OxygenTMHD CMI8787 High Performance PCI Audio Processor Data Sheet v0.5 2005/12/13 C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 NOTICES THIS DOCUMENT IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, DOCUMENT OR SAMPLE. ALL RIGHTS RESERVED. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING INFORMATION STORAGE AND RETRIEVAL SYSTEMS, WITHOUT PERMISSION IN WRITING FROM THE C-MEDIA ELECTRONICS, INC. Third-party brands and names are the property of their respective owners. Copyright 2004-2005 (c) C-Media Electronics Inc. C-Media Electronics, Inc. 6F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C. TEL: 886-2-8773-1100 FAX: 886-2-8773-2211 http://www.cmedia.com.tw For detailed product information, please contact sales@cmedia.com.tw 1 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 Contents 0. 1. Revision History......................................................................................... 4 Features and software description ...................................................... 5 1.1 1.2 1.3 2. 3. Block Diagram............................................................................................ 8 Pin Assignment ........................................................................................... 9 3.1 3.2 4. Pinout Diagram .................................................................................. 9 Pin Description................................................................................... 10 Electrical Characteristics ....................................................................... 15 4.1 4.2 4.3 4.4 4.5 5. Hardware Features ............................................................................. 5 General Description ........................................................................... 6 Application......................................................................................... 7 Maximum Ratings.............................................................................. 15 Recommended Operation Conditions ................................................ 15 Power consumption............................................................................ 15 DC Characteristics ............................................................................. 16 EEPROM AC Timing Characteristics................................................ 16 4.5.1 I2 S SIGNAL TIMING.................................................................. 16 4.5.2 CONTROL INTERFACE TIMING - 3 - WIRE MODE............. 16 4.5.3 CONTROL INTERFACE TIMING - 2 - WIRE MODE............. 19 4.5.4 EEPROM INTERFACE TIMING ............................................... 20 4.5.5 EEPROM AC Timing Characteristics ......................................... 21 4.5.6 AC-LINK TIMING CHARACTERISTICS ................................ 22 Mechanical Specifications ...................................................................... 26 5.1 Package Dimension............................................................................ 26 2 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 List of Figures Figure 1. Block Diagram of OxygenT MHD CMI8787 ...................................................... 8 Figure 2. Pinout Diagram of OxygenT MHD CMI8787 ..................................................... 9 3 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 0. Revision History Date Rev. Release Note 2005/03/15 0.1 Preliminary vision 2005/12/13 0.5 Edit for readability 4 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 1. Features and General Description 1.1 Hardware Features n n n n n n n n n n n n n n n n n n n n n n PCI 2.2 interface with bus mastering and burst modes Only one 24.576MHz oscillator is needed 4 synchronous I2 S output data stream pairs within 1 flexible output DMA Programmable channel routing mechanism among the 4 I2 S output pairs 4 synchronous I2 S input data stream pairs spread in 3 input DMA's (for Dolby pro-audio applications) Optionally, a multi-channel AC- link can support 2 AC97 codecs Programmable HW monitoring routing from I2 S inputs to outputs All I2 S I/O pairs support 32-bit PCM data transfer and adjustable sample rate (up to 192KHz) Integrated 192k/24-bit S/PDIF transmitter with 1 dedicated S/PDIF OUT DMA Integrated 192k/24-bit S/PDIF receiver in recording DMA S/PDIF IN supports digital loopback path for switching between optical and RCA connections 48k/16-bit front panel DMA for AC97 codec 2-wire master serial bus or 4-wire SPI (Serial Peripheral Interface) bus to control I2 S codecs 2-wire slave serial bus to communicate with microcontroller unit (MCU) Interrupt pin to inform external MCU to retrieve the data from the system driver One MPU-401 MIDI UART port EEPROM control interface 6 GPI phone jack detection pins Advanced device-sensing technology indicates whether a speaker or a headphone is plugged in the jack 9 direct-access GPIO pins 3 bonding-option bits for 8 identification possibilites 128-pin LQFP thin high-quality package 5 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 1.2 General Description The CMI8787 is a high quality PCI 32-bit multi-channel audio processor that can be built into home audio electronics or personal computers to provide high fidelity sound playback and processing. It supports up to 12 output channels and 8 input channels. The 12 output channels are composed of 3 playback DMA's, which are multi-channel DMA (32 bits, 8 channels, 192k), S/PDIF DMA (32 bits, 2 channels, 192k), and front panel DMA (16 bits, 2 channels, 48k). The 8 input channels are spread across 3 recording DMA's (32 bits, 192k) - recording A, B, and C DMA's. The architecture of recording is a unique point of CMI8787 that enables very flexible recording options for the user. The details of the recording mode selection will be explained in the later sections. The CMI8787 is compatible with all the popular codecs, from I2 S codecs with over 120dB quality to the usual AC97 codecs. This ability gives customers the flexibility to design their products exactly the way they want them. The I2 S, AC-Link, 2-wire master bus, and SPI interfaces are used to transfer audio data and control data between the CMI8787 and codecs. To facilitate the connection with existing home audio electronics, the CMI8787 has incorporated the S/PDIF transmitter and receiver with 192k sampling rate. An EEPROM interface is built for the CMI8787 in connection with the EEPROM to store and retrieve the non-evaporable data for customer applications, such as board configuration, sub- vendor and sub-system IDs of the PCI configuration, or any dynamic data that customers want to restore at the next power-on. The CMI8787 has an independent 2-wire slave bus to communicate with the micro control unit (MCU). This interface is used as a medium for the system driver and the MCU to exchange data. One of the applications of the 2-wire slave bus is to transmit the control data from the remote controller to the system driver. The MPU-401 MIDI UART is also integrated in the CMI8787. There are six GPI phone jack detect pins in CMI8787, which can be used to distinguish if a cable is plugged in the phone jack. The re are 9 GPIO pins on the chip, however some of them are shared with other functions. The C-Media's unique device sensing technology is implemented in CMI8787, which can indicate whether a speaker or a headphone is plugged in the jack. Then according to this information, the system driver can decide to turn on the C-Media's X-ear 3D audio technology if appropriate. 6 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 1.3 Applications n n n n n n n n Pro-sumer high-quality PCI sound card for retailer market Consume r sound card powered by Dolby(R) and DTS (R) technologies PC-based media center Professional PC musician application High-end motherboard requiring top audio quality Audio up-sell for PC systems Bundle selling with high-profile VGA cards General purpose multi- channel I/O 7 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 2. Block Diagram Figure 1. Block Diagram of OxygenTMHD CMI8787 8 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 3. Pin Assignment 3.1 Pinout Diagram Figure 2. Pinout Diagram of OxygenTMHD CMI8787 9 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 3.2 Pin Descriptions The following table gives the pin descriptions for the OxygenT MHD CMI8787. Some of the pins perform multiple functions, so for the sake of consistency, a pin may be listed more than once in the table. The abbreviations used in the pin description table are explained below. DI: digital input signal DO: digital output signal DIO: digital bidirectional signal AI: analog input PU: pull- up with 75K resistor PD: pull-down with 75K resistor #: low active signal Table 3.1 Pin description table of OxygenTMHD CMI8787 Symbol Pin No. Type PCI Bus Interface Description XRST 119 DI PCI Bus Reset. XCLK33 120 DI PCI Bus clock, 33MHz. XIDSEL 5 DI PCI Initialization Device Select. This is the chip select during PCI configuration access. XGNT# 121 DI PCI Bus Grant. When active, PCI bus master is granted to CMI8787. 122 DIO PCI Bus Master Request. When active, the CMI8787 is requesting to become a bus master. XAD[31:0] 1-3, 7-11, 13-15, 25, 27, 28-31, 33, 35-38, 40-44, 123-126, 128 DIO PCI Address / Data Bus XCB#[3:0] 4, 16, 24, 34 DIO PCI Bus Command / Byte Enable XFRAME# 17 DIO XDEVSEL# 21 DIO XIRDY# 18 DIO XTRDY# 20 DIO PCI Cycle Frame. It is driven by the current master to indicate the beginning and duration of an access PCI Device Select. When active, indicates that the driving device has decoded its address as the target of the current access. PCI Initiator Ready. When active, indicates that the initiator can complete the current data phase of the transaction. PCI Target Ready. When active, indicates the target device can complete the current data phase of the transaction. XREQ# 10 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 XSTOP# 22 DIO PCI Stop. When active, indicates that the target is requesting that the master stop the current transaction. XPAR 23 DIO PCI Parity. It is even parity across XAD[31:0] and XCB#[3:0]. XINTA# 118 DIO PCI Interrupt Request A. MPU-401 MIDI UART Interface XTXD 54 XRXD 55 DIO, PU MP-401 MIDI transmitter (output). It is also used as XGPIO5~8 and I2S ADC 3 configuration (input, 0: GPIO5~8, 1: I2S ADC 3) at the rising edge of XRST. DI, PU MPU401 MIDI receiver. I2S Interface XDAC_MCLK 82 DO I2S DAC master clock output. XDAC_LRCK 83 DIO I2S DAC Left/Right sample clock. XDAC_BCLK 84 DIO I2S DAC bit clock. XDAC_SDOUT0 85 DO I2S DAC channel 0,channel 1 serial data output. XDAC_SDOUT1 86 DO I2S DAC channel 2,channel 3 serial data output. XDAC_SDOUT2 87 DO I2S DAC channel 4,channel 5 serial data output. XDAC_SDOUT3 88 DO I2S DAC channel 6,channel 7 serial data output. XADC1_MCLK 90 DO I2S ADC 1 and I2S ADC 4 master clock output. XADC1_LRCK 91 DIO I2S ADC 1 Left/Right sample clock. XADC1_BCLK 92 DIO I2S ADC 1 bit clock. XADC1_SDIN XAC97_SDI1/ 93 DI, PU I2S ADC 1 serial data input. 58 DI, PD I2S ADC 1 serial data input 1. This pin is shared with AC97 serial data input 1, and determined by XSPI_DOUT/XA1 input configuration at the rising edge of XRST. XADC1_SDIN1 XADC2_MCLK 94 DO I2S ADC 2 master clock output. XADC2_LRCK 95 DIO I2S ADC 2 Left/Right sample clock. XADC2_BCLK 96 DIO I2S ADC 2 bit clock. XADC2_SDIN 97 XGPIO5/ XADC3_MCLK 98 XGPIO6/ XADC3_BCLK 99 XGPIO7/ XADC3_LRCK 100 XGPIO8/ XADC3_SDIN 101 DI, PU I2S ADC 2 serial data input. DIO, PD I2S ADC 3 master clock output. This pin is shared with XGPIO5, which is determined by XTXD input configuration at the rising edge of XRST. DIO, PD I2S ADC 3 bit clock. This pin is shared with XGPIO6, which is determined by XTXD input configuration at the rising edge of XRST. DIO, PD I2S ADC 2 Left/Right sample clock. This pin is shared with XGPIO7, which is determined by XTXD input configuration at the rising edge of XRST. DIO, PD GPIO8, default input. This pin is shared with XADC3_SDIN, which determined by XTXD input configuration at the rising edge of XRST. AC-Link Interface 11 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 XAC97_BCLK 63 DI, PU AC97 serial clock input8 XAC97_SDI0 62 DI, PD AC97 serial data input 0 XAC97_SDI1/ XADC1_SDIN1 58 DI, PD AC97 serial data input 1. This pin is shared with XADC1_SDIN1, and determined by XSPI_DOUT/XA1 input configuration at the rising edge of XRST. XAC97_SYNC 61 DO AC97 frame synchronization. XAC97_SDO0 64 DO AC97 serial data output 0. XAC97_SDO1 59 DO AC97 serial data output 1. XAC97_RST0 60 DO AC97 codec reset 0. XAC97_RST1 57 DO AC97 codec reset 1. XAC97_MCLK 65 DO AC97 master clock 24.5760M for AC97 codec. Serial Port Interface XSPI_DIN/ XMSDA 73 DIO, PU SPI data input. This pin is shared with 2-wire master serial data. XSPI_CLK/ XMSCL 74 DIO, PU SPI clock output. This pin is shared with 2-wire master serial clock. XSPI_DOUT/ XA1 75 XSPI_CEN0/ XA0 77 XSPI_CEN1/ XCID0 78 XSPI_CEN2/ XCID1 79 DIO, PU SPI data output. This pin is shared with 2-wire Codec address A1. It is also used as XAC97_SDI1 and XADC1_SDIN1 configuration at the rising edge of XRST (input, 1: XAC97_SDI1, 0: XADC1_SDIN1). DIO, PU SPI chip enable, which select the codec #0 to be controlled. It is shared with I2C Codec address A0. It is also used as XGPIO3~4 and SSCL/SSDA configuration (input, 1: GPIO3~4, 0: SSCL/SSDA) at the rising edge of XRST. DIO, PU SPI chip enable, which select the codec #1 to be controlled (output). It is shared with codec ID 0 configuration (input) at the rising edge of XRST. DIO, PU SPI chip enable, which select the codec #2 to be controlled (output). It is shared with codec ID 1 configuration (input) at the rising edge of XRST. XSPI_CEN3/ XCID2 80 XSPI_CEN4/ XEESK XSPI_CEN5/ XEEDO 68 69 DIO, PU SPI chip enable, which select the codec #3 to be controlled (output). It is shared with codec ID 2 configuration (input) at the rising edge of XRST. SPI chip enable, which select the codec #4 to be controlled. It is DO shared with EEPROM serial clock. SPI chip enable, which select the codec #5 to be controlled. It is DO shared with EEPROM serial data out. 2-Wire Master Serial Bus XMSDA/ XSPI_DIN XMSCL/ XSPI_CLK XA1/ XSPI_DOUT 73 DIO, PU 2-wire serial bus data. This pin is shared with SPI data input. 74 DIO, PU 2-wire serial bus clock. This pin is shared with SPI clock output. 75 DIO, PU 2-wire serial bus codec address A1. This pin is shared with SPI data output. It is also used as XAC97_SDI1 and XADC1_SDIN1 configuration at the rising edge of XRST (input, 1: XAC97_SDI1, 12 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 XA0/ XSPI_CEN0 77 0: XADC1_SDIN1). DIO, PU 2-wire serial bus codec address A0. This pin is shared with SPI chip enable, which select the codec #0 to be controlled. It is also used as XGPIO3~4 and SSCL/SSDA configuration (input, 1: GPIO3~4, 0: SSCL/SSDA) at the rising edge of XRST. 2-Wire Slave Serial Bus XSSCL/ XGPIO3 XSSDA/ XGPIO4 XMCU_INT 52 DIO, PU 2-wire serial bus clock. This pin is shared with XGPIO3. 53 DIO, PU 2-wire serial bus data. This pin is shared with XGPIO4. XSLAVE_RDY/ XGPIO1 50 72 DO Interrupt output for external Micro Control Unit (MCU). DIO, PD 2-wire serial bus data ready. This pin is shared with XGPIO1. S/PDIF Interface XSPDIFI 107 DI S/PDIF receiver. XSPDIFO 116 DO S/PDIF transmitter. EEPROM Interface XEECS 67 XEESK/ XSPI_CEN4 68 XEEDI 66 XEEDO/ XSPI_CEN5 69 DIO, PD EEPROM chip enable (output). It is also used as power on EEPROM CS delay configuration (input, 0: no delay, 1: delay 1 clock) at the rising edge of XRST EEPROM serial clock. This pin is shared with SPI chip enable, DO which select the codec #4 to be controlled DI, PU EEPROM serial data in DO EEPROM serial data out. This pin is shared with SPI chip enable, which select the codec #5 to be controlled Jack Detect GPI Interface XGPI0 108 DI, PD JACK A detection input XGPI1 109 DI, PD JACK B detection input XGPI2 110 DI, PD JACK C detection input XGPI3 111 DI, PD JACK D detection input XGPI4 112 DI, PD JACK E detection input XGPI5 113 DI, PD JACK F detection input GPIO Interface XGPIO0 49 DIO, PD GPIO0, default output Low. XGPIO1/ XSLAVE_RDY 50 DIO, PD GPIO1, default output Low. This pin is shared with I2C Slave data ready. XGPIO2 51 DIO, PD GPIO2, default input. XGPIO3/XSSCL 52 DIO, PU GPIO3, default output Low. This pin is shared with I2C Slave serial clock. XGPIO4/XSSDA 53 DIO, PU GPIO4, default input. This pin is shared with I2C Slave serial data XGPIO5/ XADC3_MCLK 98 DIO, PD GPIO5, default output Low. This pin is shared with XADC3_MCLK, which determined by XTXD input configuration 13 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 XGPIO6/ XADC3_BCLK 99 XGPIO7/ XADC3_LRCK 100 XGPIO8/ XADC3_SDIN 101 at the rising edge of XRST. DIO, PD GPIO6, default input. This pin is shared with XADC3_BCLK, which determined by XTXD input configuration at the rising edge of XRST. DIO, PD GPIO7, default output Low. This pin is shared with XADC3_LRCK, which determined by XTXD input configuration at the rising edge of XRST. DIO, PD GPIO8, default input. This pin is shared with XADC3_SDIN, which determined by XTXD input configuration at the rising edge of XRST. Headphone Sensing Interface XHPD_E/ DIO, PD Head phone detect enable. This pin is shared with test mode selection at the rising edge of XRST 103 XTEST XHPD_IN 104 AI Head phone voltage input XHPD_R1 105 AI Head phone reference resistor 1 XHPD_R2 106 AI Head phone reference resistor 2 Miscellaneous XTAL1 46 DI 24.576Mhz OSC input XTAL2 47 DO OSC output XRSTO 71 DO External Codec reset, can be programmed as Active Low or High with Register 0x50-bit 2 XPWDN 115 DO Power Down output pin, Active Low, default High DVDD 6, 19, 32, 45, 56, 76, 89, 117 3.3V power input DGND 12, 26, 39, 48, 70, 81, 102, 114 Ground 14 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4. Electrical Characteristics 4.1 Maximum Ratings Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C Parameter Symbol Min Typ Max - -55 - 150 o o Storge temperature Units C Operating ambient temperature - 0 25 75 C DC supply voltage - 3.0 3.3 3.6 V I/O pin voltage - GND - VDD V Power dissipation - - 0.15 - W 4.2 Recommended Operation Conditions Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C Parameter Symbol Min Typ Max Units Input voltage range - VDD-0.3 VDD VDD+0.3 V Output voltage range - 0 - VDD V 4.3 Power consumption Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C Parameter Symbol Min Typ Max Units Supply current : power up - - 40 - mA Supply current : power down - - 10 - uA 15 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.4 DC Characteristics Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C Parameter Symbol Min Typ Max Units Input voltage range Vin VDD-0.3 VDD VDD+0.3 V Output voltage range Vout 0 - VDD V High level input voltage Vih 0.7VDD - - V Low level input voltage Vil - - 0.3VDD V High level output voitage Voh 2.4 - - V Low level output voltage Vol - 0.4 V Input leakage current Iil -10 - 10 uA Output leakage current Iol -10 - 10 uA Output buffer driver current - - 8 - mA SPDIF transmit output driver current - - 8 - mA 4.5 AC Timing Characteristics 4.5.1 I2S SIGNAL TIMING 1. SYSTEM CLOCK TIMING System Clock Timing Diagram Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C,fs=96KHz,MCLK=512fs,24 bit data,unless otherwise stated System Clock Timing Parameters 16 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 Parameter Symbol Min Typ Max Units MCLK clock cycle time tmclk 20 - - ns MCLK pulse width high tmclkh 10 - - ns MCLK pulse width high tmclkl 10 - - ns 40 50 60 % MCLK duty cycle 2. AUDIO INTERFACE TIMING Audio Interface Timing Diagram Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C,fs=96KHz,MCLK=512fs,24 bit data,unless otherwise stated Audio Interface Timing Parameters Parameter LRCK propagation delay from BCLK falling Symbol Min Typ Max Units Tdl 5 - - ns Tdd 5 - - ns edge SDOUT propagation delay from BCLK falling edge 17 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.5.2 CONTROL INTERFACE TIMING - 3 - WIRE MODE Control Interface Timing -3- Wire Diagram Note: latch data at XSPI_CEN clock low mode , XSPI_CEN clock can be low or high mode Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C,SPI clock 160 ns,unless otherwise stated Control Interface Timing -3- Wire Parameters Parameter Symbol Min Typ Max Units Tscs 120 - - ns XSPI_CLK pulse cycle time Tscy 160 - - ns XSPI_CLK pulse width low Tscl 80 - - ns XSPI_CLK pulse width high Tsch 80 - - ns XSPI_DOUT to XSPI_CLK set-up time Tdsu 40 - - ns XSPI_DOUT to XSPI_CLK hold time Tdho 40 - - ns XSPI_CEN rising to SCLK rising Tcss 40 - - ns XSPI_CLK rising edge to XSPI_CEN rising edge 18 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.5.3 CONTROL INTERFACE TIMING - 2 - WIRE MODE Control Interface Timing -2- Wire Diagram Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C,2 wire,Fast speed mode,unless otherwise stated Control Interface Timing -2- Wire Parameters Parameter Symbol XMSCL frequency Min Typ Max Units 400 - - KHz XMSCL pulse width low t1 650 - - ns XMSCL pulse width high t2 1.3 - - us Hold time (start condition) t3 650 - - ns Set-up time (start condition) t4 650 - - ns Data set-up time t5 650 - - ns XMSDI,XMSCL rise time t6 100 - - ns XMSDI,XMSCL fall time t7 100 - - ns Set-up time (stop condition) t8 650 - - ns Data hold time t9 650 - - ns Note: test parameters at 2 wire,Fast speed mode 19 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.5.4 EEPROM INTERFACE TIMING EEPROM Interface Timing Diagram Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C,unless otherwise stated EEPROM Interface Timing Parameters Parameter Symbol Min Typ Max Units XEESK clock frequency tsk 555 - - KHz XEESK high time tskh 900 - - ns XEESK low time tskl 900 - - ns XEECS setup time tcss 900 - - ns XEEDI setup time tdis 900 - - ns XEECS hold time tcsh 900 - - ns XEEDI hold time tdih 2 - - ns Output delay to "1" tpd1 900 - - ns Output delay to "0" tpd0 30 - - ns XEECS to status valid tsv 30 - - ns XEECS to XEEDO in high impedance tdf 30 - - ns 20 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.5.5 EEPROM AC Timing Characteristics Symbol fsk tskh tskl tcss tcsh tdis tdih tpd0 tpd1 tsv tdf Description SK Clock Frequency SK High Time SK Low Time CS Setup Time CS Hold Time DI Setup Time DI Hold Time Output Delay to "0" Output Delay to "1" CS to Status Valid CS to DO High Impedance Min 0 500 500 100 0 200 200 Max 0.5 500 500 500 200 21 C-MEDIA CONFIDENTIAL Units MHz ns ns ns ns ns ns ns ns ns ns C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 4.5.6 AC-LINK TIMING CHARACTERISTICS Test Conditions DVDD = 3.3V, DGND =0V,TA=+25o C ,unless otherwise stated 1. COLD RESET Cold Reset Timing Diagram Cold Reset Timing Parameters Parameter XAC97_RST active low pulse width XAC97_RST inactive to XAC97_BCLK startup Symbol Min Typ Max Units Trst_low 1.7 - - us Trst2clk 168 - - ns delay # denotes active low. 22 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 2. WARM RESET Warm Reset Diagram Warm Reset Parameters Parameter XAC97_SYNC active high pulse width XAC97_SYNC inactive to XAC97_BCLK startup Symbol Min Typ Max Units Tsync_high 1.2 - - us Tsync2clk 168 - - ns delay 3. AC-LINK CLOCKS BIT_CLK to SYNC Timing Diagram 23 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 BIT_CLK to SYNC Timing Parameters Parameter Symbol XAC97_BCLK frequency XAC97_BCLK period Tclk_period Min Typ Max Units 12.288 - - MHz 81.4 - - ns 750 - - ps XAC97_BCLK output jitter XAC97_BCLK high pulsewidth (note 1) Tclk_high 40.7 - - ns XAC97_BCLK low pulse width (note 1) Tclk_low 40.7 - - ns 48.0 - - kHz Tsync_period 20.8 - - us XAC97_SYNC high pulse width Tsync_high 1.3 - - us XAC97_SYNC low_pulse width Tsync_low 19.5 - - us XAC97_SYNC frequency XAC97_SYNC period Note: Worst case duty cycle restricted to 45/55. 4. DATA SETUP AND HOLD Data Setup and Hold diagram Data Setup and Hold Parameters Parameter Setup to falling edge of Hold from falling edge of XAC97_BCLK XAC97_BCLK Symbol Min Typ Max Units Tsetup 30 - - ns Thold 30 - - ns Note: Setup and hold time parameters for SDATA_IN are with respect to the AC `97 Controller. 24 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 5. SIGNAL RISING AND FALLING TIMES Signal Rising and Falling Times Diagram Signal Rising and Falling time Parameters Parameter Symbol Min Typ Max Units XAC97_BCLK rising time Triseclk 6 - - ns XAC97_BCLK falling time Tfallclk 6 - - ns XAC97_SYNC rising time Trisesync 6 - - ns XAC97_SYNC falling time Tfallsync 6 - - ns XAC97_SDI rising time Trisedin 6 - - ns XAC97_SDI falling time Tfalldin 6 - - ns XAC97_SDO rising time Trisedout 6 - - ns XAC97_SDO falling time Tfalldout 6 - - ns 25 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 5. Mechanical Specification 5.1 Package Dimension 26 C-MEDIA CONFIDENTIAL C-Media High Performance PCI Audi o Processor OxygenTM HD CMI8787 Datasheet v0.5 - End of Datasheet - C-Media Electronics, Inc. 6F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C. TEL: 886-2-8773-1100 FAX: 886-2-8773-2211 http://www.cmedia.com.tw For detailed product information, please contact sales@cmedia.com.tw 27 C-MEDIA CONFIDENTIAL