CMI8787 - C-Media Electronics, Inc.

OxygenTMHD CMI8787

High Performance

PCI Audio Processor

Data Sheet v0.5

2005/12/13

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

NOTICES

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES

WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY,

NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY

WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, DOCUMENT

OR SAMPLE.

REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS,

ELECTRONIC OR MECHANICAL, INCLUDING INFORMATION STORAGE

AND RETRIEVAL SYSTEMS, WITHOUT PERMISSION IN WRITING FROM

THE C-MEDIA ELECTRONICS, INC.

Third-party brands and names are the property of their respective owners.

C-Media Electronics, Inc.

6F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C.

TEL: 886-2-8773-1100 FAX: 886-2-8773-2211

http://www.cmedia.com.tw

For detailed product information, please contact sales@cmedia.com.tw

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

Contents

0. Revision History.........................................................................................4

1. Features and software description......................................................5

1.1 Hardware Features .............................................................................5

1.2 General Description...........................................................................6

1.3 Application.........................................................................................7

2. Block Diagram............................................................................................8

3. Pin Assignment...........................................................................................9

3.1 Pinout Diagram..................................................................................9

3.2 Pin Description...................................................................................10

4. Electrical Characteristics.......................................................................15

4.1 Maximum Ratings..............................................................................15

4.2 Recommended Operation Conditions ................................................15

4.3 Power consumption............................................................................15

4.4 DC Characteristics .............................................................................16

4.5 EEPROM AC Timing Characteristics................................................16

4.5.1 I2S SIGNAL TIMING..................................................................16

4.5.2 CONTROL INTERFACE TIMING - 3 - WIRE MODE.............16

4.5.3 CONTROL INTERFACE TIMING - 2 - WIRE MODE.............19

4.5.4 EEPROM INTERFACE TIMING...............................................20

4.5.5 EEPROM AC Timing Characteristics .........................................21

4.5.6 AC-LINK TIMING CHARACTERISTICS................................22

5. Mechanical Specifications......................................................................26

5.1 Package Dimension............................................................................26

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

List of Figures

Figure 1. Block Diagram of OxygenTMHD CMI8787...................................................... 8

Figure 2. Pinout Diagram of OxygenTMHD CMI8787..................................................... 9

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

0. Revision History

Date Rev. Release Note

2005/03/15 0.1 Preliminary vision

2005/12/13 0.5 Edit for readability

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

1. Features and General Description

1.1 Hardware Features

n PCI 2.2 interface with bus mastering and burst modes

n Only one 24.576MHz oscillator is needed

n 4 synchronous I2S output data stream pairs within 1 flexible output DMA

n Programmable channel routing mechanism among the 4 I2S output pairs

n 4 synchronous I2S input data stream pairs spread in 3 input DMA’s (for Dolby

pro-audio applications)

n Optionally, a mult i-channel AC-link can support 2 AC97 codecs

n Programmable HW monitoring routing from I2S inputs to outputs

n All I2S I/O pairs support 32-bit PCM data transfer and adjustable sample rate (up to

192KHz)

n Integrated 192k/24-bit S/PDIF transmitter with 1 dedicated S/PDIF OUT DMA

n Integrated 192k/24-bit S/PDIF receiver in recording DMA

n S/PDIF IN supports digital loopback path for switching between optical and RCA

connections

n 48k/16-bit front panel DMA for AC97 codec

n 2-wire master serial bus or 4-wire SPI (Serial Peripheral Interface) bus to control

I2S codecs

n 2-wire slave serial bus to communicate with microcontroller unit (MCU)

n Interrupt pin to inform external MCU to retrieve the data from the system driver

n One MPU-401 MIDI UART port

n EEPROM control interface

n 6 GPI phone jack detection pins

n Advanced device-sensing technology indicates whether a speaker or a headphone

is plugged in the jack

n 9 direct-access GPIO pins

n 3 bonding-option bits for 8 identification possibilites

n 128-pin LQFP thin high-quality package

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

1.2 General Description

The CMI8787 is a high quality PCI 32-bit multi-channel audio processor that can be

built into home audio electronics or personal computers to provide high fidelity sound

playback and processing. It supports up to 12 output channels and 8 input channels. The

12 output channels are composed of 3 playback DMA’s, which are multi-channel DMA

(32 bits, 8 channels, 192k), S/PDIF DMA (32 bits, 2 channels, 192k), and front panel

DMA (16 bits, 2 channels, 48k). The 8 input channels are spread across 3 recording

DMA’s (32 bits, 192k) - recording A, B, and C DMA’s. The architecture of recording is

a unique point of CMI8787 that enables very flexible recording options for the user. The

details of the recording mode selection will be explained in the later sections.

The CMI8787 is compatible with all the popular codecs, from I2S codecs with over

120dB quality to the usual AC97 codecs. This ability gives customers the flexibility to

design their products exactly the way they want them. The I2S, AC-Link, 2-wire master

bus, and SPI interfaces are used to transfer audio data and control data between the

CMI8787 and codecs. To facilitate the connection with existing home audio electronics,

the CMI8787 has incorporated the S/PDIF transmitter and receiver with 192k sampling

rate.

An EEPROM interface is built for the CMI8787 in connection with the EEPROM to

store and retrieve the non-evaporable data for customer applications, such as board

configuration, sub-vendor and sub-system IDs of the PCI configuration, or any dynamic

data that customers want to restore at the next power-on.

The CMI8787 has an independent 2-wire slave bus to communicate with the micro

control unit (MCU). This interface is used as a medium for the system driver and the

MCU to exchange data. One of the applications of the 2-wire slave bus is to transmit the

control data from the remote controller to the system driver. The MPU-401 MIDI UART

is also integrated in the CMI8787.

There are six GPI phone jack detect pins in CMI8787, which can be used to distinguish

if a cable is plugged in the phone jack. There are 9 GPIO pins on the chip, however

some of them are shared with other functions. The C-Media’s unique device sensing

technology is implemented in CMI8787, which can indicate whether a speaker or a

headphone is plugged in the jack. Then according to this information, the system driver

can decide to turn on the C-Media’s X-ear 3D audio technology if appropriate.

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

1.3 Applications

n Pro-sumer high-quality PCI sound card for retailer market

n Consumer sound card powered by Dolby® and DTS® technologies

n PC-based media center

n Professional PC musician application

n High-end motherboard requiring top audio quality

n Audio up -sell for PC systems

n Bundle selling with high-profile VGA cards

n General purpose multi-channel I/O

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

2. Block Diagram

Figure 1. Block Diagram of OxygenTMHD CMI8787

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

3. Pin Assignment

3.1 Pinout Diagram

Figure 2. Pinout Diagram of OxygenTMHD CMI8787

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

3.2 Pin Descriptions

The following table gives the pin descriptions for the OxygenTMHD CMI8787.

Some of the pins perform multiple functions, so for the sake of consistency, a pin may

be listed more than once in the table. The abbreviations used in the pin description table

are explained below.

DI: digital input signal

DO: digital output signal

DIO: digital bidirectional signal

AI: analog input

PU: pull-up with 75KΩ resistor

PD: pull-down with 75KΩ resistor

#: low active signal

Table 3.1 Pin description table of OxygenTMHD CMI8787

Symbol Pin No. Type

Description

PCI Bus Interface

XRST 119 DI PCI Bus Reset.

XCLK33 120 DI PCI Bus clock, 33MHz.

XIDSEL 5 DI PCI Initialization Device Select. This is the chip select during PCI

configuration access.

XGNT# 121 DI PCI Bus Grant. When active, PCI bus master is granted to

CMI8787.

XREQ# 122 DIO PCI Bus Master Request. When active, the CMI8787 is requesting

to become a bus master.

XAD[31:0] 1-3, 7-11,

13-15, 25, 27,

28-31, 33,

35-38, 40-44,

123-126, 128

DIO PCI Address / Data Bus

XCB#[3:0] 4, 16, 24, 34

DIO PCI Bus Command / Byte Enable

XFRAME# 17 DIO PCI Cycle Frame. It is driven by the current master to indicate the

beginning and duration of an access

XDEVSEL# 21 DIO PCI Device Select. When active, indicates that the driving device

has decoded its address as the target of the current access.

XIRDY# 18 DIO PCI Initiator Ready. When active, indicates that the initiator can

complete the current data phase of the transaction.

XTRDY# 20 DIO PCI Target Ready. When active, indicates the target device can

complete the current data phase of the transaction.

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

XSTOP# 22 DIO PCI Stop. When active, indicates that the target is requesting that

the master stop the current transaction.

XPAR 23 DIO PCI Parity. It is even parity across XAD[31:0] and XCB#[3:0].

XINTA# 118 DIO PCI Interrupt Request A.

MPU-401 MIDI UART Interface

XTXD 54 DIO, PU

MP-401 MIDI transmitter (output). It is also used as XGPIO5~8

and I2S ADC 3 configuration (input, 0: GPIO5~8, 1: I2S ADC 3)

at the rising edge of XRST.

XRXD 55 DI, PU

MPU401 MIDI receiver.

I2S Interface

XDAC_MCLK 82 DO I2S DAC master clock output.

XDAC_LRCK 83 DIO I2S DAC Left/Right sample clock.

XDAC_BCLK 84 DIO I2S DAC bit clock.

XDAC_SDOUT0 85 DO I2S DAC channel 0,channel 1 serial data output.

XDAC_SDOUT1 86 DO I2S DAC channel 2,channel 3 serial data output.

XDAC_SDOUT2 87 DO I2S DAC channel 4,channel 5 serial data output.

XDAC_SDOUT3 88 DO I2S DAC channel 6,channel 7 serial data output.

XADC1_MCLK 90 DO I2S ADC 1 and I2S ADC 4 master clock output.

XADC1_LRCK 91 DIO I2S ADC 1 Left/Right sample clock.

XADC1_BCLK 92 DIO I2S ADC 1 bit clock .

XADC1_SDIN 93 DI, PU

I2S ADC 1 serial data input.

XAC97_SDI1/

XADC1_SDIN1 58 DI, PD

I2S ADC 1 serial data input 1. This pin is shared with AC97 serial

data input 1, and determined by XSPI_DOUT/XA1 input

configuration at the rising edge of XRST.

XADC2_MCLK 94 DO I2S ADC 2 master clock output.

XADC2_LRCK 95 DIO I2S ADC 2 Left/Right sample clock.

XADC2_BCLK 96 DIO I2S ADC 2 bit clock .

XADC2_SDIN 97 DI, PU

I2S ADC 2 serial data input.

XGPIO5/

XADC3_MCLK 98 DIO, PD

I2S ADC 3 master clock output. This pin is shared with XGPIO5,

which is determined by XTXD input configuration at the rising

edge of XRST.

XGPIO6/

XADC3_BCLK 99 DIO, PD

I2S ADC 3 bit clock. This pin is shared with XGPIO6, which is

determined by XTXD input configuration at the rising edge of

XRST.

XGPIO7/

XADC3_LRCK 100 DIO, PD

I2S ADC 2 Left/Right sample clock. This pin is shared with

XGPIO7, which is determined by XTXD input configuration at

the rising edge of XRST.

XGPIO8/

XADC3_SDIN 101 DIO, PD

GPIO8, default input. This pin is shared with XADC3_SDIN,

which determined by XTXD input configuration at the rising edge

of XRST.

AC-Link Interface

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

XAC97_BCLK 63 DI, PU

AC97 serial clock input8

XAC97_SDI0 62 DI, PD

AC97 serial data input 0

XAC97_SDI1/

XADC1_SDIN1

58 DI, PD

AC97 serial data input 1. This pin is shared with XADC1_SDIN1,

and determined by XSPI_DOUT/XA1 input configuration at the

rising edge of XRST.

XAC97_SYNC 61 DO AC97 frame synchronization.

XAC97_SDO0 64 DO AC97 serial data output 0.

XAC97_SDO1 59 DO AC97 serial data output 1.

XAC97_RST0 60 DO AC97 codec reset 0.

XAC97_RST1 57 DO AC97 codec reset 1.

XAC97_MCLK 65 DO AC97 master clock 24.5760M for AC97 codec.

Serial Port Interface

XSPI_DIN/

XMSDA 73 DIO, PU

SPI data input. This pin is shared with 2-wire master serial data.

XSPI_CLK/

XMSCL 74 DIO, PU

SPI clock output. This pin is shared with 2-wire master serial

clock.

XSPI_DOUT/

XA1 75 DIO, PU

SPI data output. This pin is shared with 2-wire Codec address A1.

It is also used as XAC97_SDI1 and XADC1_SDIN1

configuration at the rising edge of XRST (input, 1: XAC97_SDI1,

0: XADC1_SDIN1).

XSPI_CEN0/

XA0 77 DIO, PU

SPI chip enable, which select the codec #0 to be controlled. It is

shared with I2C Codec address A0. It is also used as XGPIO3~4

and SSCL/SSDA configuration (input, 1: GPIO3~4, 0:

SSCL/SSDA) at the rising edge of XRST.

XSPI_CEN1/

XCID0 78 DIO, PU

SPI chip enable, which select the codec #1 to be controlled

(output). It is shared with codec ID 0 configuration (input) at the

rising edge of XRST.

XSPI_CEN2/

XCID1 79 DIO, PU

SPI chip enable, which select the codec #2 to be controlled

(output). It is shared with codec ID 1 configuration (input) at the

rising edge of XRST.

XSPI_CEN3/

XCID2 80 DIO, PU

SPI chip enable, which select the codec #3 to be controlled

(output). It is shared with codec ID 2 configuration (input) at the

rising edge of XRST.

XSPI_CEN4/

XEESK 68 DO SPI chip enable, which select the codec #4 to be controlled. It is

shared with EEPROM serial clock.

XSPI_CEN5/

XEEDO 69 DO SPI chip enable, which select the codec #5 to be controlled. It is

shared with EEPROM serial data out.

2-Wire Master Serial Bus

XMSDA/

XSPI_DIN 73 DIO, PU

2-wire serial bus data. This pin is shared with SPI data input.

XMSCL/

XSPI_CLK 74 DIO, PU

2-wire serial bus clock. This pin is shared with SPI clock output.

XA1/

XSPI_DOUT 75 DIO, PU

2-wire serial bus codec address A1 . This pin is shared with SPI

data output. It is also used as XAC97_SDI1 and XADC1_SDIN1

configuration at the rising edge of XRST (input, 1: XAC97_SDI1,

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

0: XADC1_SDIN1).

XA0/

XSPI_CEN0 77 DIO, PU

2-wire serial bus codec address A0 . This pin is shared with SPI

chip enable, which select the codec #0 to be controlled. It is also

used as XGPIO3~4 and SSCL/SSDA configuration (input, 1:

GPIO3~4, 0: SSCL/SSDA) at the rising edge of XRST.

2-Wire Slave Serial Bus

XSSCL/

XGPIO3 52 DIO, PU

2-wire serial bus clock. This pin is shared with XGPIO3.

XSSDA/

XGPIO4 53 DIO, PU

2-wire serial bus data. This pin is shared with XGPIO4.

XMCU_INT 72 DO Interrupt output for external Micro Control Unit (MCU).

XSLAVE_RDY/

XGPIO1 50 DIO, PD

2-wire serial bus data ready. This pin is shared with XGPIO1.

S/PDIF Interface

XSPDIFI 107 DI S/PDIF receiver.

XSPDIFO 116 DO S/PDIF transmitter.

EEPROM Interface

XEECS 67 DIO, PD

EEPROM chip enable (output). It is also used as power on

EEPROM CS delay configuration (input, 0: no delay, 1: delay 1

clock) at the rising edge of XRST

XEESK/

XSPI_CEN4 68 DO EEPROM serial clock. This pin is shared with SPI chip enable,

which select the codec #4 to be controlled

XEEDI 66 DI, PU

EEPROM serial data in

XEEDO/

XSPI_CEN5 69 DO EEPROM serial data out. This pin is shared with SPI chip enable,

which select the codec #5 to be controlled

Jack Detect GPI Interface

XGPI0 108 DI, PD

JACK A detection input

XGPI1 109 DI, PD

JACK B detection input

XGPI2 110 DI, PD

JACK C detection input

XGPI3 111 DI, PD

JACK D detection input

XGPI4 112 DI, PD

JACK E detection input

XGPI5 113 DI, PD

JACK F detection input

GPIO Interface

XGPIO0 49 DIO, PD

GPIO0, default output Low.

XGPIO1/

XSLAVE_RDY 50 DIO, PD

GPIO1, default output Low. This pin is shared with I2C Slave

data

ready.

XGPIO2 51 DIO, PD

GPIO2, default input.

XGPIO3/XSSCL 52 DIO, PU

GPIO3, default output Low. This pin is shared with I2C Slave

serial clock.

XGPIO4/XSSDA 53 DIO, PU

GPIO4, default input. This pin is shared with I2C Slave serial data

XGPIO5/

XADC3_MCLK 98 DIO, PD

GPIO5, default output Low. This pin is shared with

XADC3_MCLK

, which determined by XTXD input configuration

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

at the rising edge of XRST.

XGPIO6/

XADC3_BCLK 99 DIO, PD

GPIO6, default input. This pin is shared with XADC3_BCLK,

which determined by XTXD input configuration at the rising edge

of XRST.

XGPIO7/

XADC3_LRCK 100 DIO, PD

GPIO7, default output Low. This pin is shared with

XADC3_LRCK, which determined by XTXD input configuration

at the rising edge of XRST.

XGPIO8/

XADC3_SDIN 101 DIO, PD

GPIO8, default input. This pin is shared with XADC3_SDIN,

which determined by XTXD input configuration at the rising edge

of XRST.

Headphone Sensing Interface

XHPD_E/

XTEST

103 DIO, PD

Head phone detect enable. This pin is shared with test mode

selection at the rising edge of XRST

XHPD_IN 104 AI Head phone voltage input

XHPD_R1 105 AI Head phone reference resistor 1

XHPD_R2 106 AI Head phone reference resistor 2

Miscellaneous

XTAL1 46 DI 24.576Mhz OSC input

XTAL2 47 DO OSC output

XRSTO 71 DO External Codec reset, can be programmed as Active Low or High

with Register 0x50-bit 2

XPWDN 115 DO Power Down output pin, Active Low, default High

DVDD 6, 19, 32, 45,

56, 76, 89,

117

3.3V power input

DGND 12, 26, 39, 48,

70, 81, 102,

114

Ground

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4. Electrical Characteristics

4.1 Maximum Ratings

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC

Parameter Symbol Min Typ Max Units

Storge temperature - -55 - 150 oC

Operating ambient temperature - 0 25 75 oC

DC supply voltage - 3.0 3.3 3.6 V

I/O pin voltage - GND - VDD V

Power dissipation - - 0.15 - W

4.2 Recommended Operation Conditions

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC

Parameter Symbol Min Typ Max Units

Input voltage range - VDD-0.3

VDD VDD+0.3

Output voltage range - 0 - VDD V

4.3 Power consumption

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC

Parameter Symbol Min Typ Max Units

Supply current : power up - - 40 - mA

Supply current : power down - - 10 - uA

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.4 DC Characteristics

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC

Parameter Symbol Min Typ Max Units

Input voltage range Vin VDD-0.3

VDD VDD+0.3

Output voltage range Vout 0 - VDD V

High level input voltage Vih 0.7VDD - - V

Low level input voltage Vil - - 0.3VDD V

High level output voitage Voh 2.4 - - V

Low level output voltage Vol - 0.4 V

Input leakage current Iil -10 - 10 uA

Output leakage current Iol -10 - 10 uA

Output buffer driver current - - 8 - mA

SPDIF transmit output driver current - - 8 - mA

4.5 AC Timing Characteristics

4.5.1 I2S SIGNAL TIMING

1. SYSTEM CLOCK TIMING

System Clock Timing Diagram

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC,fs=96KHz,MCLK=512fs,24 bit data,unless otherwise stated

System Clock Timing Parameters

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

Parameter Symbol Min Typ Max Units

MCLK clock cycle time tmclk 20 - - ns

MCLK pulse width high tmclkh 10 - - ns

MCLK pulse width high tmclkl 10 - - ns

MCLK duty cycle 40 50 60 %

2. AUDIO INTERFACE TIMING

Audio Interface Timing Diagram

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC,fs=96KHz,MCLK=512fs,24 bit data,unless otherwise stated

Audio Interface Timing Parameters

Parameter Symbol Min Typ Max Units

LRCK propagation delay from BCLK falling

edge Tdl 5 - - ns

SDOUT propagation delay from BCLK falling

edge Tdd 5 - - ns

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.5.2 CONTROL INTERFACE TIMING - 3 - WIRE MODE

Control Interface Timing -3- Wire Diagram

Note: latch data at XSPI_CEN clock low mode , XSPI_CEN clock can be low or high mode

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC,SPI clock 160 ns,unless otherwise stated

Control Interface Timing -3- Wire Parameters

Parameter Symbol Min Typ Max Units

XSPI_CLK

rising edge to XSPI_CEN rising

edge Tscs 120 - - ns

XSPI_CLK pulse cycle time Tscy 160 - - ns

XSPI_CLK pulse width low Tscl 80 - - ns

XSPI_CLK pulse width high Tsch 80 - - ns

XSPI_DOUT to XSPI_CLK set-up time Tdsu 40 - - ns

XSPI_DOUT to XSPI_CLK hold time Tdho 40 - - ns

XSPI_CEN rising to SCLK rising Tcss 40 - - ns

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.5.3 CONTROL INTERFACE TIMING - 2 - WIRE MODE

Control Interface Timing -2- Wire Diagram

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC,2 wire,Fast speed mode,unless otherwise stated

Control Interface Timing -2- Wire Parameters

Parameter Symbol Min Typ Max Units

XMSCL frequency 400 - - KHz

XMSCL pulse width low t1 650 - - ns

XMSCL pulse width high t2 1.3 - - us

Hold time (start condition) t3 650 - - ns

Set-up time (start condition) t4 650 - - ns

Data set-up time t5 650 - - ns

XMSDI,XMSCL rise time t6 100 - - ns

XMSDI,XMSCL fall time t7 100 - - ns

Set-up time (stop condition) t8 650 - - ns

Data hold time t9 650 - - ns

Note: test parameters at 2 wire,Fast speed mode

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.5.4 EEPROM INTERFACE TIMING

EEPROM Interface Timing Diagram

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC,unless otherwise stated

EEPROM Interface Timing Parameters

Parameter Symbol Min Typ Max Units

XEESK clock frequency tsk 555 - - KHz

XEESK high time tskh 900 - - ns

XEESK low time tskl 900 - - ns

XEECS setup time tcss 900 - - ns

XEEDI setup time tdis 900 - - ns

XEECS hold time tcsh 900 - - ns

XEEDI hold time tdih 2 - - ns

Output delay to “1” tpd1 900 - - ns

Output delay to “0” tpd0 30 - - ns

XEECS to status valid tsv 30 - - ns

XEECS to XEEDO in high impedance tdf 30 - - ns

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.5.5 EEPROM AC Timing Characteristics

Symbol Description Min Max Units

fsk SK Clock Frequency 0 0.5 MHz

tskh SK High Time 500 ns

tskl SK Low Time 500 ns

tcss CS Setup Time 100 ns

tcsh CS Hold Time 0 ns

tdis DI Setup Time 200 ns

tdih DI Hold Time 200 ns

tpd0 Output Delay to “0” 500 ns

tpd1 Output Delay to “1” 500 ns

tsv CS to Status Valid 500 ns

tdf CS to DO High Impedance 200 ns

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

4.5.6 AC-LINK TIMING CHARACTERISTICS

Test Conditions

DVDD = 3.3V, DGND =0V,TA=+25oC ,unless otherwise stated

1. COLD RESET

Cold Reset Timing Diagram

Cold Reset Timing Parameters

Parameter Symbol Min Typ Max Units

XAC97_RST active low pulse width Trst_low 1.7 - - us

XAC97_RST inactive to XAC97_B

CLK startup

delay Trst2clk 168 - - ns

# denotes active low.

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

2. WARM RESET

Warm Reset Diagram

Warm Reset Parameters

Parameter Symbol Min Typ Max Units

XAC97_SYNC active high pulse width Tsync_high 1.2 - - us

XAC97_SYNC inactive to XAC97_B

CLK startup

delay Tsync2clk 168 - - ns

3. AC-LINK CLOCKS

BIT_CLK to SYNC Timing Diagram

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

BIT_CLK to SYNC Timing Parameters

Parameter Symbol Min Typ Max Units

XAC97_BCLK frequency 12.288

- - MHz

XAC97_BCLK period Tclk_period 81.4 - - ns

XAC97_BCLK output jitter 750 - - ps

XAC97_BCLK high pulsewidth (note 1) Tclk_high 40.7 - - ns

XAC97_BCLK low pulse width (note 1) Tclk_low 40.7 - - ns

XAC97_SYNC frequency 48.0 - - kHz

XAC97_SYNC period Tsync_period

20.8 - - us

XAC97_SYNC high pulse width Tsync_high 1.3 - - us

XAC97_SYNC low_pulse width Tsync_low 19.5 - - us

Note: Worst case duty cycle restricted to 45/55.

4. DATA SETUP AND HOLD

Data Setup and Hold diagram

Data Setup and Hold Parameters

Parameter Symbol Min Typ Max Units

Setup to falling edge of XAC97_BCLK Tsetup 30 - - ns

Hold from falling edge of XAC97_BCLK Thold 30 - - ns

Note: Setup and hold time parameters for SDATA_IN are with respect to the AC ‘97 Controller.

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

5. SIGNAL RISING AND FALLING TIMES

Signal Rising and Falling Times Diagram

Signal Rising and Falling time Parameters

Parameter Symbol Min Typ Max Units

XAC97_BCLK rising time Triseclk 6 - - ns

XAC97_BCLK falling time Tfallclk 6 - - ns

XAC97_SYNC rising time Trisesync 6 - - ns

XAC97_SYNC falling time Tfallsync 6 - - ns

XAC97_SDI rising time Trisedin 6 - - ns

XAC97_SDI falling time Tfalldin 6 - - ns

XAC97_SDO rising time Trisedout 6 - - ns

XAC97_SDO falling time Tfalldout 6 - - ns

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

5. Mechanical Specification

5.1 Package Dimension

C-Media High Performance PCI Audi o Processor

OxygenTM HD CMI8787 Datasheet v0.5

MEDIA

CONFIDENTIAL

- End of Datasheet -

C-Media Electronics, Inc.

6F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C.

TEL: 886-2-8773-1100 FAX: 886-2-8773-2211

http://www.cmedia.com.tw

For detailed product information, please contact sales@cmedia.com.tw