TECH. CORP.
SPECIFICATIONS
CUSTOMER :
SAMPLE CODE : SH480272T-006-I13Q
MASS PRODUCTION CODE :PH480272T-006-I13Q
SAMPLE VERSION :01
SPECIFICATIONS EDITION :002
DRAWING NO. (Ver.) :LMD-PH480272T-006-I13Q (Ver.002)
PACKAGING NO. (Ver.) :
Customer Approved
Date:
Approved Checked Designer
廖志豪
Rex Liao 張慶源
Yuan Chang 陳宗淇
Howard Chen
■ Preliminary specification for design input
□ Specification for sample approval
POWERTIP TECH. CORP.
Headquarters: No.8, 6th Road, Taichung Industrial Park,
Taichung, Taiwan
台中市 407 工業區六路 8號
TEL: 886-4-2355-8168
FAX: 886-4-2355-8166
E-mail: sales@powertip.com.tw
Http://www.powertip.com.tw
NO.PT-A-005-8
POWERTIP
TW RD APR
2012.09.03
PH480272T-006-I13Q Page2 SAMPLE Ver.01
SPEC Edi.002
History of Version
Date
(mm / dd / yyyy) Ver. Edi. Description Page Design by
08/30/2012 01 001 New Drawing. - Howard
08/31/2012 01 002 Second Drawing.
Modify the thickness Appendix Howard
Total: 27 Pages
PH480272T-006-I13Q Page3 SAMPLE Ver.01
SPEC Edi.002
Contents
1. SPECIFICATIONS
1.1 Features
1.2 Mechanical Specifications
1.3 Absolute Maximum Ratings
1.4 DC Electrical Characteristics
1.5 Optical Characteristics
1.6 Backlight Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
3.2 Inspection Specification
4. RELIABILITY TEST
4.1 Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix：LCM Drawing
Note : For detailed information please refer to IC data sheet :
Primacy(TFT LCD): ORISETECH: OTA5180A
(Or compatible IC )
PH480272T-006-I13Q Page4 SAMPLE Ver.01
SPEC Edi.002
1. SPECIFICATIONS
1.1 Features
Item Standard Value
Display Type 480 * 3 (RGB) * 272 Dots
LCD Type a-Si TFT , Normally white, Transmissive type
Screen size(inch) 4.3 inch
Viewing Direction 6 O’clock
Color configuration RGB-Strip
Backlight Type LED B/L
Interface Digital 24-bits RGB
Other(controller/driver IC) OTA5180A
(Or Compatible IC )
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news.php?area_id_view=1085560481/
1.2 Mechanical Specifications
Item Standard Value Unit
Outline Dimension 105.5(W) x 67.2 (L) x 4.0(H)MAX mm
LCD panel
Item Standard Value Unit
Active Area 95.04 (W) x 53.856 (L) mm
Note : For detailed information please refer to LCM drawing
PH480272T-006-I13Q Page5 SAMPLE Ver.01
SPEC Edi.002
1.3 Absolute Maximum Ratings
Module
Item Symbol Condition Min. Max. Unit
System Power Supply Voltage VDDIO GND=0 -0.3 4.5 V
Operating Temperature TOP - -20 70 °C
Storage Temperature TST - -30 80 °C
1.4 DC Electrical Characteristics
Module GND = 0V, Ta = 25°C
Item Symbol Condition Min. Typ. Max. Unit
Power Supply Voltage VDDIO - 3.0 3.3 3.6 V
VIH - 0.7VDDIO - VDDIO V
Input H/L Level Voltage
VIL - 0 - 0.3VDDIO V
VOH - VDDIO-0.4 - VDDIO V
Output H/L Level
Voltage VOL - 0 - GND+0.4 V
Supply Current IDD VDDIO = 3.3 V
Pattern=TBD *1 - TBD TBD
mA
Note1:Maximum current display
PH480272T-006-I13Q Page6 SAMPLE Ver.01
SPEC Edi.002
1.5 Optical Characteristics
TFT LCD Module VDDIO= 3.3 V, Ta=25°C
Item Symbol Condition Min. Typ. Max. unit -
Response time Tr+Tf 25℃ - - 30 45 ms -
Top θY+ 45 55 -
Bottom θY- 45 55 -
Left θX- 55 65 -
Viewing angle
Right θX+
CR ≥ 10
55 65 -
Deg. Note 4
Contrast ratio CR 250 350 - - Note 3
X - TBD -
White Y - TBD -
X - TBD -
Red Y - TBD -
X - TBD -
Green Y - TBD -
X - TBD -
Color of CIE
Coordinate
（With B/L）
Blue Y
Ta = 25°C
θX , θY = 0°
- TBD -
- Note1
Average Brightness
Pattern=white display
(With LCD)*1
IV IF= (20)mA TBD TBD - cd/m2 Note1
Uniformity
(With LCD)*2 B△ IF= (20)mA (70) - - % Note1
PH480272T-006-I13Q Page7 SAMPLE Ver.01
SPEC Edi.002
Note 1:
*1：△B=B(min) / B(max) * 100%
*2：Measurement Condition for Optical Characteristics:
a：Environment: 25 ±℃5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp
current and typical operating frequency.
b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°)
c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation.
d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4%
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
Normally White
1 2 3
6 5 4
7
8
9
VIEW AREA
LCM
θθ
Colorimeter=BM-7 fast
500 ㎜
100%
90%
10%
0%
Signal (Relative value)
"Black"
Tr Tf
"White" "White"
PH480272T-006-I13Q Page8 SAMPLE Ver.01
SPEC Edi.002
Normally Black
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
θ X - = 90 °
θ Y - = 90 °
X -
Y -
θ Y + = 90 °
θ X + = 90 °
X +
θ Y - θ Y +
θ X - θ X +
Y +
θ X = θ Y = 0°
Φ
Φ = 0 °
6 H
Φ = 270 °
Φ = 9 0 °
Φ = 180 °
12H
100%
90%
10%
0%
Signal (Relative value)
"Black"
Tr Tf
"White""Black"
PH480272T-006-I13Q Page9 SAMPLE Ver.01
SPEC Edi.002
1.6 Backlight Characteristics
Maximum Ratings
Item Symbol Conditions Min. Max. Unit
LED Forward Current IF Ta = 25 ℃ - 30 mA
LED Reverse Voltage VR Ta = 25 ℃ - 1 V
Power Dissipation PD Ta =2 5℃ - 360 mW
Electrical / Optical Characteristics
Item Symbol Conditions Min. Typ. Max. Unit
Forward Voltage VF - (22.8) - V
Average Brightness
(Without LCD &T/P) IV - (5900) - cd/m2
X (0.285) (0.315) (0.345)
CIE Color Coordinate
(Without LCD &T/P) Y
IF=(20)mA
(0.285) (0.315) (0.345)
-
Color White
PH480272T-006-I13Q Page10 SAMPLE Ver.01
SPEC Edi.002
2. MODULE STRUCTURE
2.1 Counter Drawing
2.1.1 LCM Mechanical Diagram
* See Appendix
2.1.2 Block Diagram
PH480272T-006-I13Q Page11 SAMPLE Ver.01
SPEC Edi.002
2.2 Interface Pin Description
Pin No. Symbol Function
1 K Power supply for LED Backlight cathode input
2 A Power supply for LED Backlight anode input
3 CSB Chip select pin of serial interface.
4 VDDIO Digital power
5 R0 Red data bit 0
6 R1 Red data bit 1
7 R2 Red data bit 2
8 R3 Red data bit 3
9 R4 Red data bit 4
10 R5 Red data bit 5
11 R6 Red data bit 6
12 R7 Red data bit 7
13 G0 Green data bit 0
14 G1 Green data bit 1
15 G2 Green data bit 2
16 G3 Green data bit 3
17 G4 Green data bit 4
18 G5 Green data bit 5
19 G6 Green data bit 6
20 G7 Green data bit 7
PH480272T-006-I13Q Page12 SAMPLE Ver.01
SPEC Edi.002
Pin No. Symbol Function
21 B0 Blue data bit 0
22 B1 Blue data bit 1
23 B2 Blue data bit 2
24 B3 Blue data bit 3
25 B4 Blue data bit 4
26 B5 Blue data bit 5
27 B6 Blue data bit 6
28 B7 Blue data bit 7
29 GND Ground
30 CLK Dot data clock
31 RESETB Active low global reset signal input.
32 HSYNC Horizontal sync input
33 VSYNC Vertical sync input
34 SDI Data input pin in serial interface.
35 SCL Clock input pin in serial interface.
36 GND Ground
37 XR N.C
38 YD N.C
39 XL N.C
40 YU N.C
PH480272T-006-I13Q Page13 SAMPLE Ver.01
SPEC Edi.002
2.3 Timing Characteristics
2.3.1 Parallel RGB Input Timing Table
PH480272T-006-I13Q Page14 SAMPLE Ver.01
SPEC Edi.002
2.3.2 3-Wire Communication Timing Table
PH480272T-006-I13Q Page15 SAMPLE Ver.01
SPEC Edi.002
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item Customer Sales R&D Q.A Manufactu
ring
Product
control Purchase Inventory
control
Marketing
&
Design
Sample
Approval
Pilot
Run
&
Mass
Product
Ship
Out
OK
Request
Info Survey
Inquiry Project evaluation
Project Validatio
n
Quote OK
NG
Contract
Design chec
k
Sample test
Verificatio
n
Sam
p
le a
pp
roval
NG
NG
Pilot run & Relia
ilit
test
Verificatio
n
S
p
ecification
p
re
p
aration
OK
Mass
p
roduction
Ins
p
ection NG
OK
Shi
p
ment
NG
Shi
p
out
OK
PH480272T-006-I13Q Page16 SAMPLE Ver.01
SPEC Edi.002
Item Customer Sales R&D Q.A Manufact
uring
Product
control Purchase Inventory
control
Sales
Service
Q.A
Activity
1. ISO 9001 Maintenance Activities 2. Process improvement proposal
3. Equipment calibration 4. Education And Training Activities
5. Standardization Management
Info Clai
m
Failure anal
y
sis
Corrective action
Trackin
g
Anal
y
sis re
p
ort
PH480272T-006-I13Q Page17 SAMPLE Ver.01
SPEC Edi.002
3.2 Inspection Specification
PH480272T-006-I13Q Page18 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page19 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page20 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page21 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page22 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page23 SAMPLE Ver.01
SPEC Edi.002
PH480272T-006-I13Q Page24 SAMPLE Ver.01
SPEC Edi.002
4. RELIABILITY TEST
4.1 Reliability Test Condition (Ver.B01)
NO. TEST ITEM TEST CONDITION
1 High Temperature
Storage Test Keep in +80 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
2 Low Temperature
Storage Test Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
3 High Temp erature /
High Humidity
Storage Test
Keep in +60 ℃ / 90% R.H duration for 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
(Excluding the polarizer)
4 Temperature Cycling
Storage Test
-30℃ → +25℃ → +80℃ → +25℃
(30mins) (5mins) (30mins) (5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs.
Air Discharge:
Apply 2 KV with 5 times
Discharge for each polarity +/-
Contact Discharge:
Apply 250 V with 5 times
discharge for each polarity +/-
5 ESD Test
1. Temperature ambiance : 15℃∼35℃
2. Humidity relative : 30%∼60%
3. Energy Storage Capacitance(Cs+Cd) : 150pF±10%
4. Discharge Resistance(Rd) : 330Ω±10%
5. Discharge, mode of operation :
Sin
g
le Dischar
g
e (time between successive dischar
g
es at least 1 sec)
(Tolerance if the output voltage indication : ±5%)
6 V ibration Test
(Packaged)
1. Sine wave 10∼55 Hz frequency (1 min/sweep)
2. The amplitude of vibration :1.5 mm
3. Each direction (X、Y、Z) duration for 2 Hrs
7 Drop Test
(Packaged)
Drop Direction :※1 corner / 3 edges / 6 sides each 1time
Packing Weight (Kg) Drop Height (cm)
0 ~ 45.4 122
45.4 ~ 90.8 76
90.8 ~ 454 61
Over 454 46
PH480272T-006-I13Q Page25 SAMPLE Ver.01
SPEC Edi.002
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1 Avoid any strong mechanical shock which can break the glass.
5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
5.2.3 Do not remove the panel or frame from the module.
5.2.4 The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
5.2.6 Do not touch the display area with bare hands , this will stain the display area.
5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
5.2.8 To control temperature and time of soldering is 320±10℃and 3-5 sec.
5.2.9 To avoid liquid (include organic solvent) stained on LCM .
5.3 STORAGE
5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃
and the humidity is below 65% RH.
5.3.2 Do not place the module near organics solvents or corrosive gases.
5.3.3 Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1 Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
5.4.2 Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.