50WQ10FNTRL - International Rectifier

SCHOTTKY RECTIFIER 5.5 Amp

50WQ10FN

Bulletin PD-20526 rev.E 03/03

1www.irf.com

Major Ratings and Characteristics

IF(AV) Rectangular 5.5 A

waveform

VRRM 100 V

IFSM @ tp = 5 µs sine 330 A

VF@ 5 Apk, TJ = 125°C 0.63 V

TJrange - 40 to 150 °C

Characteristics 50WQ10FN Units

Description/ Features

The 50WQ10FN surface mount Schottky rectifier has been

designed for applications requiring low forward drop and

small foot prints on PC board. Typical applications are in disk

drives, switching power supplies, converters, free-wheeling

diodes, battery charging, and reverse battery protection.

Popular D-PAK outline

Small foot print, surface moutable

Low forward voltage drop

High frequency operation

Guard ring for enhanced ruggedness and long term

reliability

D-Pak (TO-252AA)

6.73 (0.2 6)

6.35 (0.25)

5.46 (0.21)

5.21 (0.20)

1.27 (0.0 5)

0.88 (0.03)

5.97 (0.2 3)

1 - Anode

2 - Cathode

3 - Anode

4 - Cathode

1.64 (0.0 2)

1.52 (0.06)

1.15 (0.04)

1.14 (0.04)

0.76 (0.03)

2.28 (0.09)

0.89 (0.03)

0.64 (0.02)

4.57 (0.18)

123

6.22 (0.24)

2.38 (0.09)

2.19 (0.08)

6.45 (0.2 4)

5.68 (0.22)

10.42 (0.41)

9.40 (0.37)

0.46 (0.0 2)

0.58 (0.0 2)

1.14 (0.04)

0.89 (0.0 3)

0.51 (0.0 2)

MIN.

0.58 (0.0 2)

0.46 (0.02)

MINIMUM RECOMMENDED FOO TPRINT

5.97 (0.2 4)

10.67 (0.4 2)

1.65 (0.06)

6.48 (0.26)

2.54 (0.10)

2.28 (0.0 9)

Conform to JEDEC outline D-Pak (Similar to TO-252AA)

Dimensions in millimeters and (inches)

Anode

Base

Cathode

node

4, 2

50WQ10FN

Bulletin PD-20526 rev. E 03/03

2www.irf.com

Part number 50WQ10FN

VRMax. DC Reverse Voltage (V)

VRWM Max. Working Peak Reverse Voltage (V)

Voltage Ratings

VFM Max. Forward Voltage Drop 0.77 V @ 5A

* See Fig. 1 (1) 0.91 V @ 10A

0.63 V @ 5A

0.74 V @ 10A

IRM Max. Reverse Leakage Current 1 mA TJ = 25 °C

* See Fig. 2 (1) 4 mA TJ = 125 °C

VF(TO) Threshold Voltage 0.47 V TJ = TJ max.

rtForward Slope Resistance 21.46 mΩ

CTTypical Junction Capacitance 183 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C

LSTypical Series Inductance 5.0 nH Measured lead to lead 5mm from package body

TJ = 25 °C

TJ = 125 °C

VR = rated VR

Electrical Specifications

Parameters 50WQ... Units Conditions

(1) Pulse Width < 300µs, Duty Cycle < 2%

TJMax. Junction Temperature Range (*) -40 to 150 °C

Tstg Max. Storage Temperature Range -40 to 150 °C

RthJC Max. Thermal Resistance Junction 3.0 °C/W DC operation * See Fig. 4

to Case

wt Approximate Weight 0.3 (0.01) g (oz.)

Case Style D - PAK Similar to TO-252AA

Thermal-Mechanical Specifications

Parameters 50WQ... Units Conditions

100

IF(AV) Max. Average Forward Current 5.5 A 50% duty cycle @ TC = 135°C, rectangular wave form

* See Fig. 5

IFSM Max. Peak One Cycle Non-Repetitive 330 5µs Sine or 3µs Rect. pulse

Surge Current * See Fig. 7 110 10ms Sine or 6ms Rect. pulse

EAS Non-Repetitive Avalanche Energy 6.0 mJ TJ = 25 °C, IAS = 0.5 Amps, L = 40 mH

IAR Repetitive Avalanche Current 0.5 A Current decaying linearly to zero in 1 µsec

Frequency limited by TJ max. VA = 1.5 x VR typical

Absolute Maximum Ratings

Following any rated

load condition and with

rated VRRM applied

Parameters 50WQ... Units Conditions

< thermal runaway condition for a diode on its own heatsink

(*) dPtot 1

dTj Rth( j-a)

50WQ10FN

Bulletin PD-20526 rev. E 03/03

www.irf.com

Fig. 2 - Typical Values of Reverse Current

Vs. Reverse Voltage

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics

Fig. 1 - Maximum Forward Voltage Drop Characteristics

0.0001

0.001

0.01

0.1

100

0 102030405060708090100

125°C

100°C

75°C

50°C

25°C

Reverse Vol tage - V (V)

Re v e rse Current - I ( m A )

T = 150°C

100

1000

020406080100

T = 25°C

Juncti on Capaci tance - C (pF)

Reve rse Voltage - V ( V )

0.01

0.1

0.00001 0.0001 0.001 0.01 0.1 1

thJC

t , Rectangular Pulse Duration (Seconds)

Sin g le Pu lse

(The rma l Resista nc e)

Th ermal Impedanc e Z (°C/W)

D = 0.75

D = 0.50

D = 0.33

D = 0.25

D = 0.20

Notes:

1. Duty factor D = t / t

2. Peak T = P x Z + T

thJC C

100

1000

00.511.522.533.5

Instan taneous Forward Current - I (A )

Forward Voltage Drop - V (V)

T = 150°C

T = 125°C

T = 25°C

50WQ10FN

Bulletin PD-20526 rev. E 03/03

4www.irf.com

Fig. 5 - Maximum Allowable Case Temperature

Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics

Fig. 7 - Maximum Non-Repetitive Surge Current

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR

120

125

130

135

140

145

150

012345678

A ll owable C ase Tempe rature - ( °C )

F(AV)

see note (2)

Square wave (D = 0.50)

80 % Rated V applied

Average Forward Curr ent - I (A)

0.5

1.5

2.5

3.5

4.5

5.5

012345678

A verage Pow e r Loss - (Watts)

F(AV)

RMS Limit

D = 0.20

D = 0.25

D = 0.33

D = 0.50

D = 0.75

Aver age Forward Current - I (A)

100

1000

10 100 1000 10000

FSM

Non-Repetitive Surge Current - I (A)

At Any Rated Load Condi ti on

And With Rated V Applied

Follow in g S urge

RRM

Square Wave Pulse Duration - t (microsec)

50WQ10FN

Bulletin PD-20526 rev. E 03/03

www.irf.com

Tape & Reel Information

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

12.1 (0.48)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

11.9 (0.47)

1.85 (0.07)

TO-252AA Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 2,000 pieces per reel for TR and

multiples of 3,000 pieces per reel

for both TRL and TRR.

13 (0.52) DIA.

DIA. MAX.

375 (14.17) 50 (1.97) DIA.

22.4 (0.88)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

6.8 (0.26)

7.0 (0.28)

TRR

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

TRL

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

Marking Information

EXAMPLE: THIS IS AN 50WQ10FN

5K3A

50WQ10FN

712A

INTERNATIONAL

RECTIFIER LOGO PART NUMBER

ASSEMBLY

LOT CODE

4 (K)

1 (A) 3 (A)

2 (K)

DATE CODE (YWWA)

Y = YEAR

WW = WEEK

A = LINE

50WQ10FN

Bulletin PD-20526 rev. E 03/03

6www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 03/03

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.