Caractéristiques de sortie (à 20°) / Output characteristics(20
°
C)
Paramètre / Parameter Unit
Tension nominale / Nominal voltage -VDC
Plage tension de fonctionnement / Operating range 2 à/to 60 VDC
Tension crête / Peak voltage 60 VPEAK
Courant nominal (voir les caractéristiques thermiques)
/ Nominal current (see thermal curves) 3A
Courant de surcharge accidentel admissible maximum
/ Maximum accidental overload current 10 APEAK
Chute tension directe (In) / On state voltage drop (IN) 1,6 VDC
Courant de fuite état bloqué
/ Off state leakage current 1mA
Courant de charge minimum / Minimum load current 5mA
Temps de fermeture / Turn on time 200 µs
Temps d'ouverture / Turn off time 800 µs
Fréquence d'utilisation / Operating frequency 0 à/to 500 Hz
dv/dt état bloqué / Off state dv/dt 200 V/µs
Homologation / Approval Nous consulter /Consult us
page 2 / 2 F/GB
S/MOD/SKD10306/A/29/11/1999
r e l a i s
Rue Ampère B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com
Fax +33 (0) 4 77 53 85 51 Service Commercial France Tél. : +33 (0) 4 77 53 90 20
Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19
www.celduc.com
celduc
Fig.2 Caractéristiques thermiques / thermal curves :
Précautions :
* Les relais à semiconducteurs ne procurent pas d'isolation
galvanique entre le réseau et la charge.
* Dans le cas de plusieurs modules côte à côte, prévoir un dé-
rating en courant.
* Sur charges inductives prévoir une diode de roue libre (ou
écrêteur de surtension ).
Cautions :
* Semiconductor relays don't provide any galvanic insulation
between the load and the mains.
* In case of many SSRs side by side, take a derating current
in to account.
* On inductive loads put a free-wheeling diode (or clamp ).
Courant commuté (A)
/ Switched current (A)
Température ambiante (°C) / Ambient temperature (°C)
0 10 20 30
0 50 60 70 80 90 100 110
0
1
2
3
4
5
Tension de commande/ Input voltage <10VDC sans/ without LED
Tension de commande/ Input voltage =30VDC ou
modèles avec LED/or models with LED