2001-01-17
AZ2150
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 30 A 120 VAC Res. (N.O.)
Operate Time (max.) Max. 12 ms
Typical: 8 ms
Release Time (max.) Max. 5 ms
Typical: 3.5 ms
Dielectric Strength 2500 Vrms contact to coil
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -55°C (-67°F) to 100°C (212°F) Class B
-55°C (-67°F) to 125°C (257°F) Class F
Storage -55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Vibration 0.062" DA at 10–55 Hz
Shock 20 g
Enclosure P. B.T. polyester
Terminals Tinned copper alloy
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 25 grams
MINIATURE
POWER RELAY
FEATURES
•30 Amp switching capability for both N.O. and
N.C. contacts
•1 Form A, B and C contacts available
•DC coils to 120 VDC
•Life expectancy to 10 million operations
•Class B insulation standard
•Class F (155°C) version available
•Available with an epoxy seal for automatic wave
soldering and immersion cleaning
•UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact
rating requirements
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings.
AZ2150 Series meets UL 508 Group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 Series meets UL 508
Group B spacing requirements.
Material Silver cadmium oxide
Resistance < 20 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage 500 mW
(typical)
Max. Continuous 2.2 W at 20°C (68°F) ambient
Dissipation 1.8 W at 40°C (104°F) ambient
Temperature Rise 43°C (77°F) at nominal coil voltage
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.