 -- 1.1 1.6 2.0 2.5 3.3 1.0 1.2 2.3
63 6 -- -- 1.5 1.5 2.5 3.0 -- 1.2 2.2
PH_03.book Seite 76 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
77
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Downstream miniature circuit breakers Upstream molded case circuit breakers, adjustable
3VL3, TM 3VL3, ETU 3VL4, TM 3VL4, ETU
I
n
[A] 160 ...
200
200 ...
250
80 ...
200
100 ...
250
160 ...
200
200 ...
250
250 ...
315
315 ...
400
126 ...
315
160 ...
400
I
cu
[kA] 55/70/100 55/70/100 55/70/100 55/70/100
I
i
[A] 1000 ...
2000
1200 ...
2500
250 ... 2200 315 ...
2750
1000 ...
2000
1200 ...
2500
3150 2000 ...
4000
400 ...
3465
500 ...
4400
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic B/C 0.5 6 T T T T T T T T T T
16 T T T T T T T T T T
1.6 6 T T T T T T T T T T
26 T T T T T T T T T T
36 T T T T T T T T T T
46 T T T T T T T T T T
66 TT5.5 T T T T T T T
86 TT5.0 T T T T T T T
10 6 TT4.7 T T T T T T T
13 6 TT4.6 T T T T T T T
16 6 TT3.8 5.6 T T T T T T
20 6 TT3.7 5.2 T T T T T T
25 6 TT3.6 5.5 T T T T T T
32 6 TT3.4 4.9 T T T T T T
40 6 TT3.7 5.5 T T T T T T
50 6 TT3.2 4.6 T T T T T T
63 6 TT3.0 4.4 T T T T T T
Downstream miniature circuit breakers Upstream molded case circuit breakers, adjustable
3VL5, TM 3VL5, ETU 3VL6, ETU 3VL7, ETU 3VL8, ETU
I
n
[A] 250 ...
315
315 ...
400
400 ...
500
500 ...
630
252 ...
630
320 ...
800
400 ...
1000
500 ...
1250
640 ...
1600
I
cu
[kA] 55/70/100 55/70/100 55/70/100 55/70/100 55/70/100
I
i
[A] 1575 ...
3150
2000 ...
4000
2500 ...
5000
3250 ...
6300
800 ...
6300
1000 ...
6400
1250 ...
11000
1600 ...
13750
2000 ...
14400
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SL3, 5SL6
Characteristic B/C 0.5 6 T T T T T T T T T
16 T T T T T T T T T
1.6 6 T T T T T T T T T
26 T T T T T T T T T
36 T T T T T T T T T
46 T T T T T T T T T
66 T T T T T T T T T
86 T T T T T T T T T
10 6 T T T T T T T T T
13 6 T T T T T T T T T
16 6 T T T T T T T T T
20 6 T T T T T T T T T
25 6 T T T T T T T T T
32 6 T T T T T T T T T
40 6 T T T T T T T T T
50 6 T T T T T T T T T
63 6 T T T T T T T T T
PH_03.book Seite 77 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
78 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
In the event of a short-circuit, selectivity up to the specified
values in kA exists between miniature circuit breakers and
molded case circuit breakers according to IEC/EN 60947-2.
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
Values for 5SY8 on request.
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream
miniature circuit breakers
Upstream molded case circuit breakers
3VL1, TM, non-adjustable 3VL2, TM, adjustable
I
n
[A] 50 63 80 100 125 160 40 ... 50 50 ... 63 63 ... 80 80 ...
100
100 ...
125
125 ...
160
I
i
[A] 600 600 1000 1000 1250 1500 300 ...
600
300 ...
600
400 ...
800
500 ...
1000
625 ...
1250
800 ...
1600
I
cu
[kA] 55/70 55/70 55/70 55/70 55/70 55/70 55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY4...-5
Characteristic A 2 10 T T T T T T T T T T T T
10 10 1.6 4.7 6TTT2.5 444.5 4.9 T
16 10 1.4 4.7 6TTT2.3 3.7 3.7 4.4 5 T
32 10 1.2 3.6 4.6 TT T 1.8 333.5 3.7 6
40 10 12.5 3.1 6TT1.5 222.4 2.7 3.2
5SY6...-6, 5SY4...-6, 5SY7...-6, 5SJ4...-6HG40
2)
Characteristic B 6 6/10/15 5.5 5.5 TTTT2.5 2.5 5.1 7.3 T T
10 6/10/15 3.1 3.1 6.7 6.7 6.7 6/12/4 2.0 2.0 3.0 3.9 5.0 8.6
13 6/10/15 2.5 2.5 5.0 5.0 5.0 8.0 1.5 1.5 3.1 3.4 4.5 5.8
16 6/10/15 2.5 2.5 4.4 4.4 4.4 7.2 1.5 1.5 2.0 3.1 4.0 5.1
20 6/10/15 2.0 2.0 4.3 4.3 4.3 6.6 1.5 1.5 2.0 2.5 3.9 5.0
25 6/10/15 2.0 2.0 3.9 3.9 3.9 6.1 1.5 1.5 2.0 2.1 3.4 4.6
32 6/10/15 2.0 2.0 3.7 3.7 3.7 5.0 1.5 1.5 2.0 2.1 3.4 4.8
40 6/10/15 2.0 2.0 3.7 3.7 3.7 5.0 1.2 1.2 2.0 2.1 3.3 4.3
50 6/10/15 -- 1.5 3.2 3.2 3.2 4.0 -- -- 1.5 2.0 2.5 3.6
5SY6...-7, 5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
2)
Characteristic C 0.5 6/10/15 T T T T T T T T T T T T
1 6/10/15 T T T T T T T T T T T T
1.5 6/10/15 T T T T T T T T T T T T
2 6/10/15 T T T T T T T T T T T T
3 6/10/15 3.2 3.2 TTTT2.5 T T T T T
4 6/10/15 3.2 3.2 TTTT2.5 T T T T T
6 6/10/15 3.2 3.2 7776/10
13.9
2.5 2.5 5.1 7.3 T T
8 6/10/15 2.5 2.5 5.4 5.4 5.4 6/9/2 2.3 3.7 3.8 3.9 5.6 8.6
10 6/10/15 2.5 2.5 5.4 5.4 5.4 6/9/2 2.0 2.0 3.0 3.4 5.6 8.6
13 6/10/15 2.5 2.5 4.3 4.3 4.3 7.1 1.5 1.5 2.5 3.4 4.5 5.8
16 6/10/15 2.0 2.5 4.0 4.0 4.0 7.1 1.5 1.5 2.5 3.1 4.0 5.1
20 6/10/15 2.0 2.0 3.7 3.7 3.7 6.3 1.5 1.5 2.0 2.5 3.9 5.0
25 6/10/15 2.0 2.0 3.6 3.6 3.6 5.5 1.5 1.5 2.0 2.5 3.5 4.6
32 6/10/15 2.0 2.0 3.5 3.5 3.5 5.5 1.5 1.5 2.0 2.5 3.4 4.5
40 6/10/15 1.5 1.5 3.3 3.3 3.3 5.1 1.2 1.2 2.0 2.5 3.3 4.3
50 6/10/15 -- 1.5 3.1 3.1 3.1 4.0 -- -- 1.5 2.5 2.5 3.6
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
2)
Characteristic D 2 10/15 2.4 666664.2 6 6 6 6 6
6 10/15 1.4 1.4 4.8 5662.3 4.1 4.2 4.2 4.3 6
10 10/15 1.3 1.3 4.5 5661.9 3.7 3.7 3.7 4 6
16 10/15 1.1 1.1 3.2 3.2 3.2 4.0 1.7 3.3 3.7 3.3 3.5 4.7
32 10/15 -- -- 2.3 2.3 2.3 4.0 -- -- -- 2.4 2.7 3.7
40 10/15 -- -- -- 2.1 2.1 3.8 -- -- -- -- 1.5 3
50 10/15 -- -- -- -- 2.0 2.8 -- -- -- -- -- 2.6
5SP4...-7
Characteristic C 80 10 -- -- -- 1.0 1.2 2.0 -- -- -- -- 1.2 1.5
100 10 -- -- -- -- 1.2 1.5 -- -- -- -- -- 1.5
5SP4...-8
Characteristic D 80 10 -- -- -- -- -- -- -- -- -- -- -- --
100 10 -- -- -- -- -- -- -- -- -- -- -- --
PH_03.book Seite 78 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
79
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
In the event of a short-circuit, selectivity up to the specified
values in kA exists between miniature circuit breakers and circuit
breakers/molded circuit breakers according to IEC/EN 60947-2.
Selectivity limit values of miniature circuit breakers/molded case circuit breakers/circuit breakers in kA
Values for 5SY8 on request.
T r full selectivity up to rated breaking capacity I
cn
of the downstream
protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
Valid for ETU 20/22.
3)
Valid for ETU 10/12/40/42.
4)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream
miniature
circuit breakers
Upstream molded case circuit breakers/circuit breakers
3VL3, TM 3VL4, TM 3VL5, TM 3VL5,
ETU
3VL6,
ETU
3VL7.
ETU
3VL8,
ETU
3WN1 3WN6
I
n
[A] 200 250 200 250 315 400 315 400 500 630 315 400 ...
800
400 ...
1250
800 ...
2500
315 ...
6300
315 ...
3200
I
i
[A] 2000 2500 2000 2500 3150 4000 3150 4000 5000 6300 3200 1575 ...
6400
15000 20000 3780 ...
75600
3780 ...
48000
I
cu
[kA] 55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
65 ...
100
65/75
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY4...-5, 5SY7...-5
Characteristic A
2 10 T T T T T T T T T T T -- T T T T
10 10 T T T T T T T T T T T -- T T T T
16 10 T T T T T T T T T T T -- T T T T
32 10 T T T T T T T T T T T -- T T T T
40 10 T T T T T T T T T T T -- T T T T
5SY6...-6, 5SY4...-6, 5SY7...-6, 5SJ4...-6HG40
4)
Characteristic B
6 6/10/15 T T T T T T T T T T T -- T T T T
10 6/10/15 T T T T T T T T T T T -- T T T T
13 6/10/15 T T T T T T T T T T T -- T T T T
16 6/10/15 T T T T T T T T T T T -- T T T T
20 6/10/15 T T T T T T T T T T T -- T T T T
25 6/10/15 T T T T T T T T T T T -- T T T T
32 6/10/15 T T T T T T T T T T T -- T T T T
40 6/10/15 6 6 6 T T T T T T T T -- T T T T
50 6/10/15 6 6 6/10
14.1
TTTTTTT/T/13.8
2)
or 14
3)
T-- T T T T
5SY6...-7, 5SY4...-7, 5SY7...-7, 5SJ4...-7HG..
4)
Characteristic C
0.5 6/10/15 T T T T T T T T T T T -- T T T T
1 6/10/15 T T T T T T T T T T T -- T T T T
1.5 6/10/15 T T T T T T T T T T T -- T T T T
2 6/10/15 T T T T T T T T T T T -- T T T T
3 6/10/15 T T T T T T T T T T T -- T T T T
4 6/10/15 T T T T T T T T T T T -- T T T T
6 6/10/15 T T T T T T T T T T T -- T T T T
8 6/10/15 T T T T T T T T T T T -- T T T T
10 6/10/15 T T T T T T T T T T T -- T T T T
13 6/10/15 T T T T T T T T T T T -- T T T T
16 6/10/15 T T T T T T T T T T T -- T T T T
20 6/10/15 T T T T T T T T T T T -- T T T T
25 6/10/15 T T T T T T T T T T T -- T T T T
32 6/10/15 6/10
11
T T T T T T T T T T -- T T T T
40 6/10/15 6/10 T T T T T T T T T T -- T T T T
50 6/10/15 6/10 T T TTTTTTT/T/14.2
2)
or T
3)
T-- T T T T
5SY4...-8, 5SY7...-8, 5SJ4...-8HG..
4)
Characteristic D
2 10/15 T T T T T T T T T T T T T T T T
6 10/15 T T T T T T T T T T T T T T T T
10 10/15 T T T T T T T T T T T T T T T T
16 10/15 T T T T T T T T T T T T T T T T
32 10/15 T T T T T T T T T T T T T T T T
40 10/15 T T T T T T T T T T T T T T T T
50 10/15 T T T T T T T T T T T T T T T T
5SP4...-7
Characteristic C
80 10 3 3 3 3 3 6 6.3 7.6 T8.8 8 T T T T T
100 10 3 3 3 3 3 5 5 6.8 T8.3 6 T T T T T
5SP4...-8
Characteristic D
80 10 3 3 2.5 3355.1 6.9 T7.2 6 T T T T T
100 10 -- 2.5 -- 3354.5 6.6 T 7 6 T T T T T
PH_03.book Seite 79 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
80 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream molded case circuit breakers 3VL1... [kA]
Miniature circuit breakers 3VL1
Releases TM
Rated current I
n
[A]
1)
16 20 25 32 40 50 63 80 100 125 160
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTTTT
2TTTTTTTTTTT
35.9 5.9 5.9 5.9 TTTTTTT
41.9 1.9 1.9 1.9 TTTTTTT
61.6 1.6 1.6 1.6 6.8 6.8 6.8 T T T T
81.4 1.4 1.4 1.4 4.8 4.8 4.8 T T T T
10 1.2 1.2 1.2 1.2 3.8 3.8 3.8 T T T T
13 1.1 1.1 1.1 1.1 3.1 3.1 3.1 6.7 6.7 6.7 T
16 --- 1112.7 2.7 2.7 5.4 5.4 5.4 T
20 --- --- 0.9 0.9 2.5 2.5 2.5 5.2 5.2 5.2 8.5
25 --- --- --- 0.9 2.4 2.4 2.4 4.6 4.6 4.6 7.4
32 --- --- --- --- 2223.9 3.9 3.9 6.5
40 --- --- --- --- --- 224445.4
50 --- --- --- --- --- --- 1.7 3335.4
63 --- --- --- --- --- --- --- 2.8 2.8 2.8 4.8
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
22.7 2.7 2.7 2.7 TTTTTTT
31.8 1.8 1.8 1.8 8.6 8.6 8.6 T T T T
41.6 1.6 1.6 1.6 6.4 6.4 6.4 T T T T
61.2 1.2 1.2 1.2 4.1 4.1 4.1 T T T T
80.9 0.9 0.9 0.9 2.3 2.3 2.3 6 6 6 T
10 0.9 0.9 0.9 0.9 2.3 2.3 2.3 6 6 6 T
13 0.9 0.9 0.9 0.9 2.3 2.3 2.3 4.4 4.4 4.4 8.3
16 --- 0.9 0.9 0.9 2.3 2.3 2.3 4.4 4.4 4.4 8.3
20 --- --- 0.8 0.8 2223.9 3.9 3.9 6.6
25 --- --- --- 0.8 2223.9 3.9 3.9 6.6
32 --- --- --- --- 1.8 1.8 1.8 3.4 3.4 3.4 6.1
40 --- --- --- --- --- 1.8 1.8 3.5 3.5 3.5 6.1
50 --- --- --- --- --- --- 1.5 3.2 3.2 3.2 4.9
63 --- --- --- --- --- --- --- 3.2 3.2 3.2 4.9
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 3.1 3.1 3.1 3.1 TTTTTTT
22.1 2.1 2.1 2.1 TTTTTTT
31.6 1.6 1.6 1.6 6.3 6.3 6.3 T T T T
41.3 1.3 1.3 1.3 4.5 4.5 4.5 T T T T
61.1 1.1 1.1 1.1 3.5 3.5 3.5 T T T T
80.7 0.7 0.7 0.7 2224.5 4.5 4.5 9.8
10 0.7 0.7 0.7 0.7 2224.5 4.5 4.5 9.8
13 0.7 0.7 0.7 0.7 2223.9 3.9 3.9 6.8
16 --- 0.7 0.7 0.7 2223.9 3.9 3.9 6.8
20 --- --- 0.7 0.7 1.8 1.8 1.8 3.6 3.6 3.6 6.2
25 --- --- --- 0.7 1.8 1.8 1.8 3.6 3.6 3.6 6.2
32 --- --- --- --- 1.9 1.9 1.9 3.8 3.8 3.8 6.2
40 --- --- --- --- --- 1.6 1.6 3.2 3.2 3.2 5.6
50 --- --- --- --- --- --- --- 2.4 2.4 2.4 4.4
63 --- --- --- --- --- --- --- 2.4 2.4 2.4 4.4
PH_03.book Seite 80 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
81
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/molded case circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream molded case circuit breakers 3VL2... [kA]
Miniature circuit breakers 3VL2
Releases TM ETU
Rated current I
n
[A]
1)
50 63 80 100 125 160 63 100 160
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTT
2TTTTTTTTT
3TTTTTT4.4 T T
44.5 4.5 9.8 TTT2.1 3.4 T
62.9 2.9 6.2 9.9 T T 1.7 2.6 8.2
82.4 2.4 4.3 6TT1.5 2.2 5.6
10 2.2 2.2 3.4 4.9 7.6 T1.3 1.9 4.4
13 2 2 2.9 4.1 5.7 9.2 1.3 1.8 4.1
16 1.6 1.6 2.7 3.3 4.7 6.4 1.1 1.5 3.4
20 1.5 1.5 2.3 3.1 4.4 6.1 1.1 1.5 3.1
25 1.4 1.4 2.2 2.9 4.1 5.7 1.1 1.4 2.9
32 1.3 1.3 1.9 2.6 3.4 4.7 11.3 2.6
40 1.2 1.2 1.9 2.6 3.5 4.6 11.3 2.6
50 --- 1.1 1.7 2.2 2.8 3.7 0.9 1.2 2.3
63 --- --- 1.5 22.6 3.4 --- 1.2 2.2
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTT
0.5 TTTTTTTTT
1TTTTTTTTT
1.6 TTTTTT6.8 T T
26.5 6.5 TTTT2.7 4.9 T
33.9 3.9 7.2 TTT23.1 9.8
43 3 5.8 8.4 T T 1.7 2.6 8.4
62.2 2.2 3.7 5.5 T T 1.4 2.1 5.3
81.5 1.5 2.2 2.9 5.2 7.3 1.1 1.4 3.1
10 1.5 1.5 2.2 2.9 5.2 7.3 1.1 1.4 3.1
13 1.5 1.5 2.2 2.9 4 6 1.1 1.4 3
16 1.5 1.5 2.2 2.9 4 6 1.1 1.4 3
20 1.3 1.3 1.9 2.6 3.5 4.8 11.3 2.6
25 1.3 1.3 1.9 2.6 3.5 4.8 11.3 2.6
32 1.1 1.1 1.7 2.3 34.2 0.9 1.3 2.5
40 1.1 1.1 1.7 2.3 3.1 4.3 0.9 1.2 2.4
50 --- 11.5 2.1 2.9 3.7 0.9 1.2 2.3
63 --- --- 1.5 2.1 2.9 3.7 --- 1.2 2.3
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTT
0.5 TTTTTTTTT
1TTTTTT8.4 T T
1.6 TTTTTT2.8 6.2 T
24.4 4.4 TTTT2.3 3.7 T
32.9 2.9 5.9 9.5 T T 1.8 2.7 8.5
42.5 2.5 4.2 5.9 T T 1.5 2.3 5.9
61.9 1.9 3.3 4.4 6.8 T1.3 1.9 4.3
81.2 1.2 1.9 2.6 3.8 5.5 11.3 2.6
10 1.2 1.2 1.9 2.6 3.8 5.5 11.3 2.6
13 1.2 1.2 1.9 2.6 3.5 4.8 11.3 2.6
16 1.2 1.2 1.9 2.6 3.5 4.8 11.3 2.6
20 1.1 1.1 1.7 2.3 3.1 4.4 0.9 1.3 2.5
25 1.1 1.1 1.7 2.3 3.1 4.4 0.9 1.3 2.5
32 1.1 1.1 1.9 2.5 3.4 4.5 0.9 1.2 2.5
40 1 1 1.6 22.9 3.8 0.9 1.2 2.3
50 --- --- --- 1.7 2.3 2.8 --- --- 2.1
63 --- --- --- 1.7 2.3 2.8 --- --- 2.1
PH_03.book Seite 81 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
82 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream molded case circuit breakers 3VL3... [kA] or 3VL4... [kA]
Miniature circuit breakers 3VL3 3VL4
Releases TM ETU TM ETU
Rated current I
n
[A]
1)
200 250 200 250 200 250 315 400 315 400
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TTTTTTTTTT
8TT9.3 TTTTTTT
10 TT7.7 TTTTTTT
13 TT6.7 TTTTTTT
16 TT5.2 8TTTTTT
20 TT4.9 7.9 T T T T T T
25 TT4.3 7TTTTTT
32 TT3.8 5.9 T T T T T T
40 TT3.7 5.1 T T T T T T
50 TT3.1 4.9 T T T T T T
63 9.9 T34.3 T T T T T T
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTTT
0.5 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TT8.7 TTTTTTT
8TT5.9 8.9 T T T T T T
10 TT5.9 8.9 T T T T T T
13 TT4.4 7.3 T T T T T T
16 TT4.4 7.3 T T T T T T
20 TT3.8 5.9 T T T T T T
25 TT3.8 5.9 T T T T T T
32 TT3.4 5.4 T T T T T T
40 TT3.4 5.2 T T T T T T
50 8.3 T3.2 4.3 T T T T 9.3 9.2
63 8.3 T3.2 4.3 T T T T 9.3 9.2
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTT
0.5 TTTTTTTTTT
1TTTTTTTTTT
1.6 TTTTTTTTTT
2TTTTTTTTTT
3TTTTTTTTTT
4TTTTTTTTTT
6TT7.4 TTTTTTT
8TT4.3 7.3 T T T T T T
10 TT4.3 7.3 T T T T T T
13 TT3.8 6.1 T T T T T T
16 TT3.8 6.1 T T T T T T
20 TT3.6 5.5 T T T T T T
25 TT3.6 5.5 T T T T T T
32 TT3.6 5.4 T T T T T T
40 TT3.2 4.7 T T T T T T
50 8T2.8 4TTTT9.2 9.1
63 8T2.8 4TTTT9.2 9.1
PH_03.book Seite 82 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
83
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/molded case circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream molded case circuit breakers 3VL5/6/7/8... [kA]
Miniature circuit breakers 3VL5 3VL6 3VL7 3VL8
Releases TM ETU ETU ETU ETU
Rated current I
n
[A]
1)
315 400 500 630 630 800 1000 1250 1600
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1T T T T T T T T T
2T T T T T T T T T
3T T T T T T T T T
4T T T T T T T T T
6T T T T T T T T T
8T T T T T T T T T
10 T T T T T T T T T
13 T T T T T T T T T
16 T T T T T T T T T
20 T T T T T T T T T
25 T T T T T T T T T
32 T T T T T T T T T
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 T T T T T T T T T
0.5 T T T T T T T T T
1T T T T T T T T T
1.6 T T T T T T T T T
2T T T T T T T T T
3T T T T T T T T T
4T T T T T T T T T
6T T T T T T T T T
8T T T T T T T T T
10 T T T T T T T T T
13 T T T T T T T T T
16 T T T T T T T T T
20 T T T T T T T T T
25 T T T T T T T T T
32 T T T T T T T T T
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 T T T T T T T T T
0.5 T T T T T T T T T
1T T T T T T T T T
1.6 T T T T T T T T T
2T T T T T T T T T
3T T T T T T T T T
4T T T T T T T T T
6T T T T T T T T T
8T T T T T T T T T
10 T T T T T T T T T
13 T T T T T T T T T
16 T T T T T T T T T
20 T T T T T T T T T
25 T T T T T T T T T
32 T T T T T T T T T
40 T T T T T T T T T
50 T T T T T T T T T
63 T T T T T T T T T
PH_03.book Seite 83 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
84 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL3... for the
upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Releases ETU320, ETU330, ETU340, ETU350, ETU550, ETU560
Rated current I
n
[A]
1)
25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SL3...-.
Characteristic B
I
cn
[kA] = 4.5
6TTTTTTTTTTT
10 3.7 TTT4TTTTTT
13 3.7 TTT4TTTTTT
16 2.8 TTT3.2 TTTTTT
20 2.7 TTT3.1 TTTTTT
25 --- TTT--- TTTTTT
32 --- 3.5 T T --- 3.6 TTTTT
40 --- --- T T --- --- TTTTT
50 --- --- T T --- --- TTTTT
63 --- --- --- T--- --- --- T T T T
Circuit breaker type:
5SL3...-.
Characteristic C
I
cn
[kA] = 4.5
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
6TTTTTTTTTTT
84TTTTTTTTTT
10 3.7 TTT4TTTTTT
13 3.7 TTT4TTTTTT
16 2.8 TTT3.2 TTTTTT
20 2.7 TTT3.1 TTTTTT
25 --- TTT--- TTTTTT
32 --- 3.5 T T --- 3.6 TTTTT
40 --- --- T T --- --- TTTTT
50 --- --- T T --- --- TTTTT
63 --- --- --- T--- --- --- T T T T
PH_03.book Seite 84 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
85
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Rated current I
n
[A]
1)
25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
6TTTTTTTTTTT
8TTTTTTTTTTT
10 TTTTTTTTTTT
13 5.5 TTT5.9 T T T T T T
16 4.4 TTT4.9 T T T T T T
20 4.2 T884.6 T T T T T T
25 --- T88--- T T T T T T
32 --- T88--- T T T T T T
40 --- --- 8 8 --- --- TTTTT
50 --- --- 8 8 --- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
6TTTTTTTTTTT
85.1 TTT5.6 T T T T T T
10 5.1 TTT5.6 T T T T T T
13 3.7 TTT4TTTTTT
16 3.7 TTT4TTTTTT
20 3T883.5 7.3 TTTTT
25 --- T88--- 7.3 TTTTT
32 --- 7.1 8 8 --- 6.9 TTTTT
40 --- --- 8 8 --- --- TTTTT
50 --- --- 8 8 --- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
66.7 TTT7.1 T T T T T T
83.3 TTT3.9 T T T T T T
10 3.3 TTT3.9 T T T T T T
13 3.2 TTT3.6 T T T T T T
16 3.2 TTT3.6 T T T T T T
20 2.6 T883.1 T T T T T T
25 --- T88--- T T T T T T
32 --- T88--- T T T T T T
40 --- --- 8 8 --- --- TTTTT
50 --- --- 8 8 --- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
PH_03.book Seite 85 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
86 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Rated current I
n
[A]
1)
25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
64.6 TTT5TTTTTT
10 3.7 TTT4TTTTTT
13 3.7 TTT4TTTTTT
16 2.8 TTT3.2 TTTTTT
20 2.7 TTT3.1 TTTTTT
25 --- 5.3 TT--- 5.4 TTTTT
32 --- 3.5 TT--- 3.6 TTTTT
40 --- --- TT--- --- TTTTT
50 --- --- TT--- --- TTTTT
63 --- --- --- T--- --- --- T T T T
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
24.4 TTT4.6 TTTTTT
34TTT4.3 TTTTTT
43.9 TTT4.1 TTTTTT
63.9 TTT4.1 TTTTTT
83.8 TTT4.4 TTTTTT
10 3.7 TTT4TTTTTT
13 3.7 TTT4TTTTTT
16 2.8 TTT3.2 TTTTTT
20 2.7 TTT3.1 TTTTTT
25 --- 5.3 TT--- 5.4 TTTTT
32 --- 3.5 TT--- 3.6 TTTTT
40 --- --- TT--- --- TTTTT
50 --- --- TT--- --- TTTTT
63 --- --- --- T--- --- --- T T T T
Selectivity of the 5SP4... for the
upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Rated current I
n
[A]
1)
25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SP4...-.
Characteristic B
I
cn
[kA] = 10
80 --- --- --- T--- --- --- T T T T
100 --- --- --- --- --- --- --- --- T T T
125 --- --- --- --- --- --- --- --- T T T
Circuit breaker type:
5SP4...-.
Characteristic C
I
cn
[kA] = 10
80 --- --- --- T--- --- --- T T T T
100 --- --- --- --- --- --- --- --- T T T
125 --- --- --- --- --- --- --- --- T T T
Circuit breaker type:
5SP4...-.
Characteristic D
I
cn
[kA] = 10
80 --- --- --- --- --- --- --- 9 T T T
100 --- --- --- --- --- --- --- --- T T T
PH_03.book Seite 86 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
87
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
Selectivity of the 5SY4... for the upstream molded case circuit breakers 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Rated current I
n
[A] 25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SY4...-.
Characteristic A
I
cn
[kA] = 10
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
6TTTTTTTTTTT
8TTTTTTTTTTT
10 9.4 TTTTTTTTTT
13 6.2 TTT6.8 TTTTTT
16 5.4 TTT5.7 TTTTTT
20 4.6 T884.9 TTTTTT
25 --- T88--- TTTTTT
32 --- T88--- TTTTTT
40 --- --- 88--- --- TTTTT
50 --- --- 88--- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SY4...-.
Characteristic B
I
cn
[kA] = 10
6TTTTTTTTTTT
10 5.7 TTT6.1 TTTTTT
13 4.5 TTT4.2 TTTTTT
16 3.7 TTT3.8 TTTTTT
20 3.7 7.7 883.8 7.8 TTTTT
25 --- 7.6 88--- 7.6 TTTTT
32 --- 7.5 88--- 6.7 TTTTT
40 --- --- 88--- --- TTTTT
50 --- --- 88--- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SY4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
4TTTTTTTTTTT
65.4 TTT5.7 TTTTTT
84.9 TTT5.2 TTTTTT
10 4.7 TTT5TTTTTT
13 3.6 TTT3.9 TTTTTT
16 3.4 TTT3.5 TTTTTT
20 35.4 883.2 5.5 TTTTT
25 --- 5.1 88--- 5.3 TTTTT
32 --- 4.9 88--- 5TTTTT
40 --- --- 88--- --- TTTTT
50 --- --- 88--- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SY4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
48.7 TTT9.7 TTTTTT
65.9 TTT7.1 TTTTTT
84.6 TTT4.9 TTTTTT
10 4TTT4.5 TTTTTT
13 4.2 TTT4.3 TTTTTT
16 3.7 TTT4TTTTTT
20 35.2 883.2 5.2 TTTTT
25 --- 4.5 88--- 4.6 TTTTT
32 --- 488--- 4.2 TTTTT
40 --- --- 88--- --- 9TTTT
50 --- --- 88--- --- 8.5 T T T T
63 --- --- --- 8--- --- --- T T T T
PH_03.book Seite 87 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
88 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/molded case circuit breakers in kA
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SY7... for the
upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Rated current I
n
[A]
1)
25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SY7...-.
Characteristic B
I
cn
[kA] = 15
6TTTTTTTTTTT
10 5.7 TTT6.1 TTTTTT
13 4.5 TTT4.2 TTTTTT
16 3.7 14 T T 3.8 14 TTTTT
20 3.7 7.7 8 8 4.1 7.8 TTTTT
25 --- 7.6 8 8 --- 7.7 TTTTT
32 --- 7.5 8 8 --- 6.7 TTTTT
40 --- --- 8 8 --- --- TTTTT
50 --- --- 8 8 --- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SY7...-.
Characteristic C
I
cn
[kA] = 15
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
48TTTTTTTTTT
65.4 TTT5.7 TTTTTT
84.9 TTT5.2 TTTTTT
10 4.7 TTT5TTTTTT
13 3.6 10 T T 3.9 10 TTTTT
16 3.4 8TT3.5 8TTTTT
20 35.4 8 8 3.2 5.5 TTTTT
25 --- 5.1 8 8 --- 5.3 TTTTT
32 --- 4.9 8 8 --- 5TTTTT
40 --- --- 8 8 --- --- TTTTT
50 --- --- 8 8 --- --- TTTTT
63 --- --- --- 8--- --- --- T T T T
Circuit breaker type:
5SY7...-.
Characteristic D
I
cn
[kA] = 15
0.3 TTTTTTTTTTT
0.5 TTTTTTTTTTT
1TTTTTTTTTTT
1.6 TTTTTTTTTTT
2TTTTTTTTTTT
3TTTTTTTTTTT
48.7 TTT9.7 TTTTTT
65.9 TTT7.1 TTTTTT
84.6 TTT4.9 TTTTTT
10 4.2 TTT4.5 TTTTTT
13 4TTT4.3 TTTTTT
16 3.7 11 TT411 TTTTT
20 35.2 8 8 3.2 5.2 TTTTT
25 --- 4.6 8 8 --- 4.8 TTTTT
32 --- 488--- 4.2 TTTTT
40 --- --- 8 8 --- --- 9TTTT
50 --- --- 8 8 --- --- 8.5 T T T T
63 --- --- --- 8--- --- --- T T T T
PH_03.book Seite 88 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
89
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity of miniature circuit breakers/miniature circuit breakers
Within narrow limits, miniature circuit breakers also offer
selectivity to each other in a fuseless distribution board.
The following table shows the short-circuit current in kA up to
which there is selectivity between series-connected miniature
circuit breakers at 230 V AC.
This depends on the let-through peak current Î of the
downstream miniature circuit breaker and on the tripping current
of the upstream miniature circuit breaker.
Selectivity limit values of miniature circuit breakers/miniature circuit breakers in kA
T r full selectivity up to rated breaking capacity I
cn
of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream miniature circuit breakers Upstream miniature circuit breakers
5SY4...-7
Characteristic C
5SP4...-7
Characteristic C
5SP4...-8
Characteristic D
I
n
[A] 20 25 32 40 50 63 80 100 80 100
I
cu
[kA] 20 15 10
I
i
[A] 200 250 320 400 500 630 800 1000 1600 2000
I
n
[A]
1)
I
cn
[kA] Selectivity limits [kA]
5SY....-6 (without 5SY60..-6), 5SJ4...-6HG40
2)
Characteristic B 6 6/10/15 0.2 0.2 0.3 0.5 0.5 0.6 0.8 1.5 3 5
10 6/10/15 0.2 0.2 0.3 0.5 0.5 0.6 0.8 1.2 3 4
13 6/10/15 0.2 0.2 0.3 0.4 0.5 0.5 0.8 1.2 2 3
16 6/10/15 0.2 0.2 0.3 0.4 0.5 0.5 0.8 1.2 2 3
20 6/10/15 -- 0.2 0.3 0.4 0.5 0.5 0.8 1.2 2 3
25 6/10/15 -- -- -- 0.4 0.4 0.6 0.6 1.2 1.5 3
32 6/10/15 -- -- -- 0.4 0.4 -- 0.6 1.2 1.5 3
40 6/10/15 -- -- -- -- 0.4 -- 0.6 1.2 1.5 2.5
50 6/10/15 -- -- -- -- -- -- 0.6 11.5 2.5
5SY....-7 (without 5SY60..-7), 5SJ4...-7HG..
2)
Characteristic C 0.5 6/10/15 0.2 0.3 0.5 0.8 0.8 0.8 1.2 4TT
1 6/10/15 0.2 0.3 0.5 0.8 0.8 0.8 1.2 4TT
1.5 6/10/15 0.2 0.3 0.5 0.8 0.8 0.8 1.2 4TT
2 6/10/15 0.2 0.3 0.5 0.8 0.8 0.8 1.2 4TT
3 6/10/15 0.2 0.2 0.3 0.5 0.5 0.8 0.8 1.5 3 4
4 6/10/15 0.2 0.2 0.3 0.5 0.5 0.6 0.8 1.5 3 4
6 6/10/15 0.2 0.2 0.3 0.5 0.5 0.6 0.8 1.5 3 4
8 6/10/15 0.2 0.2 0.3 0.4 0.4 0.6 0.6 1.2 2.5 3
10 6/10/15 0.2 0.2 0.3 0.4 0.4 0.6 0.6 1.2 2.5 3
13 6/10/15 0.2 0.2 0.3 0.4 0.4 0.5 0.6 1.2 2 3
16 6/10/15 0.2 0.2 0.3 0.4 0.4 0.5 0.6 1.2 2 3
20 6/10/15 -- 0.2 0.3 0.4 0.4 0.5 0.6 1.2 2 3
25 6/10/15 -- -- -- 0.3 0.4 0.5 0.6 11.5 2.5
32 6/10/15 -- -- -- 0.3 0.4 -- 0.6 11.5 2.5
40 6/10/15 -- -- -- -- -- -- -- 0.8 1.5 2
50 6/10/15 -- -- -- -- -- -- -- 0.8 1.5 2
63 6/10/15 -- -- -- -- -- -- -- 0.8 1.2 1.5
PH_03.book Seite 89 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
90 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream miniature circuit breaker 5SP4... [kA]
Miniature circuit breakers 5SP4
Characteristic C D
Rated making and breaking
capacity
I
cu
[A] 10
Rated current I
n
[A]
1)
80 100 125 80 100
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1TTTTT
2TTTTT
32.2 T T T T
41.2 2.6 2.9 6.6 9.7
612.1 2.3 4.3 6.9
80.9 1.8 23.3 4.6
10 0.9 1.6 1.7 2.8 4
13 0.8 1.4 1.6 2.6 3.6
16 0.7 1.3 1.4 2.3 3
20 0.7 1.2 1.3 2.1 2.8
25 0.7 1.1 1.2 22.7
32 0.6 11.1 1.8 2.4
40 0.6 11.1 1.8 2.4
50 0.6 111.6 2.1
63 0.6 0.9 11.5 2
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 TTTTT
0.5 TTTTT
1TTTTT
1.6 3.1 T T T T
21.6 3.9 4.5 T T
31.2 2.5 2.8 68.9
412.1 2.4 4.4 7
60.9 1.6 1.8 34.5
80.7 1.2 1.2 22.7
10 0.7 1.2 1.2 22.7
13 0.7 1.2 1.2 22.7
16 0.7 1.2 1.2 22.7
20 0.6 11.1 1.8 2.4
25 0.6 11.1 1.8 2.4
32 0.6 0.9 11.6 2.2
40 0.6 0.9 11.6 2.2
50 --- 0.9 0.9 1.5 2
63 --- 0.9 0.9 1.5 2
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 TTTTT
0.5 TTTTT
13.3 T T T T
1.6 1.7 4.1 4.8 T T
21.4 2.9 3.2 7.6 T
31.1 2.2 2.4 4.5 7.2
40.9 1.8 23.6 5.2
60.8 1.4 1.6 2.8 3.9
80.6 11.1 1.8 2.4
10 0.6 11.1 1.8 2.4
13 0.6 11.1 1.8 2.4
16 0.6 11.1 1.8 2.4
20 0.6 0.9 11.6 2.2
25 0.6 0.9 11.6 2.2
32 0.6 0.9 11.7 2.3
40 --- 0.9 --- 1.5 2
50 --- --- --- --- 1.5
63 --- --- --- --- 1.5
PH_03.book Seite 90 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
91
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream miniature circuit breaker 5SY7... [kA]
Miniature circuit breakers 5SY7
Characteristic B
Rated making and breaking
capacity
I
cu
[A] 15 20 25
Rated current I
n
[A]
1)
20 25 32 40 50 63 20 25 32 40 50 63 20 25 32 40 50 63
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1--- --- --- --- T T --- --- --- T--- --- --- 0.6 5.7 --- --- ---
2--- --- --- --- 0.5 0.7 --- --- --- 0.4 --- --- --- --- --- --- --- ---
3--- --- --- --- --- 0.4 --- --- --- --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- --- --- --- T T --- --- --- T--- --- 0.9 1.4 6.6 --- --- ---
0.5 --- --- --- --- T T --- --- --- T--- --- 0.9 1.4 6.6 --- --- ---
1--- --- --- --- 11.2 --- --- --- 0.6 --- --- --- --- --- --- --- ---
1.6 --- --- --- --- 0.4 0.5 --- --- --- --- --- --- --- --- --- --- --- ---
2--- --- --- --- --- 0.4 --- --- --- --- --- --- --- --- --- --- --- ---
3--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 --- --- --- --- T T --- --- --- T--- --- 0.6 6.4 7.2 --- --- ---
0.5 --- --- --- --- T T --- --- --- T--- --- 0.6 6.4 7.2 --- --- ---
1--- --- --- --- 0.5 0.6 --- --- --- --- --- --- --- --- --- --- --- ---
1.6 --- --- --- --- 0.4 0.5 --- --- --- --- --- --- --- --- --- --- --- ---
2--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
3--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
PH_03.book Seite 91 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
92 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream miniature circuit breaker 5SY7... [kA]
Miniature circuit breakers 5SY7
Characteristic C
Rated making and breaking
capacity
I
cu
[A] 15 20 25
Rated current I
n
[A]
1)
16 20 25 32 40 50 63 16 20 25 32 40 50 63 16 20 25 32 40 50 63
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1--- --- --- --- --- T T --- --- --- --- T--- --- 6 T T T --- --- ---
2--- --- --- --- --- 1.3 2.1 --- --- --- --- 1.1 --- --- --- --- 0.5 0.5 --- --- ---
3--- --- --- --- --- 0.7 0.9 --- --- --- --- 0.6 --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- 0.6 0.7 --- --- --- --- 0.5 --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- 0.5 0.6 --- --- --- --- 0.4 --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- 0.5 0.6 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- 0.5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- 0.4 0.5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- 0.5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- 0.5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- --- --- --- --- T T --- --- --- --- T--- --- 6.6 T T T --- --- ---
0.5 --- --- --- --- --- T T --- --- --- --- T--- --- 6.6 T T T --- --- ---
1--- --- --- --- --- 1.7 2.4 --- --- --- --- 1.4 --- --- --- --- 0.9 1--- --- ---
1.6 --- --- --- --- --- 0.8 1.1 --- --- --- --- 0.7 --- --- --- --- 0.4 0.4 --- --- ---
2--- --- --- --- --- 0.7 0.8 --- --- --- --- 0.6 --- --- --- --- --- --- --- --- ---
3--- --- --- --- --- 0.5 0.7 --- --- --- --- 0.4 --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- 0.5 0.6 --- --- --- --- 0.4 --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- --- 0.6 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 --- --- --- --- --- T T --- --- --- --- T--- --- 7.4 T T T --- --- ---
0.5 --- --- --- --- --- T T --- --- --- --- T--- --- 7.4 T T T --- --- ---
1--- --- --- --- --- 11.3 --- --- --- --- 0.8 --- --- --- --- 0.5 0.5 --- --- ---
1.6 --- --- --- --- --- 0.8 0.9 --- --- --- --- 0.7 --- --- --- --- --- --- --- --- ---
2--- --- --- --- --- 0.6 0.7 --- --- --- --- 0.5 --- --- --- --- --- --- --- --- ---
3--- --- --- --- --- 0.5 0.6 --- --- --- --- 0.4 --- --- --- --- --- --- --- --- ---
4--- --- --- --- --- --- 0.6 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
6--- --- --- --- --- 0.4 0.5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
8--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
10 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
32 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
PH_03.book Seite 92 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
93
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL4... for the
upstream miniature circuit breaker 5SY7... [kA]
Miniature circuit breakers 5SY7
Characteristic D
Rated making and breaking
capacity
I
cu
[A] 15 20 25
Rated current I
n
[A]
1)
16 20 25 32 40 50 63 16 20 25 32 40 50 63 16 20 25 32 40 50 63
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
1--- --- --- --- --- TT--- --- --- --- T--- --- T T T T --- --- ---
2--- --- --- --- --- TT--- --- --- --- T--- --- 0.8 11.3 3.2 --- --- ---
3--- --- --- --- --- 3.8 8.9 --- --- --- --- 2.1 --- --- 0.5 0.5 0.7 1.1 --- --- ---
4--- --- --- --- --- 1.8 2.4 --- --- --- --- 1.3 --- --- --- 0.4 0.6 0.8 --- --- ---
6--- --- --- --- --- 1.4 1.9 --- --- --- --- 1.1 --- --- --- 0.4 0.5 0.7 --- --- ---
8--- --- --- --- --- 1.3 1.6 --- --- --- --- 1--- --- --- --- 0.5 0.7 --- --- ---
10 --- --- --- --- --- 1.2 1.4 --- --- --- --- 0.9 --- --- --- --- 0.4 0.6 --- --- ---
13 --- --- --- --- --- 1.1 1.3 --- --- --- --- 0.9 --- --- --- --- 0.4 0.6 --- --- ---
16 --- --- --- --- --- 11.2 --- --- --- --- 0.8 --- --- --- --- --- 0.6 --- --- ---
20 --- --- --- --- --- 11.2 --- --- --- --- 0.8 --- --- --- --- --- 0.5 --- --- ---
25 --- --- --- --- --- 0.9 1.1 --- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
32 --- --- --- --- --- 0.8 1--- --- --- --- 0.7 --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- 0.8 1--- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- 1--- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic C
I
cn
[kA] = 10
0.3 --- --- --- --- --- TT--- --- --- --- T--- --- T T T T --- --- ---
0.5 --- --- --- --- --- TT--- --- --- --- T--- --- T T T T --- --- ---
1--- --- --- --- --- TT--- --- --- --- T--- --- 1.2 1.3 1.7 3.7 --- --- ---
1.6 --- --- --- --- --- 6.4 T--- --- --- --- 3--- --- 0.6 0.6 0.8 1.4 --- --- ---
2--- --- --- --- --- 2.4 3.2 --- --- --- --- 1.5 --- --- 0.4 0.5 0.7 0.9 --- --- ---
3--- --- --- --- --- 1.7 2.3 --- --- --- --- 1.2 --- --- --- 0.4 0.5 0.8 --- --- ---
4--- --- --- --- --- 1.4 2--- --- --- --- 1.1 --- --- --- 0.4 0.5 0.7 --- --- ---
6--- --- --- --- --- 1.2 1.5 --- --- --- --- 0.9 --- --- --- --- 0.4 0.6 --- --- ---
8--- --- --- --- --- 0.9 1.1 --- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
10 --- --- --- --- --- 0.9 1.1 --- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
13 --- --- --- --- --- 0.9 1.1 --- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
16 --- --- --- --- --- 0.9 1.1 --- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
20 --- --- --- --- --- 0.9 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
25 --- --- --- --- --- 0.9 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
32 --- --- --- --- --- 0.8 1--- --- --- --- 0.6 --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- 0.8 0.9 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- 0.9 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL4...-.
Characteristic D
I
cn
[kA] = 10
0.3 --- --- --- --- --- TT--- --- --- --- T--- --- T T T T --- --- ---
0.5 --- --- --- --- --- TT--- --- --- --- T--- --- T T T T --- --- ---
1--- --- --- --- --- 8.7 T--- --- --- --- 2.9 --- --- 0.6 0.7 11.6 --- --- ---
1.6 --- --- --- --- --- 2.6 3.7 --- --- --- --- 1.6 --- --- 0.5 0.6 0.8 1.1 --- --- ---
2--- --- --- --- --- 2.1 2.7 --- --- --- --- 1.4 --- --- 0.4 0.5 0.6 0.9 --- --- ---
3--- --- --- --- --- 1.5 2--- --- --- --- 1.1 --- --- --- 0.4 0.5 0.8 --- --- ---
4--- --- --- --- --- 1.3 1.7 --- --- --- --- 0.9 --- --- --- --- --- 0.7 --- --- ---
6--- --- --- --- --- 1.1 1.4 --- --- --- --- 0.8 --- --- --- --- --- 0.6 --- --- ---
8--- --- --- --- --- 0.8 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
10 --- --- --- --- --- 0.8 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
13 --- --- --- --- --- 0.8 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
16 --- --- --- --- --- 0.8 1--- --- --- --- 0.7 --- --- --- --- --- 0.5 --- --- ---
20 --- --- --- --- --- 0.8 0.9 --- --- --- --- 0.6 --- --- --- --- --- 0.5 --- --- ---
25 --- --- --- --- --- 0.8 0.9 --- --- --- --- 0.6 --- --- --- --- --- 0.5 --- --- ---
32 --- --- --- --- --- 0.8 0.9 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
40 --- --- --- --- --- --- 0.9 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
PH_03.book Seite 93 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
94 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream miniature circuit breaker 5SP4... [kA]
Miniature circuit breakers 5SP4
Characteristic C D
Rated making and breaking
capacity
I
cu
[A] 10
Rated current I
n
[A]
1)
80 100 125 80 100
Circuit breaker type:
5SL6..-.
Characteristic B
I
cn
[kA] = 6
611.3 1.4 2 3
10 11.2 1.3 22.7
13 11.2 1.3 22.7
16 111.1 22.3
20 111.1 22.3
25 111.1 22.2
32 111.1 22.1
40 11.1 1.1 22.3
50 11122
63 --- 0.9 1 1 1.9
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 TTTTT
1TTTTT
1.6 13.5 4.4 T T
212.2 2.4 4 T
311.8 2 2 4.9
411.7 1.9 34.7
611.7 1.9 34.7
811.2 1.3 22.8
10 11.2 1.3 22.7
13 11.2 1.3 22.7
16 111.1 22.3
20 111.1 22.3
25 111.1 22.2
32 111.1 22.1
40 11.1 1.1 22.3
50 11122
63 --- 0.9 1 1 1.9
PH_03.book Seite 94 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
95
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Selectivity limit values of miniature circuit breakers/miniature circuit breakers
T r full selectivity up to I
cu
/I
cn
rated short-circuit breaking capacity of the downstream protective device.
1)
In 240/415 V, 50 Hz systems, the selectivity limits are reduced by 10 %.
The selectivity limits for adjustable releases apply to the maximum value,
I
n
= rated current. I
i
r tripping current.
Selectivity of the 5SL6... for the
upstream miniature circuit breaker 5SY7... [kA]
Miniature circuit breakers 5SY7
Characteristic B C D
Rated making and breaking
capacity
I
cu
[A] 15 20 25 15 20 25 15 20 25
Rated current I
n
[A]
1)
50 63 40 16 20 25 32 50 63 40 16 20 25 32 50 63 40 16 20 25 32
Circuit breaker type:
5SL6..-.
Characteristic B
I
cn
[kA] = 6
60.2 0.3 0.2 --- 0.1 0.1 0.1 0.4 0.5 0.3 0.1 0.2 0.2 0.2 1.1 1.3 0.9 0.3 0.3 0.4 0.6
10 0.2 0.3 0.2 --- 0.1 0.1 0.1 0.4 0.5 0.3 0.1 0.2 0.2 0.2 11.2 0.8 0.3 0.3 0.4 0.6
13 --- 0.3 --- --- --- --- --- 0.4 0.5 0.3 --- --- --- --- 11.2 0.8 0.3 0.3 0.4 0.5
16 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- 0.3 0.4 0.5
20 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- --- 0.3 0.5
25 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- --- --- 0.5
32 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 1.1 0.7 --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.9 1.1 --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1--- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.5 1.8 2.4 1.3 0.2 0.4 0.5 0.8 TT40.7 1.1 1.5 1.6 TTT2.7 3.1 T T
10.8 0.9 0.6 0.1 0.2 0.3 0.4 1.3 2.2 1.1 0.4 0.5 0.7 0.7 TTT0.9 11.3 2.9
1.6 0.4 0.4 0.3 0.1 0.1 0.2 0.2 0.7 0.9 0.6 0.2 0.3 0.4 0.4 2.3 3.3 1.5 0.5 0.5 0.7 1
20.3 0.4 0.3 0.1 0.1 0.1 0.2 0.6 0.8 0.5 0.2 0.2 0.3 0.3 1.6 2.1 1.2 0.4 0.4 0.6 0.9
30.3 0.3 0.2 --- 0.1 0.1 0.2 0.5 0.7 0.4 0.2 0.2 0.3 0.3 1.4 1.8 1.1 0.4 0.4 0.5 0.8
40.3 0.3 0.2 --- 0.1 0.1 0.2 0.5 0.7 0.4 0.2 0.2 0.3 0.3 1.3 1.7 1.1 0.4 0.4 0.5 0.8
60.3 0.3 0.2 --- 0.1 0.1 0.2 0.5 0.7 0.4 0.2 0.2 0.3 0.3 1.3 1.7 1.1 0.4 0.4 0.5 0.8
80.2 0.3 0.2 --- 0.1 0.1 0.1 0.4 0.5 0.3 0.1 0.2 0.2 0.2 11.2 0.8 0.3 0.3 0.4 0.6
10 0.2 0.3 0.2 --- 0.1 0.1 0.1 0.4 0.5 0.3 0.1 0.2 0.2 0.2 11.2 0.8 0.3 0.3 0.4 0.6
13 --- 0.3 --- --- --- --- --- 0.4 0.5 0.3 --- --- --- --- 11.2 0.8 0.3 0.3 0.4 0.5
16 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- 0.3 0.4 0.5
20 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- --- 0.3 0.5
25 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 10.7 --- --- --- 0.5
32 --- --- --- --- --- --- --- 0.4 0.4 0.3 --- --- --- --- 0.9 1.1 0.7 --- --- --- ---
40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.9 1.1 --- --- --- --- ---
50 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1--- --- --- --- ---
63 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
PH_03.book Seite 95 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
96 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Back-up protection of miniature circuit breakers/fuses
If the maximum short-circuit current of the miniature circuit
breaker at the installation location is unknown, or if the specified
rated switching capacity is exceeded, an additional protective
device must be connected upstream as back-up protection to
prevent overloading of the miniature circuit breaker. This is
usually a fuse.
The following table shows the short-circuit currents – in kA –
up to which back-up protection is guaranteed when using fuses
according to DIN VDE 0636-2 and DIN VDE 0636-3.
Back-up protection limit values of miniature circuit breakers/fuses in kA
1)
Up to the respective I
cu
according to the table "Rated switching capacity" on page 28.
2)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream miniature circuit breakers Upstream fuse
I
n
[A]
1)
50 A 63 A 80 A 100 A 125 A 160 A >160 A
5SY6 (without 5SY60)
0.3 ... 4 No back-up protection required
1)
6 50 50 50 50 50 35 30
8 50 50 50 50 50 35 15
10 50 50 50 50 50 35 15
13 50 50 50 35 35 30 15
16 50 50 50 35 30 30 15
20 50 50 50 35 25 25 15
25 50 50 50 35 30 25 15
32 50 50 50 35 30 25 15
40 50 50 50 50 25 15 10
50 50 50 50 50 25 15 10
63 50 50 35 25 25 15 10
5SY4, 5SY7, 5SY8, 5SJ4...-.HG..
2)
0.3 ... 6 No back-up protection required
1)
8 50 50 50 50 45 45 40
10 50 50 50 50 45 45 40
13 50 50 50 45 40 35 30
16 50 50 50 45 40 35 30
20 50 50 50 40 35 30 30
25 50 50 50 40 35 30 30
32 50 50 50 45 40 30 30
40 50 50 50 45 40 30 20
50 50 50 50 40 35 25 20
63 50 50 45 40 35 25 20
Test circuit data: Test cycle:
U
p
= 250 V Acc. to EN 60947-2 (0 - C0)
P.f. = 0.3 ... 0.5
PH_03.book Seite 96 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
97
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Back-up protection limit values of miniature circuit breakers/fuses in kA
Upstream fuses 3NA..., 5SB4..., 5SE2... [kA]
Fuse 3NA 5SB4 5SE2
Operational class gG gG gG
Size 2DIII D02
Rated breaking capacity I
cu
[AC kA] 120 50 50
Rated voltage U
b
[AC V] 500 500 400
Rated current I
n
[A] 50 63 50 63 50 63
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
150 50 50 50 50 50
250 50 50 50 50 50
350 50 50 50 50 50
450 50 50 50 50 50
650 50 50 50 50 50
850 50 50 50 50 50
10 50 50 50 50 50 50
13 50 50 50 50 50 50
16 50 50 50 50 50 50
20 50 50 50 50 50 50
25 50 50 50 50 50 50
32 50 50 50 50 50 50
40 -- 50 -- 50 -- 50
Circuit breaker type:
5SL4...-.
Characteristic C/D
I
cn
[kA] = 10
0.3 50 50 50 50 50 50
0.5 50 50 50 50 50 50
150 50 50 50 50 50
1.6 50 50 50 50 50 50
250 50 50 50 50 50
350 50 50 50 50 50
450 50 50 50 50 50
650 50 50 50 50 50
850 50 50 50 50 50
10 50 50 50 50 50 50
13 50 50 50 50 50 50
16 50 50 50 50 50 50
20 50 50 50 50 50 50
25 50 50 50 50 50 50
32 50 50 50 50 50 50
40 -- 50 -- 50 -- 50
PH_03.book Seite 97 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
98 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Back-up protection limit values of miniature circuit breakers/fuses in kA
Upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Size 2
Rated breaking capacity I
cu
[AC kA] 120
Rated voltage U
b
[AC V] 500
Rated current I
n
[A] 63 80 100 125
Circuit breaker type:
5SL6...-.
Characteristic B
I
cn
[kA] = 6
630 30 10 10
10 30 30 10 10
13 30 30 15 15
16 30 30 15 15
20 30 30 20 15
25 30 30 25 20
32 30 30 25 25
Circuit breaker type:
5SL6...-.
Characteristic C
I
cn
[kA] = 6
0.3 30 30 25 10
0.5 30 30 25 10
130 30 25 10
1.6 30 30 25 10
230 30 25 10
330 30 25 10
430 30 25 10
630 30 20 20
830 30 25 20
10 30 30 25 20
13 30 30 25 20
16 30 30 25 20
20 30 30 25 20
25 30 30 25 20
32 30 30 25 25
PH_03.book Seite 98 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
99
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Back-up protection of miniature circuit breakers/molded case circuit breakers
If miniature circuit breakers are installed in fuseless distribution
boards, molded case circuit breakers according to
IEC/EN 60947-2 must be used as back-up protection.
The following tables show the short-circuit currents – in kA –
up to which back-up protection is guaranteed when using
molded case circuit breakers.
Back-up protection limit values of miniature circuit breakers/molded case circuit breakers in kA
1)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream
miniature circuit breakers
Upstream molded case circuit breakers
3VL1
Non-adjustable
3VL2
Adjustable
I
n
[A] 16 20 25 32 40 50 63 80 100 125 160 50 63 80 100 125 160
I
i
[A] 160 200 250 320 400 500 630 800 1000 1250 1600 400 500 630 800 1000 1280
I
cu
[kA] 40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
40/
70
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
I
n
[A] I
cn
[kA] Back-up protection up to kA
5SY6 (without 5SY60)
Characteristic
B, C
0.3 ... 6 6 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
8 ... 32 6 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
40 ... 63 6 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
5SY4, 5SJ4...-.HG..
1)
Characteristic
A, B, C, D
0.3 ... 6 10 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
8 ... 32 10 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
40 ... 63 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
5SY7
Characteristic
B, C
0.3 ... 2 15 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
3 ... 10 15 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
13 ... 32 15 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
40 ... 63 15 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
Characteristic D 0.3 ... 2 15 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
3 ... 10 15 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
13 ... 32 15 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
40 15 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
50 ... 63 15 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
5SY8
Characteristic C 0.3 ... 2 25 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
3 ... 6 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
8 ... 32 25 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
40 ... 63 25 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Characteristic D 0.3 ... 2 25 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
3 ... 6 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
8 ... 32 25 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
40 25 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
50 ... 63 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
5SP4
Characteristic
B, C
80 ... 125 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
Characteristic D 80 to 100 10 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
PH_03.book Seite 99 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
100 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
1)
The values specified for 5SJ4...-.HG.. are not according to UL but are the
manufacturer's specifications according to EN 60947-2 and apply for
voltage U
e
= 230 V ~. For available rated currents, see Catalog LV 10.
Downstream
miniature circuit breakers
Upstream molded case circuit breakers
3VL3 3VL4 3VL5 3VL6 3VL7 3VL8
I
n
[A] 200 250 200 250 315 400 250 ...
315
315 ...
400
400 ...
500
500 ...
630
320 ...
800
400 ...
1250
1600 ...
2000
I
i
[A] 2000 2500 2000 2500 3150 4000 2500 ...
3150
3150 ...
4000
4000 ...
5000
5000 ...
6300
3200 ...
6300
15000 20 000
I
cn
[kA] 55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
55/70/
100
50/70/
100
70/100
I
n
[A] I
cn
[kA] Back-up protection up to kA
5SY6 (without 5SY60)
Characteristic
B, C
0.3 ... 6 6 35 35 35 35 35 35 35 35 35 35 35 35 35
8 ... 32 6 25 25 25 25 25 25 25 25 25 25 25 25 25
40 ... 63 6 20 20 20 20 20 20 20 20 20 20 20 20 20
5SY4, 5SJ4...-.HG..
1)
Characteristic
A, B, C, D
0.3 ... 6 10 40 40 40 40 40 40 40 40 40 40 40 40 40
8 ... 32 10 30 30 30 30 30 30 30 30 30 30 30 30 30
40 ... 63 10 25 25 25 25 25 25 25 25 25 25 25 25 25
5SY7
Characteristic
B, C
0.3 ... 2 15 50 50 50 50 50 50 50 50 50 50 50 50 50
3 ... 10 15 45 45 45 45 45 45 45 45 45 45 45 45 45
13 ... 32 15 40 40 40 40 40 40 40 40 40 40 40 40 40
40 ... 63 15 35 35 35 35 35 35 35 35 35 35 35 35 35
Characteristic D 0.3 ... 2 15 50 50 50 50 50 50 50 50 50 50 50 50 50
3 ... 10 15 45 45 45 45 45 45 45 45 45 45 45 45 45
13 ... 32 15 40 40 40 40 40 40 40 40 40 40 40 40 40
40 15 35 35 35 35 35 35 35 35 35 35 35 35 35
50 ... 63 15 30 30 30 30 30 30 30 30 30 30 30 30 30
5SY8
Characteristic C 0.3 ... 2 25 70 70 70 70 70 70 70 70 70 70 70 -- --
3 ... 6 25 50 50 50 50 50 50 50 50 50 50 50 -- --
8 ... 32 25 45 45 45 45 45 45 45 45 45 45 45 -- --
40 ... 63 25 40 40 40 40 40 40 40 40 40 40 40 -- --
Characteristic D 0.3 ... 2 25 70 70 70 70 70 70 70 70 70 70 70 -- --
3 ... 6 25 50 50 50 50 50 50 50 50 50 50 50 -- --
8 ... 32 25 45 45 45 45 45 45 45 45 45 45 45 -- --
40 25 40 40 40 40 40 40 40 40 40 40 40 -- --
50 ... 63 25 35 35 35 35 35 35 35 35 35 35 35 -- --
5SP4
Characteristic
B, C
80 ... 125 10 25 25 25 25 25 25 25 25 25 25 25 -- --
Characteristic D 80 to 100 10 20 20 20 20 20 20 20 20 20 20 20 -- --
PH_03.book Seite 100 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
101
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Back-up protection limit values of miniature circuit breakers/molded case circuit breakers in kA
Upstream molded case circuit breaker 3VA2... [kA]
Molded case circuit breakers 3VA2
Size 100 A 160 A 250 A
Releases ETU320, ETU330, ETU340, ETU350, ETU550, ETU560
Rated current I
n
[A] 25 40 63 100 25 40 63 100 160 160 250
Circuit breaker type:
5SL4...-.
Characteristic B
I
cn
[kA] = 10
125 25 25 25 25 25 25 25 25 25 25
225 25 25 25 25 25 25 25 25 25 25
325 25 25 25 25 25 25 25 25 25 25
425 25 25 25 25 25 25 25 25 25 25
625 25 25 25 25 25 25 25 25 25 25
820 20 20 20 20 20 20 20 20 20 20
10 20 20 20 20 20 20 20 20 20 20 20
13 15 15 15 15 15 15 15 15 15 15 15
16 15 15 15 15 15 15 15 15 15 15 15
20 -- 25 25 25 -- 25 25 25 25 25 25
25 -- 25 25 25 -- 25 25 25 25 25 25
32 -- -- 25 25 -- -- 25 25 25 25 25
40 -- -- 10 10 -- -- 10 10 10 10 10
Circuit breaker type:
5SL4...-.
Characteristic C/D
I
cn
[kA] = 10
0.3 25 25 25 25 25 25 25 25 25 25 25
0.5 25 25 25 25 25 25 25 25 25 25 25
125 25 25 25 25 25 25 25 25 25 25
1.6 25 25 25 25 25 25 25 25 25 25 25
225 25 25 25 25 25 25 25 25 25 25
325 25 25 25 25 25 25 25 25 25 25
425 25 25 25 25 25 25 25 25 25 25
625 25 25 25 25 25 25 25 25 25 25
820 20 20 20 20 20 20 20 20 20 20
10 10 10 10 10 10 10 10 10 10 10 10
13 15 15 15 15 15 15 15 15 15 15 15
16 25 25 25 25 25 25 25 25 25 25 25
20 -- 25 25 25 -- 25 25 25 25 25 25
25 -- 25 25 25 -- 25 25 25 25 25 25
32 -- -- 25 25 -- -- 25 25 25 25 25
40 -- -- 10 10 -- -- 10 10 10 10 10
PH_03.book Seite 101 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
102 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Internal resistance and power loss
Internal resistance R
i
and power loss P
v
of 5SL3, 5SL6 miniature circuit breakers
(data per pole with I
n
)
Internal resistance R
i
and power loss P
v
of 5SL4 miniature circuit breakers
(data per pole with I
n
)
Characteristic B Characteristic C
I
n
R
i
P
v
R
i
P
v
A mΩW mΩW
5SL3, 5SL6
0.3 -- -- 10500 0.9
0.5 -- -- 3400 0.9
1-- -- 1210 1.2
1.6 -- -- 459 1.2
2-- -- 295 1.2
3-- -- 137 1.2
4-- -- 81 1.3
623.3 0.8 17.1 0.6
8-- -- 10.9 0.7
10 14.9 1.5 12.1 1.2
13 11.0 1.9 10.6 1.8
16 7.6 1.9 6.6 1.7
20 5.2 2.1 5.1 2.0
25 4.0 2.5 3.7 2.3
32 2.3 2.4 2.4 2.5
40 2.1 3.4 2.1 3.3
50 1.5 3.8 1.4 3.5
63 1.4 5.4 1.1 4.4
Characteristic B Characteristic C Characteristic D
I
n
R
i
P
v
R
i
P
v
R
i
P
v
A mΩW mΩW mΩW
5SL4
0.3 -- -- 10151 0.9 10151 0.9
0.5 -- -- 3551 0.9 3551 0.9
11954 2.0 1172 1.2 1089 1.1
1.6 -- -- 510 1.3 466 1.2
2461 1.8 297 1.2 273 1.1
3216 1.9 127 1.1 124 1.1
498 1.6 76 1.2 68 1.1
652 1.9 43 1.6 39 1.4
822 1.4 11.9 0.8 11.8 0.8
10 19.3 1.9 9.1 0.9 8.6 0.9
13 12.3 2.1 9.1 1.5 8.2 1.4
16 7.1 1.8 6.0 1.5 4.8 1.2
20 6.1 2.5 5.0 2.0 4.1 1.6
25 4.8 3.0 3.7 2.3 3.7 2.3
32 2.6 2.7 2.6 2.6 2.6 2.7
40 2.2 3.4 2.1 3.3 2.1 3.3
50 1.6 4.0 1.4 3.6 1.4 3.6
63 1.3 5.0 1.3 5.0 1.3 5.0
PH_03.book Seite 102 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
103
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Internal resistance R
i
and power loss P
v
of 5SY4, 5SY6, 5SY7, 5SY8, 5SY5 and 5SP4 miniature circuit breakers
(data per pole with I
n
)
Internal resistance R
i
and power loss P
v
of 5SY30, 5SY60 miniature circuit breakers, compact range 1+N in 1 MW
(data per pole with I
n
)
Characteristic A Characteristic B Characteristic C Characteristic D
I
n
R
i
P
v
R
i
P
v
R
i
P
v
R
i
P
v
A mΩW mΩW mΩW mΩW
5SY4, 5SY6 (without 5SY60),
5SY7, 5SY8, 5SY5 0.3 -- -- -- -- 10270 0.9 10070 1
0.5 7600 1.9 3300 0.8 3100 0.8
1 2080 2.1 -- -- 1200 1.2 1075 1.1
1.6 831 2.1 -- -- 450 1.2 408 1.0
2 546 2.2 381 1.5 298 1.2 295 1.2
2.5 -- -- -- -- 230 1.4 -- --
3 213 1.9 -- -- 138 1.3 132 1.2
3.5 -- -- -- -- 135 1.7 -- --
4 144 2.3 93 1.5 81 1.3 74 1.2
5 -- -- -- -- 87 2.2 -- --
6 60 2.2 58 2.1 45 1.6 44 1.6
8 29.3 1.9 -- -- 14 0.9 12 0.8
10 19.5 2.0 13 1.3 11 1.0 8.5 0.9
13 11.7 2.0 9.9 1.7 8.3 1.4 8.3 1.4
15 -- -- -- -- 6.5 1.5 -- --
16 9.6 2.5 6.9 1.8 6.3 1.6 6.2 1.6
20 6.2 2.5 5.5 2.2 4.3 1.7 4.0 1.6
25 5.2 3.3 3.8 2.4 3.5 2.2 3.3 2.1
30 -- -- -- -- 2.6 2.3 -- --
32 3.3 3.4 2.5 2.6 2.6 2.6 2.1 2.1
35 -- -- -- -- 2.1 2.6 -- --
40 2.4 3.9 2.2 3.6 2.2 3.5 1.9 3.0
45 -- -- -- -- 1.5 3.1 -- --
50 1.8 4.5 1.7 4.3 1.5 3.8 1.5 3.7
60 -- -- -- -- 1.2 4.4 -- --
63 1.5 6.0 1.5 6.0 1.2 4.9 1.3 5.0
80 -- -- 1.05 6.7 1.05 6.7 -- --
5SP4
80 -- -- 1.1 7.0 1.1 6.7 1.1 6.7
100 -- -- 0.8 8.0 0.88 80.8 8
125 -- -- 0.7 10.1 0.7 10.8 -- --
Correction factors for power loss
• Direct current and alternating current up to 60 Hz × 1.0
• Alternating current 200 Hz × 1.1
400 Hz × 1.15
1000 Hz × 1.3
Characteristic B Characteristic C
Phase-pole N pole Phase-pole N pole
I
n
R
i
P
v
R
i
P
v
R
i
P
v
R
i
P
v
A mΩW mΩW mΩW mΩW
5SY30, 5SY60
2-- -- -- -- 291 1.2 3.7 0.01
4-- -- -- -- 126 2.0 4.1 0.07
632 1.1 4.2 0.2 26 0.9 4.3 0.2
8-- -- -- -- 20 1.3 4.0 0.3
10 16 1.6 4.2 0.4 13 1.3 4.3 0.4
13 9.9 1.7 4.2 0.7 9.5 1.6 4.5 0.8
16 9.1 2.3 4.2 1.1 8.1 2.1 3.4 0.9
20 5.6 2.2 1.1 0.4 5.7 2.3 1.2 0.5
25 3.5 2.2 1.1 0.7 3.3 2.1 1.1 0.7
32 2.7 2.8 1.1 1.2 2.8 2.8 1.2 1.2
40 2.5 4.0 1.1 1.8 2.4 3.8 1.1 1.8
PH_03.book Seite 103 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
104 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Personnel safety with miniature circuit breakers
According to DIN VDE 0100-410, in order to protect against
dangerous leakage currents in the TN system, the cross-
sections of the conductor, or its distance from the protective
device, must be dimensioned such that if a fault with negligible
impedance (i.e. short circuit) occurs at any point between a
phase conductor and a PE conductor, or a connected exposed
conductive part, the device automatically trips within the
specified times of 0.4 s/5 s.
This requirement is met through the following condition:
Z
s
× I
a
≤ U
o
Maximum permissible impedance of fault loop at U
o
= 230 V AC for compliance with trip conditions according to DINVDE0100-410
Z
s
rImpedance of the fault loop of all electrical circuits
I
a
rCurrent that trips within the specified times
U
o
rVoltage to ground
Characteristic A Characteristic B Characteristic C Characteristic D
I
n
t
a
≤ 0.4 s ≤ 5 s t
a
≤ 0.4 s ≤ 5 s t
a
≤ 0.4 s ≤ 5 s t
a
≤ 0.4 s ≤ 5 s
AΩ Ω Ω Ω Ω Ω Ω Ω
5SL, 5SY, 5SP
0.3 -- -- -- -- 76.6 153 -- --
0.5 -- -- -- -- 46 92 -- 92
1.0 76.6 76.6 -- -- 23 46 15.3 46
1.6 47.9 47.9 -- -- 14.4 28.8 9.6 28.8
238.3 38.3 -- -- 11.5 23 7.6 23
325.5 25.5 -- -- 7.7 15.4 5.1 15.4
419.1 19.1 -- -- 5.8 11.6 3.8 11.6
612.7 12.7 7.6 7.6 3.8 7.6 2.5 7.6
8-- -- -- -- 2.8 5.7 1.9 5.7
10 7.6 7.6 4.6 4.6 2.3 4.6 1.1 4.6
13 -- -- -- 3.57 1.7 3.4 0.9 3.4
16 4.7 4.7 2.9 2.9 1.4 2.8 0.7 2.8
20 3.8 3.8 2.3 2.3 1.1 2.2 0.5 2.2
25 3.0 3.0 1.8 1.8 0.9 1.8 0.4 1.8
32 2.4 2.4 1.4 1.4 0.7 1.4 0.3 1.4
40 1.9 1.9 1.1 1.1 0.6 1.2 0.28 1.2
50 -- -- 0.9 0.9 0.5 1.0 0.23 1.0
63 -- -- 0.7 0.7 0.4 0.8 0.2 0.8
80 -- -- -- -- 0.3 0.6 0.14 0.6
100 -- -- -- -- 0.2 0.4 0.1 0.4
125 -- -- -- -- 0.16 0.3 0.1 0.3
At U
o
= 240 V AC,
Z
s
× 1.04 applies.
At U
o
= 127 V AC,
Z
s
× 0.55 applies.
PH_03.book Seite 104 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
105
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Fuse protection of luminaire circuits
Maximum permissible lamp load of a miniature circuit breaker
when operating fluorescent lamps L 18 W, L 36 W, L 38 W,
L 58 W.
Maximum number of fluorescent lamps
1)
All ECGs are turned on simultaneously.
2)
The ECGs are turned on in groups one after the other.
Circuit impedance:
The specified lamp loads apply, taking into account a line impedance of
800 mΩ.
At 400 mΩ, the permissible values are reduced by 10 %.
Reduction factors for miniature circuit breakers for the simultaneous switching on of incandescent lamp loads,
referred to the rated current of the miniature circuit breaker and the total operational current of the lamps
I
n
[A] Lamp Electronic ballast
Full switching at 230 V Group switching at 230 V
1 lamp
1)
2 lamps 1 lamp
2)
2 lamps
5SY4, 5SY6 (without 5SY60), 5SY7, 5SY8, 5SY5
Characteristic BCDBCDBCDBCD
6 L 18 W 17 37 66 17 35 35 66 66 66 35 35 35
L 36 W 17 37 37 17 19 19 37 37 37 19 19 19
L 58 W 17 19 19 12 12 12 19 19 19 12 12 12
8 L 18 W -- 50 88 -- 47 47 -- 88 88 -- -- 47
L 36 W -- 50 50 -- 25 25 -- 50 50 -- 25 25
L 58 W -- 25 25 -- 16 16 -- 25 25 -- 16 16
10 L 18 W 36 67 111 36 58 58 111 111 111 58 58 58
L 36 W 36 62 62 32 32 32 62 62 62 32 32 32
L 58 W 32 32 32 20 20 20 32 32 32 20 20 20
13 L 18 W 44 81 144 44 76 76 144 144 144 76 76 76
L 36 W 44 81 81 41 41 41 81 81 81 41 41 41
L 58 W 41 41 41 26 26 26 41 41 41 26 26 26
16 L 18 W 56 100 177 56 94 94 177 177 177 94 94 94
L 36 W 56 100 100 51 51 51 100 100 100 51 51 51
L 58 W 51 51 51 32 32 32 51 51 51 32 32 32
20 L 18 W 70 117 222 70 117 117 222 222 222 117 117 117
L 36 W 70 117 125 64 64 64 125 125 125 64 64 64
L 58 W 64 64 64 40 40 40 64 64 64 40 40 40
25 L 18 W 85 157 277 85 147 147 277 277 277 147 147 147
L 36 W 85 156 156 80 80 80 156 156 156 80 80 80
L 58 W 80 80 80 51 51 51 80 80 80 51 51 51
32 L 18 W 100 144 355 100 144 188 355 355 355 188 188 188
L 36 W 100 144 200 100 103 103 200 200 200 103 103 103
L 58 W 100 103 103 65 65 65 103 103 103 65 65 65
40 L 18 W 126 216 444 126 216 235 444 444 444 235 235 235
L 36 W 126 216 250 126 129 129 250 250 250 129 129 129
L 58 W 126 129 129 81 81 81 129 129 129 81 81 81
50 L 18 W 180 247 555 180 247 294 555 555 555 294 294 294
L 36 W 180 247 312 161 161 161 312 312 312 161 161 161
L 58 W 161 161 161 102 102 102 161 161 161 102 102 102
63 L 18 W 170 340 567 170 340 370 700 700 700 370 370 370
L 36 W 170 340 393 170 203 203 393 393 393 203 203 203
L 58 W 170 203 203 128 128 128 203 203 203 128 128 128
Reduction factor
Switching with miniature circuit
breaker
Switching with separate switch
5SL, 5SY, 5SP4
Characteristic A 0.3 0.35
Characteristic B 0.5 0.6
Characteristic C 1 1
Characteristic D 1 1
PH_03.book Seite 105 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
106 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Current carrying capacity of miniature circuit breakers with corrected and uncorrected HQ, HQI and NAV lamps (number)
Different data apply for corrected/uncorrected lamps.
Lamp power [W]
35 70 150 250 400 1000 2000 3500
lamp current [A] 0.5 11.8 33.5 9.5 10.3 18
Corrected lamp current [A] 0.3 0.5 11.5 2 6 5.5 9.8
Inrush peak [A] 10 18 36 60 70 120 125 220
I
n
[A] Lamp power [W]
35 70 150 250 400 1000 2000 3500
5SY4...-6, 5SY6...-6 (without 5SY60), 5SY7...-6
Characteristic B 6 2 1 0 0 0 0 0 0
10 5 3 1 1 0 0 0 0
13 7 4 2 1 1 0 0 0
16 8 5 2 1 1 0 0 0
20 11 6 3 1 1 1 1 0
25 13 7 3 2 2 1 1 0
32 16 8 4 2 2 1 1 0
40 20 11 5 3 3 1 1 1
50 28 15 7 4 4 2 2 1
63 26 14 7 4 3 2 2 1
5SY4...-7, 5SY6...-7 (without 5SY60), 5SY7...-7
Characteristic C 6 6 3 1 1 0 0 0 0
88 4 2 1 1 0 0 0
10 10 6 3 1 1 0 0 0
13 13 7 3 2 1 1 1 0
16 16 9 4 2 2 1 1 0
20 18 10 5 3 2 1 1 0
25 25 14 7 4 3 2 1 1
32 22 12 6 3 3 2 1 1
40 33 18 9 5 4 2 2 1
50 38 21 10 6 5 3 3 1
63 53 29 14 9 7 4 4 2
5SY4...-8, 5SY7...-8
Characteristic D 6 8 4 2 1 1 0 0 0
8 11 5 3 2 1 0 0 0
10 14 7 4 2 2 0 0 0
13 18 9 5 3 2 1 1 0
16 22 11 6 3 3 1 1 0
20 28 14 7 4 4 1 1 0
25 35 17 9 5 5 2 1 1
32 44 22 12 7 6 2 2 1
40 56 28 15 9 8 3 2 1
50 70 35 19 11 10 4 3 2
63 88 44 24 14 12 4 4 2
5SP4...-7
Characteristic C 80 76 42 21 12 11 66/5 3
100 98 54 27 16 14 8/7 8/6 4
125 116 64 32 19 16 99/8 5
5SP4...-8
Characteristic D 80 143/112 80/56 40/31 24/18 20/16 9/6 10/5 5/3
100 186/140 103/70 51/39 31/23 26/20 11/7 12/6 7/4
PH_03.book Seite 106 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
107
Siemens · 10/2015
Miniature Circuit Breakers
Configuration and dimensioning
Direct current, universal current
The 5SL, 5SY, 5SP4 and 5SJ4...HG.. miniature circuit breakers
can also be used in DC systems. The max. voltage per pole must
not exceed 72 V DC.
A multiple of this can be achieved through series connection of
two or more poles depending on the circuit, e.g. max. 144 V DC
through series connection of two poles. However, care must be
taken not to exceed the max. voltage of 72 V DC per pole
depending on the overall circuit.
For higher DC voltages, we recommend UC (UC = Universal
Current) miniature circuit breakers from the 5SY5 series, which
can be used for both AC and DC applications.
The maximum voltage for 5SY5 UC devices is 250VDC per pole.
The series connection of individual poles enables 4-pole
devices (for example) to be used for up to a maximum of
1000 V DC.
The arcing chamber area of the 5SY5 miniature circuit breakers
is equipped with additional permanent magnets to support the
positive quenching of the electric arc. This is why the polarity of
the breaker is marked. it is essential to pay attention to the
conduction direction when connecting the conductor. Suitable
precautions should be taken during plant configuration to
ensure there can be no polarity reversal in DC operation
(e.g. photovoltaic plants).
I201_18348
+
+–
–
2
1
72 V –
I201_18349
+
+–
–
2
1
4
3
144 V –
I201_18350
+–
+
–
2
1
4
3
144 V –
PH_03.book Seite 107 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
108 Siemens · 10/2015
Configuration and dimensioning
Miniature Circuit Breakers
Load (e.g. inverter) Power supply (e.g. solar module, battery)
Line
system
Single-ended grounding Neutral point symmetrically grounded Insulated / Not grounded
Circuit
diagram
Fault types
aIn the event of a fault between the positive and
negative pole, the maximum short-circuit current
from both poles will be fed with full voltage and
be protected by the pole of the miniature circuit
breaker which is switched in the positive pole.
In the event of a fault between the positive and
negative pole, the maximum short-circuit current
from both poles will be fed with full voltage.
In the event of a fault between the positive and
negative pole, the maximum short-circuit current
from both poles will be fed with full voltage and
be protected by the pole of the miniature circuit
breaker which is switched in the positive and
negative pole.
bIn the event of a fault between a non-grounded
pole and ground, the maximum short-circuit
current will be fed with full voltage and be
protected by the pole of the miniature circuit
breaker which is switched in the positive pole.
In the event of a fault between the positive pole
and ground, the maximum short-circuit current
will be fed with a voltage of 0.5 x U and be
protected only by the poles of the miniature
circuit breaker which is switched in the positive
pole.
A fault between a pole and ground has no
consequences.
cA fault between a pole and ground has no
consequences.
See fault b, but concerns only the negative pole. A fault between a pole and ground has no
consequences.
Circuit The poles of the miniature circuit breaker which
are required for protection must be connected in
series to the non-grounded pole. If the positive
pole is grounded, the negative pole must be
protected. If an isolating function is required, the
grounded pole must also be protected.
The miniature circuit breaker must be equipped
at the positive and negative pole for
disconnecting the short-circuit current at
0.5 x U.
The positive and negative pole must be
protected by the corresponding number of
poles of the miniature circuit breaker.
U
max
1-pole disconnection 2-pole/all-pole disconnection 2-pole/all-pole disconnection
≤ 250 V
-pole grounded
Infeed at bottom
+pole grounded
Infeed at top
Infeed at bottom Infeed at top Infeed at bottom Infeed at top
≤ 500 V
-pole grounded
Infeed at bottom
+pole grounded
Infeed at top
Infeed at bottom Infeed at top Infeed at bottom Infeed at top
≤ 1000 V
Infeed at bottom Infeed at bottom Infeed at bottom
(-)
+
+
I201_18352
+–
2
a
bc
Umax
1
+–
(-) (+)
+
+–
I201_18353
+–
24
a
bc
Umax
13
+–
(-) (+)
+
+–
I201_18354
+–
24
a
bc
Umax
13
+–
1(-)
2+
-
+
+
I201_06357e
1(-)
2+
-+
+
+
-
+–
–
4+
2
(+)
3
(-)
1
+
-
+4
2
(+)
3
(-)
1
I201_06361
+
–
–
+
-
+-
4+
2
(+)
3
(-)
1
+
+
-
-
+4
2
(+)
3
(-)
1
I201_06360
1(-) 3(+)
24
-
+
+
-
+
I201_06359e
1(-) 3(+)
24
-+
+
+-
+
+
-
+–
–
4+
2
(+)
3
(-)
1
+
-
+4
2
(+)
3
(-)
1
I201_06361
+
–
–
+
-
+-
4+
2
(+)
3
(-)
1
+
+
-
-
+4
2
(+)
3
(-)
1
I201_06360
I202_02101
13
+
24
-
-
–
+
+
57
+
68
-
-
+
L
SV
+
–
L
SV
–
+
I202_02112
13
+
24
-
-
+
+
57
+
68
-
-
+
–L
SV
–
+
I202_02112
13
+
24
-
-
+
+
57
+
68
-
-
+
–
+
–
PH_03.book Seite 108 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
109
Siemens · 10/2015
Miniature Circuit Breakers
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
■
Overview
UL standards are used in North America as well as in several
other countries. This is of particular importance to European
exporters of electrical switchgear assemblies and equipment for
machines who export to the USA, as their products will only be
accepted if they meet the relevant UL standards.
A wide range of low-voltage circuit protection devices from
Siemens comply with UL standards and are therefore suitable for
implementation worldwide in both IEC/EN and UL applications
within the framework of their specified use.
Miniature circuit breakers certified to UL 489 permit use as an
all-round solution for protection tasks in distribution boards,
control cabinets and control systems to UL 508A as "branch
protectors". In particular, they are also approved for the
protection of electrical circuits in heating, ventilating and cooling
systems (HVAC), as well as for DC applications up to 60 V/125 V.
This covers a wide range of protection tasks, in residential and
non-residential buildings, as well as in industry. The tripping
characteristics B, C and D to EN/IEC 60898-1 have been
adapted so that they fall in the permissible tripping range
according to UL 489, as well as for applications at 25 °C and
40 °C.
This means that the devices are approved for use according to
both standards. The enclosure dimensions of the devices
correspond to DIN format. This means that the device series are
suitable for universal use worldwide according to IEC or
UL standards.
The key difference between the three device series is their
application in different power supply systems.
• 5SJ4…-.HG40: 240/120 V AC, 1-pole, "same polarity only"
• 5SJ4…-.HG41: 240 V AC, 1-, 2- and 3-pole
• 5SJ4…-.HG42: 480Y/277 V AC, 1-, 2- and 3-pole
The terminals are suitable for "field wiring". This means that the
devices can be installed not only in factory-built distribution
boards and control cabinets, but also on-site in a customer
system.
Using this mounting concept, all 5ST3. . .-. HG additional
componentscan be combined with miniature circuit breakers of
the 5SJ4…-.HG range. The auxiliary switch (AS) signals the
contact position. In the event of a fault, the fault signal contact
(FC) signals the automatic tripping of the MCB as well as the
contact position. Shunt trips (ST) are used for the remote tripping
of miniature circuit breakers. Captive metal brackets on the
additional components ensure fast mounting on the devices.
Single, two and three-phase busbars in 3 lengths with 6, 12 or
18 pins are available as accessories for all device series for "field
wiring". The infeed is via connection terminals, which are
available in two versions, for direct infeed at either the busbar or
the miniature circuit breakers. Pins that are not required can be
covered with touch protection covers.
PH_03.book Seite 109 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
110 Siemens · 10/2015
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Miniature Circuit Breakers
■
Technical specifications
1)
For detailed information on rated switching capacity, see page 117.
5SJ4. . .-.HG40 5SJ4. . .-.HG41 5SJ4. . .-.HG42
Standards EN 60947-2;
UL 489 (UL File E243414); UL 489A (UL File E332105); CSA C22.2 No. 5-02
Approvals www.siemens.com/lowvoltage/certificates
Tripping characteristic B, C, D C, D
Rated voltage
• Acc. to EN 60947-2 V AC 230/400 230/400 230/400
• Acc. to UL 489 and CSA C22.2 No.5-02 V AC 240/120 240 480/277
DC V/1P 60 60 60
DC V/2P -- 125 125
Operational voltage Min. V AC/DC
per pole
24
• Acc. to IEC 60898-1 Max. V DC/pole 60
Max. V AC 250/440
• Acc. to UL 489 Max. V DC/pole 72
Rated breaking capacity
•I
cn
acc. to IEC 60898-1 kA AC 10
•I
cu
acc. to IEC 60947-2 kA AC 15
• Acc. to UL 489/UL 489A and CSA C22.2 No. 5-02 kA AC 14/10
1)
14/10
1)
10
1)
Insulation coordination
• Rated insulation voltage V AC 250 250/440
• Pollution degree for overvoltage category 3/III
Rated frequency Hz 50/60
Touch protection acc. to EN 50274 Yes
Handle end position, sealable Ye s
Degree of protection acc. to EN 60529 IP40 in the area of the handle
CFC and silicone-free Yes
Mounting On standard mounting rail
Terminals ± screw (Pozidriv) 2
• Combined terminals at both ends Yes
• Terminal tightening torque for Cu, 60/75 °C Nm 3.5
lb/in 31
Conductor cross-sections
• Solid and stranded, acc. to UL489 and CSA C22.2 No.5-02 AWG 14 ... 4
• Solid and stranded, according to IEC 60898-1 mm
2
1.5 ... 25
• Finely stranded, with end sleeve mm
2
1.5 ... 25
Mains connection Any
Mounting position Any
Service life, on average, with rated load 20000 actuations
EMC environment
• Acc. to EN 60947-2 Suitable for environment "B" (immunity to interference not applicable)
Ambient temperature °C -25 ... +55, max. 95 % humidity
Storage temperature °C -40 ... +75
Resistance to climate acc. to IEC 60068-2-30 6 cycles
Resistance to vibrations acc. to IEC 60068-2-6 m/s
2
50 at 25 ... 150 Hz and 60 at 35 Hz (4 sec)
PH_03.book Seite 110 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
111
Siemens · 10/2015
Miniature Circuit Breakers
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
1)
Note:
The busbars and terminals are suitable for applications up to
80 A if installed in distribution boards with min. dimensions of
18 x 18 x 6.25 inches, or up to 115 A if installed in distribution
boards with min. dimensions of 30 x 30 x 10 inches.
Additional components Auxiliary switches (AS) Fault signal contacts
(FC)
Shunt trips (ST)
5ST3010-0HG
5ST3011-0HG
5ST3012-0HG
5ST3020-0HG
5ST3021-0HG
5ST3022-0HG
5ST3030-0HG 5ST3031-0HG
Standards UL 489, UL-File E321559; CSA 22.2 No. 5-02
IEC/EN 62019, IEC/EN 60947-5-1 IEC/EN 60947-1
Operational voltage/operational current (load)
• Acc. to IEC V AC 400 230 110 ... 415 24 ... 60
A AC 26 (NC: 13 AC, NO: AC14) -- --
V DC 220 110 60 24 -- 24 ... 60
A DC 1136 (DC13) -- --
• Acc. to UL V AC 480 277 240 120 110 ... 480 24 ... 60
A AC 1.5 346 -- --
V DC 125 60 -- 24 ... 60
A DC 1 3 -- --
Rated frequency Hz 50/60
Short-circuit protection Miniature circuit breaker or 6 A fuse
Minimum contact load 50 mA, 24 V
Tripping operations -- -- Max. 2000
Service life, on average, with rated load 12000 actuations
Primary operating range x U
n
-- 0.7 ... 1.1
Conductor cross-sections AWG 22 ... 14 22 ... 14
mm
2
0.5 ... 2.5 0.5 ... 2.5
Terminals ± screw (Pozidriv) 1 1 1
• Terminal tightening torque Nm 0.5 0.8
lb/in 4.5 6.8
Version Busbars Busbars
can be cut
Terminals
Type 5ST3663-.HG
1)
5ST3664-.HG
1)
5ST3665-.HG
1)
5ST3701-3HG
5ST3703-3HG
5ST3705-3HG
5ST3707-3HG
5ST3710-3HG
5ST3712-3HG
5ST3714-3HG
5ST3666-0HG
1)
5ST3666-2HG
1)
5ST3770-3HG
Standards UL 489;
UL File No. E321559
UL 489;
UL File No.
E315616
UL 489;
UL File No. E321559
UL 489;
UL File No. E315616
Operational voltage
• Acc. to IEC V AC 1000/1-pole 600/2- to 3-pole
• Acc. to UL 489 V AC 1000/1-pole 600/2- to 3-pole (60 Hz)
Rated conditional short-circuit
current
kA 10 kA at 600 V 10 kA at 600 V with
J 175 A fuse
10 kA at 600 V 10 kA at 600 V with J
175 A fuse
• Dielectric strength kV/mm 35
• Surge strength kV > 9.5 > 10 > 9.5 > 10
Rated current A115
At 40 °C ambient
temperature
80 (infeed end)
160 (infeed middle)
At 35 °C ambient
temperature
115 (Cu 75 °C)
95 (Cu 60 °C)
At 40 °C ambient
temperature
115 (Cu 75 °C)
110 (Cu 60 °C)
At 40 °C ambient
temperature
115 (Cu 75 °C)
95 (Cu 60 °C)
At 35 °C ambient
temperature
Insulation coordination
• Pollution degree 2
• Overvoltage category III
Busbar cross-section (Cu) mm
2
16 18 16 18
Infeed Any
Conductor cross-sections
•AWG cables AWG -- 14 ... 2 14 ... 1 14 ... 2
• Solid and stranded mm
2
-- 2.5 ... 35 2.5 ... 50 2.5 ... 35
Terminals -- Hexagon socket 6 mm ± screw (Pozidriv) 2 Hexagon socket
6mm
• Terminal tightening torque Nm -- 5.5 45.5
lb/in -- 50 35 50
Temperature resistance °C 125 – UL 94-V0/0.4 mm
Interrupting rating 10 kA at 600 V AC/DC
PH_03.book Seite 111 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
112 Siemens · 10/2015
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Miniature Circuit Breakers
■
Characteristic curves
Tripping characteristics acc. to IEC/EN 60898-1 and UL 489/CSA 22.2 No. 5-02
Tripping characteristic B
MCBs with this tripping characteristic are designed for universal
use in socket outlet and lighting circuits. Proof of personal safety
acc. to DIN VDE 0100-410 is not required.
Tripping characteristic C
Primarily used in lamp and motor circuits with higher starting
currents.
Tripping characteristic D
For electrical circuits with strong pulse-generating equipment,
such as transformers or solenoid valves.
Correction factors for rated current at different ambient
temperatures
Dependence of the permissible continuous load on ambient
temperature.
1
2
2
2
1
1
1
1
Multiple of rated current
Seconds
Tripping time
Minutes
acc. to UL 489
acc. to IEC/EN 60898-1
1 Min.
T = 25 °C/40 °C
T = 25 °C
4
10
20
6
120
6
0,01
0,02
0,04
0,1
0,2
0,4
0,06
0,6
1234568102030406080100
1
2
4
10
20
40
2
60
I201_18117
1
2
2
2
1
1
1
1
Multiple of rated current
Seconds
Tripping time
Minutes
acc. to UL 489
acc. to IEC/EN 60898-1
1 Min.
1234568102030406080100
1
2
4
10
20
40
2
4
10
20
6
120
6
0,01
0,02
0,04
0,1
0,2
0,4
0,06
0,6
60
I201_18118
T = 25 °C/40 °C
T = 25 °C
1
2
2
2
1
1
1
1
Multiple of rated current
Seconds
Tripping time
Minutes
acc. to UL 489
acc. to IEC/EN 60898-1
1 Min.
1234568102030406080100
1
2
4
10
20
40
2
4
10
20
6
120
6
0,01
0,02
0,04
0,1
0,2
0,4
0,06
0,6
60
I201_18119
T = 25 °C/40 °C
T = 25 °C
Curve 4
Curve 3
Curve 2
Curve 1
Correction factor
Ambient temperature [°C]
-20 -10 0
0,8
0,9
1,0
1,1
1,2
1,3
1,4
2010 4030 50 60
I201_18120
PH_03.book Seite 112 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
113
Siemens · 10/2015
Miniature Circuit Breakers
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Correction factor for 5SJ4...-. HG miniature circuit breakers
(for curves, see diagram on previous page)
Current carrying capacity at ambient temperatures other than 40 °C
In the event of ambient temperatures other than 40 °C, refer to the following table for the current carrying capacity of the
5SJ4...-.HG miniature circuit breakers.
Rated current (A) 0.3 0.5 11.6 2 3 4 5 6 8 10 13 15 16 20 25 30 32 35 40 45 50 60 63
Number of poles Valid curve for correction factor for 5SJ4...-.HG miniature circuitbreakers
14 4 4 4 3 3 2 2 2 2 3 3 3 3 3 3 3 3 3 3 2 2 3 2
24 4 3 3 3 3 2 2 2 2 3 3 3 2 2 2 2 2 2 2 1 2 2 1
34 4 3 3 3 3 2 2 2 2 3 3 3 2 2 2 2 2 2 2 1 1 1 1
Rated current I
n
(A) at 40 °C Permissible rated current I
n
(A), depending on the ambient temperature
Rated current I
n
(A) Number of
poles
15 °C 20 °C 25 °C 30 °C 40 °C 50 °C 55 °C
0.3 1/2/3 0.35 0.34 0.33 0.32 0.30 0.28 0.26
0.5 1/2/3 0.59 0.57 0.55 0.54 0.50 0.46 0.44
111.2 1.1 1.1 1.1 1.0 0.9 0.9
2/3 1.1 1.1 1.1 1.1 1.0 0.9 0.9
1.6 11.9 1.8 1.8 1.7 1.6 1.5 1.4
2/3 1.8 1.8 1.7 1.7 1.6 1.5 1.5
21/2/3 2.3 2.2 2.2 2.1 2.0 1.9 1.8
31/2/3 3.4 3.3 3.3 3.2 3.0 2.8 2.7
41/2/3 4.5 4.4 4.3 4.2 4.0 3.8 3.7
51/2/3 5.6 5.5 5.3 5.2 5.0 4.8 4.6
61/2/3 6.7 6.5 6.4 6.3 6.0 5.7 5.6
81/2/3 8.9 8.7 8.6 8.4 8.0 7.6 7.4
10 1/2/3 11.4 11.1 10.8 10.6 10.0 9.4 9.1
13 1/2/3 14.8 14.4 14.1 13.7 13.0 12.2 11.8
15 1/2/3 17.1 16.7 16.3 15.9 15.0 14.1 13.6
16 118.2 17.8 17.4 16.9 16.0 15.0 14.5
2/3 17.8 17.5 17.1 16.7 16.0 15.2 14.8
20 122.8 22.2 21.7 21.1 20.0 18.8 18.1
2/3 22.3 21.8 21.4 20.9 20.0 19.0 18.5
25 128.4 27.8 27.1 26.4 25.0 23.5 22.7
2/3 27.8 27.3 26.7 26.2 25.0 23.8 23.1
30 134.1 33.3 32.5 31.7 30.0 28.2 27.2
2/3 33.4 32.7 32.1 31.4 30.0 28.5 27.8
32 136.4 35.6 34.7 33.8 32.0 30.1 29.0
2/3 35.6 34.9 34.2 33.5 32.0 30.4 29.6
35 139.8 38.9 38.0 37.0 35.0 32.9 31.8
2/3 38.9 38.2 37.4 36.6 35.0 33.3 32.4
40 145.5 44.5 43.4 42.3 40.0 37.6 36.3
2/3 44.5 43.6 42.8 41.9 40.0 38.0 37.0
45 150.1 49.1 48.1 47.1 45.0 42.8 41.7
2/3 49.3 48.5 47.6 46.8 45.0 43.2 42.2
50 1/2 55.6 54.6 53.5 52.3 50.0 47.6 46.3
354.8 53.9 52.9 52.0 50.0 48.0 46.9
60 168.3 66.7 65.1 63.4 60.0 56.4 54.4
266.8 65.5 64.1 62.8 60.0 57.1 55.5
365.7 64.6 63.5 62.4 60.0 57.5 56.3
63 170.1 68.7 67.3 65.9 63.0 59.9 58.3
2/3 69.0 67.9 66.7 65.5 63.0 60.4 59.1
PH_03.book Seite 113 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
114 Siemens · 10/2015
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Miniature Circuit Breakers
Let-through I
2
t values 5SJ4. . .-.HG
Characteristic B
Characteristic C
Characteristic D
50/60/63 A
10 A
6 A
10 -1
10
-1
10
-2
246
2
4
6
10
0
2
4
6
10
1
2
4
6
10
2
2
4
6
10
3
2
4
6
8 2 468 2 46810
010
110
2
13/15/16/20 A
25/30/32/35/40/45 A
I201_13382
10
-2
10
-2
10
-3
246
2
4
6
10
-1
2
4
6
10
0
2
4
6
10
1
2
4
6
10
2
2
4
6
8 2 468 2 468 2 46810
-1
10
0
10
1
10
2
45/50/60/63 A
8/10 A
6 A
2 A
3/4/5 A
1,6 A
1 A
0,5 A
0,3 A
13/15/16 A
20/25/30/32/35/40 A
I201_13383a
10
-2
10
-1
10
-2
246
2
4
6
10
0
2
4
6
10
1
2
4
6
10
2
2
4
6
10
3
2
4
6
8 2 468 2 468 2 46810
-1 10
010
110
2
30/32/35 A
8/10/13 A
2 A
3 A
4 A
5/6 A
1,6 A
20 A
25 A
1 A
0,5 A
0,3 A
15/16 A
40/45/50/60/63 A
I201_13384
PH_03.book Seite 114 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
115
Siemens · 10/2015
Miniature Circuit Breakers
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
■
Dimensional drawings
5SJ4...-.HG40 5SJ4...-.HG41
5SJ4...-.HG42
5ST3010-0HG 5ST3011-0HG 5ST3012-0HG
5ST3020-0HG 5ST3021-0HG 5ST3022-0HG
5ST3030-0HG
5ST3031-0HG
5ST3663-0HG 5ST3664-0HG 5ST3665-0HG
5ST3663-1HG 5ST3664-1HG 5ST3665-1HG
5ST3663-2HG 5ST3664-2HG 5ST3665-2HG
5ST3666-1HG
Note:
Pin spacing in MW
Dimensions of side view in mm, approx.
Note:
Pin spacing in MW
Dimensions of side view in mm, approx.
44
70
6
45
90
I201_13385
18
1
2
18 36 54
I201_12749
45
110
46
6,4
70
I201_13958a
45
121
90
54 46
6,4
70
3618
96,4 46
45
110
70
I201_17025
18 6,4 46
45
110
70
I201_17022
I201_14010a
15
1 1 1 1
35
24
1 1
I201_14014
16
PH_03.book Seite 115 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
116 Siemens · 10/2015
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Miniature Circuit Breakers
■
Circuit diagrams
Graphical symbols
Miniature circuit breakers Additional components
5ST3666-0HG 5ST3666-2HG
5ST3770-3HG 5ST37..-3HG
I201_14015
31
14
46
26
16
I201_14016
31
18
51
I201_19216
14
16,2 31,1
63
82,6
I201_19215
13,8
58
22
51,8
5SJ4...-.HG
1P 2P 3P
1
2
1
2
3
4
2
1
4
3
6
5
Auxiliary switches (AS)
5ST3010-0HG 5ST3011-0HG 5ST3012-0HG
Fault signal contacts (FC)
5ST3020-0HG 5ST3021-0HG 5ST3022-0HG
Shunt trips (ST)
5ST3030-0HG
5ST3031-0HG
22
14
13
21
24
14
13
23
22
12
11
21
22
14
13
21
24
14
13
23
22
12
11
21
C2
C1
PH_03.book Seite 116 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
117
Siemens · 10/2015
Miniature Circuit Breakers
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
■
More information
Rated switching capacity acc. to UL 489
Designation Characteristic Current Rated switching capacity
(operational voltage 240 V AC)
Rated switching capacity
(operational voltage 480Y/277 V AC)
AkA AC kA AC
5SJ4…-.HG40 B6 ... 63 14 --
C 0.3 ... 40 14 --
C45 ... 63 10 --
D0.3 ... 20 14 --
D 25 ... 63 10 --
5SJ4…-.HG41 C 0.3 ... 40 14 --
C45 ... 63 10 --
D0.3 ... 20 14 --
D 25 ... 63 10 --
5SJ4…-.HG42 C 0.3 ... 40 14 10
D0.3 ... 20 14 10
D25 ... 32 10 10
PH_03.book Seite 117 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
118 Siemens · 10/2015
5SJ4...-.HG miniature circuit breakers acc. to UL 489 and IEC, and accessories
Miniature Circuit Breakers
Internal resistance and power loss per pole at I
n
Mounting concept for mounting 5ST30..-0HG accessories on
5SJ4...-.HG miniature circuitbreakers
The diagram shows which additional components can be
mounted on the right.
Rated tripping current I
i
of the instantaneous tripping operation
Rated current Characteristic B Characteristic C Characteristic D
I
n
R
i
P
v
R
i
P
v
R
i
P
v
A mΩW mΩW mΩW
0.3 -- -- 12900 1.2 12600 1.1
0.5 -- -- 4900 1.2 4600 1.2
1-- -- 1650 1.7 1480 1.5
1.6 -- -- 620 1.6 570 1.5
2-- -- 440 1.8 435 1.8
3-- -- 197 1.8 190 1.7
4-- -- 115 1.8 100 1.6
5-- -- 115 2.9 100 2.5
685 3.1 74 2.7 73 2.6
8-- -- 40 2.6 39 2.5
10 16.5 1.7 13.5 1.4 11.9 1.2
13 11.7 2.0 10.2 1.7 10.2 1.7
15 8.5 1.9 7.8 1.8 7.7 1.7
16 8.5 2.2 7.8 2.0 7.7 2.0
20 6.7 2.7 5.5 2.2 5.5 2.2
25 4.3 2.7 4.2 2.6 4.2 2.6
30 3.4 3.1 3.5 3.2 3.0 2.7
32 3.4 3.5 3.5 3.6 3.0 3.1
35 2.8 3.4 2.8 3.4 2.7 3.3
40 2.8 4.5 2.8 4.5 2.5 4.0
45 2.8 5.7 2.7 5.5 2.5 5.1
50 2.1 5.3 2.1 5.0 2.0 5.0
60 1.7 6.1 1.7 6.1 1.7 6.1
63 1.7 6.7 1.7 6.7 1.7 6.7
MCB: Miniature circuit breaker
ST: Shunt trip
AS: Auxiliary switch
FC: Fault signal contact
or or or
or or or
Max. 1 shunt trip (ST) can be mounted on the right of the
miniature circuit breaker (MCB). 2 auxiliary switches (AS)
or fault signal contacts (FC) can also be mounted to the
right of the ST in any combination
2 auxiliary switches (AS) or fault signal contacts (FC) can
be mounted to the right of the miniature circuit breaker
(MCB) in any combination 5ST30.
MCB
AS FC AS
FC
AS
FC
AS
FC
FC
AS
FC
AS
AS FC AS
FC
AS
FC
AS
FC
I201_18121
5SJ4 ...-.HG..
ST
Characteristic Rated current I
n
I
i
[A]
B6 ... 63 A 4 I
n
C5 A 6.5 I
n
C0.5 ... 4 A, 6 ... 13 A, 20 ... 63 A 7.5 I
n
C16 A 8 I
n
C0,3 A, 15 A 8.5 I
n
D0.3 A 8.5 I
n
D8 A 10 I
n
D1 A, 35 A 11 I
n
D32 A 11.5 I
n
D30 A, 63 A 12 I
n
D50 A, 60 A 12.5 I
n
D0.5 A 13.5 I
n
D1.6 A, 2 A, 4 A, 6 A, 10 ... 25 A, 40 A, 45 A 14 I
n
D3 A 14.5 I
n
D5 A 16 I
n
PH_03.book Seite 118 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
119
Siemens · 10/2015
Miniature Circuit Breakers
SHU 5SP3 main miniature circuit breakers
■
Overview
The selective main miniature circuit breaker is used as a circuit
breaker on meter panels.
Characteristic E is adapted to the special application
requirements for cascade circuits between melting fuses and
miniature circuit breakers in distributor circuits.
Used in conjunction with downstream miniature circuit breakers,
SHU 5SP3 main miniature circuit breakers ensure effective
protection and optimum availability of the plant.
■
Benefits
• Quick and easy installation on standard mounting rail
• Reliable and high selectivity
• Optimum availability of the consumer load
• The SHU 5SP3 main miniature circuit breaker operates on a
voltage-independent basis
• High and safe selectivity between sub-distribution and meter
panel ensures the continued supply of the unaffected circuits
in the event of a fault, thus improving system availability
• In the event of a fault, the SHU 5SP3 main miniature circuit
breaker prevents an existing short-circuit from being
reconnected until the cause of the fault has been eliminated
• The SHU 5SP3 selective main miniature circuit breaker
ensures fast and safe disconnection and reconnection of
loads
• It complies with all the requirements of TAB 2007 and can
therefore be used in metering systems
■
Technical specifications
5SP37.., 5SP37..-1 5SP37..-2,
5SP37..-2KK0.
5SP38..-2
Standards DIN VDE 0645 DIN VDE 0641-21
Rated voltage U
n
•1-pole V AC 230/400 --
• 3 x 1-pole V AC 400 -- 400
Operational voltage Min. V AC 110
Max. V AC 440
Rated frequency Hz 50 ... 60
Rated current I
n
A16 ... 100 16 ... 63
Rated insulation voltage U
i
V AC 690
Rated making and breaking capacity
I
cn
A25000
Insulation coordination
• Overvoltage category IV
• Pollution degree 3
Impulse withstand voltage U
imp
kV 6
Impact resistance 30 g, at least 3 impacts, impact duration 11 ms
Resistance to vibrations 2 g, 20 frequency cycles 5 ... 150 ... 15 Hz
Switching position indication OFF = green, ON = red
Main switch characteristics Acc. to EN 60204-1 Yes
Handle end position, sealable Yes
Cutoff ON/OFF -- Locking slide with lock, additional wire seal, cable
ties and Antilux
Device depth mm 92
Degree of protection IP20, with connected conductors
Mains connection Any
Mounting position Any
Mounting On standard mounting rail
or interface adapter
Direct tool-free mounting on the busbar system
Service life, on average, with rated load Actuations 20000
Wire connections Saddle terminals at both
ends
• Top Screwless spring terminal for flexible cables,
in particular for meter connecting cables
acc. to DIN 43870-3
•Bottom Box terminal, also for infeed to the busbar system,
up to 100 A infeed current
Conductor cross-sections
• Top and bottom, solid and stranded mm
2
2.5 ... 70 --
• Top and bottom, finely stranded mm
2
2.5 ... 50 --
• Top, finely stranded mm
2
-- 2.5 ... 16
• Bottom, solid, stranded and finely stranded, with end sleeve mm
2
-- 2.5 ... 50
Storage temperature °C -40 ... +70
Ambient temperature °C -25 ... +55
PH_03.book Seite 119 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
120 Siemens · 10/2015
SHU 5SP3 main miniature circuit breakers
Miniature Circuit Breakers
5SP37..-3 5SP38..-3 5SP32..-3 5SP33..-3 5SP34..-3
Standards DIN VDE 0641-21
Rated voltage U
n
•1-pole V AC 230 -- -- -- --
• 3 x 1-pole V AC -- 230 -- -- --
•2-pole V AC -- -- 400 -- --
•3-pole V AC -- -- -- 400 --
•4-pole V AC -- -- -- -- 400
Operational voltage Min. V AC 110
Max. V AC 440
Rated frequency Hz 50 ... 60
Rated current I
n
A16 ... 63
Rated insulation voltage U
i
V AC 690
Rated making and breaking capacity I
cn
A25000
Insulation coordination
• Overvoltage category IV
• Pollution degree 3
Impulse withstand voltage U
imp
kV 6
Impact resistance 25 g, at least 3 impacts, impact duration 13 ms
Resistance to vibrations 2 g, 20 frequency cycles 5 ... 150 ... 15 Hz
Switching position indication OFF = green, ON = red
Isolating function Acc. to DIN VDE 0100-0537 Yes
Handle end position, sealable Yes
Cutoff ON/OFF Integrated locking slide, lockable by means of a lock, wire seal and cable ties
Device depth mm 91.1
Degree of protection IP40, with mounted distribution cover, cutout dimension 46 mm
Mains connection Any
Mounting position Any
Mounting On standard mounting rail 35 mm acc. to EN 60715
Wire connections Box terminals
Conductor cross-sections
• Top and bottom, solid, stranded and finely stranded mm
2
2.5 ... 50
Storage temperature °C -40 ... +70
Ambient temperature °C -25 ... +55
PH_03.book Seite 120 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
121
Siemens · 10/2015
Miniature Circuit Breakers
SHU 5SP3 main miniature circuit breakers
■
Configuration
Internal resistances and power losses
• Internal resistances per pole in mΩ cold state
• Power loss per pole in W for rated current
Selectivity
Short-circuit selectivity between the SHU 5SP3 main miniature
circuit breakers and downstream 5SL/5SY miniature circuit
breakers
Due to its principle of action, the SHU 5SP3 main miniature
circuit breaker is always short-circuit-selective up to the rated
switching capacity of the downstream 5SL/5SY miniature circuit
breaker, e.g. 6000 A or 10000 A.
Selectivity of the SHU 5SP3 for the upstream fuse 3NA gG
T: Total selectivity up to the rated switching capacity I
cn
of the downstream SHU 5SP3 main miniature circuit breaker.
Type Rated current R
i
P
max
A mΩW
5SP37..-2,
5SP37..-2KK0.,
5SP38..-2
16 15.3 4.5
20 11.3 6.0
25 8.7 6.5
35 4.5 6.9
40 3.8 6.4
50 3.5 8.0
63 2.3 9.7
5SP3...-3 16 15.3 4.1
20 11.3 5.4
25 8.7 5.9
35 4.5 6.3
40 3.4 6.1
50 2.9 7.6
63 2.1 8.7
5SP37..,
5SP37..-1
16 15.5 5.2
20 12.5 6.5
25 7.4 6.5
32 5.3 7.2
35 4.0 7.6
40 4.0 8.0
50 2.9 9.5
63 2.0 9.9
80 1.5 13.5
100 1.0 14.4
I201_19073
230 V
SHU MCB
S
*
I201_19074
230 V
SHU
S
*
Selectivity of the SHU 5SP3... main miniature circuit breaker for the upstream fuse 3NA... [kA]
Fuse 3NA
Operational class gG
Rated voltage U
n
[AC V] 230/400
Downstream main miniature circuit
breaker (SHU)
Back-up fuse
32 35 40 50 63 80 100 125 160 200 224 250 300
SHU type: 5SP3...
Characteristic E
I
cn
[kA] = 25 kA
E16 -- 0.55 0.75 1.1 1.9 3.3 814.6 TTTTT
E20 -- 0.48 0.6 0.9 1.5 2.5 4.5 7.2 12.8 T T T T
E25 -- 0.48 0.6 0.9 1.5 2.5 4.5 7.2 12.8 T T T T
E35 -- -- 0.6 0.9 1.5 2.5 4.5 7.2 12.8 T T T T
E40 -- -- -- 0.7 1.3 23.6 5.5 8.9 T T T T
E50 -- -- -- -- 1.3 23.6 5.5 8.9 T T T T
E63 -- -- -- -- 1.3 23.6 5.5 8.9 T T T T
PH_03.book Seite 121 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
122 Siemens · 10/2015
SHU 5SP3 main miniature circuit breakers
Miniature Circuit Breakers
Selectivity for the cascade: Fuse 3NA gG – SHU 5SP3 main miniature circuit breaker – 5SL/5SY miniature circuit breaker
In a cascade connection
1)
with upstream fuse,
SHU 5SP3 main miniature circuit breakers and
miniature circuit breakers, the following values result:
T: Total selectivity up to the rated switching capacity I
cn
of the downstream miniature circuit breaker.
1)
The selectivity limit results from the intersection of the let-through I
2
t value
of the SHU 5SP3 main miniature circuit breaker and miniature circuit
breaker combination with the melting integral of the fuse according to
EN 60269 (VDE 0636).
I201_06718b
230 V
SHU MCB
S
*
Selectivity for the cascade:
Fuse 3NA gG – SHU 5SP3 main miniature circuit breaker – 5SL/5SY miniature circuit breaker [kA]
Fuse 3NA
Operational class gG
Rated voltage
U
n
[AC V]
230/400
SHU 5SP3...
Characteristic E
Downstream
miniature circuit breakers
Back-up fuse
63 A 80 A 100 A 125 A
SHU
I
n
[A] E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63
Circuit breaker
type:
5SY6n..-.
(n=1...6)
5SL6...-.
Characteristic B/C
I
cn
[kA] = 6
0.3 T T T T T T T T T T T T T T T T
0.5 T T T T T T T T T T T T T T T T
1T T T T T T T T T T T T T T T T
1.5 T T T T T T T T T T T T T T T T
2T T T T T T T T T T T T T T T T
3T T T T T T T T T T T T T T T T
4T T T T T T T T T T T T T T T T
6T T T T T T T T T T T T T T T T
8T T T 5 T T T T T T T T T T T T
10 T T T 5 T T T T T T T T T T T T
13 T T T 5 T T T T T T T T T T T T
16 5 5 5 4 T T T T T T T T T T T T
20 -- 44.5 4-- TTT-- TTT-- T T T
25 -- -- 43-- -- T5.5 -- -- T T -- -- T T
32 -- -- -- 3-- -- -- 5-- -- -- T-- -- -- T
40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
PH_03.book Seite 122 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
123
Siemens · 10/2015
Miniature Circuit Breakers
SHU 5SP3 main miniature circuit breakers
T: Total selectivity up to the rated switching capacity I
cn
of the downstream miniature circuit breaker.
Selectivity for the cascade:
Fuse 3NA gG – SHU 5SP3 main miniature circuit breaker – 5SL/5SY miniature circuit breaker [kA]
Fuse 3NA
Operational class gG
Rated voltage
U
n
[AC V]
230/400
SHU 5SP3...
Characteristic E
Downstream
miniature circuit breakers
Back-up fuse
63 A 80 A 100 A 125 A
SHU
I
n
[A] E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63
Circuit breaker
type:
5SY4...-.
5SL4...-.
Characteristic B/C
I
cn
[kA] = 10
0.3 TTTTTTTTTTTTTTTT
0.5 TTTTTTTTTTTTTTTT
1TTTTTTTTTTTTTTTT
1.5 TTTTTTTTTTTTTTTT
2TTTTTTTTTTTTTTTT
3TTTTTTTTTTTTTTTT
4TTTTTTTTTTTTTTTT
67777TTT7TTTTTTTT
87665TTT7TTTTTTTT
10 66657777TTTTTTTT
13 66657776TTTTTTTT
16 55547776TTTTTTTT
20 -- 44.5 4-- 766-- TTT-- TTT
25 -- -- 4 3 -- -- 65.5 -- -- T T -- -- T T
32 -- -- -- 3-- -- -- 5-- -- -- 7-- -- -- T
40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Circuit breaker
type:
5SY4...-8
5SL4...-8
Characteristic D
I
cn
[kA] = 10
0.3 TTTTTTTTTTTTTTTT
0.5 TTTTTTTTTTTTTTTT
1TTTTTTTTTTTTTTTT
1.5 TTTTTTTTTTTTTTTT
2TTTTTTTTTTTTTTTT
3TTTTTTTTTTTTTTTT
47777TTT7TTTTTTTT
67666TTT7TTTTTTTT
866657777TTTTTTTT
10 66657776TTTTTTTT
13 5.5 65.5 47776TTTTTTTT
16 54.5 4.5 467767TTTTTTT
20 -- 3.5 43.5 -- 6 6 5.5 -- 7TT-- TTT
25 -- -- 3.5 3-- -- 5.5 5-- -- 7 7 -- -- T T
32 -- -- -- 2.5 -- -- -- 4.5 -- -- -- 6-- -- -- T
40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
PH_03.book Seite 123 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
124 Siemens · 10/2015
SHU 5SP3 main miniature circuit breakers
Miniature Circuit Breakers
T: Total selectivity up to the rated switching capacity I
cn
of the downstream miniature circuit breaker.
Selectivity for the cascade:
Fuse 3NA gG – SHU 5SP3 main miniature circuit breaker – 5SL/5SY miniature circuit breaker [kA]
Fuse 3NA
Operational class gG
Rated voltage
U
n
[AC V]
230/400
SHU 5SP3...
Characteristic E
Downstream
miniature circuit breakers
Back-up fuse
63 A 80 A 100 A 125 A
SHU
I
n
[A] E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63 E35 E40 E50 E63
Circuit breaker
type:
5SY7...-.
Characteristic B/C
I
cn
[kA] = 15
0.3 TTTTTTTTTTTTTTTT
0.5 TTTTTTTTTTTTTTTT
1TTTTTTTTTTTTTTTT
1.5 TTTTTTTTTTTTTTTT
2TTTTTTTTTTTTTTTT
3TTTTTTTTTTTTTTTT
410 10 10 10 TTTTTTTTTTTT
67777TTT7TTTTTTTT
87665TTT7TTTTTTTT
10 66657777TTTTTTTT
13 6665777610 10 10 10 TTTT
16 5554777610 10 10 10 TTTT
20 -- 44.5 4-- 766-- 10 10 10 -- TTT
25 -- -- 4 3 -- -- 65.5 -- -- 10 10 -- -- 10 10
32 -- -- -- 3-- -- -- 5-- -- -- 7-- -- -- 10
40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Circuit breaker
type:
5SY7...-8
Characteristic D
I
cn
[kA] = 15
0.3 TTTTTTTTTTTTTTTT
0.5 TTTTTTTTTTTTTTTT
1TTTTTTTTTTTTTTTT
1.5 TTTTTTTTTTTTTTTT
2TTTTTTTTTTTTTTTT
310 10 10 10 TTTTTTTTTTTT
47777TTT10 TTTTTTTT
67666TTT7TTTTTTTT
8666510 10 10 7TTTTTTTT
10 6665777610 10 10 10 TTTT
13 5554.5 777610 10 10 10 TTTT
16 4.5 4.5 4.5 4676610 10 10 10 10 TTT
20 -- 3.5 43.5 -- 6 6 5.5 -- 10 10 10 -- 10 10 10
25 -- -- 3.5 3-- -- 5 5 -- -- 7 7 -- -- 10 10
32 -- -- -- 2.5 -- -- -- 4.5 -- -- -- 6-- -- -- 10
40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
PH_03.book Seite 124 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
125
Siemens · 10/2015
Miniature Circuit Breakers
SHU 5SP3 main miniature circuit breakers
■
Characteristic curves
Characteristic E acc. to DIN VDE 0641-2
5SP3.16-3, 5SP3.20-3, 5SP3.25-3 5SP3.35-3, 5SP3.40-3, 5SP3.50-3, 5SP3.63-3
Peak let-through current
5SP37. ., 5SP37. .-1
Let-through current I
max
for SHU breakers
5SP3. . .-2; 5SP37. .-2KK0.; 5SP3. . .-3; 16 ... 63 A
2
6
104
103
102
101
100
10-1
10-2
100
4
2
6
4
2
6
4
2
6
4
2
6
4
2
6
4
101
23456789 23
[s]
E16/20/25
Multiple of rated current
Tripping time
I201_19058
[s]
2
6
104
103
102
101
100
10-1
10-2
100
4
2
6
4
2
6
4
2
6
4
2
6
4
2
6
4
101
23456789 23
E35/40/50/63
Multiple of rated current
Tripping time
I201_19059
102
100101
468 2 468 2 468
100
101
2
4
6
100 A
80 A
63 A
50 A
40 A
35 A
32 A
25 A
20A
16 A
p
I201_13662a
max
p
C0,3
C0,5
C1
C2
C6
C8
C3/4
C16
C50/63
C32/40
C10/13
C20/25
C1,6
5000
4000
3000
2000
1000
0
0 1000 2000 3000 4000 5000 70006000
Let-Through Current
Prospective Short-Circuit Current
I201_19085
PH_03.book Seite 125 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
126 Siemens · 10/2015
SHU 5SP3 main miniature circuit breakers
Miniature Circuit Breakers
Let-through current
5SP3...-3
Let-through I²t values
5SP37. ., 5SP37. .-1
Let-through I²t values
5SP3. . .-3
Let-through I²t values for SHU breakers
5SP3. . .-2; 5SP37. .-2KK0.; 5SP3 . . .-3; 16 ... 63 A
E40/50/63
E20/25/35
E16
Imax [A]
103
104
2
4
3
6
7
8
9
5
Ip [A]
103104105
22443366557788
Prospective short-circuit-current
Let-Through Current
I202_24876
102
100101
468 2 468 2 468
101
102
4
6
2
4
6
2
80 A
50 A
63 A
40 A
35 A
25 A
20 A
16 A
32 A
100 A
I201_13661
Ip [A]
103
104
105
2
4
3
6
7
8
9
5
2
2
4
3
6
7
8
9
5
103104
22443365578
E40/50/63
E20/25/35
E16
[A2s]
prospective short-circuit-current
I2t-Value
I201_19060
Ip [A]
103
104
105
2
4
3
6
7
8
9
5
2
2
4
3
6
7
8
9
5
103104
22443365578
E40/50/63
E20/25/35
E16
[A2s]
prospective short-circuit-current
I2t-Value
I201_19060
PH_03.book Seite 126 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
127
Siemens · 10/2015
Miniature Circuit Breakers
SHU 5SP3 main miniature circuit breakers
■
Dimensional drawings
5SP37. .-2
5SP37. .-2KK0.
5SP38. .-2
1P 3 x 1P
151,3
27
81
151,3
45
151,3
89,5
5716,5
L2 L1L3
5SP37. .
5SP37. .-1
5SP37..-3
1P
91
35
145
45
70
26,8 6,7 91,1
76,3
128
I202_24838
44
45
5SP38..-3 5SP32..-3
3 x 1P 2P
5SP33..-3 5SP34..-3
3P 4P
80,4 91,1
128
I202_24839
6,7
44
45
76,3
53,6
I202_24835
91,1
76,3
128
6,7
44
45
80,4
44
128
I202_24836
91,1
76,3
6,7
45
107,2
I202_24837
128
91,1
76,3
6,7
44
45
PH_03.book Seite 127 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
128 Siemens · 10/2015
SHU 5SP3 main miniature circuit breakers
Miniature Circuit Breakers
■
Circuit diagrams
Graphical symbols
5SP37. .
5SP37. .-1
5SP37. .-2
5SP37. .-3
5SP37. .-2KK0.
5SP38. .-2
5SP38. .-3
5SP32..-3 5SP33..-3 5SP34..-3
1P 3 x 1P 2P 3P 4P
2
1
S
SSS
2
1
2
1
2
1
4
3
2
1
SS
SSS
6
5
4
3
2
1
SSSS
8
7
6
5
4
3
2
1
PH_03.book Seite 128 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
129
Siemens · 10/2015
Miniature Circuit Breakers
Circuit breaker terminals
■
Overview
Circuit breaker terminals are used for short-circuit protection or
for protection against overload and short circuits in auxiliary and
control circuits downstream of control transformers. All terminals
are designed for 2 wires. The terminal block labeling
accessories are used for inscription.
These devices are listed as "Supplementary Protectors"
according to UL 1077 (UL Recognized Components) and
CSA 235 (CSA Component Accepted).
■
Technical specifications
5SK9011-1KK2.,
5SK9011-2KK2.
5SK9011-4KK2.,
5SK9011-6KK2.,
5SK9011-8KK2.
Standards DIN VDE 0660-101, IEC/EN 60947-2, UL 1077
Rated operational voltage Max. AC 250 V at 50/60 Hz
DC 60 V
Operational voltage Min. V AC/DC 24
Power losses
Main contacts Max. W 1.3
Auxiliary contacts Max. mW 4.2 (at 1 A)
Through-type connection Max. mW 230 (at 16 A)
Rated impulse withstand voltage kV 4
Pollution degree Acc. to EN 60664-1 3
Rated current of through-type connection A 16
Rated operational current of the auxiliary switch A 1
Mechanical service life Actuations 16000
Electrical service life on average, with rated load Actuations 8000
Polarity with direct current Any
Mounting position Any
Resistance to vibrations 10 g at ≤70 Hz
Enclosure With thermoplastic insulating body
Screw connection at both ends for 2 conductors each
Enclosed at both ends
Touch protection Acc. to EN 50274-1 Ye s
Mounting width mm 12.5 22.5
Terminal tightening torque, recommended Nm 0.8
Conductor cross-sections
• Solid mm
2
1 or 2 × (0,75 ... 1,5)
• Finely stranded, with end sleeve mm
2
1 or 2 × (1 ... 2,5)
•UAWG 14-12 Yes --
•sAWG 14 Yes --
Stripped length mm 10
PH_03.book Seite 129 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
130 Siemens · 10/2015
Circuit breaker terminals
Miniature Circuit Breakers
■
Characteristic curves
Tripping characteristics of short-circuit releases Tripping characteristics of combined overload and short-circuit releases
■
Dimensional drawings
■
Circuit diagrams
Graphical symbols
1
1
2
2
4
4
10
10
20
20
40
40
60 s =
1 min
10060
6
6
I201_18195
DC
AC
Multiple of rated current
Tripping time
Seconds
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
0.1 0.2 0.4
1
2
4
10
20
40
60 s =
1 min
6
2
4
10
20
40
6
60
120
302015108654321
I201_18196
Multiple of rated current
Tripping time
Seconds
0.01
0.02
0.04
0.1
0.2
0.4
0.06
0.6
1.5
DC
AC
5SK9011-1KK2.
5SK9011-2KK2.
5SK9011-4KK2.
5SK9011-6KK2.
5SK9011-8KK2.
22,5
76
92
4
12
41
73
89
81
I201_13685
81
22,5
76
92
4
22,5
41
73
89
10,7
I201_13686
5SK9011-1KK2. 5SK9011-2KK2.
5SK9011-6KK2. 5SK9011-4KK2. 5SK9011-8KK2.
1
2
1
2
11321
21422
1
2
21
22
3
4
1
2
13
14
21
22
PH_03.book Seite 130 Dienstag, 12. Januar 2016 9:28 09
© Siemens AG 2016
© Siemens AG 2016
The information provided in this brochure contains merely general
descriptions or characteristics of performance which in case of actual
use do not always apply as described or which may change as a result
of further development of the products. An obligation to provide the
respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are subject
to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for their
own purposes could violate the rights of the owners.
Siemens AG
Energy Management
Low Voltage & Products
Postfach 10 09 53
93009 REGENSBURG
GERMANY
Subject to change without prior notice
PDF (3ZW1012-5SL61-0AC1)
PH 0216 130 En
Produced in Germany
© Siemens AG 2016
www.siemens.com/lowvoltage
© Siemens AG 2016
