DC/DC Converters TMR 2WI Series, 2 Watt Features Ultra-wide 4:1 input range SIP-9 package Full SMD design Temperature range -40 to +85C High efficiency Excellent load and line regulation Indefinite short-circuit protection I/O isolation 1500 VDC Remote On/Off control Fully RoHS compliant 3-year product warranty The TMR-2WI series is a new family of isolated 2W dc-dc converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product comes in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows -40C to +85C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. 3.3 VDC 500 mA 71 % TMR 2-2411WI 5 VDC 400 mA 76 % TMR 2-2412WI 12 VDC 165 mA 79 % 15 VDC 135 mA 80 % 5 VDC 200 mA 73 % TMR 2-2422WI 12 VDC 85 mA 77 % TMR 2-2423WI 15 VDC 65 mA 79 % TMR 2-4810WI 3.3 VDC 500 mA 70 % TMR 2-4811WI 5 VDC 400 mA 72 % 12 VDC 165 mA 78 % 15 VDC 135 mA 78 % 5 VDC 200 mA 70 % TMR 2-4822WI 12 VDC 85 mA 76 % TMR 2-4823WI 15 VDC 65 mA 76 % TMR 2-2410WI TMR 2-2413WI TMR 2-2421WI TMR 2-4812WI TMR 2-4813WI TMR 2-4821WI http://www.tracopower.com 9 - 36 VDC (24 VDC nominal) 18 - 75 VDC (48 VDC nominal) Page 1 of 3 DC/DC Converters TMR 2WI Series 2 Watt Input Specifications Input current at no load (nominal input) 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. Input current at full load (nominal input) 24 Vin models: 110 mA typ. 48 Vin models: 55 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 0.5 A max. Input Filter capacitor type Start up time <1ms (at nominal input and resistive load) Output Specifications Voltage set accuracy 2 % Regulation - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 25 - 100 % single output models: 0.75 % max. dual output models: 2.0 % max. (balanced load) Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experianced) Temperature coefficient 0.02 %/C max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Transient response (25 % load step change) 300 s max. Short circuit protection continuous (automatic recovery) Capacitive load 3.3 VDC 5 VDC 12 VDC 15VDC 5 VDC 12 VDC 15 VDC models: models: models: models: models: models: models: 2'200 F max. 1'000 F max. 170 F max. 110 F max. 470 F max. (each output) 100 F max. (each output) 47 F max. (each output) General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +90C max. - Storage -55C to +105C Derating (convection cooling) 2.9 %/K above 65C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >1 Mio h Isolation voltage (60 sec.) - Input/Output 1'500 VDC Isolation capacitance - Input/Output 500 pF max. Isolation resistance - Input/Output (500 VDC) >1`000 M Ohm Switching frequency 100 to 650 kHz (PFM) Remote On/Off control - On: <0.6 VDC or open circuit - Off: 2.9 to 15 VDC - Off stand by input current 1 mA typ / 3 mA max. Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMR 2WI Series 2 Watt Physical Specifications Casing material non-conductive plastic (UL 94V-0 rated) Potting material epoxy (UL 94V-0 rated) Weight 6.5 g (0.23 oz) Soldering temperature max. 260C / 10 sec. Supporting documents: www.tracopower.com/overview/tmr2wi Outline Dimensions 3.2 (0.13) (0.49) 12.5 Pin-Out 1.8 2 x 2.54 7.62 3 x 2.54 (0.07) (2 x 0.1) (0.3) (3 x 0.1) 26.0 (1.02) Pin Single Dual 1 -Vin (GND) -Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 6 +Vout +Vout 7 ntc Common 8 ntc ntc 9 -Vout -Vout 6 7 8 9 2.75 9.3 (0.36) 3 (0.11) 2 0.3 Bottom view 1 (0.012) (ntc = not to connect) 0.5 (0.02) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Pin pitch tolerances 0.2 (0.008) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev August 23, 2018 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TMR 2-2422WI TMR 2-2412WI TMR 2-4811WI TMR 2-2411WI TMR 2-4812WI TMR 2-4821WI TMR 2-2410WI TMR 2-2421WI TMR 2-2423WI TMR 2-4810WI TMR 2-4823WI TMR 2-4813WI TMR 2-2413WI TMR 2-4822WI