MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MS5 MS5 SERIES 85C 5mm Height. MS5 MH5 105C Version SPECIFICATIONS Items Characteristics Operating Temperature Range -40~+85C Rated Voltage Range 4~50V.DC 20%(20C, 120Hz) Capacitance Tolerance I=0.01CV or 3A whichever is greater. (After 2 minutes application of rated voltage) Leakage Current(MAX) I=Leakage Current(A) Rated Voltage (V) Dissipation Factor(MAX) tan 4 6.3 C=Nominal Capacitance(F) 10 16 25 35 V=Rated Voltage(V) (20C, 120Hz) 50 0.35 0.26 0.22 0.18 0.16 0.14 0.12 After applying rated voltage with max ripple current for 1000 hrs at 85C, the capacitors shall meet the following requirements. Load Life Low Temperature Stability Impedance Ratio(MAX) Capacitance Change Within 25% of the initial value. Dissipation Factor Not more than 200% of the specified value. Leakage Current Not more than the specified value. Rated Voltage(V) 4 6.3 10 16 25 35 50 Z(-25C)/Z(20C) 7 6 4 4 3 2 2 Z(-40C)/Z(20C) 15 12 10 8 6 4 4 (120Hz) MULTIPLIER FOR RIPPLE CURRENT (2) Temperature coefficient (1) Frequency coefficient Frequency(Hz) Coefficient 60(50) 120 500 1k 10k< = 0.1~68F 0.8 1.0 1.20 1.30 1.50 100~330F 0.8 1.0 1.10 1.15 1.20 1 Oct 1999 Ambient Temperature (C) 85 70 50> = Coefficient 1.0 1.6 2.0 MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MS5 DIMENSIONS (mm) SLEEVE 0.5 d F D L+1.5MAX 15MIN 3 3.5 d 0.4 F 1.0 4 5 6.3 8 0.45 1.5 2.0 2.5 D+0.5MAX 4MIN STANDARD SIZE, MAX. PERMISSIBLE RIPPLE CURRENT Size DxL(mm), Ripple Current (mA r.m.s./85C, 120Hz) 4 (0G) WV(V.DC) Size Cap(F) 6.3 (0J) Ripple Size 10 (1A) Ripple Size 16 (1C) Ripple 4.7 6.8 * 4x5 Ripple * 4x5 11 10 * 4x5 13 * 10 * 4x5 14 4x5 16 15 * 4x5 18 4x5 22 * Size 4x5 18 5x5 26 22 * 4x5 20 4x5 22 5x5 30 5x5 35 33 * 4x5 27 5x5 34 5x5 45 6.3x5 51 47 4x5 37 5x5 37 6.3x5 50 6.3x5 65 68 5x5 45 6.3x5 55 6.3x5 59 6.3x5 70 100 5x5 62 6.3x5 62 6.3x5 80 8x5 92 220 6.3x5 74 8x5 120 8x5 145 330 8x5 145 8x5 145 25 (1E) WV(V.DC) Cap(F) Size 35 (1V) Ripple Size 50 (1H) Ripple Size Ripple 0.1 * 4x5 1 0.15 * 4x5 1.5 0.22 * 4x5 2.5 0.33 * 4x5 4 0.47 * 4x5 6 0.68 * 4x5 7 1 * 4x5 8.6 * 4x5 8.7 * 4x5 9.1 1.5 2.2 * 4x5 9 3.3 * 4x5 11 4x5 12 4x5 13 4.7 * 4x5 13 4x5 14 5x5 20 4x5 19 5x5 20 6.3x5 26 5x5 27 5x5 27 6.3x5 31 15 5x5 33 6.3x5 35 6.3x5 39 22 6.3x5 46 6.3x5 46 8x5 60 33 6.3x5 54 8x5 65 47 6.3x5 65 8x5 85 68 8x5 90 100 8x5 120 6.8 10 * 3mm DIA. is available for marked * , and 3.5mm DIA. is available for marked * when specified. 1 Oct 1999